Standard controllers versus version 4 behavior

Set up my controller for the evb3 as indicated in the logic manual.. Worked great. Then set up a different scene on my controller to control the evp88, once again according to the manual, did not work. Then in song settings under midi I switched from standard controllers to version 4 behavior...Evp88 started responding perfectly! Unfortunately, evb3 with the previous controllers scene settings no longer lined up..Why is it like this? Do I have to switch this song setting in the middle of a live performance to be able to control these two instruments...Thanks, mike Peters

Hey Justin, thanks alot for answering. I couldn't control the evp88 according to the manual using the new behavior. Switched to version 4 and they lined up perfectly. Then my evB3 was completely messed up.. I took your advice and went back to current behavior....found the controllers for the evp88 by trial and mainly error...all works now...Thanks again. Hey do you know if you can send patch changes to logic instruments other than just the next or previous intrument key command...mike peters.

Similar Messages

Standard or International version of JRE?

Hello!
Is there any way of identifying whehther I'm using the standard or International version of JRE?
I know this question has been asked before but no one has answered has far as I can see.
Regards Calle

Thanks, I thought about doing something like that to force an exception, I think it might be abit crude.
Nowbody out there that know of any other way to do this?
I'm making an applet that use an encoding that doesn't exits in the standard version, I would like to tell the user that they have to install the java plugin with international support.
/ Calle

Mac or standard or upgrade version?

Hi,
I am looking at buying Adobe photoshop and premiere elements software, but I'm confused by the term standard or upgrade version.
I have a mac so should I just buy the mac version?
Thanks for any help.
Spud47

Hi, Thanks for the answer. I understand that upgrade usually means changes to already purchased software, and is therfore less expensive.
However the Adobe Photoshop and Premiere Elements upgrade is more expensive than the other versions so I thought there may be more features/tools or whatever?
I'll go for the Mac version.
Thanks again.
Spud47

Where can i download CS 6 Design Standard Traditional Chinese version?

Hi,
Can anyone advise me where can I download CS 6 Design Standard Traditional Chinese Version?
Thanks
David

David if you choose the download option at the time of purchase the installation files will be available under your account at http://www.adobe.com/. You can find additional details at Find a download link on Adobe.com.

Adobe Standard XI full version costs 299$ and subscription to same version is only 13$/month = 156$. Do I get the same product? Is it in both cases installed on my computer and ready to use even if I'm not logged on internet?

Adobe Standard XI full version costs 299$ and subscription to same version is only 13$/month = 156$. Do I get the same product? Is it in both cases installed on my computer and ready to use even if I'm not logged on internet?

They are the same product.
The "full" is a traditional perpetual license. Install - register - activate - use.
Does not "call home" to validated that is a paid for install (the one time activation takes care of that).
Internet? Connectivity is needed in order to download and install updates.
(& Yes, you do want those)
The "subscription" license will require periodic internet connectivity. If I recall correctly all "subscription" applications must call home once a month.
That is how the application "knows" it is being paid for and is legit.
While within the call home periodicity connectivity is not required for usage of the application.
As with a "full" license you'll need connectivity to download/install application updates
Be well...

Adobe Acrobat 9 Standard download/trial version

Hello,
I am looking for a download for Adobe Acrobat 9 STANDARD. I have a valid key, but no CD. I've been to http://prodesigntools.com/all-adobe-cs5-direct-download-links.html but that is all PROFESSIONAL versions.
Is there anywhere on the Internet where I can download a trial version of Adobe Acrobat 9 STANDARD?
Thank you!

Hello Romsinha,
Thank you for your reply. Unfortunately, I have tried that already. The chat support says to go to the forums. Here is a screenshot of the options I have when attempting to contact support: http://i.imgur.com/Tg7uiHP.jpg. In the chat, it asks you to select the product you need help with. Since I need assistance with version 9, I select Acrobat X & Lower versions. Once that is selected, 4a states that Acrobat 10(or is it X? not very consistent) requires a Support Contract. Then in parenthesis, 4a states "Support for Acrobat 8 and lower versions is available only on the user to user forums...".
I called Adobe phone support and confirmed that my serial number is valid, but stated that support via phone for Acrobat 9 is not available and directed me to the forums. Now I'm on the forums and I'm directed to contact chat support. So I go to chat and it says to go to the forums for help. Where do I have to go just to download a trial of Acrobat 9 standard so I can put in my valid serial number?
If the imgur link does not work. Here is the text of the chat window:
4. Please select the product you need help with: *
Select One
Adobe Reader X / Adobe Flash Player
Acrobat X & Lower versions
Acrobat XI
[email protected]
Adobe Digital Editions
Acrobat X Installation Issues
4a. Support for Acrobat 10 requires a valid Support Contract. Do you wish to buy a support contract? (Support for Acrobat 8 and lower versions is available only on the user to user forums & online self support) *
Yes
No
Adobe offers paid phone support for a US$39 fee per incident* as well as other customized support options. To purchase support, call 800-833-6687 and follow the prompt for "installing." To avoid waiting on hold, request a callback from the first available agent. You can also schedule a callback for a more convenient time.
Please close the chat window and call on the above number to buy your Support Contract.
Please visit http://www.adobe.com/support/ and choose your product for its online Help and Support Center. We also have User to User forums available at http://forums.adobe.com/index.jspa for any additional queries which are periodically monitored by Adobe personnel as well as the user community.
Please close the chat window and visit the Support Portal / User to User forums.
4a. Support for Adobe Flash Player / Adobe Reader requires a valid Support Contract. Do you wish to buy a support contract? *
Yes
No
Adobe offers paid phone support for a US$39 fee per incident* as well as other customized support options. To purchase support, call 800-833-6687 and follow the prompt for "installing." To avoid waiting on hold, request a callback from the first available agent. You can also schedule a callback for a more convenient time.
Please close the chat window and call on the above number to buy your Support Contract.
Please visit http://www.adobe.com/support/ and choose your product for its online Help and Support Center. We also have User to User forums available at http://forums.adobe.com/index.jspa for any additional queries which are periodically monitored by Adobe personnel as well as the user community.
Please close the chat window and visit the Support Portal / User to User forums.
5. Please enter your complete mailing address with zip / postal code and phone number separated by a comma.
Example: 12345, XYZ Lane, San Jose, CA 95110, 123-456-7890

Standard or Pro Versions?

As instructed I went to the following link to re-download Adobe Acrobat 9 Standard http://helpx.adobe.com/acrobat/kb/acrobat-8-9-product-downloads.html However there is no choice or option here to ba able to choose Standard or Pro so I downloaded the package anyway assuming it would select at install. However the install is for Pro only and of course my Standard serial will not work? Where can I get the Standard version from?

if you follow all 7 steps, you can download a trial via one of the links on this page using a browser that accepts cookies: http://prodesigntools.com/adobe-acrobat-x-10-pro-reader-suite-direct-download-links-ddl.ht ml
and activate with your serial number.
if you have a download problem (eg, you see an error page or you are offered an incorrect version), you probably didn't follow all 7 steps. typically, failure to meticulously follow steps 1,2 and/or 3 is the problem, but your browser must also allow cookies so that (a restrictive browser setting) is another potential source of problems.

Standard and Pro versions compatible with Windows 7

Hello
I am looking for a list of Adobe Acrobat Standard and Adobe Acrobat Pro that are compatible with Windows 7. We are upgrading over 1000 computers to Windows 7 and we have many different versions of Adobe Acrobat writer Stndard and Pro.
Thanks

There are also issues with 32 vs 64-bit systems. The latter requires updating your version in general. Generally the initial releases have not worked in the 54-bit environment. There are many driver issues with 64-bit systems and probably should look carefully if 64-bits are needed. The 64-bit system is useful if you are computationally focused, but may not be much of an advantage in standard office environments. Just be careful. If you are installing OFFICE 2010, then you need AAX for PDF Maker compatibility -- prior versions of Acrobat only allow printing from the OFFICE 2010 suite. Some folks have been successful with AA8 on 32-bit Win7 (I have only seen 1 post that would suggest success with 64-bit Win7). Prior versions of Acrobat can be made to work on 32-bit Win7 systems, but require work arounds (i.e., the AcroTray tool that automates the conversion to PDF process fails in Win7). The 64-bit system will probably fail for most of the earlier versions in such cases.
Realize that you may have to deal with Win8 shortly that has it's own issues.

Subclassing standard doclet in version 1.4

I have a modified version of the standard doclet from 1.3.1. I'm trying to transfer the functionality from this doclet to a subclass of the 1.4.1 standard doclet. My modified Standard.java contains the following method:
public static ConfigurationExcluderDoclet configuration() {
if (HtmlDocWriter.configuration == null) {
HtmlDocWriter.configuration = new ConfigurationExcluderDoclet();
return (ConfigurationExcluderDoclet)(HtmlDocWriter.configuration);
This won't work in 1.4.1 as the variable "configuration" in HtmlWriter has been modified to protected access only. Is there a workaround for this so that I can still pass my configuration instance?
Thanks,
Linda Howard

Hi Linda,
Just delete the code below and replace with "return new ConfigurationExcluderDoclet();". There is absolutely no need to initialize HtmlDocWriter.configuration in your configuration() method. This field is now initialized in the constructor, as it should be. If you need to access the configuration in your doclet, use Standard.configuration, not HtmlDocWriter.configuration. Your doclet should inherit the configuration from class Standard.
-Jamie Ho

Standard or Enterprise Version

I am putting together a proposal at work to start using
ColdFusion and I want to confirm that the Standard Edition will
suffice. I know the company will not want to purchase the
Enterprise Edition and I don't think that it is needed but want to
make sure.
We are going to have one apache server for the Website and
have one W2K3 server for ColdFusion. The Apache server will send
ColdFusion requests to the ColdFusion server. (Makes sense. :-) )
Is there any reason we would need the Enterprise Edition?
Thank you for any input.
Bob

The standard version works for us well here (at a bank). We
had enterprise back under v4.5 but dropped down to standard when we
upgraded to MX.
The one thing I predict we'll eventually miss (maybe) is the
Gateway technology. And we've got a ways to go yet before anyone
here starts talking seriously about clustering, as well.

ADOBE Standard X PC Version to MAC

Just a general question?
A few months ago I purchased a copy of Adobe Standard X for PC, unfortunately a few weeks later the PC crashed. I have recently purchased a MAC instead, but realized I cannot install the file on the MAC. My questions is as follows: Can I purchase the Pro upgrade and install the upgrade onto the MAC or to i have to purchase a full version of Adobe X pro?

Do this in two distinct steps, making sure that each step is working properly before you move on to the next step.
Move to Lightroom 4 on the Mac; download the 30-day trial of Lightroom 4.4 for the Mac, install it, and then move everything to the Mac. http://members.lightroomqueen.com/index.php?/Knowledgebase/Article/View/1165/187/how-do-i- move-my-catalog-photos-and-other-lightroom-files-to-a-new-computer
Once that is working properly, upgrade to Lightroom 5.2

Silent Install Acrobat Standard xi trail version

Hi Support,
I am trying to silent install Acrobat Standard trilal version. I customized the package using Adobe Customization Wizard with leaving blank for the serial key. When I try to install the application silently, it giving me a "error".
my question,
Is it possble to silent install Acrobat Standard trial version?
Thank you ..

Trial version is only provided in Acrobat Professional and not Acrobat Standard. If you need trial, pls. use Acrobat Pro installer instead of Acrobat Standard.
Thanks,
Vinod

Can I upgrade my CS5.5 design standard to later version?

I have a volume user licence for CS5.5 design standard purchased in 2011, can this be upgraded to a later version?

Hello John,
please have a look there for first informations:
http://www.adobe.com/products/cs6/faq.html and "Upgrade eligibility, pricing, and purchasing options"
Hans-Günter

Purchasing Adobe Creative Suites 6: Design Standard Middle Eastern Version

Hi
I intend to buy Adobe Creative Suites 6: Design Standard however in Middle Eastern version. I am currently living in Turkey thus would like to know whether purchase through the site would enable me to get access to this version. And whether there is on shelf pack available in Turkey

Bonjour!
Voulez-vous que je déplace la discussion dans le forum Français, ou peut-on continuer en anglais?
Le lien fonctionne pour moi, me donne cette page: https://www.adobe.com/cfusion/support/index.cfm?event=opencscase&loc=fr&issue=z015&cseduty pe=STR
Quel est votre navigateur internet?
Hello!
Do you want me to move this to the french speaking forum, or can we continue in English?
The link works for me, it gives me this page: https://www.adobe.com/cfusion/support/index.cfm?event=opencscase&loc=fr&issue=z015&cseduty pe=STR
what is the browser that you are using?

Standardized OS/ programs versions

It really depends on how many systems you have to manage. If you have any more that 20 or 30, you are better off to make every one exactly the same (cookie cutter approach). This way you manage what goes onto the computers because you lock them down so the users can install unauthorized stuff. If one computer breaks they all break. You fix (patch) one computer you fix them all.
You set up a consistent patch deployment method for your software updates. The big thing/annoyance is with the MS Apps, there is a huge change between 2003 and 2010 in supported files and features. You need to have a stable environment so documents created at one workstation will function as intended on all workstations.

Is it common place among your workplace to have different OS's on workstations? Is there a benefit to having windows 7, windows 8, windows xp, and soon possibly windows 10 throughout the office space? How about different versions of programs excel 2003, 2010, 2013 is this an IT nightmare or your everyday life? The differences are minor sure, but how important is it to have consistency in the workplace? Is it cost justified to upgrade to a standard? Is it more important for workstations or servers or totally unimportant?
This topic first appeared in the Spiceworks Community

Standard controllers versus version 4 behavior

Similar Messages

Maybe you are looking for