Standard Analysis - Report generation problem.
Hi,
while generating a report in standard analysis, it says no data records found. Date also were taken care of. For this sales organization first time we are doing the sales, when tried to view the report it give the above message. For all the other sales organizations were coming out correctly which have been used from quite some time.
please suggest
Hello,
MCL1 - WMS: Stck Placemt.+Remov. Selection
MCL5 - WMS: Flow of Quantities Selection
MCL9 - WM: Material Placement/Removal: Selection
MCLD - WM: Material Flow - Selection
MCLH - WM: Movement Types - Selection
Hope this help you for analysis
Reward
Regards,
Kumar
Similar Messages
-
Standard analysis report in wm
Dear all,
is there any t .code avail for standard analysis report in WM like MC.9,MCBE etc available in MM.
if avail kindly inform me.
Thanx in advance.
veluHello,
MCL1 - WMS: Stck Placemt.+Remov. Selection
MCL5 - WMS: Flow of Quantities Selection
MCL9 - WM: Material Placement/Removal: Selection
MCLD - WM: Material Flow - Selection
MCLH - WM: Movement Types - Selection
Hope this help you for analysis
Reward
Regards,
Kumar -
Report generation problems on the WinNT target machine
I'm using report generation VI's to generate a standard report, mixed with text and graphs.
In development mode (LV 6.0.2; Win-NT 4.0 SP6)there are no problems to print it. As soon as I make an application (application builder 6.0) and transfer it to the target machine (Win-NT 4.0 SP6; run time engine 6.0.2) I get an error -2147352567 unable to load picture..to Append front panel image to report.vi> If I delete the VI "Append front panel image to report.vi", I can print the text of my report without problems. Do you have any idea?I could fix the bug in the meantime. I had installed an older version of the Internet Explorer. When I updated the target PC to Internet Explorer Vers. 5.5, there are no problems anymore. I think it must be a problem of ActivX.
-
Word report generation problem
I have a problem with my report generation toolkit. I have programmed a test program (main_program), where i can load a data and print it to a word document.
First i have to load the data(data.txt) and then i have to push the print button.
The header of my is ok, but when the Subvi (write2) tried to generate the graph in the Document always an error occured!
I got an error message but i don*t found the reason why the program stops!?
Error Message:
Fehler -2146827284 ist bei Exception occured in Microsoft Graph, Die Interior-Eigenschaft des Series-Objektes kann nicht zugeordnet werden.. Help Path is C:\Programme\Microsoft Office\OFFICE11\1031\graph10.chm and context 0 in Word_Set_Chart_Colors.vi->Word Set Graph Colors.vi->write2.vi->Report.vi->Main_program.vi aufgetreten
Could sombebody help me, please???
Best regards,
Peter
Labview 7.1 on Windows 2000
Attachments:
program.zip 94 KBAnother question....
I want to make a axis label for the y-axis. I can do this with the "word set graph font.vi"!
But when i make this, the label is horizontally. Where can i change this label to vertical???
see the attachement....
Best regards,
PETER
Labview 7.1 on Windows 2000
Attachments:
word.jpg 30 KB -
BI Publisher Report generation problem in Siebel
Hi Experts,
Here is the scenario, let's say i have 2 BIP reports in siebel, named Report A and Report B. i tried using 1500 records to generate Report A and Report B. I view the status of the reports in My BI Publisher View in Siebel, i noticed that after 5 hours, Report A is successfully generated, and report B still doesn't show if it successful or not, after 2 days, report B still doesn't show if it is successful or not.
Based on the scenario above, here are my questions:
a.) is there a way that we can increase the report generation for BI Publisher integrated with Siebel? 5 hrs of generating 1500 records i think is too slow, specially if that specific report is required to be generated everyday.
b.) do you know why Report B still doesn't show if it successfully generated eventhough both reports was generated using equal amount of records?
Thanks in advance! :)Here are the two steps I took to get the VI to work on my machine:
1) Recompiled the code by ctrl-shift-clicking on the run arrow.
2) Changed the string in the 3rd frame of the sequence that goes into the Append Front Panel Image to Report from I Graph plot.vi to I_Graph_plot.vi.
After making the changes I did a File->Save All. -
Hey all,
has anybody seen this error?
An Error prevented report generation.
Error class: jet.jectc.ReadFailureExecption
Error message: ..\reporting\canned\Novell
Reporting\Zen5Inventory\en\Zen5Inventory.cat cannot be found.
How do I Fix it?
thanksI have tried that. It did not work. I'm not sure as to whether I
should look for the Zen5Inventory.cat file on the server, or
workstation. Also, I am running ZEN 3.0 with SP1a applied.
Shaun Pond wrote:
> Charles,
>
> does this help?
> http://support.novell.com/cgi-bin/se...?/10064168.htm
> (Incidentally, you can also find this by going to the Knowledgebase
> http://support.novell.com/search/kb_index.jsp and entering the TID > number, you can also search for other TIDs by entering words or
> phrases, such as an error message).
> -
Web Analysis report loading problem
Hi,
I have made my report on Web Analysis. I could open and edit it till yesterday. But now whenevr I try to open it I get an error popped up saying "Error loading document". I am not able to figure out why am i facing this problem. Could anybody please help me on same.Just check with your (essbase)administrator has set any security filters to the users having this problem
- Natesh -
PDF reports generation problem from single oracle reports in 10G
Hi All,
i am generating 4 PDF reports from one Oracle reports in 10 G.
i used RUN_REPORT_OBJECT built in 4 times with some different parameter list at a single time.
some time it generates but some time it generate 2 or 3 out of 4.
Can you anyone help me on this issue.
Regards,
Abhishek
Code that i used for generation of report:
on key-F0:
DECLARE
PL_ID PARAMLIST;
PL_NAME VARCHAR2(10) := 'REP';
USRNM VARCHAR2(50);
pl_id2 paramlist;
pl_name2 varchar2(10):= 'REP';
usrnm2 varchar2(50);
pl_id3 paramlist;
pl_name3 varchar2(10):= 'REP';
usrnm3 varchar2(50);
pl_id4 paramlist;
pl_name4 varchar2(10):= 'REP';
usrnm4 varchar2(50);
BEGIN
USRNM := GET_APPLICATION_PROPERTY(USERNAME);
PL_ID := GET_PARAMETER_LIST(PL_NAME);
IF NOT ID_NULL(PL_ID) THEN
DESTROY_PARAMETER_LIST(PL_ID);
END IF;
PL_ID := CREATE_PARAMETER_LIST(PL_NAME);
IF ID_NULL(PL_ID) THEN
MESSAGE('Error Creating Parameter List ');
END IF;
ADD_PARAMETER(PL_ID, 'P_PRNT_C_FAM_ID', TEXT_PARAMETER, :PRNT_C_FAM_ID);
ADD_PARAMETER(PL_ID, 'P_NOTICE_DATE', TEXT_PARAMETER, TO_CHAR(:FRONT_END.NOTICE_DATE,'MM/DD/RRRR'));
ADD_PARAMETER(PL_ID, 'P_REDET_DATE', TEXT_PARAMETER, TO_CHAR(:FRONT_END.REDET_DATE,'MM/DD/RRRR'));
ADD_PARAMETER(PL_ID, 'USR_NM', TEXT_PARAMETER, USRNM);
ADD_PARAMETER(PL_ID, 'SCHEDULE', TEXT_PARAMETER, :RUN_TIME);
ADD_PARAMETER(PL_ID,'P_PRNT_PROV',TEXT_PARAMETER,'PRNT');
ADD_PARAMETER(PL_ID, 'P_ENG_SP', TEXT_PARAMETER,'N');
REDET_REPORT('506',PL_ID,'CT506_Parent_FamId_Eng'||To_Char(sysdate,'MMDDRRRR-HHMISS'));
USRNM2 := GET_APPLICATION_PROPERTY(USERNAME);
PL_ID2 := GET_PARAMETER_LIST(PL_NAME2);
IF NOT ID_NULL(PL_ID2) THEN
DESTROY_PARAMETER_LIST(PL_ID2);
END IF;
PL_ID2 := CREATE_PARAMETER_LIST(PL_NAME2);
IF ID_NULL(PL_ID2) THEN
MESSAGE('Error Creating Parameter List');
END IF;
ADD_PARAMETER(PL_ID2,'P_PRNT_C_FAM_ID',TEXT_PARAMETER,:PRNT_C_FAM_ID);
ADD_PARAMETER(PL_ID2,'P_NOTICE_DATE',TEXT_PARAMETER,TO_CHAR(:FRONT_END.NOTICE_DATE,'MM/DD/RRRR'));
ADD_PARAMETER(PL_ID2,'P_REDET_DATE',TEXT_PARAMETER,TO_CHAR(:FRONT_END.REDET_DATE,'MM/DD/RRRR'));
ADD_PARAMETER(PL_ID2,'USR_NM',TEXT_PARAMETER,USRNM2);
ADD_PARAMETER(PL_ID2,'SCHEDULE',TEXT_PARAMETER,:RUN_TIME);
ADD_PARAMETER(PL_ID2,'P_PRNT_PROV',TEXT_PARAMETER,'PRNT');
ADD_PARAMETER(PL_ID2,'P_ENG_SP',TEXT_PARAMETER,'Y');
REDET_REPORT('506',PL_ID2,'CT506_Parent_FamId_Sp'||To_Char(sysdate,'MMDDRRRR-HHMISS'));
USRNM3 := GET_APPLICATION_PROPERTY(USERNAME);
PL_ID3 := GET_PARAMETER_LIST(PL_NAME3);
IF NOT ID_NULL(PL_ID3) THEN
DESTROY_PARAMETER_LIST(PL_ID3);
END IF;
PL_ID3 := CREATE_PARAMETER_LIST(PL_NAME3);
IF ID_NULL(PL_ID3) THEN
MESSAGE('Error Creating Parameter List');
END IF;
ADD_PARAMETER(PL_ID3,'P_PRNT_C_FAM_ID',TEXT_PARAMETER,:PRNT_C_FAM_ID);
ADD_PARAMETER(PL_ID3,'P_NOTICE_DATE',TEXT_PARAMETER,TO_CHAR(:FRONT_END.NOTICE_DATE,'MM/DD/RRRR'));
ADD_PARAMETER(PL_ID3,'P_REDET_DATE',TEXT_PARAMETER,TO_CHAR(:FRONT_END.REDET_DATE,'MM/DD/RRRR'));
ADD_PARAMETER(PL_ID3,'USR_NM',TEXT_PARAMETER,USRNM3);
ADD_PARAMETER(PL_ID3,'SCHEDULE',TEXT_PARAMETER,:RUN_TIME);
ADD_PARAMETER(PL_ID3,'P_PRNT_PROV',TEXT_PARAMETER,'PROV');
ADD_PARAMETER(PL_ID3,'P_ENG_SP',TEXT_PARAMETER,'N');
REDET_REPORT('506',PL_ID3,'CT506_Prov_ProvId_Eng'||To_Char(sysdate,'MMDDRRRR-HHMISS'));
USRNM4 := GET_APPLICATION_PROPERTY(USERNAME);
PL_ID4 := GET_PARAMETER_LIST(PL_NAME4);
IF NOT ID_NULL(PL_ID4) THEN
DESTROY_PARAMETER_LIST(PL_ID4);
END IF;
PL_ID4 := CREATE_PARAMETER_LIST(PL_NAME4);
IF ID_NULL(PL_ID4) THEN
MESSAGE('Error Creating Parameter List');
END IF;
ADD_PARAMETER(PL_ID4,'P_PRNT_C_FAM_ID',TEXT_PARAMETER,:PRNT_C_FAM_ID);
ADD_PARAMETER(PL_ID4,'P_NOTICE_DATE',TEXT_PARAMETER,TO_CHAR(:FRONT_END.NOTICE_DATE,'MM/DD/RRRR'));
ADD_PARAMETER(PL_ID4,'P_REDET_DATE',TEXT_PARAMETER,TO_CHAR(:FRONT_END.REDET_DATE,'MM/DD/RRRR'));
ADD_PARAMETER(PL_ID4,'USR_NM',TEXT_PARAMETER,USRNM4);
ADD_PARAMETER(PL_ID4,'SCHEDULE',TEXT_PARAMETER,:RUN_TIME);
ADD_PARAMETER(PL_ID4,'P_PRNT_PROV',TEXT_PARAMETER,'PROV');
ADD_PARAMETER(PL_ID4,'P_ENG_SP',TEXT_PARAMETER,'Y');
REDET_REPORT('506',PL_ID4,'CT506_Prov_ProvId_Sp'||To_Char(sysdate,'MMDDRRRR-HHMISS'));
Message('Notice Submitted For Printing');
EXIT_FORM;
END;
Program unit:
PROCEDURE REDET_REPORT(rep_name in Varchar2,plist in ParamList,rep_pdf_name in Varchar2)IS
filecode varchar(2);
Repnm varchar(30);
report_id REPORT_OBJECT;
report_id_hear REPORT_OBJECT;
report_prop VARCHAR2(20);
v_rep VARCHAR2(100);
rep_status VARCHAR2(200);
bat_loc varchar2(200);
time_slot varchar2(100);
rep_folder_name varchar2(100):='Redet Notice for Packets Sent\';
BEGIN
Filecode := init.GetFileNmCode;
if filecode 'FL' then
if upper(substr(rep_name,1,2)) ='CC' then
RepNm := filecode||substr(rep_name,3);
else
if rep_name != 'viewerr' then
RepNm := filecode||rep_name;
else
RepNm := rep_name;
end if;
end if;
end if;
Begin
begin
report_id := find_report_object(RepNm);
if error_code = '41219' then
Message('Unable to execute : '|| RepNm);
Raise FORM_TRIGGER_FAILURE;
end if;
end;
set_report_object_property(report_id, REPORT_FILENAME, RepNm);
set_report_object_property(report_id, REPORT_SERVER, init.Appl_Repserver);
SET_REPORT_OBJECT_PROPERTY(report_id, REPORT_EXECUTION_MODE, BATCH);
SET_REPORT_OBJECT_PROPERTY(report_id, REPORT_COMM_MODE,SYNCHRONOUS);
set_report_object_property(report_id, REPORT_DESFORMAT,'PDF');
select rprm_param_val||rep_folder_name||rep_pdf_name||'.pdf' into bat_loc from rprm where rprm_param_name = 'BAT_LOC';
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_DESTYPE,FILE);
SET_REPORT_OBJECT_PROPERTY(REPORT_ID,REPORT_DESNAME,'"'||bat_loc||'"');
begin
v_rep := RUN_REPORT_OBJECT(report_id,plist);
exception when others then
Message('Error While executing running reports ::'||error_code);
end;
end;
END;Thanx Frank
Well one solution is that i can decrease the length of my report name and the problem does not occur than.
any ways thanx ..but where to get the patch from.
Kindly provide me with the link if possible.
Thanx,
Qaiser Qayyum Malik.
[email protected] -
First, I tried posting the question coming up in a web case,
but that was on 9/27. Anyone know what the
est. time is to expect a response?
In the mean time, maybe one of you could help?
Our tech support person installed RoboHelp Server.
When trying to access the reports, we're getting this
error...
Server object error 'ASP 0178 : 80070005'
Server.CreateObject Access Error
/robo/reports/Report_API.asp, line 105
The call to Server.CreateObject failed while checking
permissions. Access is denied to this object.
Any suggestions on what to look for?
Here's what we're using...
OS: Windows 2003
Web Server: Microsoft IIS 6
Browser: Microsoft IE
Database: Access
Thanks
DougThe way to get around the timeout problem is to get rid of the timeout. If you have a real business requirement that you have to run a query that takes 30 minutes then it conflicts with the other business requirement that queries aren't allowed to take more than 3 minutes. Conflicts between requirements should be resolved by managers or designers, not by programmers whose job is only to implement designs.
-
Report generation problem in 6.1
Attached file worked fine under LabView 6i but not in 6.1. The problem seems to be with the Set Report Font VI which doesn't like the words "Arial". Anyone else had this problem or is it something peculiar to my PC?
Attachments:
I_Graph_plot.vi 570 KBHere are the two steps I took to get the VI to work on my machine:
1) Recompiled the code by ctrl-shift-clicking on the run arrow.
2) Changed the string in the 3rd frame of the sequence that goes into the Append Front Panel Image to Report from I Graph plot.vi to I_Graph_plot.vi.
After making the changes I did a File->Save All. -
Query report generation problem
Hi,
I want to know how to view the queryvalues without variable screen but after report showing the values if i click the variable screen option it should show the screen.
If u know pls tell me.
Thanks and regds,
S.Girikumar.from what i understand you would like this below functionality:
1) Run the report without giving the values in the variable screen.
2) use the variable screen now to select the values.
one of the possible solution:
1) remove the mandatory option for all the variables
eg: bex > 0customer > char values > select the variable > edit > remove mandatory option
2) run the query
3) you will be prompted with the variable screen, just say yes, without entering any values.
4) report is displayed
5) press the refresh button
6) variable screen is displayed
7) give the variable values now.
let me know if i interpreted the questions wrong.
Thanks,
BWer
Assing points if helpful. -
Simple report generation problem
how to list all stock position for a choosen material for a choosen storage location in a given plant?
Hello zäpfle,
This is actually a known issue and already reported to NI R&D. As you mentioned, to solve this, you have to open and close the Excel report (with Word report everything seems to be fine). Since the task is closed just after the VI closes or open-and-close Excel, it seemed that not all references would close properly. The issue though isn't with properly closing the references, but rather deeper. However, a possible workaround would be to programmatically end the process just after closing the reference to Excel. Here is a link to a community example that demonstrates how to do just that:
Kill a task in Windows using System Exec.vi
https://decibel.ni.com/content/docs/DOC-9275
Hope this helped. I am sorry for the inconvenience!
Kind regards,
Ioannis Karakatsanis
Applications Engineering
www.ni.com/support -
I having trouble with ARD 3.1 generating reports. I select a remote computer to run a report on and then it queues. The report than hangs in the process of generating. In activity monitor ARD shoots up to 145% use of CPU when the report tries to generate. the ARD Agent then goes to "Not Responding". Also several times ARD has completely crashed when attempting reports. No firewalls are running and the test computer I'm trying to reach is on the same subnet. Any ideas?
MacBookPro Core2Duo Mac OS X (10.4.8)I have been having problems generating reports.
Constant messing around, trying, failing, changing prefs etc. has fixed the problem almost 100%. This using ARD 3.1 on machines on the LAN (Airport) and via the internet.
However ... there is a single report (Application Usage) on one machine, via the internet, which I can see being 'Collected' via the Task progress, but it crashes ARD 3.1 instantly every time when it starts to transfer to my Admin machine.
This leads me to suspect that the Report Generation problems have more to do with Cache issues, than anything else. (Rebuilding the report doesn't help).
Does anyone have any specific info on what and where ARD 3.1 keeps its caches?
AluBook 17 Mac OS X (10.4.8) -
I have a serious problem with a invoice report that doesn't display all the lines and only prints on one page but the total is correct please help not a guru
Check the properties of your outer most frame in the report, vertical sizing should be variable, it is not a report generation problem but a printing problem that is why
your totals are correct. -
.tdms report generation with .pdf format
Hi,
My problem is a kind of report generation problem.My data logging format is .tdms format and i use tdm file viewer function to view my datas but i didnt use tdm data report generation function.How can i use this function with my code.Actually i want to print automatically like pdf format...
Attachments:
ustalt.vi 62 KBkacco wrote:
Hi Yye,
İ use diadem and labview 09. I know diadem is very good solution to view data but i want to print automaically.My data type is .tdms(test data management system) if u look my .vi you can understand.
ı want to print aoutomatically with my channel and group.
I can see from your code that you are a beginner. Your coding style is very Labview no-no. But well every Labview pro have some time been a beginner I have some problems understanding or grasp the essence of your problem. Can you post your failed attempt to use rapport generation. It would help in the understanding of your problem.
Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
(Sorry no Labview "brag list" so far)
Maybe you are looking for
-
My Ipod Touch 4th Generation is connected to wi-fi and will not open the app store. Says it cannot connect to iTunes Store. I can get on the internet but for some reason it won't connect to the app store or the Software Updates.
-
i ahve tried to update software on my ipad it states in verification that it is not connected to wifi,yet it is safari is working
-
Data replication from R3 to CRM
Hi Experts, My requirement is to fill the Category field of CRMD_ACTIVIY_H table in CRM with the BSARK field of VBKD table in R3. For this I have tried to implement the logic in the method CRM_DATAEXCH_R3D_MBDOC_FILL of BADI CRM_DATAEXCHG_BADI, but u
-
Please help!
-
How to configure sap maxdb client to connect to SAP ERP system (SAP HR)
Hello all, I am currently installing live cache for SAP ERP HR application(Idoc), can anybody tell me the sequence to proceed to configure SAP livecache with SAP ERP system. i am doing following steps 1. Install SAP DB using installation MAXDB CDs 2.