Standard and actual costing run

I am doing actual coting run ckmlcp every month end on last of the month. stadard costing run I am doing on start of the month on 1st day of the month before actual transactions taking place.
Here the problem is I already did the stadard costing and actual costing runfor april, now i want to do stadard costing today midnight 1AM for june and I want to do actual costing tomarrow evening 6PM for may.
April stadard price is Rs150 and current stadard price is Rs 160 beacause of 1st june costing run. If I will do the costing for May month now means (1st)tomarrow evening which stadard price it will pick in ckmlcp and varience calculated.

as cost estimate is run for the material in plant u can not get cogs at depot level.
Edited by: kumaraguru v on Jan 17, 2008 12:24 PM
Edited by: kumaraguru v on Jan 17, 2008 12:25 PM

Similar Messages

Transferring Standard and Actual costs to COPA

Hi,
We are using 3 valuations (Legal, Profit Center and Group Valuations). In order to transfer standard and actual costs to COPA for all 3 valuations do we need to create 3 costings (total 6) for transferring standard and and 3 costings keys for transferring actual costing to COPA?
Thanks.

Hi Ravi.
Very interesting question!
1: Ledgers in FI are not related with Material Ledger Valuation. EG, in FI you can have IFRS, TAX, and GAAP; and in ML You can have "currency/valuations" Legal, PCA / Group. Keep in mind this are different stuff.
2: In Material Ledger, you can valuate your stock according to different ledgers, with the bussiness function FIN_CO_COGM (Paralell cost of goods manufactured). The idea of this BF is have alternative valuations assigned to the principles (IFRS, TAX, GAAP), so in FI you can accomplish different Stocks, COGS and on accounts, based on different accounting principles. You can understand this as the brothers of FI Ledgers, in order to do product costing.
3: In PA, you only post (or transfer) one record. You have to decide if use "Local, Group, PCA or Paralell Cost of Goods Manufactured". (Im 90% sure based on lot of reading, maybe im missing somethings).
Please, check this old post. Waman is a good source of info!
CO-PA & IFRS
Hi Waman!Waman Shirwaicar Could you please clarify the concept? This is a topic that there are not much info!
Arturo.

Standard Vs Actual Cost report for Production Order

Hi Expert,
I have an requirement that i need report for Standard Cost (CK40N) and Actual cost (261 Movement) for multiple production order or Multiple Material.
Please suggest standard report if available or FS for creating Z Report.
Regards,
Pranav

Hi Pranav
There are Standard reports
Option 1
You can use Product Drilldown reports in KKO0
For this:-
a. Do settings in OKN0 - assign a Cost Comp Structure and Choose Material group = Product Group
b. Run KKRV to collect data and then use KKO0 reports
I have replied this in SCN many times.. You can search here. Just google as "SCN" "Ajay Maheshwari" "OKN0" and you can see some posts answered by me
Option 2
You can use Summarization Hierarchy KKBC_HOE
For this
a. Set up Summ Hierarchy in KKR0.
b. Run KKRC
c. Run KKBC_HOE report
Br Ajay M

Target Cost and Actual Cost

Hi All,
When is the target cost and actual cost gets populated and from where does the data comes from liek labour,machine,overhead cost comes?
Thanks in advance

Dear Friend,
speaking from controlling point of view, target and actual costs will be flown from "costing variant planned" and "costing variant actual" respectively.In above mentioned varinats, whats the process has to be followed to calculate material costs,activty costs,overhead costs etc will be defined. These variants will be assigned in order type dependent parameters OPL8.
Target Costs - In standard cost estimate(ck11n),target cost will be calculated in the following way
                          -material cost from material master and BOM
                          - activity costs from routing( for this u need to plan the activity costs in KP26)
                          - other costs from the definitions of planned costing variant.
                   - after running the standard cost estimate,u need to mark n release(ck24).
Actual Costs - material costs frm goods issues (via goods mvmts thru MBIA,MB1B etc) against
                      production/process order.
                          - activity costs(as per the price u plannned in KP26)through operation confirmation in
                            COR6N/CO11N.
                          - any other costs like overheads,cost center issues etc as per the process defined
                            in 'actual costing variant'.
Hope this will clear your doubt.
Rams.

Report for bom wise target and actual cost as well as qty at line item

Dear Experts,
Is there any standard tcode for bom wise target and actual cost as well as qty at line item level for the month.
there is one tcode s_alr_87013127 but user has to double click in order to get line item details.
I want to see line item wise breakup/bom wise target and cost cost as well as qty.
Thanks in advance.
regards
RK

Dear experts,
I am still looking for a revert.
regards
RK

Function module for calculating planned and actual cost of production order

Hi ,
Do we have any standard function module for calculating planned and actual cost for production order?
i need to implement this in a Z-report.
Thanks
Srini

Hi,
try below function module
CRMCO_GET_PLAN_ACTUAL_COSTS
CO_IH_GET_PLANNED_COSTS_TOTAL
Regards,
Sankaran

PLANNED AND ACTUAL COST IN A PROCESS ORDER

From where the planned cost of material and activity types in cost itemizationafter creation flow ?From where the actual cost of a material and activity types in cost analysis of process order after confirmation flow?

You may be knowing you give Costing Variants ( Both actual as well as Planned ) in Order type. These Costing variants contains Valuation variants which says which costs are to be taken while creation ( for Planned Cost ) and Actual cost ( while confirming and Moving Goods) to be calculate. These Variants decides mode of Cost Flows.
Now, Data in Planned costs are Standard Cost figures or Current prices for material or Planned Prices of Activities.
As far as Actual costs are considered it may be the price for the consumed quantity @ the moving average price of the day or activity price for the qty. consumed which include up planned consumption too.....
Reward if you find useful

Dashboard content is not populated with Planned Cost and Actual Cost

Hi
We are working in cProjects 4.0 + ECC 6.0 implementation. I could not get the data for columns in Planned Cost and Actual Cost in cProjects Project Dashboard. I have properly mapped the config settings and created and assigned a Project in PS
Has anybody got this data in the Dashboard?
Kindly suggest the solution
with regards,
K Rama Krishna
9394712743

Hi Rama,
It is difficult to say, where the problem is.
but typically, the causes of the problem are
customizing is set incorrectly or the evaluation is not carried out.
You can run the the evaluation DPR_EVE_BATCH_DPO additionally, please untick the flag 'check the last changed date'.
Hope, it helps.
Kind regards,
Zhenbo

Material Ledger-Actual costing Run

Deal All,
I would like to run actual costing for previous period and current period (April-Mar)
08-Nov
09-Dec
But I have not done the period end closing for prior perods means 01-07.
If I do now actual cost run for 08 & 09 what will be the impact on systems?
Best Regards,
Sbpsbp

Hi,
Basically a monthly Material Ledger closing should be processed in all period, so you already have shifted a period in material master, you cannot processed a couple of preceding months with some error: C712 or C805 etc.
If you are facing above situation, please check SAP Note 361236.

In which table production order planned cost and actual cost i can see?

Dear PP Guru,s,
from which table i can see productuion order planned and actaul cost. i checked following tables AUFK, AFVC, AFVV, CAUFV, AFRU, AFKO, AFPO. but i did not found planned cost and actual cost field. is there any other way to get this data with respect production order?
Regards,
sree

Dear,
Planned and actual costs of prod order from COEP, COSS, COSP S027 tables
production order shows the planned cost based on the quantity structure.
Please refer my reply in this thread for details,
Re: Actual Halb Material Cost
Regards,
R.Brahmankar

Target cost and actual cost not picking in production order

Hello,
The target cost and actual cost is not updating in production order when I display it in CO03 in cost analysis.
Even though we have maintained planned price in KP26.
Please suggest how it can be populated.
Best Regards,
Tapan

Hi Tapan
For Target cost
1. Your std cost must be released before Goods Receipt
2. There must be goods receipt posted on the prod order
3. You must calculate variances in KKS1/2
For Actual Cost
1. Post Goods receipt and Goods issues
2. See if any mat movements are pending in COGI
3. Ensure that operation is confirmed in PP and no entry is lying in COFC
Regards
Ajay M

Table for Production order planned and Actual cost

Hi Experts,
Can anybody please tell me the name of table where Production order planned and Actual cost gets saved ?
Thanks in advance.
Regards,
Bijay

Table COEP
don't forget the points

Function Module to find Planned Costs and Actual Costs against WBS element

Dear All,
We have a requirement where we need to find out the Planned Costs and Actual Costs booked against a WBS element, in a year. The costs can be against all the plan versions or on individual plan version.
Are there any function modules to retrieve this value?
Thanks for the help.
Warm Regards,
Judith

Hi,
The easiest way would be to get the OBJNR for all WBS elements from PRPS and look up RPSCO and summarize for Value type (RPSCO-WRTTP) 1 for planned cost and 4 for Actual cost.
Please let me know if this helps.
jibat

Estimated Cost and Actual Cost

Hi Friends,
Can someone tell me, which MM tables(logically database) has these fields stored?? Estimated cost and Actual cost??
Note : Where and How can I find the logical data base??
Thanks alot in advance,

Yes thank so much for your quick help.
I see here we can get 1- Plan cots , 4 Actual cost, But in PMCO, how can we get the estimated cost, I see that WRTTP = 1 also contain the value for estimated cost but not plan cost . Please help me.
Thanks

IW32 needed Plan Cost and Actual Cost table name

Hello ,
In IW32 transaction Plan Cost and Actual cost in cost tab ---Table Name.
Req: needed plan cost & actual cost table names for particular order number.( For New Report )
Can you please let me know where Plan cost & actual cost get stored in IW32 in Cost tab ( table name / function module name ) or how its get calcualted for particular order number.
Thanks in advance !
Regards
Rahul

hi ,
i too had same issue , i wrote following FS for that :
Actual and planned cost from PMCO-WRT00 to WRT12(the sum of values should be considered for actual as well as planned ) for PMCO-OBJNR taken from CAUFV -OBJNR for order number AFIH-AUFNR and also currency from CAUFV-WAERS .
Actual cost will have valuation type PMCO-WRTTP = 4 and planned cost will have valuation type PMCO-WRTTP = 1 , which will be placed in different column
hope this helps
regards
satish

Standard and actual costing run

Similar Messages

Maybe you are looking for