Standard customer field to FAGLGLEXT table

Hi,
I have included a standard coding block field COBL_WERKS (Plant - ZZWERKS) to the totals table. After I have added this as a customer scenario to the ledgers, I can see this field in the totals table. This is required as the classic PCA is able to provide this dimension.
When the accouting documents are generating from MM module in terms of Goods issue and Goods reciept, the plant info is flowing to the FI documents and updating the BSEG and FAGLFLEXT tables as well.
But when the accouting documents are creating upon the process order confirmations for the activities (material, labor), the plant info is not updating to the FI line items and totals table. Typically the additional FI documents are creating due to CO-FI real time integration and we have several substitions to derive the primary cost elements. At the same time, I am able to see the plant info in table COEP, 8A ledger etc. whereas this is not coming to the FI accounting document from CO module. (PP->CO->*FI*)
Is anybody have an idea why the customer field 'Plant' is missing for some of the processes generating from logistic modules.
Would really appreciate for your kind help.
Thanks & Regards,
Ramki
Edited by: Ramki on Dec 9, 2011 12:08 PM

Hi,
We have debugged the transaction and found that the BADi FAGL_COFI_ACCIT_MOD updating field 'Plant' COBL_WERKS whereas the accounting interface is not updating this field in BSEG_WERKS and FAGLFLEXT table.
Somehow we found that the connection between COBL and BSEG is missing for additional field 'WERKS'
Would really appreciate if anybody provide some useful info regarding.
Thanks,
Ramki
Edited by: Ramki on Dec 13, 2011 5:00 PM

Similar Messages

Custom field in BP_PDBGP table not getting updated

Hi,
i am working in Contract management in SRM 7.0 Pack 6. I have aadded a custom field in partner table which appears in the partner table of contract header. It is a checkbox. when i check it the value gets saved in BBPPDBGP table for the first time after that if i try to uncheck it the value is not getting updated. I checked in the BBP_DOC_CHANGE_BADI, the value which is getting passed is correct but it doesn't update the databse accordingly.
Any suggestions? is this a standard bug?
Neha

Hi Virendra,
Thanks a lot for your suggestion.
Where should i check? If the data passing to BBP_DOC_CHANGE_BADI is correct then that means at the webdynpro side there should not be any problem and as per the standard after doc_change also it should save properly. i also checked the badi there is not dependent coding done over there. DOC_SAVE badi is also inactive for contract business object. Hence, i am not getting any clue where could be the problem.
Let me know if you want more details inorder to analyse this problem.
Thanks &Regards,
Neha

Add a custom-field in the table MARC and manage it in MM01/MM02/MM03

Good day to all of you!
I have this task: To add a custom-field to the table MARC. This custom-field will be managed through the MM01/MM02/MM03 transaction as follows:
In the Basic Data 1 or Basic Data 2 the custom-field data will be added. Let's say the field is MATNR OBSOLETE.
I have searched and implemented the things in customizing: Made a copy of function group MGD1, added the field on the screen.
MY PROBLEM! How to manage it??? When the user enters MM01/MM02/MM03 and update this field, the field should be updated in MARC.
1. I am not sure that this custom-field should be on Basic Data1 or Basic Data2.They want it at plant level.
2. How to manage the data transfer from SAP Standard Program and my Custom Function Group.
PLs: Do not paste me link to sap technical site with that example, because there takes the custom fields and UPDATE a CUSTOM TABLE. I need to update MARC!
All the documentations i have read until now tell you how to add the field, ONLY the first part of the SOLUTION.
Any help, pls?
Good day and thank you!

Hi Alex,
In which way you are trying to update that custom filed. Have you written any logic in EXITS/BADIS?
http://pavelgk.pbworks.com/f/6729224-Implement-Screen-Exit-for-MM01-Adding-New-Fields-in-Screen.pdf
and
Just read the OSS note mentioned earlier.
Symptom
You want to integrate customer-specific fields in material master maintenance.
Other terms
SAPLMGMM, RMDATIND, ALE, CI_MMH1, EXIT_SAPLMGMU_001
Solution
To add customer-specific fields to an existing material master table (such as MARA or MARC) , you can proceed as follows as of Release 3.0C:
      1. Use an append structure to add the fields to the required table in the Dictionary (this is not a modification; for details, see the SAP document "ABAP/4 Dictionary"). In Release 3.x, the length of the field names must be the same as the standard five character fields. This is necessary because of dynamic assignments. As of Release 4.0A, the lengths of the field names can be longer than five characters. If the changes of the fields should be recorded in the change document and taken into account during ALE distribution, set the 'Change document-relevant' indicator for the corresponding data elements. For table MARA in Release 3.x, you must also enhance the database view MARU because the database changes are carried out using this view. This small modification is no longer necessary as of Release 4.0A because the database view MARU is enhanced automatically when you enhance table MARA or the include EMARA (which is the data part of table MARA).
      2. Enhancing online maintenance in customized material master maintenance:
      Define a subscreen with your customer-specific fields in a customer-specific function group created as a copy of the standard function group MGD1.
      In Customizing, assign this subscreen to a maintenance screen using the "Copy customized material master" function. For details, see the Implementation Guide (IMG). As of Release 4.0A, program COPYMGD1 is available. You can use this program to create customer-specific function groups as required. This program is also incorporated in the Customizing function 'Configure customized material master'. Ensure that each field of the subscreen has a field statement in the flow logic, otherwise the data is not transported correctly. You can use subscreen SAPLMGD1 2002 as an example.
      If you want these fields to be subject to standard field selection, you must add new entries for them to the central field table for material master maintenance (T130F):
      Application examples for standard field selection:
      The field is mandatory and is to be flagged with a "?".
      The field belongs exclusively to the purchasing user department. Purchasing data and MRP data are both contained on one screen. However, the MRP controller is not to see the purchasing data.
      The following data is required for each field:
            a) Field name        (T130F-FNAME)
            b) Field selection group (T130F-FGRUP)
            Here, you should use a standard field group if the customer field is subject to the same field selection as the standard fields of the standard field group. If it is not, use a customer-specific field group.
            You must then check and, if necessary, modify the attribute of the field group using the function "Maintain field selection for data screens" in Customizing under "Logistics Basic Data -> Material Master".
            Field groups 111 through 120 that are not used in the standard system are reserved as customer-specific field groups. As of Release 3.0F, additional customer field groups are available. (For details, see the IMG).
            c) Maintenance status (T130F-PSTAT)
            List of the user departments that may maintain the field. You can display possible values by using the input help for the maintenance status field in the Customizing activity "Configure Material Master" when maintaining logical screens.
            d) Reference        (T130F-KZREF)
            This indicator must be set if the field from the reference material should be proposed during creation with reference.
Note: You cannot yet use Customizing to enhance table T130F; you can use only transaction SE16 (Data Browser) or transaction SM31. Future releases will include a separate Customizing function for maintaining customer-specific fields. See Note 306966. By implementing this note you can add entries to table T130F within Customizing. This type of maintenance is possible as of Release 4.5B.
You may change the entries for standard fields only with regard to the reference data and field selection group. Changing other data for standard fields constitutes a modification. Therefore, you cannot use the Customizing function "Assign Fields to Field Groups" to change this data.
In addition, you must not add new standard fields to table T130F.
      3. If you want to maintain customer-specific fields using data transfer by direct input or via ALE distribution, proceed as follows:
      Add the fields to central field table T130F (see above).
      Add the customer-specific fields to the data structures for the data transfer (for example, BMMH1 for the main data).
      Also, add the customer-specific fields to the tables in which the incorrect data is stored during direct input. These tables have the same name as the corresponding master data table and also have the suffix _TMP.
      For example: If you add customer-specific fields to table MARA, you should add the same fields to table MARA_TMP.
      If you use ALE, you must also add fields to the IDoc. To process enhanced IDocs, you can use enhancement MGV00001 with customer exit EXIT_SAPLMV01_002 for creating the IDocs and customer exit EXIT_SAPLMV02_002 for posting the IDocs.
      Prior to Release 3.0E, enhancing structure BMMH1 constitutes a modification. In this case, you must add the new fields tot the end of the structure before the last field (SENDE = record end indicator).
      As of Release 3.0F, structure BMMH1 contains the customer include CI_MMH1, which is part of the enhancement MGA0001. Here, you must proceed as follows:
            a) Add the customer-specific fields to include CI_MMH1.
            The names of the fields in CI_MMH1 must be identical to those of the corresponding fields in material master tables MARA, MARC and so on.
            Important: The fields must be CHAR type fields. Therefore, create CHAR type data elements whose lengths are identical to the output length of your fields in table MARA and so on. Use these data elements in include CI_MMH1, but use the field names from table MARA and so on.
            b) Activate include CI_MMH1.
            c) If you have not used customer structure ZMMH1 before, create it as a copy of structure BMMH1 and delete the standard fields that you do not require. You are not permitted to delete field STYPE and include CI_MMH1 when doing this. If you have already used structure ZMMH1, add include CI_MMH1 to it.
            d) Activate structure ZMMH1. This also adds the customer-specific fields to ZMMH1.
Run program RMDATING. This program generates routines which are supplied to your customer-specific fields from the input file. As of Release 4.5A, you also need to activate the routines/function modules generated by program RMDATING (especially, the MAT_MOVE_BMMH1_XXXX modules). Details about this subject (especially the procedure when using customer structure ZMMH1) are described in the IMG for transferring the material data under item 'Maintain Transfer Structure'. Also, check the declaration of structure WA in program RMMMBIMC to see whether it is declared with sufficient length. If necessary, enhance the declaration (for the time being, this still constitutes a minor modification).
In addition, lengthen domain DI_DATA with CHAR 5000. As of Release 3.1H, this has already been done.
Important: When using customer-specific fields, you can use only structure ZMMH1 to transfer the data. Otherwise, after the next SAP upgrade which contains new standard fields in structure BMMH1, the input files no longer match. If you want these new standard fields to be transferred, add them after your customer-specific fields (the order of the fields in structure ZMMH1 does not need to be the same as the order of the fields in BMMH1).
If you want foreign key dependencies or fixed domain values to be checked, or another check for a customer field, this is possible up to and including Release 3.0D only by modifying the corresponding check function modules. As of Release 3.0E, you can use function exit EXIT_SAPLMGMU_001 (SAP enhancement MGA00001) for these purposes.
If you want to use engineering change management to schedule future changes for your customer-specific fields or you want to use the 'Display at Key Date' function, execute program GENERATE in addition. This program generates the necessary assignments for interpreting the change documents. With regard to engineering change management, you must read Notes 60281, 60973, and 48962.
To date, it is not possible to integrate customer-specific tables in material master maintenance without making a modification. However, you can create customer-specific development objects containing the essential additional logic. You can then integrate these development objects in your system as part of only a minor modification.
check this link. It may helps you to solve your issue.
Thanks
Sravan

Add columns with custom fields in the table control of MIGO

Hi,
I have to add custom fields in the table control view of item in the MIGO. I have added the fields in the GOITEM structure and i am able to display it in the item details tab. I want the same fields to be visible as columns in the table control view of the items.
I found that TV_GOITEM is the control in SAPLMIGO program referring to the table control of items but it is referring only to the standard fields available in Screen 200.
Please let me know if there is any screen exit or option to add the custom fields in the control TV_GOITEM.
Thanks.

Hi,
Thanks for your reply. I have added the custom fields in the item detail. But the customer wants the custom fields in the table view also.
Is there any screen exit available to modify the table control of MIGO?
Thanks.

To Update Custom field in mch1 table through MIGO Tcode

Dear champs,
I have added one custom field in mch1 table ( date ).
Now , In MIGO Tcode when i am doing posting, MCH1 table is also updated.
I want to know how to update my custom field in mch1 table at the time of posting.
Please tell me where to write logic to update mch1 table.
Regards,
Satyen Trivedi

Hi Satyen,
what data has to be update in MCH1 table new field, for this did you added any screen or you want to implement your own custom logic.
1) if you implemented the screen , then you have to write logic there itself.
2) If you want to update through custom logic , then you takeup with the Enhancements or BADI.
Regards,
Krishna

Moving data from custom fields to ekko table

Hi Experts,
I added new custom tab into me21n,me22n,me23n header thro me_gui_po_cust and me_process_po_cust.
If i enter values in my custom fields, transport_from_model this method is not triggering.i have written below code in this method.
METHOD if_ex_me_gui_po_cust~transport_from_model.
DATA:     l_header TYPE REF TO if_purchase_order_mm,
            ls_mepoheader TYPE mepoheader,
            ls_customer TYPE ci_ekkodb.
CASE im_name.
    WHEN subscreen.
      mmpur_dynamic_cast l_header im_model.
      CHECK NOT l_header IS INITIAL.
      ls_mepoheader = l_header->get_data( ).
      CALL FUNCTION 'ZMM_GET_DATA'
        EXPORTING
          im_ebeln       = ls_mepoheader-ebeln
*            im_ebelp       = ls_mepoheader-ebelp
       IMPORTING
         ex_data        = ls_customer .
      MOVE-CORRESPONDING ls_mepoheader TO dynp_data_pbo.
      MOVE ls_customer-ztender TO dynp_data_pbo-ztender.
      MOVE ls_customer-zemdapplicable TO dynp_data_pbo-zemdapplicable.
      MOVE ls_customer-zpbgapplicable TO dynp_data_pbo-zpbgapplicable.
      MOVE ls_customer-zemdamount TO dynp_data_pbo-zemdamount.
      MOVE ls_customer-zemdvalidity TO dynp_data_pbo-zemdvalidity.
    WHEN OTHERS.
ENDCASE.
ENDMETHOD.
i cant move my values entered in custom fields to ekko table.
please help if u know..
regards,
Kavitha
Edited by: Matt on Mar 23, 2011 10:55 AM added tags

Hi,
check this out.. !!
Import data from Excel to Oracle Database and
Added link From Ask Tom.. your requirement you would be satisfied.. I supppose.. !!
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:908428873069
- Pavan Kumar N

Custom fields in migo table control not updating

hi ,
This is to have your valuable suggestion , wrt , following issue..
In transaction MIGO , i have to add two fields uebto and untto in table control .
I am able to add them in table control, but some how not able to pick data for these fields .
error coming is :
" System error: Incorrect Customizing for field
ZZUEBTO".
if any face such type of issue , answer me .
Thanx,
jeet

Hi,
Thanks for your reply. I have added the custom fields in the item detail. But the customer wants the custom fields in the table view also.
Is there any screen exit available to modify the table control of MIGO?
Thanks.

Custom fields for FV50 table control

Hello,
The customer has a requirement to add 3 text fields to the table control in Transaction FV50. These fields are currently not available in the table control at all (I checked the Table settings Administrator). Further, no Screen/Transaction Variant has been implemented either to prevent these fields from being displayed. Which is why I'd like to find a way to add these custom fields to this table control. These fields are the text descrptions for the numeric fields Cost Center, Fund and Business Area.
I've read many posts on this forum regarding potential solutions including the link below which details the SAP std solution. Only problem is this approach adds these fields to the data dictionary tables underlying the screen. The customer says about 1 million records are being generated a month so they would rather not have all that extra data at the line item level.
Custom column for FB60
If anybody has done this sort of thing via a user exit I'd much appreciate your input.
Thanks,
Tarun

Hi Rob,
Yes, I checked IMG configuration and found that Txn OXK3 allows us to extend the underlying tables and customize the generic fields in the table control. However, the client has nearly 1 million postings to table BSEG each month and I'm guessing this approach will entail adding the custom fields to table BSEG, which won't work for them. I haven't actually tried this approach because the SAP documentation has some dire warnings about proceeding. But if you have any insight as to whether this can be achieved without extending BSEG (possibly just extend VBSEGS??) that would be very valuable.
Thanks,
Tarun

Sync non standard customer fields cProjects to PS by extending BAPI_BUS2054

Hello,
I am using the hierarchical accouting via PS and would like to synchronise some non standard customer fields from cProjects to PS. The fields for synchronisation are definded in structure BAPI_BUS2054_DETAIL. This is used in BADI DPR_FIN_GECCO_ATTR. There I am filling the ct_attributes to transfer the data.
My question is if it is possible to extend this structure in order to transfer own fields to PS?
Thx, Vanessa

thanks

FI substitutions for custom fields in BKPF table

Hi,
We are having trouble making the substitution work for the custom header fields in table BKPF.
We have tried straight substitutions, exits and populating the fields on the interface table ACCHD.
Nothing works. But the substitution for the custom fields in BSEG works.
We did activated these substitution rules.
Do we need to have blank instead of "X" in the GB01 table for the field BEXCLUDE ?
Did we miss any thing here or we cannot use substitutions for header custom fields ?
Thanks
Steve

Hi Dave,
Currently, In BKPF table we have entries as follows:
For BOOCLASS "008" we have BEXCLUDE as blank
where as for "015" we have BEXCLUDE as "X" .
Do we need to change this "X" to blank as well ? Also I do not see the custom fields in GB01 table, but I see them in BKPF table though.
We have already regenerated the rules by running RGUGBR00 program.
Thanks
Steve

How to update a custom field of MARC table using BAPI_MATERIAL_SAVEREPLICA

Hi,
I want to update a custom field (Appended field) of MARC table using BAPI_MATERIAL_SAVEREPLICA. Please help me in this issue. I cannot use BAPI_MATERIAL_SAVEDATA as this updated the MARC table record by record. I have to update bulk records at a time.
Thanks
Rahul.

Hi,
Use the Documentation given for struture in BAPI docuemntation...
For loading data into custom fields of MARC use the structure - BAPI_TE_MARC.
First, structures BAPI_TE_<NAME> (<NAME> = MARA, MARC, MARD, MBEW, MLGN, MLGT, MVKE, MARM, MAKT) and the appropriate check structures BAPI_TE_<NAME> (<NAME> = MARAX, for example) have to be extended by the customer to include the required fields. The structures that are delivered as standard only contain the relevant key fields. When new fields are added to this structure, you should ensure that a field has the same name as the field in the database table. Furthermore, the fields in the structures BAPI_TE_<NAME> can only be CHARACTER fields. Data element BAPIUPDATE is to be used for the fields in the check structure (exception to this: key fields.)
Parameters EXTENSIONIN and EXTENSIONINX are used for transferring data to the method. Field STRUCTURE contains the name of the structure (for example, BAPI_TE_MARA or BAPI_TE_MARAX). This names is used to identify the work area (for example, WA_BAPI_TE_MARA or WA_BAPI_TE_MARAX) to which the data is transferred. The remaining fields in parameters EXTENSIONIN or EXTENSIONINX contain data for the key fields (for example, the material number) and the data for customer-specific fields. The number of characters reserved in both parameters for the contents of the customer-specific fields must match the number of characters for the relevant field in the work area. If the number of required characters is less, the remaining characters are left blank. Only when all characters have been filled can the contact for an additional field be transferred. Bear in mind that only data for which an appropriate indicator has been set in the work area can be updated to the database.
Regards,
Bhargava

Saving customer fields to SAP table (EXIT_SAPMM06E_012)

Hi All,
I would like to ask you guys a bit of a help with a user exit that I am working on as of the moment.
I am coding a user exit for a service purchase order (ekpo-knttp = 'K' and ekpo-pstyp = 'D') this is a service purchase order of cost centre category.
Since SAP does not allow the goods recipient (ekkn-wempf) to be modified for reasons specified in SAP Note 118008. I have used user exit MM06E005 FMs EXIT_SAPMM06E_017, EXIT_SAPMM06E_016 to the data in PBO and PAI for the transaction.
Now I tried using the two FMs EXIT_SAPMM06E_018 and EXIT_SAPMM06E_012 to pass this value to the table but it does not seem to get saved in table EKKN.
Using FM EXIT_SAPMM06E_018 the I have maintained the structure CI_EKPODB to include WEMPF and after debugging passing that user exit area the wempf is being tranfered to global data but this does not get saved in EKKN table (EKKN-WEMPF).
Although this is outside of the standard best practice of SAP since the account assingment belongs to the limits or the service line for service order but maintaining this recipient field for the PO item does not impact our system processes as the business acknolwedges goods recipient for service PO.
BADI ME_PROCESS_PO_CUST has also been implemented under method PROCESS_ACCOUNT invoking the interface IF_PURCHASE_ORDER_ACCOUNT_MM but unsucessful in the operation.
If anyone of you guys has encoutered same scenario or implementation requirement please do give information on this or work-arounds are well appreciated as well.
Cheers,
Erwin

Hi,
We have worked on a similar requirement ,just check if its useful to you.
Requirement:
                     You have to add the custom field in SAP standard table EKKO. Then we have to place the field in ME21N screen. When user enters any input into the field it should get updated in the database.
Note:
                     EKKO table is meant for Purchasing document header, you should add the field in the header level for ME21n screen. There you are provided with customer sub screens where you can add the field in the screen.
Procedure:
1You have to create a field in the Custom Include of standard table, after creating activate it.
2.Double click on the include then you can add your custom field here.
Find out the Required Enhancements:
1.Go to SMOD. Press F4 in the Enhancement field. In the next popup window, click pushbutton u2018Information systemu2019.
2.Then mention the particular package name of the transaction you need to      enhance. Then you will be shown the list of Enhancement components for that particular package.
3.Note down the enhancements. Then, come to the initial screen of SMOD and view the documentation of each enhancement to find out which one is required for your development.
MM06E005 is the Enhancement component we are using here.
Development
Creating a Project to include the enhancement:
1.Go to transaction CMOD and create a project.
2.Enter a description for the project.
3.Then, click on the pushbutton u2018Enhancement Assignmentsu2019 in the Application Toolbar.
4.Click on the components in Application Toolbar.
5.Here you will be shown the function module exits, screen exits and Include tables.
6.Click on the custom screen SAPLXMO6 u2013 0101 in which it suits the requirement of adding the custom field to the layout
7.Click on layout and go to get from dictionary and select the field you need to add and click ok.
8.Place the field in the layout and activate it.
9.After that you come back and check the respective function module in which you need to implement the code. So, we need to import the data from sub screen for purchasing document header. Therefore we have chosen the EXIT_SAPMM06E_008.
10. Write code in the Function Exits to synchronize the programs:
                   Now, code has to be written in the function modules EXIT_SAPMM06E_008 so that data flows to and fro between the main SAP program and custom sub screen program. Double clicking on the exit we get the following screen.
11. Double click on the include and write the required code inside it. Then activate it.
TABLES:EKKOIF NOT EKKO_ZADD IS INITIAL.
MOVE EKKO-ZADD to e_ci_ekko-zadd.
move corresponding e_ci_ekko to ekko.
modiky ekko from ekko.
12. Now come back and activate the entire project.
13. Now go to ME21n transaction and create a purchase order by giving all the mandatory fields including custom field we have created. Here Test is the custom field we have created. After entering the data then press SAVE button, your data will be populated to the respective table.
14. Go to SE11 or SE16n, check whether the field got updated in the database or not in EKKO table.
Thanks,Surya Pydikondala.
      Finally it gets updated in the database.

Adding Custom Fields to FAGLFLEXP Table

Hello,
We have a requirement to update WBS Element for Planning related Data. So have added custom field(WBS Element) in structure CI_FAGLFLEX04.
The field is visible when I open FAGLFLEXP table, but when I post data The custom field (WBS Element) is not being updated. Could you please let me know the process to update this field?
Thank you in advance.

Hi.
The procedure isn't so simple. There are several posts on the subject SCN. I suggest research before you start developing.
Start here:
https://help.sap.com/saphelp_nw04s/helpdata/en/cf/21eb61446011d189700000e8322d00/content.htm
However, the most important is: a) Is it really necessary to change the standard? b) There could be a Z table containing the new information and referencing FAGLFLEXP? c) What is the transaction that will keep the data? It has Exit´s for what you need?
As Vadamalai said below,
Actually your approach may be wrong, first as an ABAPer should ask to functional team, which transaction and where to insert the fields, it could be header or item level(I am saying example)
Based on tcode, you need to enhance the table level as well as the screen exit/BADI we need to pass screen to internal programming structure. the structure type will be table type of FAGLFLEXP.
Regards.
Douglas

Custom field in Total table in NewGL

In NewGL - ECC6.0, what happens if add a new custom field but I don't insert it in Total table (FAGFLEXT)?
Let me know
Thanks

Hi all
But I think there's NO option to have additional fields only in FAGLFLEXA. At least no such option available using the standard tool - i.e. FAGL_GINS.
Please be aware of the data volume in FAGLFLEXT/A by adding new fields.
Br, Kyoko

Need to update custom fields in MSEG table using "BAPI_GOODSMVT_CREATE"

Hi All,
There is a requirement to update custom fields in table MSEG which are part of append structure. There is a option to update the custom fields using the one of the tables parameters "EXTENSIONIN". Anyone please advice how can I update the custom field thru EXTENSIONIN.
Thanks in advance.
cheers,
Vijay

see the help
http://help.sap.com/saphelp_nw04/helpdata/en/c3/4099948b8911d396b70004ac96334b/frameset.htm
Regards
Kiran Sure

Standard customer field to FAGLGLEXT table

Similar Messages

Maybe you are looking for