Standard cost estimate could not be found for the material

Dear All,
We have 4 manufacturing plants and 30 sale depots. We are maintaining price control (S) for FG and SFG in Manufacturing plants,price control (V) at depots for the same material code. we are getting an error message " standard cost estimate could not be found for the material" while doing billing at depot.
Please give me suggestion.
Your suggestion should be appreciate.
Thanks in advance............
AND
My client want to see profitability at manufacturing plant level and need break up for the COGM. So how can i get the values of depot sales.
please let me know how to do........

Hai
Price control should be S for Depot also. You need to run standard cost estimate in DEPOT after entering additive cost under CK74N for frieght, excise duty etc. To transfer the standard cost from the source plant you need to make configuration in OMD9 defining the receiver and sender combination so that system can pick up the cost from source plant. This special produrement type needs to be asigned in the material masters of DEPOT under MRP 2 view.
Pushkala

Similar Messages

Shipping data could not be determined for the material

hi all,
while creating STOs for i get a message that shipping data for the material canoot be determined for the material. the plants are maintained as customers. the shipping tab in item detail in STO order is not appearing. the shipping point is getting dertmined for sales orders from the same plant and material. am also able to ceate STOs between other pair of plants.
thnx in advance
saurabh
Message was edited by:
saurabh diwakar

Hi,
Shipping point is determined by "shipping conditions" + "loading group" + "plant".
Shipping conditions are fetched from customer master / or if maintained in the sales doument type they are fetched from there.
Loading group fetched from material master.
Plant fetched from CMIR / CMR / MMR.
You do the shipping point determination using the transaction code "OVL2" If SC or LG or PLANT are deviating from the entries in the customer or material master then also you will not get the shipping point.
Reward points if solution helps.
Regards,
Allabaqsh G. Patil

CoCreateInstance returns 0x8007007e (Module could not be found) for the first call only at system startup on Windows 2008 Enterprise SP2

Hi Guys,
I'm experiencing a problem with CoCreateInstance, where it returns error 0x8007007e.
The code is something like this:
HRESULT hRes = S_OK;
CComPtr<IMyInterface> spObj;
if(FAILED(CoInitialize(NULL))) { /* quit */ }while(FAILED(hRes = spObj.CoCreateInstance(CLDIS_MyClass, NULL, CLSCTX_LOCAL_SERVER)))
// LogFailure(hRes);
Sleep(10);
The problems occurs only on a single machine having Windows 2008 Enterprise SP2 installed (it works fine on other machines / OS versions). It happens only during the system startup (this is a Windows Service) and only for the first call of the CoCreateInstance.
The second call always succeeds.
The problem does not occurr when starting the service manually from Services.
I did some investigation using Process Monitor and found that the HKCR\CLSID\[CLSID of MyClass]\LocalServer32!LocalServer32 registry value is accessed before the failure. The registry value exists - it is added by the Windows Installer during
installation.
If I remove the registry value then the CoCreateInstance always succeeds.
I've been trying to lookup for some documentation on HKCR\CLSID\...\LocalServer32!LocalServer32 but haven't found anything useful other than it's a "Windows Installer Entrypoint". I assume that the Windows Installer does some integrity checks when
calling CoCreateInstance for such class and this fails for some reason but currently I fail to find the reason.
Can anyone help finding out what's the root cause of the 0x8007007e error here, please? Any help or tip is much appreciated.
Many thanks!
Marcin.

Hi Marcin,
This forum is mainly for talk about the product use related issue and not the best place to talk about the develop issue, for the develop issue we can post in MSDN forum for
the further help and your issue may need capture a dump then for the further analysis it is not an efficient way to work in this community since we may need more resources which is not appropriate to handle in the community. I‘d like to suggest that you submit
a service request to MS Professional tech support service so that a dedicated Support Professional can further assist with this request.
MSDN forum
https://social.msdn.microsoft.com/Forums/en-US/home
Please visit the below link to see the various paid support options that are available to better meet your needs.
http://support.microsoft.com/default.aspx?id=fh;en-us;offerprophone
Thanks for your understanding and support.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

No standard cost estimate found for the material

Hi,
When we are trying to generate the bill systems throws the error as "no statandard cost estimate found" whereas the material is a kmat material.
Actually as per the requirement we should not Run standard cost estimate for any material,we will update the standard price in MR21
What are the settings that i need to do to avoid the above error message while doing billing?
Following error msg is appearing:-
No standard cost estimate could be found for material "300000"
Message no. K/834
Diagnosis
In Profitability Analysis, an attempt was made while valuating with material costing to read for material "123456" a standard cost estimate released on posting date "02.10.2008".
The system has discovered that there are no error-free standard cost estimates released in plant "BP01" on the specific date "02.10.2008" for material "123456".
The material cost estimate is accessed according to the CO-PA Customizing settings for costing key "YG1" under Define Access to Material Costing.
Display Cost Estimate for Material
Display Material Cost Estimate without Quantity Structure
System Response
It is not possible to process the document further.
Procedure
Check your system settings.
Thanks
Kishore

Remove the Costing keys assignment in the step "assign costing keys to any
characteristics" in COPA Configuration settings.

Acquisition:Acquis. and production costs' could not be found for area 01' in ABZON

Hi All
I m getting one error 'Account 'Acquisition:Acquis. and production costs' could not be found for area 01' in ABZON. I know we have to maintain accounts using Tcode-AO85 but
1) how to know the correct Account Determination.
2) How to know the correct G/Ls to be maintained in AO85.
Pls advice.
Thnx in advance.
Regards
Pankaj

Hi,
In ABZON, if you are acquiring with existing asset then you cna have access to account determination / asset class from asset master. If you are also creating new asset then you will have access to asset class.
In OAYZ, we assign account determination to asset class. and in AO85, we asign GL account to account determination.
Hope this will help you.
Thanks,

Account 'Cost elem. for settlmt AuC to CO objects' could not be found for

Hi All,
I am facing one error massage at the time of CWIP Asset settled in Cost centre
Account 'Cost elem. for settlmt AuC to CO objects' could not be found for area 01
Message no. AU133
Which G/L Account (cost element) we have to assing there in Account determinati A090.
What is empact this our G/L Account.
Please help me to resolve this issue.
Thanks & Regards,
juhis

Hi AP,
Thanks for your reply,
We find one element there assgin but that is not a G/L account what we do we can assgin that element in the Account determination in that asset account determination OR we have to create new G/L Account.
When we create new G/L Account in which Account head we have to create and what is impact that g/l account in our Balance sheet account.
Please help me ot understand that Process.
Edited by: juhis022 on Mar 2, 2012 10:15 AM

Account 'Cost elem. for settlmt AuC to CO objects' could not be found for a

Hi All,
we are facing one error massage at the time of settlment KO88.
Account 'Cost elem. for settlmt AuC to CO objects' could not be found for area 01
Message no. AU133
Diagnosis
When creating the accounting document, the system could not find account 'Cost elem. for settlmt AuC to CO objects' in depreciation area 01 for company code CSEB.
Procedure
Enter this account in the account determination for Asset Accounting.
Thanks & Regards,
juhi

Hi Juhi...
Please check the below procedure....
If you are using the Internal order process, then
KO01 - IO Creation
ME21N - PO creation with IO as Account assignement
MIGO
MIRO
1. IO to AUC Settlement
Define the Settlement Rule iin IO - KO02   (AUC Asset)
KO88
Settlement type is "Automatic"
For Cost analysis....you can refer to KOB1   or    KO03 -> EXtras -> Cost Analysis
2. AUC to Fixed Asset or Cost Center
KO02 - Settlement Rule - Cost center   or   Fixed Asset
KO88
"Full Settlement"
If the process is
AIAB and AIBU
Refer to
AW01N
Hope it gives some idea
Thanks

Account 'Acquisition:Acquis. and production costs' could not be found for a

dear all
when i am posting periodic asset postings through ASKB below error is comming ple help
Account 'Acquisition:Acquis. and production costs' could not be found for area 90
Message no. AU133
Diagnosis
When creating the accounting document, the system could not find account 'Acquisition:Acquis. and production costs' in depreciation area 90 for company code SCIL.
Procedure
Enter this account in the account determination for Asset Accounting.
thanks

Dear bikkina.prakash
please check were you properly maintained the AO90 for GLs for Depreciation
also check whether you changed any depreciation key in asset master(means previously you run depreciation. by mistakenly any body changed)
Regards
shankar

A valid bill of material could not be found for material

Hi,
Our's is SAP release 605. While doing sales order cost estimate (CK51N) we are getting following error message:
A valid bill of material could not be found for material 1000000012
Message no. C2223
Diagnosis
Material 1000000012 is marked as a phantom assembly. When the system tried to explode a valid bill of material for material 1000000012, it could not find one.
System Response
The system generates a normal reservation for 1000000012.
Procedure
Check the bill of material for material 1000000012.
We have checked BOM and everything seems correct. please suggest where I am doing mistake.
Regards,
Bijay

Dear Bijay kumar,
Material 1000000012 is marked as a phantom assembly,so it must be set with a procurement Type E and special procurement
type 50 in the MRP2 view of the material master or else at BOM level.So as a standard behaviour the system is expecting a
BOM for the phantom assembly 1000000012.Check in T.Code CS03 whether you are able to find the BOM components for this
material 1000000012.If BOM is not found means you have to create a BOM for this pahantom assembly because during the GI
for the main assembly/product the system consumes the components of the pahantom assembly and not the phantom assembly
(as in general there wont be any stock maintained for this material 1000000012).
So check with this and revert back.
Regards
Mangalraj.S

Error -Account 'Down-payments clearing account' could not be found for area

When I am trying to pass a down payment entry by debiting vedor and crediting bank with asset it is giving an error as follows.
Account 'Down-payments clearing account' could not be found for area 01
Message no. AU133
Please help me to rectify the same.
Thanks in advance
Deepak

HI
Please pay attention at the possible causes of message AU133:
1. Error AU133:
   a) You have not defined a contra account for acquisition value postings in the Asset Accounting Customizing settings (Transaction AO90).However, this is required as of Release 4.6C because, as is the case for all other integration postings in Asset Accounting, invoice receipt postings have to be displayed in Asset Accounting via the new posting kernel to ensure an identical document
structure.
   b) You have defined the account in Asset Accounting, however, it is not created in the affected company code.Check whether the account is correct and create it for the company code, if necessary.
2. You have entered an asset reconciliation account for the "Contra account: Acquisition value posting" (for example, the same account as for   "Acquisition:Acquis. and production costs" account).This is not permitted.Check whether your account determination is correct
   (Transaction AO90) in Asset Accounting Customizing. The same applies
   for the 'Contra account: Down payment posting'.
3. As "Contra account: Acquisition value posting" you entered an asset G/L account. If necessary change the automatic posting indicator in the G/L account master record.
4.Check if you need revaluation accounts in depreciation areas involved   (AO90):
-Revaluation acquis. and production costs
-Offsetting account: Revaluation APC
Please run also programm RACKONTO where missing or wrong customizing
the accoutn determinations per company code is displayed
Also have a look at note 7595 in this regard.
Please assign points if it useful.
Regards
Ravinagh Boni

Blocking creation of production order if standard cost estimate is not done

Hi PP gurus,
Can anyone help me in blocking the creation of production order if the standard cost estimate is not done for the particular posting period.

Hi,
I do not think there exist a standart check. You can use exit EXIT_SAPLCOZF_003 to block creation of production order by sending error messages based on any condition.
Regards.

C2 223 A valid bill of material could not be found for material 5089

Hi Experts
I have Production orders that use a phantom material 63955 with Std costing control. This material uses three materials (5089,5233 & 5235) of moving average control.
Material 63955 is a HALB and uses all the numbers 5089,5233 and 5235 which are ROH.
With costing material 63955 with CK11N or CK40N, the error is
C2223 A valid bill of material could not be found for material 5089 and the same for 5233 and 5235
Diagnosis
Material 5233 is marked as a phantom assembly. When the system tried to explode a valid bill of material for material 5233, it could not find one.
System Response
The system generates a normal reservation for 5233.
Procedure
Check the bill of material for material 5233
The 5* numbers do not have a bill of material and are purchased externally.
What must I do now please? These materials cannot be costed.
Kind regards
Dawn

Hi..
You check whether material 5233 have procurement type ‘E’ or ‘X’ and
special procurement type ‘50’ in MRP2 view of Material master.
Material 5233 with the above conditions is Phantom assembly.
If Material 5233 is material master for external purchasing, Material 5233
should have procurement type ‘F’ and special procurement type space.

When I open iTunes it is slow to open for one, and two when it does see my iPhone and i go to sync it this is what I get in return... The iPhone "My Name here" could not be synced because the iPhone could not be found on the network. that is a pop up box

When I open iTunes it is slow to open for one, and two when it does see my iPhone and i go to sync it this is what I get in return... The iPhone "My Name here" could not be synced because the iPhone could not be found on the network. that is a pop up box in middle of screen that says that it does it like every time I go to sync the phone after i do app updates. I am getting very frustrated by this can someone please help. I have made 2 other discussion topics about this and no replies on them. Please if anyone can help I ask for help. This has occurred ever since the iOS 5.1 update and the iTunes 10.6.0 and still continues with the iTunes 10.6.1 update just yesterday and perhaps even worse now. PLEASE HELP IF YOU CAN. I have looked through my network settings etc and everything looks good here on my side.

When I open iTunes it is slow to open for one, and two when it does see my iPhone and i go to sync it this is what I get in return... The iPhone "My Name here" could not be synced because the iPhone could not be found on the network. that is a pop up box in middle of screen that says that it does it like every time I go to sync the phone after i do app updates. I am getting very frustrated by this can someone please help. I have made 2 other discussion topics about this and no replies on them. Please if anyone can help I ask for help. This has occurred ever since the iOS 5.1 update and the iTunes 10.6.0 and still continues with the iTunes 10.6.1 update just yesterday and perhaps even worse now. PLEASE HELP IF YOU CAN. I have looked through my network settings etc and everything looks good here on my side.

Can someone tell me how to fix this error in 10.4.11 on a G5 Quad Core 2.5GHz Tower...A valid video device could not be found for playback. [-70017]

Can someone tell me how to fix this error in 10.4.11 on a G5 Quad Core 2.5GHz Tower...A valid video device could not be found for playback. [-70017]

That's an error reported from DVD Player I believe...
kDVDErrorMissingGraphicsDevice = -70017, // A valid graphics device is not available.
There's some conjecture it has to do with HDCP, or Video Card problems, but the only 2 cures/fixes I found were Software related, one was cured by updating the OS, another by replacing the Video kexts.
I think this error also shows up if trying to use DVD player in Safe Mode, (too much research isn't good! ).
At the Apple Icon at top left>About this Mac.
Then click on More Info>Hardware>Graphics/Displays and report like this...
NVIDIA GeForce 7800GT:
Chipset Model:          GeForce 7800GT
Type:          Display
Bus:          PCI
Slot:          SLOT-1
VRAM (Total):          256 MB
Vendor:          nVIDIA (0x10de)
Device ID:          0x0092
Revision ID:          0x00a1
ROM Revision:          2152.2
Displays:
VGA Display:
Resolution:          1920 x 1080 @ 60 Hz
Depth:          32-bit Color
Core Image:          Supported
Main Display:          Yes
Mirror:          Off
Online:          Yes
Quartz Extreme:          Supported
Display:
Status:          No display connected
Can't think of much to try at the moment, but perhaps reapplying the big 10.4.11 combo, Repair Permissions, & reboot would help, not sure.
The combo update for PowerPC-based Macs...
http://www.apple.com/support/downloads/macosx10411comboupdateppc.html

I can't get dvds to play "There was an initialization error. A valid video device could not be found for playback. [-70017] Anybody know how to resolve this?

I can't get dvds to play and, instead, get "There was an initialization error. A valid video device could not be found for playback. [-70017]" I went in for a Genius appt Friday and it played for the tech...but now I'm back home (one and a half hours from the store) and I'm getting the error message again when I try to load a dvd. Any recommendations?

Hello, try this...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
Reboot... any change?

Standard cost estimate could not be found for the material

Similar Messages

Maybe you are looking for