Standard cube for caluclaing taxations

I want to caluclate some taxations in MM like MOD VAT,Excess recovery ,Landed cost,Planned freight,Basic cost.Total duty
Is there amy standard cube available for this in BW

Hi,
Check whther the ODS 0FITX_O03 helps you here or not.
One of the query on this ODS .
http://help.sap.com/saphelp_nw2004s/helpdata/en/47/c648ec5d098346962b3f2bb038683c/frameset.htm
With rgds,
Anil Kumar Sharma. P
Message was edited by:
Anil Kumar Sharma

Similar Messages

There is a standard cube for 0SEM_BCS_10?

Hi guys. I`m willng to use 0SEM_BCS_10 to get data fo preparation to consolidation. But I didn't find a standard infocube to get these data that cames from 0SEM_BCS_10..it will be a "staging" cube where the BCS cube (0BCS_C10) will get data by data stream ...do anyone know if there is this standard cube or I will have to create a Z?
Regards,
Thiago

Hi,
There is no standard cube for this datasource. You have to create a Z-cube. And please use more searching in the forum. I answered such a question a couple of times before.

BW 3.5 standard cube for FI

Hi all,
I am in implementation project hear our team implement all the modules mm,sd,pp and fi we complete implementation of mm,sd,and pp reports in FI client wants to activate standard cubes in bw
because they are failed in r3 fi implementation can any body tell me standard cube for FI module in bw
so that we complete our work as soon as possible .
Thanks

http://help.sap.com/saphelp_nw2004s/helpdata/en/fb/6ec7393168b42be10000000a114084/content.htm
Click on the Arrow - Go to each sub area - Expand Infocubes

How to find datasource and standard cube for given R/3 table

Hi All,
Can anyone help me that how to find a datsource, standard cube and Standard BI reports for given R/3 table.
For example if am having the table names "EKKO (Header)
EKPO (Line item)
EKET (Schedule Lines)
EKBE (PO History)
EKKN (Account Assignment/WBS)
EKAN/EKPA (Partner Info)" for all these tables how can i find the standard datasource and standard Cube.
Please help in this. I will assign the points.
Regards,
Shanthi

https://wiki.sdn.sap.com/wiki/display/BI/BWSDMMFIDATASOURCES
MM
Data Sources Tables
Purchasing
2LIS_02_SCL EKKO, EKBE, T001, T001W, EKET, EKPA.
2LIS_02_HDR EKKO, EKBE, T001, EKPA.
2LIS_02_ITM EKKO, EKBE, T001, T001W, EKPO, TMCLVBW, T027C, ESSR, T147K, T147
2LIS_02_SCN EKET, EKES, EKPO.
2LIS_02_CGR EKBE, EKES, EKPO.
2LIS_02_SGR EKET, EKBE, KKPO
Inventory
2LIS_03_BX stock tables, MCHA, MARA, T001, T001W, CALCULATED FROM MBEW, EBEW, QBEW.
2LIS_03_BF MSEG, MBEW, MKPF.
2LIS_03_UM BKPF, MBEW, QBEW, EBEW, BSEG.
MM
Purchasing   Datasources
ODS
0PUR_O01 2LIS_02_ITM, 2LIS_02_SGR, 2LIS_02_CGR, 2LIS_02_SCN.
0PUR_O02 2LIS_02_HDR, 0PUR_O01
0PUR_DS03 2LIS_02_SCL and 2LIS_02_SGR.
CUBE
0PUR_C10 2LIS_02_SCL and 2LIS_02_SGR.
0PUR_C07
0PUR_C08
0PUR_C09 0PUR_O02, 80PUR_O01, 2LIS_02_HDR
0SRV_C01 2LIS_02_S174
0PUR_C04 2LIS_02_S011, 2LIS_02_SCL, 2LIS_02_ITM, 2LIS_02_HDR
0PUR_C01 2LIS_02_S012, 2LIS_02_ITM, 2LIS_02_SCL
0PUR_C02 2LIS_02_S013
0PUR_C05 0MM_PUR_VE_01
0PUR_C06 0MM_PUR_VE_02
0PUR_C03 2LIS_02_S015
Inventory Management
CUBE
0IC_C03 2LIS_03_BX, 2LIS_03_BF, 2LIS_03_UM
0IC_C02 2LIS_03_S195, 2LIS_03_S197
0IC_C01 2LIS_03_S196, 2LIS_03_S198
SD
Data sources Tables
2LIS_11_VAKON VBUK, VBUP, VBAK, VBAP, VBKD, KOMV, T001.
2LIS_11_VAHDR VBAK, VBUK, T001
2LIS_11_VAITM VBAP, VBUP, VBAK, VBKD, VBAJP, T001, VBUK, PRPS.
2LIS_11_VASCL VBAP, VBUP, VBAK, VBEP, VBKD, T001, PRPS
2LIS_11_VASTH VBUK
2LIS_11_VASTI VBUP, VBUK
2LIS_11_V_ITM VBAP, VBAK, VBKD, VBUP, T001, PRPS, VBUK.
2LIS_11_V_SCL VBUP, VBEP, VBKD, VBAP, VBAK, T001, PRPS.
2LIS_11_V_SSL VBAP, VBEP, LIPS, WVBEP, VBUP
2LIS_13_VDKON VBUK, VBRP, KOMV, T001, VBRK.
FI
DATASOURCES Tables
Cost Center Accounting
0CO_OM_CCA_1 COSP, COSS
0CO_OM_CCA_2 COSP, COSS
0CO_OM_CCA_3 COSL, COKL.
0CO_OM_CCA_4 COSR
0CO_OM_CCA_5 COSB
0CO_OM_CCA_6 COOMCO
0CO_OM_CCA_7 BPJA, BPPE.
0CO_OM_CCA_8 COST, TKA07,COOMCO, CSLA, COST, COKL.
0CO_OM_CCA_9 COVP (COEP& COBK), COSP, COST, COEJ, COEP, T001.
0CO_OM_CCA_10 COOI, COSP_VTYPE.
Product Cost Controlling
0CO_PC_PCP_01 KEKO, TCKH3, TCKH8.
0CO_PC_PCP_02 KEKO, TCKH3.
0CO_PC_PCP_03 CKIS, T001K, TKA02, KEKO, MARA, MBEW.
0CO_PC_PCP_04 CKIS, T001K, TKA02, KEKO, MBEW, MARA
0CO_PC_01 AUFK, AFPO, COSS, COSP, COSB, COSL, COKEY, TKA09, TKV09
0CO_PC_02 AUFK, AFPO, COSS, COSP, COSB, COSL, COKEY, TKA09, TKV09
Hope this Helps.

BW standard cubes for public sector

Does anyone know if BW 3.5 add-on is delivered with and standard infocubes for Pubic sector?
Thanks
Jeremy

jeremy,
I would like to add here that there is something for public services. You can check out under business content for public services , but also it would be helpful for us if you could indicate the nature of public services and also keep in mind the requirements that you have and the business content might not meet your requirement.
http://help.sap.com/saphelp_nw04/helpdata/en/47/ac463c9c9ffc3ae10000000a114084/frameset.htm
this is for public sector but you might have to do a dep dive based on what your requirements are .
Arun

Creation of DSO for a standard cube

Hi All,
I am new in BI modeling area & looking for help from you experts. What I have to do is , I need to create a DSO for a standard Cube 0PS_CS01.
In this I am doing is to take that data source which is in BI content for this Cube and from there I am extracting data fields and keyfields. Once this DSO is ready I will create update rules from this standard Data source to this newly created to DSO and after that I will create Update rules for Cube based on this DSO.
Can you guys help me to find the best way to collect keyfields & data fields based on the data source. Also suggest me if it is the right way to design data model fot the same as I desribed above.
All helpful replies will be appriciated with points.
Thanks a lot in Advance.
Sincerely,
John

1>double click on cube(0PS_CS01) --copy all characteristics(these will be key fields in DSO).
DSO only take 16 key fields so rest will go under data fields.most unique 16 fields will go under key fields.
2.all the keyfigues will go under data fields of DSO.
change settings and activate DSO.create transformations between (DSO and DS) and ( DSO and CUBE);
Hope this helps.
if you need further info just check these two 0FIAP_C03(cube) and 0FIAP_O03(DSO).compare the characteristics and key figure with the key fields and data fields respectively.you will get good idea.
in the above cube the data flow is like DS-DSO-CUBE

BI 7.0. Standard cubes and reports for SD, MM, FI, CO, PP, PM

Hi All,
I desperately looking for a list of standard cubes and report for SD, MM, FI, CO, PP and PM .... is there a document on this complete
I tried searching but no avail
<removed by moderator>
Thanks in Advance
Nathan
Edited by: Siegfried Szameitat on Nov 7, 2008 9:20 AM

Can you tell how did you search ???
Just go to RSORBCT transaction and go to infocubes :
Just do find as 0SD .... you will find all Business contents for SD related, similarly for other modules..
If you have chosen grouping as "Before and After wards" you should find the entire flow along with reports.
Hope this helps.

Error while transporting standard cube

Hi
We are facing errors while transporting a standard cube and all relevant objects.
While collection it throws errors saying certain routines are not active, whilst unable to find those routines.
If we ignore and transport the same, transformations es are not being transported.
How to resolve this., please provide inputs.
regards
Lavanya

Hi Lavanya
The error log says these objects are in repair mode in this system. I searched the system for the trnsformations, but they are not present. How do we resolve these
This only means that the objects were changed directly in the target system (could be QA or prod) and are captured in some request. You need to find the relevant request on the target system and take the appropriate action. You could chose to delete the request or transport it from QA to Prod.
Find the requests on the target system and you will see the tranaformations collected. However, it is not going to be an easy taskl for you to find as the TR will be with the technical name. But this is definitely the reason for the error.
Cheers
Umesh

PP - Cube for Actual Capacity Utilization (in hours per confirmation)

Hi,
I need to extract the exact operation confirmation times for PP orders from ECC6. For example, if a single order started at 11:00am and then was confirmed twice before being finished in the evening, the client wants to see the actual times used for each operaiton. This way they want to subtract from 24 hours and see the idle time of the production operation.
For this purpose I have checked all the cubes under 'Production/process orders' infoarea. The cube '0PP_C03 Plan/Actual Comparison Operation/Work Center View' seems to have the operation time but in days. This is first of all causing a rounding off problem and secondly it does not show the time gaps between confirmations on the same operation.
Any help will be highly appreciated.
Regards,
Adeel Hashmi

Hello ,
Method 1 :
1- Create a one Multi provider .
2- Copy the standard cube 0PP_C03 and make your own Cube with necessary fields ( enhance it as per your requirement ).
This New Cube should be Virtual Cube .
3- Create a Report on Mutiprovider ( which you created in step1 )
4-select the relevant char and key figure as per requirement .
5- you can use the selection and formula in report for time difference ..
In this method restrict the query on virtual cube only .
Method 2 :
From R/3 you have record like this :
Operation 1( O1) ---> 11:00 :00
Operation 1( O1) --> 14:00:00
Operation 2( O2) --> 10:30:00
Operation 2( O2) --> 13:30:00
1- Create a one Key figure with Data Type TIMS .
2- Include this key figure in the Cube which you have created in above steps ( Method1 )
3-Write a routine to fillt he data for Keyfigure ..if O1 record find calculate time difference .
4-Now you have time difference in BW for operation
5-Add new keyfigure in MP and use in Report .
Hope this helps .
Regards
Vikas Sharma
Robert Bosch

Opening standard cubes in SAP BW

Hi all,
I'm new at SAP BW and I'm trying to start the load of a standard cube (the example is 0OPA_C02).
I've added the infopackage with datasource (0CO_OM_OPA_4) but in fact I don't know if this is correct and according with best practices.
Also, I believe is necessary to create a DTP but When I try to create it creates automatically a new transformation and doesn't use the standard one.
What am I doing wrong?
Regards

Actually you are facing the DTP problem just because one transformation is missing (TRCS) which I mentioned before. First of all let me know when you installed the cube which option did you choose "Data Flow before or Only Necessary Objects"? Coz when you are creating the transformations by your own, it means you havn't installed the update rules or (in 7.x architecture) Transformations. Also when you cannot find the transformation TRCS it is most probably your data source is 3.x and you are trying to implement 7.x data flow on it. To verify that kindly right click on your datasource and check if you can see the Migrate option in context menu. If it is there then it means your data source is for 3.x data flow and you need to migrate it first for using with 7.x dataflow. If you don't see the option MIGRATE there and if you dont wanna go for strandard installation of update rules or transformation thn just right click on the desired cube and choose create transformation from the context menu. It will create the transformation (which name would be starting from TRCS) and after that when you will create the DTP, you will face no error. Second way is to install the update rules or transformations from BI content of the desired cube and then create the DTP. What I recommend is first you check if the data source is 3.x or 7.x and after that go to BI content and install the update rules/transformations according to its data flow version. In case of any query/confusion let me know.

Are there specific BW Info Cubes for RTR, ALM, PTP, OTC?

Looking to understand if there are standard delivered reporting cubes to support Records to Report (RTR), Asset Lifecycle Management (ALM), Procure to Pay (PTP) and Orders to Cash (OTC).

Asset Lifecycle Management
There is standard content for [Plant Maintenance|http://help.sap.com/saphelp_nw70/helpdata/en/f6/7a0c3c40787431e10000000a114084/frameset.htm] and [Customer Service|http://help.sap.com/saphelp_nw70/helpdata/en/c1/840c3c40787431e10000000a114084/frameset.htm].
Procure to Pay
There is standard content for [Purchasing|http://help.sap.com/saphelp_nw70/helpdata/en/ed/62073c44564d59e10000000a114084/frameset.htm] and [Accounts Payable|http://help.sap.com/saphelp_nw70/helpdata/en/ee/cd143c5db89b00e10000000a114084/frameset.htm].
Order to Cash
There is standard content for [Sales and Distribution|http://help.sap.com/saphelp_nw70/helpdata/en/17/cd5e407aa4c44ce10000000a1550b0/frameset.htm] and [Accounts Receivable|http://help.sap.com/saphelp_nw70/helpdata/en/ee/cd143c5db89b00e10000000a114084/frameset.htm].

Oliver Wright Class A Reporting and SAP Standard Cube

Dear All,
has someone experiences with Class-A KPIs Reporting in SAP based on the concept of Oliver Wright?
In his handbook he wrote that this concept reflects the effort and effort and achievement of thousands of client companies who have used our checklist standard to differentiate their business. So its supposed that SAP Standard might also support that concept in general by providing eventually standard cube if this trendy in U.S.
Does SAP support that concept or do you know who is there an third party software available to read this KPI out of SAP/APO in a structured way
see link: http://www.oliverwight.com/checklist.htm
Thanks for your support, Markus

In my experience, you just have to learn to read the code. The SAP books may tell you something but they are not at the level that you'd really need them to be if you wanted to know where best to put your enhancement.
It is certainly worthwhile checking all the documentation in the classes/methods there can be some useful things there. However, generally I think you are just better off reading through the code and working out how it all hangs together. Most WDA code is reasonably well written - in that it is fairly modular and has a reasonable degree of encapsulation. This certainly helps.
This is where experience really starts to matter!
NW7.02 will give us some nice UML diagrams to help understand the application flow - that will help, but until then, it's just a matter of being good at understanding code.
Good luck.
Chris

Standard Queries for MM

Please send me the link where i can find standard cubes,.....Queries for Inventory and Purchasing.... I think this is the link for inventory management please correct me if i am wrong. Pleasee send me the link for puchasing...billing, shipment,
http://help.sap.com/saphelp_nw04/helpdata/en/fb/64073c52619459e10000000a114084/frameset.htm
Regards
Naga
Message was edited by:
naga yadavalli

Hi Naga,
You can start looking at the business content from this link:
http://help.sap.com/saphelp_nw2004s/helpdata/en/3d/5fb13cd0500255e10000000a114084/frameset.htm
Here you can also use the search box (upper right) and in the dropdown choose BI Content. Start looking at Supply Chain Management to find the sub areas for Procurement, Manufacturing and Inventory Management.
You can also find the best practices for some modules here:
http://help.sap.com/bp_biv170/html/bw.htm
Hope this helps...

No applicable data found.. Erro in standard cubes.

Hi,
I am getting an error during the utilization of standard cubes in BI 7.01.
After the data load is complete, when i tried to execute the standard cube "Warehouse Workload History - Deliveres" , or
any other standard cubes, NO DATA CAN BE FOUND.
When using Bex Query Designer on Web, the message is : NO DATA CAN BE DISPLAYED. This could be due the current selection of variable or filter values.
When using Analizer in excel, the message is : NO APPLICABLE DATA FOUND
But if we create the same query from beginning, not using the standard cube, with the same fields and indexes and records,
the values are displayed.
We also try to save as the same standard report with another name and doesn`t work.
My system is SAP EHP1 for SAP NETWEAVER 7.0 in SO Linux and Oracle Database.
SAP_ABA , SAP_BASIS, PI_BASIS, SAP_BW is 701 level 07.
BI_CONT is 705 level 01.
please any advices

Check whether the standard report is created on the Info-provider on which the data is loaded .You can see the same in the query properties next to the check query button in query designer as you are able to see data , by creating another query on the inforprovider .

Falied "Configure OLAP cubes for Project Web App" in Project Server 2013

Hi
I'm trying to use the PS2013's capability for generate SSAS Cubes; but after I execute
the steps described on “Configure OLAP cubes for Project Web App (http://technet.microsoft.com/en-us/library/jj943761.asp)” the only thing
achieved is that the state being "Processing…" and the log:
===== Initiating OLAP database build process =====
[10/11/2013 2:48 PM] Cube build request message has been added to the Project Server queue
When I check the jobs, the one who is associated with the cube creation is on "Succeeded" state but the OLAP database is never created. There is no evidence I think on the Sharepoint log.
For notice:
10/11/2013 14:36:24.41 w3wp.exe (0x1A70)                       0x1848
Project Server                   Analysis Cube Building
8ida        Information        Standard Information:PSI Entry Point:   Project User: PROJECTSERVER\system Correlation Id: 0cea4e03-a432-e311-9401-001cc094718e PWA Site
URL: http://<server-name>/sites/Walkthroughs SA Name: Project Server Service Application PSError: NoError (0) Cube build request was placed on the Project Server Queue. afaf4b9c-57d6-7004-2661-c95edeacab11
10/11/2013 14:36:24.43 w3wp.exe (0x1A70)                       0x1848
Project Server                   Analysis Cube Building
8swo     Medium              PWA:http://<server-name>/sites/Walkthroughs, ServiceApp:Project Server Service Application,
User:PROJECTSERVER\system, PSI: [CBS] Status message: Cube build request message has been added to the Project Server queue,
LogLevelManager Warning-ulsID:0x3873776F has no entities explicitly specified.                afaf4b9c-57d6-7004-2661-c95edeacab11

Seems like an error occurred during site collection provisioning with the project server features. The provisioning process was interrupted from a system error and doesn't recovered after system restart.
I just created and provisioned a new site collection and everything is working now.
===== Initiating OLAP database build process =====
[10/16/2013 5:57 PM] Cube build request message has been added to the Project Server queue
===== Verifying and running pre-build server event handler =====
[10/16/2013 5:57 PM] Verifying and running pre-build server event handler
===== Determining database and OLAP database structure =====
[10/16/2013 5:57 PM] Cube build initialization started
===== Building database and cubes =====
[10/16/2013 5:57 PM] Cube build session started
===== Verifying and running post-build server event handler =====
[10/16/2013 5:58 PM] Verifying and running post-build server event handler
===== Processing OLAP database =====
[10/16/2013 5:58 PM] Process OLAP database session started
===== Verifying and running post-process server event handler =====
[10/16/2013 5:59 PM] Verifying and running post-process server event handler
===== Process Completed =====
[10/16/2013 5:59 PM] Cube build request completed successfully.

Standard cube for caluclaing taxations

Similar Messages

Maybe you are looking for