Standard and Non-standard exports and queries issue

Hi,
We have created a few STANDARD books with standard exports in them. The standard exports use standard queries.
The ISSUE is that in the Verifications/Filters tab, where we have put in a lot of queries - ONLY the STANDARD queries show up. We would like to have all the queries show up. I am the adminsitrator and still only the standard ones show up.
I am worried that if I "Save As" the export as a non-standard export, it does not allow me to uncheck the standard tick column and save it but I have to manually change the name of the export. Can we change this in anyway?
Is there a system preference where I can allow all the queries to show up in the verifications/filter tab at least for the admnistrators if not for all? Thanks
- Ad

Thanks for your input but DRM does seem to be behaving what you said or may be I am still missing something here.
I created a standard query.
I have a standard export.
Now, in the verification/filter tab of my Standard export, I am able to see my standard queries.
But,
I am unable to see the Non-Standard Queries.
HOWEVER,
If I have a Non-Standard export --> I am able to ALL the queries. This makes it a lot more flexible in doing things.
My question is the WHY are my standard exports not able to reach the non-standard queries. What I wanted to do a twist in my export for analysis purposes for a particular use. If non-standard exports have access to Standard and Non-Standard queries --> it just makes more sense to always use a non-standard export and create non-standard queries.

Similar Messages

I have finally figured out how to export an iphoto album so that I can maintain the proper order of the photos after burning the file. How do I keep each individual photo title and description after exporting and burning?

I have finally figured out how to export an iphoto album so that I can maintain the proper order of the photos after burning the file. How do I keep each individual photo title and description after exporting and burning? Presently after exporting and burning each photo is identified by the file name rather than each individual title description.

File name and Title are not the same thing.
Filename is attached to the Jpeg file in the Finder.
Title is attached to the photo within the Jpeg file - as is the description. These are written to the Exif and IPTC metadata on export.
So: File -> Export. Kind: Jpeg or Tiff and Check the box at 'Title and Keywords'. This will write the Title, keywords and descriptions (though not explicitly stated) to the metadata. This can then be viewed in any app that understand this material.
You can choose, if you wish, to also use the Title as a Filename - that's an option at File Name
Regards
TD

Am editing with red files in premier pro and when I export and then upload to youtube it is not showing as an hd video. can anyone help?

am editing with red files in premier pro and when I export and then upload to youtube it is not showing as an hd video. can anyone help?

Then it's probably YouTube - have you checked here to see that you're watching the hi res version? It could be that YouTube is choosing an easier version to display based on your internet connection.
You can see on this screenshot that although the video has up to 1080 specs, my connection is making YouTube show me the 360p version by default.

AV output and non-standard frame sizes

I usually work in non-standard frame size for my FCP projects because my final output will be in a 2:35:1 ratio. I use a Blackmagic Ultrastudio Mini Monitor as an HDMI output to a client monitor. Up until a few months ago the AV output of FCPX would allow the Mini Monitor to accept a frame size of 1920x818 and letterbox the output to 16x9 on this consumer grade LCD. One day, this just stopped working... I've reached out to Blackmagic and they have no solution or reason why this happened, and are not willing to offer support since what I was achieving wasn't an "officially supported" feature. Now, the AV output will distort the image vertically to fill a 16x9 frame. At this point I am stuck having to use either a matte layer or a widescreen effect on individual clips to output correctly to my monitor which increases edit time having to re-render any edits underneath the matte and having to re-order the letterbox effect after apply color correction etc. It was also very easy to adjust the frame offset with this wide angle project size.
Is anyone editing in 2:35:1 (or other cinema standard) projects and getting successful conversion on output? What are you using?
Cheers,
Matt

Thanks Tom, you clarified it ....... or at least something clicked in my brain.
I was trying to set "Custom" when I created the new project.
I didn't know, or had forgotten, that in the "error" window I could select "Custom".
All is now well and FCP X 10.1.1 is pretty clever after all!
There is one weird thing I'd like to mention.
When I clicked on "Custom" the 960 x 600 frame dimensions appeared but the frame rate was listed as 23.98p as shown in the screenshot below.
So what's wrong with that?
Well the clip is 30p and I naturally thought I was going to end up with a project with an incorrect frame rate.
Now here's the funny thing ......... when I selected the project and viewed it in the Inspector it was the correct 30p
So why was I given that worrying piece of misinformation.

IPad and non-standard DNS

On our internal network, we use non-standard top level domains (.int) rather than the usual .com, .net, .info, etc.
I'm using an App called SharePlus Lite Office Mobile to try to access our corporate SharePoint sites. I've added our .int domain into the iPad's DNS Search domains, but whenever I try to access the SharePoint server, I get a 400 - HTTP/1.1 400 Bad Request Error. If I try to access a SharePoint site that is using a standard gtld (.com), I have no problem accessing it.
Layne Meier
Atlanta, GA

I have an iPod touch, my mom has an iPad 2, and my dad is getting a work iPad.
And they all run on my Windows 7.

Really unusual and non-standard situation with Apple ID...

Hi everyone!
My name is Roman and I'm form Kyiv (Ukraine).
I will really appreciate any ideas concerning possible solve of mentioned below situation:
My wife is using iPhone 5 and the day before yesterday she made an software update to ios 8.0.2.
Everything went fine... and after activation system asked for the appleid and password. The problem is my wife forgot the password and asked me to solve this issue. Later on i went to "iforgot" and asked to sent the 'reset" on her e-mail, but this e-mail is [email protected] (system sends the recovery link on the mailbox where i need to access). Paradox. Moving on I've tried to find out what was the alternative e-mail and checked all our possible mailboxes and did not find any mention of the appleid. Finally, I've decided to reset the password with the security questions. And another shot is on the first step (indicate birthday) none of our family birthdays are suitable At the very end we've called to the apple support center and tried to manage this mass with the operator. Unfortunately we did not indicate the credit card details while icloud account creation. Last chance is the security questions since as we found out there some unusual stuff with the alternative e-mail (as we been told). We had to answer two of security questions. (It is not a problem). But, when we call to nearest apple client service (in Moscow) (we wait for 20 - 25 minutes) and than operator kindly asks to provide answers and spell those. (And if you do at least one mistake or misunderstanding in spelling of any word you have to call back in eight hours and try again). As far as we saw, from Ukraine spelling might differ somehow via land-line talk.
I understand that the security is a high priority always and respect this.
Please let me know if there and chance to provide all the information somewhere (f.e. serial number, id scan, family photos, all known details, etc.) to solve this issue?
P.S. If there is no solution, than I'll probably have to buy the new iPhone to my wife

Did you contact Apple via iTunes Store Support: http://www.apple.com/support/itunes/contact.html
Other posters here have reported prompt responses with similar issues. And, no, your apps are attached to the account under which you purchased them, so creating a new account will not work.

ZCM Inventory and Non-Standard Ports

Greetings all:
I have a client who has ZCM installed on a Windows server. During the install they decided to not use port 80 and 443 (due to another app on the box) and instead use 90 and 1443. After we applied ZCM 10.1, 10.1.1 and 10.1.2 the server showed issues with imaging. Research showed the issue to be trying to use port 1443 instead of 443. When we tried to change any config file to reflect 1443 the file would be changed back to 443. They decided to use 443 for SSL communications but still needed to use port 90 for other communications.
Recently they realized that devices were not inventorying. They do not have the full agent installed on their workstations, only the inventory-only agent. It appears that any new workstations with a new install of the agent inventory, but updates do not occur. We enabled logging on a test machine. Please see the relevant part of the log below.
Changing the umia xml file to reflect port 80 on the workstation seems to correct the issue and we can upload new data.
What happened during our upgrade to change the ports we use to communicate with this server and what files can we edit to get back to the original ports we defined?
Any help would be greatly appreciated!
Donna
<EVENT AT="4/30/2009 17:08:11">
Found inventory file ./outgoingUIA/49c7e7d7a690214aaffe1e645677a252-last.xml to be posted
</EVENT>
<EVENT AT="4/30/2009 17:08:11">
*** PostInventoryResults: sending ./outgoingUIA/49c7e7d7a690214aaffe1e645677a252-last.xml to 10.1.1.1:90
</EVENT>
<EVENT AT="4/30/2009 17:08:11">
:80 not found or not at end: 10.1.1.1:90
</EVENT>
<EVENT AT="4/30/2009 17:08:11">
https://10.1.1.1:90/zenworks-fileupl...ogenerate=true
</EVENT>
<EVENT AT="4/30/2009 17:08:32">
Unknown SSL protocol error in connection to 10.1.1.1:90
</EVENT>
<EVENT AT="4/30/2009 17:08:32">
Unable to send inventory ./outgoingUIA\49c7e7d7a690214aaffe1e645677a252-last.xml to 10.1.1.1:90
</EVENT>
<EVENT AT="4/30/2009 17:08:32">
Scheduler: evaluation completed
</EVENT>
<EVENT AT="4/30/2009 17:08:32">
Next scheduler evaluation=720 (mins), connState=1
</EVENT>

dsf79,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Unicode and non-unicode string data types Issue with 2008 SSIS Package

Hi All,
I am converting a 2005 SSIS Package to 2008. I have a task which has SQL Server as the source and Oracle as the destination. I copy the data from a SQL server view with a field nvarchar(10) to a field of a oracle table varchar(10). The package executes fine
on my local when i use the data transformation task to convert to DT_STR. But when I deploy the dtsx file on the server and try to run from an SQL Job Agent it gives me the unicode and non-unicode string data types error for the field. I have checked the registry
settings and its the same in my local and the server. Tried both the data conversion task and Derived Column task but with no luck. Pls suggest me what changes are required in my package to run it from the SQL Agent Job.
Thanks.

What is Unicode and non Unicode data formats
Unicode :
A Unicode character takes more bytes to store the data in the database. As we all know, many global industries wants to increase their business worldwide and grow at the same time, they would want to widen their business by providing
services to the customers worldwide by supporting different languages like Chinese, Japanese, Korean and Arabic. Many websites these days are supporting international languages to do their business and to attract more and more customers and that makes life
easier for both the parties.
To store the customer data into the database the database must support a mechanism to store the international characters, storing these characters is not easy, and many database vendors have to revised their strategies and come
up with new mechanisms to support or to store these international characters in the database. Some of the big vendors like Oracle, Microsoft, IBM and other database vendors started providing the international character support so that the data can be stored
and retrieved accordingly to avoid any hiccups while doing business with the international customers.
The difference in storing character data between Unicode and non-Unicode depends on whether non-Unicode data is stored by using double-byte character sets. All non-East Asian languages and the Thai language store non-Unicode characters
in single bytes. Therefore, storing these languages as Unicode uses two times the space that is used specifying a non-Unicode code page. On the other hand, the non-Unicode code pages of many other Asian languages specify character storage in double-byte character
sets (DBCS). Therefore, for these languages, there is almost no difference in storage between non-Unicode and Unicode.
Encoding Formats:
Some of the common encoding formats for Unicode are UCS-2, UTF-8, UTF-16, UTF-32 have been made available by database vendors to their customers. For SQL Server 7.0 and higher versions Microsoft uses the encoding format UCS-2 to store the UTF-8 data. Under
this mechanism, all Unicode characters are stored by using 2 bytes.
Unicode data can be encoded in many different ways. UCS-2 and UTF-8 are two common ways to store bit patterns that represent Unicode characters. Microsoft Windows NT, SQL Server, Java, COM, and the SQL Server ODBC driver and OLEDB
provider all internally represent Unicode data as UCS-2.
The options for using SQL Server 7.0 or SQL Server 2000 as a backend server for an application that sends and receives Unicode data that is encoded as UTF-8 include:
For example, if your business is using a website supporting ASP pages, then this is what happens:
If your application uses Active Server Pages (ASP) and you are using Internet Information Server (IIS) 5.0 and Microsoft Windows 2000, you can add "<% Session.Codepage=65001 %>" to your server-side ASP script.
This instructs IIS to convert all dynamically generated strings (example: Response.Write) from UCS-2 to UTF-8 automatically before sending them to the client.
If you do not want to enable sessions, you can alternatively use the server-side directive "<%@ CodePage=65001 %>".
Any UTF-8 data sent from the client to the server via GET or POST is also converted to UCS-2 automatically. The Session.Codepage property is the recommended method to handle UTF-8 data within a web application. This Codepage
setting is not available on IIS 4.0 and Windows NT 4.0.
Sorting and other operations :
The effect of Unicode data on performance is complicated by a variety of factors that include the following:
1. The difference between Unicode sorting rules and non-Unicode sorting rules
2. The difference between sorting double-byte and single-byte characters
3. Code page conversion between client and server
Performing operations like >, <, ORDER BY are resource intensive and will be difficult to get correct results if the codepage conversion between client and server is not available.
Sorting lots of Unicode data can be slower than non-Unicode data, because the data is stored in double bytes. On the other hand, sorting Asian characters in Unicode is faster than sorting Asian DBCS data in a specific code page,
because DBCS data is actually a mixture of single-byte and double-byte widths, while Unicode characters are fixed-width.
Non-Unicode :
Non Unicode is exactly opposite to Unicode. Using non Unicode it is easy to store languages like ‘English’ but not other Asian languages that need more bits to store correctly otherwise truncation will occur.
Now, let’s see some of the advantages of not storing the data in Unicode format:
1. It takes less space to store the data in the database hence we will save lot of hard disk space.
2. Moving of database files from one server to other takes less time.
3. Backup and restore of the database makes huge impact and it is good for DBA’s that it takes less time
Non-Unicode vs. Unicode Data Types: Comparison Chart
The primary difference between unicode and non-Unicode data types is the ability of Unicode to easily handle the storage of foreign language characters which also requires more storage space.
Non-Unicode
Unicode
(char, varchar, text)
(nchar, nvarchar, ntext)
Stores data in fixed or variable length
Same as non-Unicode
char: data is padded with blanks to fill the field size. For example, if a char(10) field contains 5 characters the system will pad it with 5 blanks
nchar: same as char
varchar: stores actual value and does not pad with blanks
nvarchar: same as varchar
requires 1 byte of storage
requires 2 bytes of storage
char and varchar: can store up to 8000 characters
nchar and nvarchar: can store up to 4000 characters
Best suited for US English: "One problem with data types that use 1 byte to encode each character is that the data type can only represent 256 different characters. This forces multiple
encoding specifications (or code pages) for different alphabets such as European alphabets, which are relatively small. It is also impossible to handle systems such as the Japanese Kanji or Korean Hangul alphabets that have thousands of characters."<sup>1</sup>
Best suited for systems that need to support at least one foreign language: "The Unicode specification defines a single encoding scheme for most characters widely used in businesses around the world.
All computers consistently translate the bit patterns in Unicode data into characters using the single Unicode specification. This ensures that the same bit pattern is always converted to the same character on all computers. Data can be freely transferred
from one database or computer to another without concern that the receiving system will translate the bit patterns into characters incorrectly.
https://irfansworld.wordpress.com/2011/01/25/what-is-unicode-and-non-unicode-data-formats/
Thanks Shiven:) If Answer is Helpful, Please Vote

Static and non-static variables and methods

Hi all,
There's an excellent thread that outlines very clearly the differences between static and non-static:
http://forum.java.sun.com/thread.jsp?forum=54&thread=374018
But I have to admit, that it still hasn't helped me solve my problem. There's obviously something I haven't yet grasped and if anyone could make it clear to me I would be most grateful.
Bascially, I've got a servlet that instatiates a message system (ie starts it running), or, according to the action passed to it from the form, stops the message system, queries its status (ie finds out if its actually running or not) and, from time to time, writes the message system's progress to the browser.
My skeleton code then looks like this:
public class IMS extends HttpServlet
    public void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException
        doPost(request, response);
   public void doPost(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException
      //get the various parameters...
         if (user.equalsIgnoreCase(username) && pass.equalsIgnoreCase(password))
            if(action.equalsIgnoreCase("start"))
                try
                    IMSRequest imsRequest = new IMSRequest();
                    imsRequest.startIMS(response);
                catch(IOException ex)
                catch(ClassNotFoundException ex)
            else if(action.equalsIgnoreCase("stop"))
                try
                    StopIMS stopIMS = new StopIMS();
                    stopIMS.stop(response);
                catch(IOException ex)
             else if(action.equalsIgnoreCase("status"))
                try
                    ViewStatus status = new ViewStatus();
                    status.view(response);
                catch(IOException ex)
         else
            response.sendRedirect ("/IMS/wrongPassword.html");
public class IMSRequest
//a whole load of other variables
public PrintWriter    out;
    public int                 messageNumber;
    public int                 n;
    public boolean         status = false; //surely this is a static variable?
    public String            messageData = ""; // and perhaps this too?
    public IMSRequest()
    public void startIMS(HttpServletResponse response) throws IOException, ClassNotFoundException
        try
            response.setContentType("text/html");
            out = response.getWriter();
            for(n = 1 ; ; n++ )
                getMessageInstance();
                File file = new File("/Users/damian/Desktop/Test/stop_IMS");
                if (n == 1 && file.exists())
                    file.delete();
                else if (file.exists())
                    throw new ServletException();
                try
                    databaseConnect();
               catch (ClassNotFoundException e)
//here I start to get compile problems, saying I can't access non-static methods from inside a static method
               out.println(FrontPage.displayHeader());
                out.println("</BODY>\n</HTML>");
                out.close();
                Thread.sleep(1000);
        catch (Exception e)
    }OK, so, specifially, my problem is this:
Do I assume that when I instantiate the object imsRequest thus;
IMSRequest imsRequest = new IMSRequest();
imsRequest.startIMS(response); I am no longer in a static method? That's what I thought. But the problem is that, in the class, IMSRequest I start to get compile problems saying that I can't access non-static variables from a static method, and so on and so on.
I know I can cheat by changing these to static variables, but there are some specific variables that just shouldn't be static. It seems that something has escaped me. Can anyone point out what it is?
Many thanks for your time and I will gladly post more code/explain my problem in more detail, if it helps you to explain it to me.
Damian

Can I just ask you one more question though?Okay, but I warn you: it's 1:00 a.m., I've been doing almost nothing but Java for about 18 hours, and I don't do servlets, so don't take any of this as gospel.
If, however, from another class (FrontPage for
example), I call ((new.IMSRequest().writeHTML) or
something like that, then I'm creating a new instance
of IMSRequest (right?)That's what new does, yes.
and therefore I am never going
to see the information I need from my original
IMSRequest instance. Am I right on this?I don't know. That's up to you. What do you do with the existing IMS request when you create the new FrontPage? Is there another reference to it somewhere? I don't know enough about your design or the goal of your software to really answer.
On the other hand, IMSRequest is designed to run
continuously (prehaps for hours), so I don't really
want to just print out a continuous stream of stuff to
the browser. How can I though, every so often, call
the status of this instance of this servlet?One possibility is to pass the existing IMSRequest to the FrontPage and have it use that one, rather than creating its own. Or is that not what you're asking? Again, I don't have enough details (or maybe just not enough functioning brain cells) to see how it all fits together.
One thing that puzzles me here: It seems to me that FP uses IMSReq, but IMSReq also uses FP. Is that the case? Those two way dependencies can make things ugly in a hurry, and are often a sign of bad design. It may be perfectly valid for what you're doing, but you may want to look at it closely and see if there's a better way.

When i import a word.doc and open on my iPad in Pages, and then later export and reopen as a word.doc on my PC, hyphenation is lost

when i import a word.doc to my iPad in Pages and then, later, export back to my PC as a word.doc, why does hyphenation disappear?

Perhaps it would work better if you use one of the apps specifically designed to interface with MS Word, instead of Pages which has to convert everything in and out.

Mixing and exporting for more than 8 channels and non-standard multichannel setups

I am trying to do something kind of unconventional, although I have seen people on the forums trying to do similar things. Unfortunately, it's unclear if they succeeded or not, and if they did, how.
I'm trying to figure out how to mix sound for an environment that has many (somewhere between 8 and 16) independent speakers, all connected to an audio interface. I know that WAV, AAC, and other audio file formats can carry that many channels and I can map them to the individual speakers. My question is how to edit/mix. Specifically,
Is this possible in Audition? It seems like it might be in CC, but not previous? (I have CS6.)
How do you set up the project file. When I create a new multitrack project, I can choose mono, stereo, or 5.1. The 5.1 option allows me to assign sounds to the five speakers in a standard 5.1 setup and the LFE. Is it possible mix for an environment with more than that? Or with a different configuration of speakers? In Audio MIDI Setup (for Windows people, that's where in OSX you set the more advanced audio preferences) I can configure up to 7.1 as well as geometric arrangements like quadrophonic, hexagonal, and octagonal. Is it possible in Audition to mix for anything like these?
There have been some threads where people talk about using 16 discrete outputs in Audition. How is this possible? Is each track able to be routed to a different output? If so, is it possible to write a file that has all of these tracks assigned to their discrete output channels?
Is it possible to nest audio sessions like you can nest Premiere sequences? For example, can I create a multitrack project with mono output and have that session be embedded into another multitrack session or do I have to finish editing the first one and write a file from it to use it in another project? Can buses be used to do this? What I'm wondering is if what I describe in #3 above IS possible, then how to have more than just a single pre-made audio file going to each of the outputs, to allow me to mix each channel with various sounds.
Sorry that's a few questions, but they all revolve around how to work with multi-channel sound that isn't stereo or 5.1.
Thanks!

SpdCncpt wrote:
I'm trying to figure out how to mix sound for an environment that has many (somewhere between 8 and 16) independent speakers, all connected to an audio interface. I know that WAV, AAC, and other audio file formats can carry that many channels and I can map them to the individual speakers. My question is how to edit/mix. Specifically,
Is this possible in Audition? It seems like it might be in CC, but not previous? (I have CS6.)
As you have probably gathered, this is effectively a work in progress...
How do you set up the project file. When I create a new multitrack project, I can choose mono, stereo, or 5.1. The 5.1 option allows me to assign sounds to the five speakers in a standard 5.1 setup and the LFE. Is it possible mix for an environment with more than that? Or with a different configuration of speakers? In Audio MIDI Setup (for Windows people, that's where in OSX you set the more advanced audio preferences) I can configure up to 7.1 as well as geometric arrangements like quadrophonic, hexagonal, and octagonal. Is it possible in Audition to mix for anything like these?
At present, this is restricted to what you can see, but there's sort-of a workaround - albeit not an ideal one...
There have been some threads where people talk about using 16 discrete outputs in Audition. How is this possible? Is each track able to be routed to a different output? If so, is it possible to write a file that has all of these tracks assigned to their discrete output channels?
If you have a multichannel sound device, and all the outputs are visible to Audition, then yes, each track can be assigned directly to a different output. And if you set one up, you can do this with buses as well...
Is it possible to nest audio sessions like you can nest Premiere sequences? For example, can I create a multitrack project with mono output and have that session be embedded into another multitrack session or do I have to finish editing the first one and write a file from it to use it in another project? Can buses be used to do this? What I'm wondering is if what I describe in #3 above IS possible, then how to have more than just a single pre-made audio file going to each of the outputs, to allow me to mix each channel with various sounds.
It's not possible to nest sessions at present in any version, and this has been asked about before. There are some significant issues with this, mainly to do with things like sample rates, output formats, etc. Doesn't mean that it won't happen, but don't hold your breath... As I said, there's a workaround, and yes, it's buses. Since you can effectively submix to a bus, and the bus output can go directly to hardware, then you can do what you want. The compromise is that in order to save the overall result, you'll end up with all of your source files, and a session file. And you'll have to play the whole thing back in Audition, rather than export it to a single file and be able to play it on a multichannel player. But yes, it should work.

Java 6 and non standard keyboards

I'm using a Java 6 app on my MacBook Pro. I have a microsoft external keyboard and I am using the "British - Microsoft" keyboard layout.
With this setup no Java 6 app will accept any keyboard entry. Typing has no effect.
If I change to "British" keyboard layout then keyboard entry works, but obvisouly the keyboard layout doesn't match my physical keyboard layout.
Any ideas how I can set things up so I can enter text into Java 6 apps using a keyboard layout that matches my keyboard?
Thanks
John

PS It might be worth trying other keyboard layouts designed to match non-Apple British keyboards:
http://liyang.hu/osx-british.xhtml

Exclude and non standard folder names - doesn't add

Hi
I've discovered a bug with folders using [ ] brackets in their name - they won't add correctly in time machine exclude dialogue.
I've tested other variances (blah), test works fine but [test] doesn't.
Just so people know that this issue exists. I've filed a bug report to Apple.

Now it has gotten worse. We were importing some of the missing folders seperately, until after one import, the entire music folder on my network drive went totally missing! Yup, it's gone and my most current backup is over 3 months old (my fault). Now I *really* hate iTunes.

Cloned bootdisk and non-standard home directory location fails login

I'm running 10.6.3 and have my home directory on a separate partition (but the same physical disk) from my boot partition. I've just used carbon copy cloner to clone the boot partition to a third partition on a separate physical disk for backup. when i boot from the clone, the user account auto logs in but has lost my settings (goes through the welcome video etc.). if i then go into the advanced options in Accounts prefpane and choose the (old) home directory again (whose path is already displayed in the prefs) and reboot, the login fails.
My question is: Is it possible to have the home directory on a separate partition and still have a working clone of the boot partition?
Thanks in advance for any guidance you can give...

ok - answered this one myself. i used Super Duper instead, and made a sandbox backup of my bootdisk, which uses alias links to files and apps. this meant i could have a test bed bootable partition which wouldn't cause trouble for my main install. not perfect but workable...

MASSIVE freeze-up and will not export to soundtrack issues

Seems I have started having a couple of new issues with FCP
1. While playing back a work in progress the computer will freeze up and requires a hard boot. This has just started and seems to come at the absolute worse moments....usually when I forget to SAVE
2. I can no longer export my tracks to soundtrack pro. I get an error message that says it has failed.
reinstall?
Any clues?

Well, the first and easiest thing to try is trashing your prefs. FCP Rescue can help with that:
http://pistolerapost2.com/fcprescue/
More help requires more information. Please tell us more.
Patrick

Standard and Non-standard exports and queries issue

Similar Messages

Maybe you are looking for