Standard business contents are not installed in BI system

I am new to SAP Basis Team, Consultants are saying that standard business contents are not installed in BI system. What package should I install or what is the steps I should Do. Following is the content of SAINT
FINBASIS -- 600             -- 0013   -- FINBASIS 600 : Add-On Installation
PI_BASIS -- 2006_1_700   -- 0006 -- Basis Plug-In (PI_BASIS) 2006_1_700
SAP_BW -- 700                -- 0017 -- SAP NetWeaver BI 7.0
SEM-BW   -- 600               -- 0013 -- SEM-BW 600 : Add-On Installation
ST-A/PI     -- 01K_BCO700 -- 0000 -- Servicetools for other App./Netweaver 04
ST-PI        -- 2005_1_700    -- 0006 -- SAP Solution Tools Plug-In

I'm not on a 7.x system ... but on my 3.x system, the component BI_CONT is for the business content data.
Brian

Similar Messages

Standard Business Content Queries not found

Hi all
As i was installing the business content queries for the CRM Analytics, I have found all the Queires except two queries. When checked in the SAP Help portal i can see these two queries as newly added to the list. But they are not available in the Business Content queries list.
I am working on BW 3.5 and queries which i didnt find are
0MKTG_C01_Q7001 and 0CSAL_C12_Q002
Any help is greatly appreciated.
regards
vijaykumar

hello vijay,
for each patch level of each BW version I believe a supporting OSS note is released.Please search in OSS notes stating as 'BW 3.5 patch level XY' or raise an OSS message witb this query.
In the help page for the new BC queries,does it state any detail about the required version/patch of BW?
Usually systems are kept 1-2 patch levels behind the latest SAP released patch level.
My system is at 3.5 patch 17.
I would suggest u bring system atleast to 16 or 17 as 10 is quite old patch level.
cheers,
Vishvesh

Enhancement to standard WD component are not reflecting in other systems.

A few months back, an SAP consultant created a couple of enhancements to the web dynpro component DPR_DET_DATA_TASK_O for CPROJECT in ECC (the SAP consultant is no longer available).
The first enhancement transported fine to our quality system
The changes on the transport for a second enhancement did not reflect on our quality system.
Transport did not show any errors.
None of the objects are local objects.
¿Does anyone have any idea of the cause of this problem o what I should be looking for?
Thanks in advance.

Hi,
I've had occasions where texts have not been correctly shown after a transport, and have had to manually regenerate (activate) the WD component in the test/prd systems - when I did that the texts then showed.
Hope this helps,
Chris

Installing Learning Solution in HR using Standard Business Content

Hi,
I have to set up the extraction for the Learning Solutions cubes in HR into BW using the Standard Business Content.
Could someone please gide me through the process for doing it ( Step-by-Step if possible), both from the SAP R/3 side and the BW side.
Any help deeply appreciated.
Regards

the procedure is the same as i have explained to you in your previous post...
in R/3 - RSA5 - Activate DS :
Which cube are u trying to install ? There are 2 cubes :
1) Resource researvation and 2) Training management
1) Resource reservation : INSTALL THE BELOW ITEMS
Cube :0LSO_C02
Infosource : 0HR_LSO_3
Datasource : 0HR_LSO_3 AND TRANSFER RULES AND UPDATE RULES
2)tRAINING MANAGEMENT :
cUBE:0LSO_C01
INFOSOURCE:0HR_LSO_1 & 0HR_LSO_2
DATASOURCE :0HR_LSO_1 & 0HR_LSO_2
AND UPDATE RULES AND TRANSFER RULES :
pLEASE ASSIGN POINTS IF IT HELPS...
THANKS

Standard business content not extarcting all data

Hello,
I am currently rolling out QN data. The standard business content for 2lis_05Q0task includes FECOD FEGRP & OTEIL (from table QMFE) fields however the data is not being pulled. All the other data is coming in ok. Is there something I need to do to get this data?
Thanks For your help
Mireille

Hi,
Pls Check in QMFE table if the data is present for these fields.
Take the notification no from the RSA3 extraction and
look for it in the QMFE table.
Rgds,
Ravindra.

Standard Business Content Reports

Hello,
We are on the latest SAP BI version and we also have the BO - Cystal and Xcelsius.
My question is when I try to look for standard business content, I couldn't find any.
Am I missing something here, please giude me through.
Thanks,
Ravi.

Hello,
Crystal Reports I don't believe has anything like that, we have sample reports but not likely what you are looking for.
You should post your question to the B1 forum.
Thank you
Don

Upgrade to Windows Server 2008 installation fails (reports Services to uninstall but they are not installed)

I am upgrading a Windows Server 2003 to 2008.
When I run the install it completes the Compability check and reports that Sharepoint Services and WSUS are installed. They are not installed and are not running Services either. I have attempted to remove Registry keys for these but this does not resolve
my issue.
Control Panel, Add/Remove does not report these as installed either.
How do I get the 2008 install to continue and ignore these OR how do I "truly" get these "uninstalled" if there is nothing I can do to find out what is reporting that they are installed?

SBS 2003 does contain these feature by default. Is this a small business server OS? If so I'd try them over here.
https://social.technet.microsoft.com/Forums/windowsserver/en-US/home?category=sbsserver&filter=alltypes&sort=lastpostdesc
This one may also help.
Transition from Small Business Server to Standard Windows Server
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Rejected Orders in Standard Business Content 2LIS_13_VAITM to 0SD_C03

Hello Folks,
My (new) employer has implemented standard business content for SD (VAHDR, ITM, etc.), and we are trying to reconciile data to ECC.
We are running Netweaver 2004s (BI 7.0) with very recent ECC.
It seems that 'rejected orders' still reflect the original 'incoming orders value' in ZSD_C03_Q009 Query.
I can see the rejected reason in PSA, InfoSource, and transfer structure, but not shown in Update Rules from InfoSource to 0SD_C03.
I would have thought that this is standard functionality in SAP, and doesn't require any 'enhancements' to deal with it. Howeveer, if enhancements are required, has anyone done this, and how do you deal with rejects that happen in a different period from the order creation?
Am I just missing something in standard business content?
Many Thanks for any assistance you can provide.
Regards,
Martin.

Hi,
Please check the record mode in the DSO for those records.
Please check the OSS :
http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_bct/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d373131373530%7d
-Vikram

One or more field types are not installed properly. Go to the list settings page to delete these fields.

Hi Team,
I have created Administrator -approved Infopath form template to my site and activated same template in CA.
I have used this template in one of my Form library and i can able to submit the Form with success to the library.
when i click "View Item" or "Edit Item" of the form it throws , "One or more field types are not installed properly. Go to the list settings page to delete these fields." error message.
I have refered my log files also but there is no useful information in that, please find my logs for your reference.
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
Logging Correlation Data
xmnv
Medium
Site=/sites/Prototypes
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
Monitoring
b4ly
High
Leaving Monitored Scope (PostResolveRequestCacheHandler). Execution Time=8.51588679566816
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
General
8kh7
High
One or more field types are not installed properly. Go to the list settings page to delete these fields.
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
General
8sl1
High
DelegateControl: Exception thrown while adding control 'ASP._controltemplates_publishingconsole_ascx': One or more field types are not installed properly. Go to the list settings page to delete these fields.
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
General
8kh7
High
One or more field types are not installed properly. Go to the list settings page to delete these fields.
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
Runtime
tkau
Unexpected
System.Runtime.InteropServices.COMException: One or more field types are not installed properly. Go to the list settings page to delete these fields.
at Microsoft.SharePoint.Library.SPRequestInternalClass.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName, String bstrViewName, String bstrViewXml, SAFEARRAYFLAGS fSafeArrayFlags, ISP2DSafeArrayWriter pSACallback,
ISPDataCallback pPagingCallback, ISPDataCallback pPagingPrevCallback, ISPDataCallback pFilterLinkCallback, ISPDataCallback pSchemaCallback, ISPDataCallback pRowCountCallback, Boolean& pbMaximalView)
at Microsoft.SharePoint.Library.SPRequest.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName, String bstrViewName, String bstrViewXml, SAFEA...
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
Runtime
tkau
Unexpected
...RRAYFLAGS fSafeArrayFlags, ISP2DSafeArrayWriter pSACallback, ISPDataCallback pPagingCallback, ISPDataCallback pPagingPrevCallback, ISPDataCallback pFilterLinkCallback, ISPDataCallback pSchemaCallback, ISPDataCallback pRowCountCallback, Boolean& pbMaximalView)
w3wp.exe (0x2D7C)
0x3790
SharePoint Foundation
Monitoring
b4ly
Medium
Leaving Monitored Scope (Request (GET:http://test-sharepoint:80/sites/Prototypes/TRT/TRTLibrary/Forms/EditForm.aspx?ID=47&Source=http%3A%2F%2Ftest%2Dsharepoint%2Fsites%2FPrototypes%2FTRT%2FTRTLibrary%2FForms%2FAllItems%2Easpx&RootFolder=%2Fsites%2FPrototypes%2FTRT%2FTRTLibrary&ContentTypeId=0x01010100E7EE25E5A6898C4587A6B52C808EF03300FD54861D587A7E43BA3E2E6D392A3526&IsDlg=1)).
Execution Time=32.443369199158
w3wp.exe (0x08E4)
0x2C58
Access Services
Data Layer
8jg2
Medium
ResourceManager.PerformCleanup: Disk Manager: CurrentSize=0.
w3wp.exe (0x08E4)
0x2C58
Access Services
Data Layer
5pbr
Medium
ResourceManager.EvictUnusedItems: Disk Manager: Going to evict unused items. CurrentSize: 0.
w3wp.exe (0x08E4)
0x2C58
Access Services
Data Layer
5pbs
Medium
ResourceManager.EvictUnusedItems: Disk Manager: After unused items eviction. CurrentSize: 0
Diff:0.
w3wp.exe (0x2D7C)
0x0774
SharePoint Foundation
Topology
e5mc
Medium
WcfSendRequest: RemoteAddress: 'http://test-sharepoint:32843/4ac2daef5ffe4850be08bd7bbebb5ac2/MetadataWebService.svc' Channel: 'Microsoft.SharePoint.Taxonomy.IMetadataWebServiceApplication' Action: 'http://schemas.microsoft.com/sharepoint/taxonomy/soap/IDataAccessReadOnly/GetChanges'
MessageId: 'urn:uuid:dcba94c3-2764-428c-b44f-60e703328ceb'
w3wp.exe (0x08E4)
0x2E24
SharePoint Foundation
Topology
e5mb
Medium
WcfReceiveRequest: LocalAddress: 'http://test-sharepoint.anca.com.au:32843/4ac2daef5ffe4850be08bd7bbebb5ac2/MetadataWebService.svc' Channel: 'System.ServiceModel.Channels.ServiceChannel' Action: 'http://schemas.microsoft.com/sharepoint/taxonomy/soap/IDataAccessReadOnly/GetChanges'
MessageId: 'urn:uuid:dcba94c3-2764-428c-b44f-60e703328ceb'
Jeeva

Hello,
Is there any other content type on library or check if there is any duplicate column? Could you please also show us your library columns detail? (pic is also fine of lib settings page)
If you have any ""Property Promotion" column then SP create those columns as site column and associate them with this template so check "Allow management of content types" for that form library as well.
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

"One or more field types are not installed properly. Go to the list settings page to delete these fields" while accessing website pages

We have a publishing website in SharePoint 2010. There are total 4 environments - Development, Test, Stage and Production. For some enhancements, we had to create some new lists and libraries. When we moved changes from Development to Test environment, everything
worked fine. Relevant lists and libraries in lower environments were saved as templates (in .stp format) including content, imported to higher environment, lists/libraries were created in higher environment using imported templates.
Things worked fine from Development to Test. We did similar exercise from Test to Stage environment. Now in Stage, when we access some pages, we get error message - "One or more field types are not installed
properly. Go to the list settings page to delete these fields.". ULS logs don't tell which exact list has got problems.
On searching for this error, I got many articles that explain how this could happen when we migrate from SharePoint 2007 (MOSS) to 2010. Though our case different (as all our environments are in 2010), we still tried following steps.
De-activate 'SharePoint Server Publishing Infrastructure' Site Collection feature
Go to https://site-name/relationships%20list/allitems.aspx. This is a hidden list. Delete this list.
Re-activate 'SharePoint Server Publishing Infrastructure' Site Collection feature.
Make sure that new hidden list with one item is created at https://site-name/relationships%20list/allitems.aspx
However, this didn't help as we are still getting same error message. Appreciate if someone can suggest how this issue can be resolved.
Following are ULS logs:
Unable to execute query: Error 0x81020014
One or more field types are not installed properly. Go to the list settings page to delete these fields.
System.Runtime.InteropServices.COMException: One or more field types are not installed properly. Go to the list settings page to delete these fields.
at Microsoft.SharePoint.Library.SPRequestInternalClass.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName, String bstrViewName, String bstrViewXml, SAFEARRAYFLAGS fSafeArrayFlags, ISP2DSafeArrayWriter pSACallback,
ISPDataCallback pPagingCallback, ISPDataCallback pPagingPrevCallback, ISPDataCallback pFilterLinkCallback, ISPDataCallback pSchemaCallback, ISPDataCallback pRowCountCallback, Boolean& pbMaximalView)
at Microsoft.SharePoint.Library.SPRequest.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName, String bstrViewName, String bstrViewXml, SAFEARRAYFLAGS fSafeArrayFlags, ISP2DSafeArrayWriter pSACallback, ISPDataCallback
pPagingCallback, ISPDataCallback pPagingPrevCallback, ISPDataCallback pFilterLinkCallback, ISPDataCallback pSchemaCallback, ISPDataCallback pRowCountCallback, Boolean& pbMaximalView)
Thanks!

Hi Shrishail ,
Some time this issue occurs if you have any custom filed types in the list or library and that field type is not installed on server .
Can you please check that if you are having any custom field types column on the list and library and if that is the case you need to install that field type on the server. sometimes it happens if field types are not properly deployed / Installed then
you have to uninstall that field types (retract solution) and deploy it again.
Thanks,
Ujjwal

I have tried installing Livetype 3 times and the Effects are not installed.

I have tried installing Livetype 3 times and the Effects are not installed. The animated text behaviors are not available. What might I be doing wrong?

I have tried installing Livetype 3 times and the
Effects are not installed. The animated text
behaviors are not available. What might I be doing
wrong?
I have the exact same problem! I sent the discs into my local Apple Center so they could check the discs. A month later I get them back by mail and an e-mail that says "there is no problem with the discs, therefore it must be a problem with you system". Not very helpful, and it took forever before they got time to check the discs. Pretty ****** off by now...
EDIT: It is probably worth mentioning that I get an error when installing LiveType 1B at about 4% of installing, that says "there were errors installing, please try again". I am installing the LiveType content on my LaCie 250GB USB external hard drive, although I have already tried installing the content on the built in hard drive as well..
Message was edited by: NitRam Den Gale

Standard Business Content

Hi Experts,
Can anybody out there can guide me to extract a Standard Business content in MDM.?
Points will be rewarded for stepwise helps.
Thanks in Advance.

Hi Dheeraj,
I have downloaded the SAP Standard Business content from the location :
Support Packages and Patches --> SAP NetWeaver --> SAP MDM --> SAP MDM 5.5 --> Master Data Server --> MDM BUSINESS CONTENT 5.5 --> #OS independent
And here I get a ZIP file. in this zip file there are more zip files for
1) 55610_AETICLE.zip
2) 55610_BUSINESS_PARTNER.zip
3) 55610_CUSTOMER.zip
4) 55610_EMPLOYEE.zip
5) 55610_MATERIAL.zip
6) 55610_PRODUCT.zip
7) 55610_VENDOR.zip
how can I load this into the system? I just want to load MATERIAL and PRODUCT
Kindly Help. with right answer the awards will be credited.
Pravin

Standard Business Content infocubes, dso for QM-Module

hi
Can anyone give me the "What Are the Standard Business Content InfoCubes and DSO" for QM -module.
My client wants some standard business content objects for QM-Module.
So please help me
kumar

hi,
check out the following link. hope this help you. all infocubes in QM
http://help.sap.com/saphelp_nw70/helpdata/en/b1/91823b6a86975fe10000000a11402f/frameset.htm
regards
harikrishna N

Standard Business Content & Data Targets for Case Management & CRM Survey

Dear Friends,
We are implementing CRM2007 with BW3.5 for reports for CRM Analytics. We require to Identify the Standard Data Targets & Standard Business Content (Reports) available for the following:
1. Case Management
2. CRM Survey (We have already been able to identify Data targets in BW3.5 for Web Survey & in CRM 2007 we have been able to identify Data targets for CRM Survey, as well as Web Survey. Our requirement is identifying Data Target for CRM Survey)
Please guide.
Regards,
Rajesh Banka

hi,
You can find the planning scenarios related to planning ifor CRM at this link http://help.sap.com/SAPHELP_SEM350BW/helpdata/EN/05/242537cedf2056e10000009b38f936/frameset.htm
You can also find the details on demo content for the same at http://help.sap.com/SAPHELP_SEM350BW/helpdata/EN/05/242537cedf2056e10000009b38f936/frameset.htm
Regards,
Deepti

Standard Business Contents with CLASSIFICATION data

Dear All
Does standard Business contents Material, Vendor and Customer carry CLASSIFICATION DATA.
Looking at the Field Mapping for Material and Vendor I dont see any CLASSIFICATION related fields.
What would be the best option..
Regards
Vickey

Hi Vickey,
Minaz is right. Customer and Vendor do not contain classification info. The current Material contains the eClass and UNSPC classification. The next release for the material will cover the common ERP classification (CLFMAS), too. This is currently in development, planned release is May 2009.
Best regards
Michael

Standard business contents are not installed in BI system

Similar Messages

Maybe you are looking for