Standard and Customer Tasks

Hi Experts,
What is the main Difference between standard and customer taks.
Both are created using transaction PFTC.
So what is the significance of Standard Tasks.
Thanks,
Points will be rewarded for all helps.

SAP documentation states the following differences between standard and customer task
Standard Task:
Cross-client, any plan version, no validity period
Customer Task:
Client-specific, plan version-specific, validity period
They have also mentioned
"To implement your own requirements, use only standard tasks. There will no longer be functional enhancements for customer tasks."
So preferable to use Standard tasks for all developments..
Thanks & Regards,
Prasath N

Similar Messages

Standard and customized reports

Experts,
I'm given a requirement to create some reports. Was hoping someone can help me with which are standard and customized reports from this list :
OPEN PURCHASE ORDER REPORT
OPEN REQUISITION REPORT
OPEN RFQ REPORT
PURCHASE ORDER CONFIRMATION REPORT
STOCK ITEMS RE-ORDER
STOCK ITEMS RESERVED
STOCK ITEMS ABOVE STOCK MAX
STOCK ITEMS BELOW STOCK MIN
STOCK ITEMS DETAILS
STOCK ITEMS INVENTORY CONTROL
STOCK ITEMS LIST BY NUMBER
STOCK ITEMS MOST USED
STOCK ITEMS NOT USED
STOCK ITEMS ORDER BY COST
STOCK ITEMS ORDER BY LOCATION
STOCK ITEMS ORDER BY VENDOR
STOCK ITEMS OVER RESERVED
STOCK ITEMS STATUS
STOCK ITEMS VALUE
VENDOR PERFORMANCE REPORT
Regards,

Hi,
SAP Std. Reports     Description                                                                          Z-Dev
ME2N / ME2M / ME2L     OPEN PURCHASE ORDER REPORT
ME5A                          OPEN REQUISITION REPORT
ME4N / ME4M / ME4L     OPEN RFQ REPORT
ME2A / VL06I     PURCHASE ORDER CONFIRMATION REPORT
MB53                          STOCK ITEMS RE-ORDER                                                     ABAP Report
MB24 / MB25                          STOCK ITEMS RESERVED
                          STOCK ITEMS ABOVE STOCK MAX                                ABAP Report
                          STOCK ITEMS BELOW STOCK MIN                                ABAP Report
MMBE / MB52     STOCK ITEMS DETAILS
MC.1 / MC.9                           STOCK ITEMS INVENTORY CONTROL
MMBE / MB52     STOCK ITEMS LIST BY NUMBER
MC46                           STOCK ITEMS MOST USED
MC50                           STOCK ITEMS NOT USED
ME2N / ME2M / ME2L     STOCK ITEMS ORDER BY COST
ME2N / ME2M / ME2L     STOCK ITEMS ORDER BY LOCATION
ME2L                          STOCK ITEMS ORDER BY VENDOR
MB24/MB25                           STOCK ITEMS OVER RESERVED                                        ABAP Report
MMBE/MB53                           STOCK ITEMS STATUS
MB52                           STOCK ITEMS VALUE
ME6H                           VENDOR PERFORMANCE REPORT

How to find all those list of SAP standard and custom objects that are changed from a specific point of time

Hi all,
Please let me know the process to track or find all the SAP Standard and custom objects. that got changed from a specific point of time.
Is there any function module or any table where this change log is maintained.?
I just only need the details ,wheather that SAP standard or Custom object has got changed or not.
Thanks in advance

Hi RK v ,
I really don't know what your actual requirement is , but if you want to know the objects as per the modification , then transport request will be much help to you .
Have a look into table E070 and E071 .
Regards ,
Yogendra Bhaskar

Standard And Customized BEx Reports & workbooks for the Modules FI,SD,MM

Hi..All
Can any one explain about Standard and customized BEx Reports and workbooks which were frequently used in implementation projects for the modules SD,MM and FI?
Thanks & Regards
Jonn

Hi John,
Find below some of FI(AP) queries....
1.Accounts Receivable: Payment History -0FIAR_C05_Q0001
2.Accounts Receivable: Overdue Analysis -0FIAR_C03_Q0005
3.Accounts Receivable: Days Agreed / Days Taken -0FIAR_C03_Q0001
you can find some queries in help.sap.com
I don;t remember the queries used for other modules...you can refer the below link and identify the queries most usefull for your requirements...
help.sap.com/bw
thanks,
vachan

Difference between AcroPDF.dll and Acrobat.exe while loading standard and custom plug_ins

Hi,
I want to know the difference of behavior when AcroPDF.dll loading the PDF file in the internet explorer and Acrobat.exe application loading PDF in context of plug_ins developed by Adobe or Custom plug_ins using SDK.
When I am loading PDF within Acrobat.exe all the plug_ins (Standard as well as Custom) loaded successfully and working fine but at the same time if I am loading a document within Internet Explorer, behind the scene internet explorer using AcroPDF.dll which is ActiveX for IE to load PDF and it is trying to load plug_ins (standard and custom) but some how my custom plug_in is destroyed or currpted and it is not working any more.
I want to know how AcroPDF and Acrobat.exe using AcroExch.App class or using any other thing to load plug_ins?
Thanks,
Twinkle

For this level of support, you join our developers/partners program and submit a formal support request.

Export standard and Custom report to xls / word / power point ??

Hi
Apps: 12.1.3
DB 11gR1
Is there any tool so that i can save standard and Custom report to xls / word / power point ??
Thanks
Vishwa

There are a few third party tools that let you do that.
Some such tools are Monarch, Rep2excel etc.
Google for "convert oracle report to excel" and you will get a few more hits.
The best way to get it in Excel is to change the output format to XML and write a quick XML publisher template.
Hope this helps
Sandeep Gandhi
Independent Consultant

Are these Standard and Customized elements???

Hello friends,
I am trying to duplicate the work of a consultant who is not working for us any more.
I have copy and pasted the ZBAPIS and other data elements, structures etc.,
When I try to activate I am getting some messages like some of the structures and elements etc. are not found. But they don't start with 'Z' and so I think they are standard. When I try to look for it on our server I am not able to find them at all.
The error messages that I am seeing while activating these ZBAPI's.
1. FORM "FILL_OUTPUT_RETURN" Doesn't Exist
2. The field 'KOTD504' is unknown.
3. The Dictionary structure or table "A642" is either not active or does not exist.
Any response or feedback will be greatly appreciated.
Thanks
Ram
Edited by: Ram Prasad on Jan 5, 2008 6:16 PM

Hi Ram,
You are doing good but don't copy manually cut and paste. you have to copy with the copy command.
Got to -
> SE37 and type your Existed ZBAPI click copy ( CTRL + F5) button in formatting tool bar next to delete button it will ask new name and will ask all the structure and etc... you have put mark in check boxes and copy that in your own bapi . in this case you dont see any errors.
if you give me brief i can help you out more.
Thank you .
Regards
Ram

How to merge standard and Custom BADI into one BADI..

Hello all,
I have two BADI's.
1) standard BADI
2) Custom BADI
I need to merge these two into a single BADI. Is that Possible.
If yes how to move forward, because I am new to BADI.
Waiting for reply.
Subba

Solved...created a new implementation for this...

Problem with custom task for approval

Hi Experts,
I have created webdynpro for abap application and custom task for apporval of the clock correction. I have maintained the visualization parameter in SWFVISU. But when I clicks on the approval task in UWL, it opens R/3 screen and it shows "Work item 000090007959 cannot be read".
Could you please give me solution.
Thanks
Sameer

Hi,
We cleared the cache and tweaked the system
Now its working

How to create a custom task in SRM for the standard task

Hi Gurus,
How to create a custom task in SRM for the standard task eg: TS10407929
regards,
George.

from PFTC itself. Same.

Standard Web Service and Customized Web Services with or without PI?

Hi All,
I want to know how I can use Standard Web Service available in SAP and customized Web Services
without PI Interface?
And what is the best practice to expose services ,via PI Interface or directly?
Thanks in advance!!
Pushkar

This is purely based on your requirement. If you use PI middleware to expose web services, you get standard functionalities such as certificate authentication, logging, message reprocessing for the failed messages etc. If your requirement is so simple, then you might not need PI. In this case you can develop simple webdynpro for abap program to create webservice and expose the webservice in ECC webservice runtime. You can let anyone to consume within your network. other ways like exposing BAPI/RFC as webservice. I would recommend going with PI.

Standard iview and custom iview

Hi,
Have any one tried developing a custome MDM iview which displays the record details on click of a record in standard Result Set iview?
There is a section in portal content development guide called "Configuring Data Exchange (Eventing)" which deals with this scenario.
Please share your experience on the integration of Standard iview and custom iview.
I have already gone through the sdn article on "Integrating MDM Item Details iView into a WebDynpro Application".
Thanks and best regards,
Arun prabhu S

Custom Event Name - EPCFgetRecordByIds
Any name will do here, so this is fine
Event Type - EPCF ; Record Event
Correct again
Target (URL or Event Name) - getRecordByIds
Again,... Any name will do here (this is what you will use in the wdDoInit to subscribe to)
Namespace - urn:com.sap.pct.mdm.appl.masteriviews (?. not sure abt this)
Though it should not cause an issue I would use something else, this might interfere with the standard iViews events (though they will probably have different event names). You should be able to just come up with your own namespace here
Auto-Fire on Row Select - Yes
Correct
Parameter Format - Standard
Correct
Mapped Field - Record ID
Here you select all fields you like to know the values of in the action-method of your webdynpro. Most likely this is record id or some other unique identifier of the record.
Parameter name - ?
Just give any parameter name. You will use this name to find that specific parameter in the string of your action method.
I want the MDM record id of the selected record as an input.
This is in the string if you configured the iView as above. Just print it to the screen on the action method.
Can you please help me tell me how the record id gets passed from standard iview to custom iview?
That should already happen by the subscribing to the event you did in the wdDoInit. Welcome to the wonderful world of eventing
Jurjen

Standard form :'Customer invoice' and 'customer Invoice : Property Damage'

Hi
Can someone tell me what is the standard form for 'Customer invoice' and 'customer Invoice : Property Damage'.? Is there any config involved.
I'll reward points for any helpful answer.
-Nash

LB_BIL_INVOICE is the Standard SMARTFORM for Invoice Document
you need to do Output Type/Control configuration(TCode NACE)

Custom task (uc_task_custom)? how is the best way to implement intention

Hello all,
i would like to tell you our intention. We want to calculate Capital Charge. Thius means we want to read a couple of records from transactional cube (differing e.g. on item) then do a calculation, then write it back as one record (new item) into the transactional cube. The Custom method is not enough to ful fill the requirements because it can be used just for status monitor updating. Does anyone have a suggestion how to implemet this. Thanks in advance,
Murat

I did not use any BPS or IP planning functions; that might be an approach, but I've never worked with either application. The calculation, in my case, was done in ABAP.
I don't have access to a BCS system at the moment, but I believe there is documentation and an example of how to implment the UC_TASK_CUSTOM BAdI delivered with the system. Check the BAdI in SE18 and see if there is an example class listed. I seem to remember CL_IM_EX_UC_TASK_CUSTOM or something similar.
There is also the documentation in the BAdI which explains exactly which importing/exporting parameters exist. IT_SEL will include things like group currency, period, year, FYV, cons group, company, etc. ET_MESSAGE will determine the cons monitor status when you are finished. You can show additional results on the screen (like a regular BCS task would produce), but you need to write your own ALV. I don't believe it is possible for this list to be available with the "last log" functionality though (I could never find a way, at least).
uc_task_custom method is only to change status monitor
I would disagree. The exporting parameters, as mentioned above, determine the monitor status. But it's also an entry point for you to develop whatever you need to meet your requirements. Need to have a document approval process for manual documents? You can write a custom task for that. Need to post equity pickups back to the GL? You could write a custom task to call an RFC or BAPI in ECC and do that. Need to export results from from the BCS virtual cube to a flat file, basic cube, or an end user's PC? I'd write a custom task. Custom Document? Custom Task.
The issue becomes that greater development effort is required to create a custom task, than to customize a reclassification or an open hub. If the standard functionality does not meet your requirements though, you can either change the requirements or hire a developer to implement them.
- Chris

Need Help: Workflow Decision Task not visible in NWBC for customer Task

Hello All,
I am new to NWBC configuration , need ur expert knowledge for the below issue. I have checked the treat . Approve/Reject button for SRM Approval for RFx response ,but not able to get the exact steps for the configurations in NWBC.
Requirement.
     We are working on SLM/SRM module, where we have requirement to create a custom workflow with custom Task for which we have executed below actions.
Created the Custom Workflow.
Created the custom Task with custom ZCLASS and ZEVET.
Created   Event linkages in SWE2.
After doing this we are getting the workitem in the NWBC, currently we don’t have the Portal system in place, so we are using the NWBC for all our testing.
What is the issue?
     When we select the workitem in the NWBC (UML) inbox , the Decision Task ie “Approve” or “Reject” button are not visible , where as for SAP standard Task buttons are visible.
What help we need?
When we cross check the SCN/IBM portal, found that we need to do the XML file configurations. Can you any one kindly let us know the steps we need to follow to achieve our functionality.
Thanks a lot in advance.
Thanks and Regards
Channa

You need to share the details of what Inbox you are using, configuration steps depend on it. If you aren't using portal, you aren't using UWL and there is no UML inbox. You need to get your facts straight. Most likely you are using the Business Workflow Inbox (SWF_WORKPLACE) or the Lean Inbox (IBO_WDA_INBOX). Both are based on Web Dynpro ABAP and POWL but the configuration is different. Regardless, you posted this in the wrong space. Correct space is either SAP NetWeaver Business Client or Web Dynpro ABAP.

Standard and Customer Tasks

Similar Messages

Maybe you are looking for