Standard Code Pages in Non-Unicode System
Our System is Non-Unicode System , Single Code page configuration and Standard Code Page ISO8859-1(Latin-1) is Active.
Is it only 1 standard code page ISO8859-1(Latin-1) WILL BE ACTIVE or also other code pages ISO8859-2,ISO8859-5,ISO8859-7,ISO8859-8,ISO8859-9 also be ACTIVE in the system , and it will call the code page if the installed Europe Language call for.
Because we require additional Europe languages to be support in our current non-unicode system.
Thanks & Regards,
Gopal
Hello,
please be more specific which application. As I know there is also Latin-2 support for EBP (non-unicode) while for CCM from release 2 SAP added Latin-2 support.
SRM is not translated much more from "big 5" languages, but there was effort to translate to Hungarian as I know.
HTH
Gordan
Similar Messages
-
Unable to Open unix file in UNICODE system which created NON-UNICODE system
Unable to Open unix file in UNICODE system which created in NON-UNICODE system
We have two SAP systems both are ECC6.0 but System 1 is NON-Unicode and System2 is Unicode system.
There is a common unix directory/folder for both system.
Our requirement is to create one file on unix common folder and write the data to file from system1 .
In system2 open the same file for appending mode to write the data .
The file in system 1 created with below sentence.
OPEN DATASET g_unix_file FOR OUTPUT IN TEXT MODE ENCODING UTF-8.
Now I have to append the data from system 2 to same file.
I have tried to used below statement in system 2 to open the file but sy-subrc value comes as '8'.
1> OPEN DATASET g_unix_file FOR APPENDING IN TEXT MODE ENCODING UTF-8.
2>OPEN DATASET g_unix_file FOR APPENDING IN legacy TEXT MODE CODE PAGE
cdp IGNORING CONVERSION ERRORS .
3>OPEN DATASET g_unix_file FOR APPENDING IN TEXT MODE ENCODING Default.
4>OPEN DATASET g_unix_file FOR APPENDING IN TEXT MODE ENCODING NON-UNICODE.
Tried out all the possibilities as per F1 help given for open dataset , but still there is problem with opn file in appending as well output mode.However the file successfully open in Input mode(Read).
Please advice suggestion to resolve this issue.
Thanks.Messgae captured as 'Permission Denied". The program gets triggered with system user Id PPID.
How to check the security access of the User ID. -
Unable to display Chinese character in non-unicode system properly.
Hi, all
My system has been upgraded from 4.6C to 6.0 which is non-unicode system. Chinese characters with long length will be cut and cannot wrap automatically. But it's OK to alphabetes. How could I resolve this?
Thanks..
TD. WeiThe simple and easy way to check
non-unicode character sets are not supported on unicode system any longer. Am I right?
Transaction code i18N
Select
trouble shooting --> printing test --> smartforms --> multiple scripts, select your output device and see print preview. it will display all supported characters.
I guess, above information will be useful for closing the thread.
Regards,
SaiRam -
Error during Upgradation SCM 5.0 to SCM 5.1 Non-Unicode System
Hi,
I am Upgrading SCM 5.0 Non-Unicode System to SCM 5.1 Non-unicode on Windows 2003 Server with MSS 2005 DB. During the initial PREPARE (EXTRACTKRN_PRE) phase I am getting an error like
init
2010/06/15 07:03:45 PREPARE: START OF PHASE EXTRACTKRN_PRE
ERROR: Cannot find file 'C:\SCM_2007_Upgrade_Media\51033508_8\NW_7.0_SR3_Kernel_WINDOWS__LNX_X86\KN_WINDOWS_X86_64_AUPG
KERNEL.TOC'
SEVERE ERROR(S) OCCURRED IN EXTRACTKRN_PRE !!!
The file name it is looking for does not exist in any of the Kernel versions I have checked. If I try to skip this step it is asking for the PASSWORD. How can I get this password? (only from SAP Support or any note?).
What is the Solution for the above ERROR. Please help.
Thanks,
Ajay.> I am not posting the question in the same group. I am posting in different groups due the confusion of in which group to post > > and of course to get faster response. All people cant check all the groups to answer. Moreover I am not keeping the questions > open. As soon as I get the answer I am proving the answer in every group and immediately closing the question.
> So what is the problem with that? I do not think this is creating any inconvenience to any one, just increasing the number of questions in the group.
This is not wanted as written in the "Rules of engagement". This is a public forum, not a "help desk".
> OK, As you said If I post only in a single group do you guarantee that you will check every time all the groups to answer my question/ find my question?
Again, this is a forum where the question are answered on a volunteered basis. "Demanding" help is not the way to go, you can ask for help but there's no guarantee that you'll get an answer. If you urgently need help use the official support channels or get yourself a consultant on-site who can answer all your question instantly.
> And please paste the URL of those rules that this is wrong. Since I didnt read that.
It's the first entry in every forum, it contains the "Rules of Engagement" which say:
Please do not Cross post.
Post your question in the most appropriate forum; not multiple forums. This is bad netiquette and will might only aggravate potential repliers.
Just imagine if everyone like you would paste questions in several forums.
Markus
Edited by: Markus Doehr on Jun 15, 2010 5:29 PM
Edited by: Markus Doehr on Jun 15, 2010 5:30 PM -
Client Copy between unicode system and non-unicode system
Hello,
we have to build up a new system for japan. It is planned to install a new 4.7Ext200 unicode system and then make a client copy from a non-unicode 4.7Ext200 (language= german, english) system to the unicode system. I don't think that this is possible way, but I can't find information regarding client copies from non-unicode to unicode. I would advice the project to convert the existing non-unicode system to unicode, make a system copy for the new system and then install japan languages. Any information, which can help me.
Regards,
AlexanderHi,
without conversion client copy is not possible
look at following
Re: Client copy between unicode and Non-unicode
regards,
kaushal -
Code page of the receiver system could not be found".
Hi,
We are getting an error in IDOC-XI-IDOC scenario that the "code page of the receiver system could not be found".
What could be the reason for this error?
Because of this error all IDocs are getting stuck in XI.
Kindly help.
Thanks,
JohnHi john,
Have a look at this thread:
"Could not determine code page" inbound side error
This could be usefull.
Carlos -
Error in code page mapping for Source system whil loading the data from ECC
HI Gurus,
I am working in a implementation project, Recently our BI sand box is up, when i am doing my load from 0comp_code_attr it is throwing an error "Error in code page mapping for source system"(This is my first load from ECC).
In details tab it is showing as the data is sent from the source system but the data is not reaching to the PSA.
Please let me know if there are any settings needs to be made.
Many thanks in Advance
JagadeeshHI V,
Thanks for your quick response. I did it but it didn't resolve the issue. since the system id which i am having is 3 digits(LEC) but there it is taking only 2 digits, so i clicked on the button called Propose system ids, it has praposed LE, but the issue is stil there.
Do we need to do any settings in LBWE??
Thanks and Regards
Jagadeesh -
Error in code page mapping for Source System
Hi All,
We are Loading data into BI system from MDM System.
It was loading fine but Yesterday we got an error " Error in code page mapping for Source System"
Message Class: RSDS_ACCESS 13.
We alreday tried to Search any IDOCs with error/unprocessed , but there isn't any.
Any pointers for this error will be Helpful.
Regards,
MayankOur SP currently SAPKW70019 , the SAP note mentioned above required to apply SP for 13, which we already beyond that...unfortunately we still face the same problem .. almost every day ..
any advice.. ?
Edited by: Edi Erwan Abu Talib on Jun 22, 2009 8:22 AM -
Conversion Error in IDOC : Unicode to Non-Unicode System
EBP system (Unicode) posting goods movement to 4.6C (non-Unicode) using message type MBGMCR ( Function module - IDOC_INPUT_MBGMCR).
**In Non-Unicode System***
Idoc INBOUND error : Status 51
An error has occurred assigning data (E1BP2017_GM_ITEM_CREATE ).
I found in debugging value assigned from EDIDD ( E1BP2017_GM_ITEM_CREATE = IDOC_DATA-SDATA ) for field AMOUNT_LC is "0000 0.00"
system catch exception with CONVERSION_ERRORS
**Unicode System**
Value for Amount_lc is 0.00
Can anybody help me how to solve above issue?
regards,You can do something like this..
TABLES E1BP2017_GM_ITEM_CREATE .
E1BP2017_GM_ITEM_CREATE-AMOUNT_LC = <field value> .
MOVE E1BP2017_GM_ITEM_CREATE TO IDOC_DATA-SDATA .
can u tell me what is the type and value of the variable whose value you are assigning to AMOUNT_LC .
Reward points to all the helpful answers.
Thanks. -
Pdf conversion from a non unicode system to a unicode system
Hi,
I have a BSP application that runs on a unicode system which retrieves data to be output in pdf from a non unicode sap system.
We get the data from the non unicode system through a RFC call and store data in table otfdata type itcoo, then we perform the conversion through the following:
perform pdfcnv_convertotf in program saplstxw
tables otfdata
pdf
using
'T'
archive_index
1
'T'
pdf_bytecount
app_tot_xstring
and then perform the hex conversion, but the printout is full of # chars. The good characters are followed by the # char. It looks like the unicode conversion is not good.
Thank you in advance for your help.
Best regards,
DonatellaWelcome to SDN
check out this weblog where Thomas Jung explains unicode conversion for excel, the same thing could be applied in your case as well
/people/thomas.jung3/blog/2004/08/09/bsp-download-to-excel-in-unicode-format
Regards
Raja -
CP850_BIN2 for non unicode systems??
Hi All
This is possibly a really stupid question and I think I know the answer, but I need some one else to say yes!
We are currently running a SQL upgrade, from 2000 to 2005, for ore ECC6 platform. As part of the upgrade it is recommended that you change the DB collation from SQL_Latin1_General_CP850_BIN to SQL_Latin1_General_CP850_BIN2 which allows unicode data to be sorted properly.
My question is, if this enhancement is to correct a unicode issue, will it affect my current non-unicode system if applied. I don't want it to cause any issues if I apply it during the upgrade.
I don't think it will for various reasons, but I am not 100% can anone let me know if I am right, please!
Thanks in advance!
PhilHi,
you will have no issues with your current system when you go to BIN2 now (before you upgrade to SQL 2005). And you have to keep in mind, that you have to have BIN2 for all newer releases of SAP. So if you plan to ever upgrade your system to a newer release in some point in time, you should go to BIN2 now, as otherwiese you have to perform a homogenous systemcopy with R/3 (which is not so much fun) if you miss it now. On SQL 2005 you can't change the collation easily, so if you don't have the correct one, you only can change it when you unload the data, drop the DB, create the DB in the correct collation and reload the data.
Regards
Clas -
Dear All,
We have ERP-sr2 softawre. we want to install a non unicode system. but here by default is unicode. please let me know is it possible to install non unicode system. if yes then how i ll proceed.
Regards
DeepakI don't know how is unicode by default... you should be able to pick.
Anyhow, why don't you download a new installation master from SAP Marketplace?
regards
Juan -
Does this select stmnt is supported by non unicode system?
hi all,
does this select stmnt is supported by non unicode system?
SELECT * FROM DD02L INTO TABLE I_TABL
WHERE TABNAME IN S_TABL
AND AS4LOCAL = 'A'.
this select stmnt is going for dump in 4.6.
pls help me....
regards,
sri sri.Hi,
It's working fine in both (unicode and non-unicode) systems,
TABLES: dd02l.
SELECT-OPTIONS:
s_name FOR dd02l-tabname.
DATA:
w_tabl TYPE dd02l,
i_tabl LIKE TABLE OF w_tabl.
SELECT *
FROM dd02l
INTO TABLE i_tabl
WHERE tabname IN s_name
AND as4local = 'A'.
LOOP AT i_tabl INTO w_tabl.
WRITE:/
w_tabl-tabname,
w_tabl-tabclass.
ENDLOOP.
Regards
Adil
Edited by: Syed Abdul Adil on Jun 18, 2008 12:39 PM -
Issue with Data flow between Unicode and Non Unicode systems
Hello,
I have scenario as below,
We have a Unicode ECC 6.0 and a UTF 7 Legacy system.
A message flow between Legacy system to ECC 6.0 system and the data is of 700 KB size.
Will there be any issue in this as one is Unicode and other is non Unicode?
Kindly let me know.
Thanks & Regards
VivekHi,
To add to Mike's post...
You indicate that your legacy system is non-Unicode and the ERP system is Unicode. You also said that the data flow is only <i>from</i> the legacy system <i>to</i> the ERP system. In this case, you should have no data issues, since the Unicode system is the receiving system. There <b>are</b> data issues when the data flow is in the other direction: <i>from</i> a Unicode system <i>to</i> a non-Unicode system. Here, the non-Unicode system can only process characters that exist on its codepage and care must be taken from sending systems to ensure that they only send characters that are on the receiving system's codepage (as Mike says above).
Best Regards,
Matt -
MySAPERP 2004 Non Unicode System
Hi all,
Presently I have started the installation of mysap ERP 2004 database instance installation for a non unicode system.Database instance has process has an Instance RAM of 512MB.(overall 1G).It has been almost 24hrs that i started this DB instance and still 12 processes are pending.
Does it usually happen, or is it becoz of just 512MB RAM?
Thankz
YogiUsually it does not happen that way. Seems abnormal to me. I believe Installation log will be able to tell you something.
Maybe you are looking for
-
Any way to get an estimated shipping date?
Is there a way to get an estimated shipping date? I have my original November 4th in my email but there is people ordering the same phone as me and getting them a lot sooner (And they ordered after me, online) I placed my order on September 16th if t
-
My workflow is not listed in the GOS (Services for object)
Hello Experts, I developed a workflow and linked the BO ZBUS2081. This is sub type of standard BO BUS2081. I am using the custom event INVOICEBLOCKED to trigger the workflow. The workflow is triggered propely when the invoce is created (with block) t
-
How can I restrict the number of emails in iOS 7?
In the previous versions of iOS you could indicate how much emails you wanted to store on your iPhone. Now in iOS 7 that option is gone. I don't want to clogg my iPhone whit all my emails. What can I do to restrict the number of emails?
-
Manualy onfigure database with grid control
Hi All, I am using EM grid control 10g r4 to monitor many of the 9i and 10g databases in the environment. Need help in this scenario. On a db server (10.2.0.2) I have grid control agent (10.2.0.4) installed and able to monitor databases on it. Recent
-
Hello , my console.app crashes. Looking at it with Instruments , i see that it block when trying to read an directory , but i cannot figure out which directory is that. Process: Console [354] Path: /Applications/Utilities/Console.app/Contents/MacOS/C