Standard background job is running after deleting a user also

Hi Gurus,
in my production system environment i observed below thing.
1)Default standard background jobs were scheduled by earlier basis admin after some days he left and his id also deleted but still some jobs are running with his id and finishing also, how is it possible without having his ID in system?
2) what is the standard procedure to schedule default standard bg jobs in SAP? either from sap* or DDIC or basis admin?
one more question regarding Audit logs:
1)can we activate audit log for selective ids and selective period?
2)if we activate audit log is there any performance issues will come?
Thanks in advance
Venkat

Hello Venkat,
1)Default standard background jobs were scheduled by earlier basis admin after some days he left and his id also deleted but still some jobs are running with his id and finishing also, how is it possible without having his ID in system?
- Please cross check whether multiple jobs are scheduled with that user in different time period. If that user is defined in step then only that job fails otherwise it runs without any issues.
2) what is the standard procedure to schedule default standard bg jobs in SAP? either from sap* or DDIC or basis admin?
- Please go through the note suggested by Juan. I recommend to schedule with DDIC or Basis Admin.
Thanks,
Siva Kumar

Similar Messages

  • Background job is running for long tome in source system (ECC)

    Hi All,
    Background job is running for long tome in source system (ECC) while extracting data to PSA.
    I checked in ECC system SM66,SM50 the job is still running
    in SM37 the job is Active
    There are only maximum 7000 records the extractor is 2LIS_02_ITM but it is taking 11 to 13 hours to load to PSA daily
    I had checked enhancements every thing is correct.
    Please help me on this how can I solve this issue.
    Regards
    Supraja K

    Hi sudhi,
    The difference between Call customer enhancement...  and  Result of customer enhancement:... is very less we can say this as a second.
    The difference is between LUWs confirmed and 1 LUWs -
       and Call customer enhancement -
    Please find the job log details below, and give me the solution to ressolve this
    01:06:43 ***01:06:43 * ztta/roll_extension........... 2000000000                              *                 R8           050
                     R8           048
    01:06:43 1 LUWs confirmed and 1 LUWs to be deleted with function module RSC2_QOUT_CONFIRM_DATA     RSQU          036
    06:56:31 Call customer enhancement BW_BTE_CALL_BW204010_E (BTE) with 5.208 records                  R3           407
    06:56:31 Result of customer enhancement: 5.208 records                                              R3           408
    06:56:31 Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 5.208 records                      R3           407
    06:56:31 Result of customer enhancement: 5.208 records                                              R3           408
    06:56:31 PSA=1 USING SMQS SCHEDULER / IF [tRFC=ON] STARTING qRFC ELSE STARTING SAPI                 R3           299
    06:56:31 Synchronous send of data package 1 (0 parallel tasks)                                      R3           410
    06:56:32 tRFC: Data Package = 0, TID = , Duration = 00:00:00, ARFCSTATE =                           R3           038
    06:56:32 tRFC: Start = 00.00.0000 00:00:00, End = 00.00.0000 00:00:00                               R3           039
    06:56:32 Synchronized transmission of info IDoc 3 (0 parallel tasks)                                R3           414
    06:56:32 IDOC: Info IDoc 3, IDoc No. 1549822, Duration 00:00:00                                     R3           088
    06:56:32 IDoc: Start = 04.10.2011 06:56:32, End = 04.10.2011 06:56:32                               R3           089
    06:56:32 Altogether, 0 records were filtered out through selection conditions                      RSQU          037
    06:56:32 Synchronized transmission of info IDoc 4 (0 parallel tasks)                                R3           414
    06:56:32 IDOC: Info IDoc 4, IDoc No. 1549823, Duration 00:00:00                                     R3           088
    06:56:32 IDoc: Start = 04.10.2011 06:56:32, End = 04.10.2011 06:56:32                               R3           089
    06:56:32 Job finished                                                                               00           517
    Regards
    Supraja

  • Background Job Still Running - Data Can Be Displayed Only Msg Populated in Maintain Versions (OKEQ) Screen

    Hi,
    I try to create 2013 FY in "Setting for Each FY" in OKEQ - Maintain Versions unfortunately I have created Null FY, try to delete Null FY on the time it will ask Job schedule, I have cancelled the job & reopen Maintain Versions (OKEQ) screen on the time system populated the msg "Background Job still running - Data can be displayed only"
    In Settings for Each FY screen there is no New Entries button, all FY are blocked status, changes was not allowed.
    How can I resolve it.
    Waiting for your valuable suggestions.
    Regards,
    Nageswar.

    Dear Rajneesh Saxena
    Thanks for your prompt reply.
    Yes you are correct, on the time of deletion it will ask Background Job Process, for immediate deletion must & should select "NO".
    While "Settings for Each FY" screen populates message "Background Job Still Running - Data Can Be Displayed Only" open  screen in display mode enter the command "=KILL" in command bar press enter, then you will allow to changes get New Entries button also.
    Problem is solved
    Regards,
    Nageswar.

  • Standard Background Job

    Hi Experts
    in Production system Standard background job finished per every second once ...even daily jobs also...
    I want to delete all Standard job and reschedule ..can't delete from sm36 or sm37..
    where can i delete and rreschulde?
    what are the important jobs???

    Hello my friend
    Report RSBTCDEL or RSBTCDEL2, it deletes all batch job records in tables BTC*. And you might also need:
    Report RSPO1043, deletes spool requests.
    Report RSBDCREO, deletes batch input data.
    Report RSSNAPDL, deletes short dumps.
    Regards,
    Effan

  • Files missing from desktop after deleting a user profile that was created on there.

    I downloaded and installed firefox and it asked me to create a user profile, but it could not save in the default location. I chose to create the profile on the desktop as a test and that worked. However, after deleting that user profile, all of the items on my desktop were removed and cannot be located. The files are not in my trashbin and when I do a search, it says the file cannot be located. I have Windows 7.

    You shouldn't create a profile and choose an existing folder.<br />
    You should always specify an empty folder and if you didn't do that then you should never remove the files when you remove such a profile because all files in it will be removed and not just the files created by Firefox.
    See:
    *http://kb.mozillazine.org/Files_created_on_startup

  • Background Job not running

    Hi All,
    A background job has been scheduled to run every minute.It was working fine but a few days back it did not get scheduled for 2 hours . Any suggestions as to why this might have happened.
    TIA.
    Vartika

    Hi Manik,
    The job started working fine after 2 hours. It was only for 2 hrs that it did not work. How to check if the userid was locked or not during that period.
    Thanks
    Vartika

  • How to schedule batch jobs to run after another periodically?

    Hi good people,
    I want to schedule batch jobs to run periodically one after another.
    Here is the problem:
    I have scheduled JOB1 to run once a week and I scheduled JOB2 to run after that job (JOB1). The problem is that JOB2 runs only after the first time that JOB1 runs. The second time the JOB1 runs the JOB2 is not started. I presume that the reason for that is that JOB2 is tied to the job number for the JOB1, and since a new job (with the new number) is created every week, the JOB2 is only tied to the first instance of JOB1.
    So does anyone have an idea how to get JOB2 to automatically run every week after JOB1? One idea is to use events, but that I'm hoping that there is a bit cleaner solution..
    Best Regards,
    Armin

    Hi
    Try scheduling both JOB1 & JOB2 in a single job in steps.
    First schedule JOB1 & then give JOB2 in steps.
    Kindly check the following link to do job scheduling in steps:
    http://help.sap.com/saphelp_47x200/helpdata/en/c4/3a7ed1505211d189550000e829fbbd/frameset.htm
    In the above help documentation, look for the topic <b>"job steps"</b> in
    "Background Processing: Concepts and Features"
    hope it helps!
    best regards,
    Thangesh

  • How to select server in which background job should run

    Hi,
    I want to run my program as background job. I want the user to select the server, in which background job should be run, in the selection screen of my program. When it is sheduled in background the job should run in the selected server.
    How to do this?
    Regards,
    Sriram

    Hi,
    please write the code like as below.
    DATA : D_GROUP like TBTCJOB-JOBGROUP.
    use the function moulde JOB_OPEN.
      D_JOBNAME = SY-REPID.
      D_GROUP- BTCSYSREAX =  " pass the target server name Here
         CALL FUNCTION 'JOB_OPEN'
            EXPORTING
                 JOBNAME          = D_JOBNAME
                 JOBGROUP       =  D_GROUP
            IMPORTING
                 JOBCOUNT         = D_JOBNO
            EXCEPTIONS
                 CANT_CREATE_JOB  = 1
                 INVALID_JOB_DATA = 2
                 JOBNAME_MISSING  = 3
                 OTHERS           = 4.
    submit   <Program name>
                  USER SY-UNAME VIA JOB D_JOBNAME NUMBER D_JOBNO
                  USING SELECTION-SET '  var1 '   " Give varient name
                  AND RETURN.
    CALL FUNCTION 'JOB_CLOSE'
               EXPORTING
                    JOBCOUNT             = D_JOBNO
                    JOBNAME              = D_JOBNAME
                    STRTIMMED            = 'X'
               IMPORTING
                   JOB_WAS_RELEASED     = D_REL
               EXCEPTIONS
                   CANT_START_IMMEDIATE = 1
                   INVALID_STARTDATE    = 2
                   JOBNAME_MISSING      = 3
                   JOB_CLOSE_FAILED     = 4
                   JOB_NOSTEPS          = 5
                   JOB_NOTEX            = 6
                   LOCK_FAILED          = 7
                   OTHERS               = 8.
    Hope this will helps you
    Regards
    Kiran

  • Background Job Not Reconnected After Offline Backup.

    Hi all,
    Background jobs which are scheduled before Databse Offline Backup are always cancelled. Reconnect WP does not happen even if following parameters are set.
    We had set profile parameters in all Application Server like
       rsdb/reco_trials = 15
       rsdb/reco_sleep_time = 60
       rsdb/reco_add_error_codes = +3113 +3114 +1012 +1014 +1033 +1034 +1089 +1089 +1090 +1092
    R3 Production server (640 Kernel, Patch 175 , SAP_BASIS 620 , SAP_APPL 470)
       Database : Oracle 9.2.0.6
      SYSLOG Msg : SM21
    <b>     Communication error, CPIC return code 020, SAP return code 497  
           > CPI-C function: CMINIT(SAP)                                   
           Operating system call gethostbyname failed (error no. 0 )       
           Operating system call gethostbyname failed (error no. 0 )       
           Communication error, CPIC return code 020, SAP return code 497  
           > CPI-C function: CMINIT(SAP)                                   
           Communication error, CPIC return code 020, SAP return code 497  
           > CPI-C function: CMINIT(SAP)                                   
           Communication error, CPIC return code 020, SAP return code 497  
           > CPI-C function: CMINIT(SAP)                                   </b>
    Thanks & Regards.
    Naba

    Looks like some Gateway error....though not sure...
    Check Note 63347 - List: CPIC error codes and then u can try to troubleshoot further...

  • Background job not run properly

    Hi,
    When an infopackage is triggred through process chain in BI a background job will be exeuted at R/3 to fetch data from R/3.
    But the bakground job did not execute properly hat is it did not fetch any data but ot finished.
    But when the infopackage is executed manually the background job fetches the data from R/3.
    Why the job is not fetching data when triggered through process chain.
    Please help me to sole this issue.
    Regards,
    Indhu

    Hi Induja,
    In your case, you will have to debug the background job that is activated through BI. Check if proper data is coming from BI.
    You can only debug a background job if it is created under your user id. Thus, to debug the job you first have to own it and then debug by selecting it and either typing 'JDBG' in the command field or through menus available on the top.
    Job overview transaction code - SM37.
    Hopefully the issue is in Development/Test/Quality system and not in Production.
    Hope that helps!.
    Regards,
    Saba

  • After deleting Calendar users, their subscriptions still remain, and the server crashes when accessing deleted calendars

    After deleting users from iPlanet Calendar Server(iCS), the users'
    subscriptions still remain. Then, if a user tries to unsubscribe
    from a deleted calendar, the server sometimes crashes, even though sufficient
    disk space and memory are available. When checking the HTTP log, the
    log shows that certain calendars don't exist.
    The solution to this problem is to back up the ics50gse.db
    file to another file with a different
    name, or remove the file from the db
    directory.
    <P>
    If you are upgrading your iCS, make sure the GSE database queue is empty
    before you perform the upgrade. To check the GSE database queue,
    you can use either of the following commands while the server is either
    running or stopped:
    <P>
    csschedule list
    <I>OR</I>
    csdb -v list
    <P>
    After issuing the command, if nothing is displayed, the GSE queue is empty, and
    you can proceed to step 3 below. However, if the queue does contain
    items, use the following steps to flush it:
    <P>
    <OL>
    <LI>Start the server if the server is in a <I>stopped</I> state.
    <P>
    <LI>Stop only the cshttpd
    daemon so that no new requests can
    come in.
    <P>
    Note: It should take only a few minutes for the GSE to handle any requests.
    Typically, the GSE queue will be empty.
    <P>
    <LI>Shut down iCS.
    <P>
    <LI>Rename the ics50gse.db
    file.
    <P>
    <LI>Restart the server.
    </OL>
    <P>
    If you have already upgraded the server and are experiencing the above
    mentioned problems, use the following steps:
    <P>
    <OL>
    <LI>Shut down iCS.
    <P>
    <LI>Rename the ics50gse.db
    file.
    <P>
    <LI>Restart the server.
    </OL>

    I forgot to mention that I've cleared out ~/Library/Caches/ for my test user, as well as deleted the iWeb .plist file.

  • Error after deleting a user

    Hi,
    i have a big problem. I cannot change my process template,
    cause I get the error message:
    <i>Cannot retrieve activity template: User USER.PRIVATE_DATASOURCE.un:tftak1 doesn't exist!</i>
    But the User tftak1 is not the designer, but he was involved in the process as a default role.
    After I deleted that user I got that message.
    What could I do? I need fast help, because we want to start our testing phase...
    Thanks in advance
    Steve

    Hi Steve,
    An idea would be to recreate this user tftak1 and then to edit the process and remove it from the default roles.
    Other possibility would be to go to the Administration UI in GP and there to change the user assignement for the default roles.
    The extreme solution would be to forget your process and to create a new process object. Then you can add again your existing block to this process.
    Hope this helps,
    Best regards,
    David

  • Table name for background job with report, variant and step user id list.

    Hello All,
    I need to generate the list of scheduled backgroung job with the list of Report Name, Variant, Step User Id called. Please any one tell the SAP Table name from which I can get these data.
    Thanks in Advance,
    Amit

    Hi Rohit,
    Thanks for your reply. But from TBTCO, i can't find program/report name and variant. Just the list of background job i can see.
    Regards,
    Amit

  • Hard drive space unaffected after deleting huge user

    I deleted a user, I selected the option to have their home folder removed, and apparently the content is still on my computer. My account uses 75 GB of data, of the 250 GB drive, yet disk utility says I only have 90 GB of free space. I am using Yosemite on a 2013 macbook pro retina. I tried to find the home folder of the user, and could not find it under Computer-->Users. Any suggestions? Thanks

    Those are "expendable" snapshots created when your Time Machine drive is unavailable. If you connect your Time Machine drive and let it work they will be removed automatically.
    If you run low on space before Time Machine can run again, they will begin to be discarded to give you the space you need.

  • Standard Background Job getting cancelled

    Hello Guru ,
    In my BI dev server one standard event periodic job is geting cancelled due to following reason
    Job Name : AP_CCMS_MONI_BATCH_STARTUP_DP
    Program:  RSAL_BATCH_TOOL_STARTUPDISP
    cancelled error
    No alerts in configuration range
    Internal error:
    Job cancelled after system exception ERROR_MESSAGE
    can anybody help me in this regards
    Regards
    Deepak

    Run the job once again and lets see what happens... sometimes system cancels the job....check in ST22 if there is short dump.
    Thanks....
    Shambhu

Maybe you are looking for

  • Photostream does not sync all photos to iPhone and iPad

    I have deleted some photos from the Phototream on my iMac leaving only photos taken with my iPhone from May this year. The Photostream on bpth phone and ipad only displays about 50% of these. How do I get them all to sync?

  • FCP not reading sequence which is present in project file

    This problem started after rebooting, after Apple Software Update interrupted editing to update Quicktime. My main sequence fails to appear in the bins and the timeline. It does appear to be present in the project file when viewed with TextEdit. Earl

  • WL 6.1 Performance Issue

    We recently moved to WL 6.1 sp1 from WL 5.1 and are seeing some performance/ stability problems when stress testing our app. To isolate the problem we've taken the myJDBCReadServlet from Rob Wollen's most excellent book - j2ee applications and BEA we

  • How do i reset my Final Cut Pro 6 to factory settings

    I am working on a video shoot and as i start normally i import all my .mov files and edit... When i finished i export my movie to the same sequence settings as i was working on... My problem is after i import my .mov files and start editing die it is

  • How do i get my free 250tracks aweek music downloads

    when i joined bt broadband i was told that we get free music downloads. when we try this i was charge for it what do i need to do thanks