Standard config RAM vs custom config prices?

for the custom mac pro, you can get 4 1gig sticks for 1100, or buy the standard mac pro and upgrade to 4gigs (2 sticks @ 2 gigs each) for 1500? Is there anyway to get apple ram for cheaper or in another config?

You can buy Apple RAM separately from the Apple Store… look under the accessories section in Memory. Otherwise, you can bargain with a reseller unless of course you know someone who works at one. It doesn't have to be specifically an Apple reseller either, just one that can order from an Apple distributor like Ingram Micro.
What's wrong with 3rd party RAM?

Similar Messages

  • Use of Adjust function to copy standard config for Upgraded system

    I have worked on a number of different ERP 6 systems that have been upgraded from previous versions.
    Some of the basic standard delivered config will be missing and there is a simple task of using the "adjust" function to copy the standard config  from client "001" to the developement client "XXX"
    However I know have a client who has the missing config in the dev client "XXX" but when you use the adjust back to "001" there is nothing there.
    Do you know a way to re-create the core config?
    An example is in Dispute Management - if you go to the case type config. SAP delivers F_DM as a base - but there is nothing there.
    thanks

    Try to copy from  client "000"

  • Cisco Clean Access - Intercept ACL standard config

    If implementing an out-of-band CCA solution, with a router acting as the Network Access Device (NAD), would the Intercept ACL standard config be to allow access to the network, or just to the submet where the AAA Policy Server, etc are?
    If there are URLs to examples, that would help too.
    Thanks!

    First, you will need to open up traffic in the unauthenticated role for tcp port 636 to the LDAP server.
    The deal with the certs is that you need the CAM to be able to trust the LDAP servers cert, so you need the root cert corresponding to the LDAP servers cert. You can then upload that on the CAM under "CCA Manager" > "SSL Certificate", drop the box down to "Import Certificate" and then drop the next box down to "Trust non-standard CA". Upload and install
    the root to there.

  • ( customer expected price)

    Sap R/3 Customer expected price  formula 9 is used, with stastical l entry.
    system compares expected price of a line item with net price computed by system .if system net price is not with value range 0.05 customer expected price then item is blocked.
    If we copy this formula & keep our own value range tolerance  expected price less than equal to -50.  
    What shall be the outcome & with examples.

    Assuming that the condition value formula-routine that you assign is coded correctly and works like the standard (#9), then status of the expected price is set to u201CBu201D when the EDI1 price is not within your specified tolerance.
    Sales order item-level incompletion procedures can be configured so that such a situation renders the sales document u201Cincomplete.u201D  Subsequent document processing is not possible until the expected price status is changed to u201CA Expected price correctu201D or u201CC Expected price not correct, but released.u201D
    Incomplete SD documents can be processed with transaction V.02. 
    Transaction V.25 allows for the release of orders having invalid expected prices.
    Regards,
    Ken

  • Report Custom Valuation Price on Material

    Hi
    I want to have a custom valuation price for material.
    I have Load Valuation Price in ODS.
    Now I want This Values (Valuation Price) available in every level of drill down (Characteristic).
    Which is the best way to do that?

    Dear Gordon,
    Thanks for your resonance, basically my requirement is at the time of issue materials from stock, Material cost should be calculated based up on invoice price, not based on MAP or Standard price.
    Thanks
    Venkat

  • Customer consignment price

    Hi,
    I would like to know from where system retrive the price during good issue for customer consignment using movement 633?
    Thank you

    Hi,
    The Customer consignment price retrieve the same way with standard process.
    Use same Delivery type and Billing type.
    You can go to Condition @ Item level and click Analysis button to see.
    Rgds

  • Customer specific prices in Catalog SAP ERP E-Commerce

    Hi Experts,
    We have implemented SAP ERP E-commerce -- ECC 6.0  ISA 5.0
    Initially we implemented a B2B scenario without TREX engine.
    VMC component is active (IPC).
    In the catalog we don't see customer specific prices. What are the steps to enable customer specific prices in the catalog. 
    Do we need TREX engine ?
    Do we need catalog views for customers to get customer specific prices.
    Please advice.
    Thanks and Regards,
    Ram

    Hello Ram,
    Maybe have a read of thread Prices on Product catalog for e-Commerce R/3 this contains some helpful information.
    regards
    Mark

  • Can we enter data in any standard table directly through custom form??

    Dear All,
    Can we enter data in any standard table directly through custom form??
    I have create custom form in R.12. I want to insert data in quality standard table directly through custom form. Need experts guideline.
    Awaiting regards,

    Hi,
    Can we enter data in any standard table directly through custom form??
    I have create custom form in R.12. I want to insert data in quality standard table directly through custom form. Need experts guideline.
    Awaiting regards,
    I would not recommend touching the standard tables at all unless you are being guided by the SR. For a record to be in the standard table it should go through series of validations based on the what operation you are performing and some times datas are dependent upon the other tables, and also some times the same records are hit to so many other tables simultaneously.
    Therefore I would not recommend this brother.
    Thanks &
    Best Regards,

  • How can I display error log of a standard program in my custom program?

    Hello Experts,
    I have a requirement where I submit a standard program from my custom module pool program as a background job. I use the TO SAP-SPOOL and thus the log is available when I go to SM37 and check the spool list. I have a requirement that I display this log in a tab within my module pool after the completion of the program. I am unable to fins a proper solution to this. I have both the spool number & the log number but I am unable to find function modules which will help me print them within my program. I found many ways to display it but as full screen and not with in my program.
    Could someone please help me with this.
    Thank You

    Hi,
    FM to read a spool request is "RSPO_RETURN_ABAP_SPOOLJOB".
    If the error log is displayed as a list output in the standard program, you can also use the syntax SUBMIT Program... and RETURN with export to memory addition.
    Then you will be able to read the list output from memory.
    Regards,
    Munesh.

  • Error while calling standard OAF page from custom Oracle Form

    Hi,
    I am calling standard OAF page from custom oracle form using the following code.
    FND_FUNCTION.EXECUTE(FUNCTION_NAME=>'FUN_TRX_ENTRY_OUT_VIEW_BATCH',
    OPEN_FLAG =>'Y',
    SESSION_FLAG =>'N' ,
    OTHER_PARAMS =>'&ViewBatchID = "' || NAME_IN('FUN_AGIS_LINE_D.BATCH_ID') ||
                        '&CallingFunction = "' || 'MANEXPINQ' ||'"');
    But I am getting this error.
    oracle.apps.fnd.framework.OAException: This request was not processed as the request URL %2FOA_HTML%2FOA.jsp%3Fpage%3D%2Foracle%2Fapps%2Ffun%2Ftransaction%2Fentry%2Fwebui%2FViewOutBatchPG%26OAPB%3DFUN_PRODUCT_BRAND%26OAHP%3DFUN_SSWA_MENU%26OASF%3DFUN_TRX_ENTRY_OUT_SEARCH%26_ti%3D1217029204%26language_code%3DUS%26%26ViewBatchID%20%3D%20%22203148%26CallingFunction%20%3D%20%22MANEXPINQ%22%26CallFromForm%3D%27Y%27%26oas%3DqZqg3tmdEdUNyw_HtskVow.. contained potentially illegal or un-encoded characters. Please try again by submitting a valid URL or contact your systems administrator for assistance.
    Please let me know any thing I missed out here.
    Any suggestion will highly appreciated.
    Thanks & Regards,
    Sunita

    I am using FND_FUNCTION.EXECUTE to call a OAF page from PLSQL in R12. I am getting following error"Error(9,23): PLS-00302: component 'EXECUTE' must be declared"

  • How to use standard function keys as custom keys

    how to use standard function keys as custom keys.
    i have encountered that problem while developing a screen, there i'm supposed to use standard function key F2 ( which actually meant for choose) for clearing the screen fields where the cursor is present and f1 for saving data that entered in screen fields, etc...
    kindly help me out.

    Hi ,
    Solution to use SAP reserve function keys F1 .. F4 (mostly this requirement comes up for RF screens) can be acheived by assigning your new Function code using the Menu path Utilities --> F key Consistency in the Menu Painter (SE41) . Once you assign your cutom function code to the standard Fn keys the only remaining step is to make sure that you set a curson on any of the field on sceen by using the Key Word "SET CURSOR" .
    If you dont use the key word SET CURSOR in the PBO of the screen then you might not see any response for F4.
    Thanks

  • Can we modify the standard AOL Message with custom Message in Seeded Page?

    Hi,
    I have a requirement to change AOL Message with custom Message in Seeded Page.
    In a seeded OAF page when a user clicks on a submit button a standard AOL Processing Message is populated.
    I Need to change the Standard Message and call Custom Message.
    Did controller extension and found that both the messages are populating.
    called the code after super and tried to call before super also.
    Did any one face this issue and resolved it. Kindly provide the solution.
    Regards
    Chaitanya

    Hi Gyan,
    I have tried by extending a sample custom controller.
    Below is the code of TestCO calling create message
      public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
        super.processFormRequest(pageContext, webBean);
          OAApplicationModule am = pageContext.getApplicationModule(webBean);
          if (pageContext.getParameter("Test") != null)
              OAException confirmMessage = new OAException("AK", "FWK_TBX_T_EMP_CREATE_CONFIRM",    null,
              OAException.CONFIRMATION, null);
              pageContext.putDialogMessage(confirmMessage);
      }Then I extending the TestCO to XXTestCO and it is calling Update Message
        public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
          super.processFormRequest(pageContext, webBean);
            OAApplicationModule am = pageContext.getApplicationModule(webBean);
            if (pageContext.getParameter("Test") != null)
                OAException confirmMessage = new OAException("AK", "FWK_TBX_T_EMP_UPDATE_CONFIRM",    null,
                OAException.CONFIRMATION, null);
                pageContext.putDialogMessage(confirmMessage);
        }got below Confirmation
    Confirmation
    Employee &EMP_NAME with the number &EMP_NUMBER has been created.
    Employee (&EMP_NAME) has been updated.
    Tried below approach also calling the message before super class
        public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
            OAApplicationModule am = pageContext.getApplicationModule(webBean);
            if (pageContext.getParameter("Test") != null)
                OAException confirmMessage = new OAException("AK", "FWK_TBX_T_EMP_UPDATE_CONFIRM",    null,
                OAException.CONFIRMATION, null);
                pageContext.putDialogMessage(confirmMessage);
          super.processFormRequest(pageContext, webBean);
        }got below Confirmation
    Confirmation
    Employee (&EMP_NAME) has been updated.
    Employee &EMP_NAME with the number &EMP_NUMBER has been created.
    My requirement is to print only the message which I have kept in Extended controller i.e. Update message
    Regards,
    chaitanya

  • Customer Master Price List

    Does anyone know if I can run a SAP transaction code that I can get a customer master price list report?  I need to see the customer, item #/SKU# and list price for all items sold to the cusomter.  Any help would be appreciated.  Thanks

    Hi,
    I don't think we have tcode for Customerpricelist but
    You can Get all items for the customer from KNMT Table. get the condition records(KUNMH) for these Materials from A091 table and finally get KBETR (price) based on the condition record from the KONP table. This would be termed as list price-
    Try to post the issue in respective forum ....
    Regards,
    Satya

  • Standard tool bar for custom Dialog program

    Hi,
       I need to have a standard tool bar functionality like (Search & Print) for my screen 9000. Could you please let me know how can i get it. And i have a ALV in that screen, if i print the data will all the lines will be printed or only displayed lines will be printed, could you please let me know how to get all the lines of ALV. Basically i have some fields & ALV... everything should be printed out.
    Thanks

    my question is when you create a custom screen like 9000, pf-status also need to created. If i need to printing functionality what needs to be done. If i need all the standard functions in my custom screen...what i need to do.
    In that custom screen i have normal fields and one ALV. if i have print button in the standard tool bar and if i use it will it print all the lines of alv along with other fields. {please note that i am not talking about the alv print icon, i am talking about that standard tool bar print icon}.
    Thanks

  • Calling standard report to my custom report

    Hi ALL,
    i need to call a standard report into my custom report
    for example :
    i am having a report with all PR related data
    now i am having nearly 20000 purchase requisitons and there related data .
    now i will get all the Source of supply for each PR
    using bapi BAPI_SOURCEDETERMINE_GETSOS.
    now i am having all the PR's and source of supply
    then i need to assign source of supply .
    using the standard report RM06BZ00.
    then how to call this report and assign source of supply .
    Will be there any performance considerations for calling this report in a loop (20000)
    and how to catch the result
    if source of supply  was assigned ok
    if not how.
    Thanks in advance .
    siva

    Hi Prabhu,
    Use the Submit Statement for calling the standard report u can use the options available with the submit statement for passing any parameters ,
    for reference u can refer following code....
    MOVE: 'S_LIFNR' TO seltab_wa-selname,
            'S'      TO seltab_wa-kind,      " SELECT-OPTION
            'I'      TO seltab_wa-sign,
            'EQ'     TO seltab_wa-option,
            ct1_key-lifnr TO seltab_wa-low.
      APPEND seltab_wa TO seltab.
      CLEAR seltab_wa.
      MOVE: 'S_DOCNO' TO seltab_wa-selname,
            'S'      TO seltab_wa-kind,      " SELECT-OPTION
            'I'      TO seltab_wa-sign,
            'EQ'     TO seltab_wa-option,
            ct1_key-docno TO seltab_wa-low.
      APPEND seltab_wa TO seltab.
      CLEAR seltab_wa.
      MOVE: 'S_DOCTYP' TO seltab_wa-selname,
            'S'      TO seltab_wa-kind,      " SELECT-OPTION
            'I'      TO seltab_wa-sign,
            'EQ'     TO seltab_wa-option,
            ct1_key-doctyp TO seltab_wa-low.
      APPEND seltab_wa TO seltab.
      CLEAR seltab_wa.
      MOVE: 'P_CT1' TO seltab_wa-selname,
            'P'      TO seltab_wa-kind,      " SELECT-OPTION
            'I'      TO seltab_wa-sign,
            'EQ'     TO seltab_wa-option,
            'X' TO seltab_wa-low.
      APPEND seltab_wa TO seltab.
      CLEAR seltab_wa.
      SUBMIT zexc_ct1_prg
       via selection-screen
          WITH  SELECTION-TABLE seltab.

  • Customer specific price maintanance

    Hi experts,
    we already maintained one base price for customers on price group base. Again my client want to introduce  Customer specific price (how shall i maintain) Is there any condition records maintance for these customers,  pls guide me how to proceed.
    Meera

    Hello,
    the combination of fields for which it is possible to insert a price, depends on the access sequence assigned to the condition type.
    For example access sequence PR00 allows to insert prices with combinations:
    Customer/Material
    Price List Type/Currency/Material
    Price List Type/Currency/Material
    Material
    Best rgards,
    Ivano.

Maybe you are looking for