Standard Asset report - INVNR (Inventory field) requirred
Hi Guys
Is it possible to get inventory field (INVNR) in standard asset reports. I dont want to use dynamic selection in any standard report.
That means in a standard asset report i need one more column for inventory name for every assets
Warm Regards
Bala
Bala,
Yes, it is very much possible. Create a new sort version in OAVI and select the filed INVNR from the talbe ANLAV.Using this version while you execute the report and call in this field from the change layout.
Thanks
Jagdish
Similar Messages
-
About Asset report - table and fields
Hi ,
I am developing an Asset Report, I need table and field names for following -
a) GL A/C P&L
b) ASSET DEPRECIATION SCHEDULED
c) FORCASTED DEPRECIATION
d) PLANNED EXPENSES VERSES ACTUAL EXPENSES
e) GAP DEPRECIATION CATEGORY
e) When user enters the asset into SAP, the depreciation expense will automatically book to the sub-ledger. However in order to get the amount on the general ledger, which would be closed for prior periods, user must book a manual entry. So , I need this manual entry field.
Please guide me.
Regards,
Narayanproblem solved
-
Accounts Receivable Reports:Table and field required
Hi experts,
My user requires said reports in the following formats:
Posting date Invoice no. Customer code Invoice amount Payment received outstandig amount
Now i want to customized this reports.I have got table and fields for "posting date,invoice no,customer code ,invoice amount".
But i am unable to get table and field for "payment received and outstanding amount".
Please advise.
Regards,
SamaarHi,
You can get the values in the below fields of BSEG / BSID / BSAD tables.
REBZG, REBZJ, REBZZ, DMBTR.
But prerequisite for this is that, your incoming payment document must have been posted with reference to an existing outgoing invoice. Means posting made without any reference (on account payments) cannot be identified as a payment for a particular invoice item.
The balance amount will be a derived value field. ( inv amount - payment amount = Balance receivable)
Please co ordinate with yout ABAPer in order to fullfil your requirement.
Regards,
Srinu -
Customer reports-Table and field required
Hi experts,
We have customized on customer reports.We raise billing in USD4,in INR and in other currency.At present,they can get reports in INR,USD4 and other currency separately.Now my user requires,the whole reports in USD4,that means all other currencies tp be converted in USD4.Please advise in which table and field for the said matter
Regards,
SamaarYou can use TCURR table. Program should get USD4 amount and then convert amount to different currencies using either historical excahnge rate or current exchange rate in TCURR table.
-
Standard Asset Report considering Down Payment Differently
Hi
I am executing a report S_ALR_87011964 it gives a out put including a asset which has been acquired in current month and for which 50% down payment has been paid. Another report based on FS10N for that asset executed output excludes that asset for which 50% down payment has been done. Why output of both the report is different and exactly to the amount of down payment I am confused with the logic of both report is it any other way to consider asset for which some down payment has been done.
ThanksHi,
The FI report FS10N only shows balances, no down payments.
However, the asset balance sheet report S_ALR_87011964 in asset accounting does show these type of payments on the asset. The logic of these reports are not the same and therefore should not be compared.
I hope this clarifies.
Kind regards,
Brigitte -
Asset report with master data fields
It seems like that all standard asset reports can not display fields from the master record of the asset like room, user fields, etc. But those fields are there in the selection screen of standard reports. Is there standard report that can show me the asset values and fields from the asset master record?
Hi,
A comment from my side, for fixed asset related data like the fields you mentioned are available in asset history sheet report and all available fields are easily exported into Excel sheet if only the 'Use ALV grid' indicator under the 'Display options' is activated. Alternatively building a separate report using the query tool as mentioned.
However from end user perspective, the former may be readily accessible and with minimum maintenance when compared to the later as it requires the knowledge of database table relationship and query creation.
Thanks for the attention.
Kind regards,
John Chin -
Difference between standard SAP asset report and BW report
Hi
We are finding differences between the standard Asset report and the BW report which is extracted via standard SAP extractor. Could anyone guess what would be the reason for this?? I ran the report - AW01N
Please revert at once as this is very urgent.
Regards,
prasadHi Prasad,
A number of reasons could be responsible for this. Check the following:
1. If some posting were done in R/3 just before running your BW report, you may have to re-extract the data into BW as this would no longer be current. The thumb rule is to always allow at least <b>45</b> minutes to <b>1</b> hour between when the last transaction in R/3 was posted before re-extraction. This is to allow SAP Logical Unit of Work(LUW) to have been committed to the R/3 database.
2. There may have been some restrictions on the selection variables in the BW query. Check the Query Designer, just to be sure there are no restrictions.
I hope the above help.
Do not forget to award the points please.
Regards,
Jacob -
Asset Report by Location wise with address & other details
Hi,
Can any one guide me any reports are available for Asset Report by location wise, address and
other details.
Thanks in advance.
Regards,
GBHi Govind,
I have solution for your requirement.
Go to Tcode OAVI
Create new entries.
Difine a name for the sort version and enter description for the same.
Choose fields for display in standard SAP asset reports.
For your case enter table name ANLAV field names MENGE, STORT, and KOSTL. etc
Here you can choose various other fields also.
Then use this sort version while runnnig the SAP standard asset reports.
By using this sort version you can able to to see the quantity, location and cost center fields available during any any asset balances report. So take a printout of the asset balances report S_ALR_87011964 - Asset Balances by Asset Class along with the above fields and go for physical verification
Note: This development you can directly do it in your production system
This will defenetely fix your requirement.
Add Point*s, if problem resolved.
Thanks,
Srinu -
Asset Report by Vendor/Manufacturer #
Hi,
Is there a standard SAP asset report with the field of vendor and manufacturer #?
Thanks,
TeoHi
you can got the vendor and manufacturer name in T code
S_ALR_87011964
For that you have to create a sort variant by using T code OAVI
There you have to put the vendor and manufacturer table name
Then when you excute the above mention report in the layout field you can find vendor and manufacturer option
Note- To find the Vendor and manufacturer name in the report you have to maintained that in Asset master
Thanks
Ansuman -
Asset Report - for useful life of an asset
Dear Friends,
Is there any standard report which gives the following information --
1. Asset Number,
2. Asset Name
3. Account Determination,
4. Profit Center
5. Useful Life,
6. Depreciation in the current Year
7. Accumulated Depreciation
8. Acquisition Date
I tried in Asset Balances Reports. Most of the fields are coming except Useful Life.
Can any one please suggest.
Regards
KVKRHi
There is no report with usefullife , either you can go with query or you can extract Asset standard report where you will find most of the details you mentioned and for usefullife please use table ANLB and extract data from this table for useful life. You may copy your asset nos extracted by the above standard Asset report and paste that in the asset field of table ANLB.
Now you can insert the useful life in your main report.
cheers
Mukta -
Hi SAP Gurus,
I have a problem with Standard Asset reports S_ALR_87015066, S_ALR_87015065 in saving the layout. I need to save a layout and executed at all times to the user.
Please let me know is there any config settings to do this.
Thanks in Advance...
Best Regards,
Chandra.Hi
I got the solution and found this configuration in SPRO.
SPRO>IMG>Project systems>Information systems> technical report projects --> define profiles in displayed fields.
Add the desired fields from the pop up and transport it.
In IMG, WBS elements overview, in the pop up some of the fields are not displayed such as created by,capital code and RISK.
But it is displayed in the PS-wbs element overview (s_alr_87015066) report pop up( try to add after executing report).
Does anyone faced similar situation or any one have thoughts on this.
Thanks in Advance..
Best Regards,
Chandra. -
Any Std SAP Report on Inventory Movement Bulk MAterials & Back Flushed item
Hello
Is there any Standard SAP Report on Inventory Movements for Bulk Materials and Back flushed items ?hi
try
MC.9 - INVCO: Material Analysis Selection, Stock
MC.B - INVCO: Material Analysis Selection, Turnover
MC50 - INVCO: Analysis of Dead Stock
MC42 - INVCO: Range of Coverage by Usage Value
MC44 - INVCO:Analysis of Inventory Turnover
try searching in SAP1 and SAP2
regards
kunal -
Standard T-code of Fix Asset report which shows Quanity and Value
Hi friends,
Is it any T-code in SAP which shows Fix Asset with quality and value.
regards
Hemant MauryaHi,
All standard SAP asset reports show values for Eg.S_ALR_87011990. To display quantity you may create a sort variant with quantity as one of the fields through S_ALR_87009120. You can then run the above report i.e. S_ALR_87011990 with this sort variant to display quantities also along with values.
regards,
Swati -
Configure SAP Standard Asset Master fields
Hi Experts,
Please guide me how to achieve the below configuration.
Need to Configure 3 existing SAP Standard Asset Master fields so that they are "visible" for all asset classes and all company codes..
Inventory Group - character length 9, alphanumeric ,
Inventory Cycle - character length 10, alphanumeric ,
Responsible Group - character length 8, alphanumeric .
Regards,
John.Hello John,
I will give you some hints:
Please check the field status in the screen layout rule :
1) in transaction OAYZ, check for the concerned asset class and
depreciation area, what is the screen layout rule defined.
2) in transaction AO21, check in the screen layout rule if field group
, if avaiable, should not be suppressed
IMG -> Financial Accounting -> Asset Accounting -> Master Data ->
Screen Layout -> Define Screen Layout for Asset Depreciation Areas
(transaction AO21)
Please also have a look into SAP note 134044. As per you can see in this
note since 46A fields like: Business area and evaluation groups are
added into the creation of multiple assets. But the serial number
is not. The note also says that no other field is planned to be
available.
hope this helps,
regards
Ray -
Requirement Standard SAP Report on Total Purchase Order Value
Dear Friends,
Could u please suggest is there any standard SAP report. Requirement has given belwo.
I required if we have account assignment Category A as one of inputs, we will get the reqd output " Total Purcchase order value."
Note 1) Total Purchase Order Value means - Basic price + taxes + Charges (Freight + Other charges - Discounts etc)
Note 2) My requirement standard SAP report only.
Thanks and regrds,
Vijay Kumar TVNHi,
T code : ME80FN
Select :Edit->Dynamic selections>Purchasing document item> Acct. assignment cat.>select A(f4)->execute
select Material no., PO Number in program selections
Hope it shall resolve your query....
regards
rahul
Maybe you are looking for
-
Can't open 'Documents' in Finder
I cannot open the 'documents' files in finder for last couple of days . Every time I am clicking on "documents" in the 'finder' sidebar, finder crashes and stops working and I need to relaunch it. Therefore I have to use 'all my files' tab which is t
-
Problem in Launching Website URL from IC Webclient Screen
Dear all, I am trying to launch our Business Website URL from IC Webclient screen. I have created URL ID and Transaction Launcher ID and other required assignments. But when I try from IC Webclient, system showing 'Transaction about to Launch' messag
-
Javascript alert wiping page clean - HELP
Hi - I am using the javascript alert function in order to tell a user that information entered on a form is incorrect - however, the alert makes the page go away when all I want is to return to that page so the user can correct just that piece of inf
-
Hi Guys, Is there a transaction code for Report tree in PS. Like we have for AP - F.98, assets ART0 Thanks, Satya
-
Adobe Content Viewer Takes up Entire Screen
Hi Everyone, Whenever i preview a folio from indesign the content viewer takes up the entire screen and i am only able to see half of the publication. I tried zooming fit to screen but it didn't do anything. It's the window that won't resize to a sma