Standard Datasource for ECMCT and ECMCA:Consolidation

Hi,
Are there any Standard Datasources available for extractiong data from ECMCT and ECMCA(ECCS Tables).I am currently working in SAP ECC6.0.I could not find any Standard datasources.
Regards,
Samir

Hi,
I found th Datasource by Customizing it from SBIW. Bu tI am getting an erro when I load data through RSA3 for DataOSurce
3EC_CS_1A.
The erro message is as follows:
No consolidation frequency for cons group ASIAPAC.
Diagnosis
For consolidation group ASIAPAC in dimension ZG, no consolidation frequency has been specified for version 100.
Procedure
Maintain the consolidation frequency for consolidation group ASIAPAC.
Ha sanyone come across such issue. Do Provide your Inputs
Regards,
Samir

Similar Messages

Require Standard DataSources for Purchase Orders

Hi,
Please provide me the standard datasources for purchase orders to get the data updated automatically in a BI System.
I have to display report containing the purchase orders details of each day.
Regards
Sunil Kumar

Hi,
Following link will give you complete details of purchase order deports and data sources.
http://help.sap.com/saphelp_nw70/helpdata/en/df/cfb839f6a7a307e10000000a11402f/frameset.htm
Regards,
Vishnu

Standard Datasource for Payment & Proposal List (S_P99_41000099)

Hello,
Looking for standard datasource in SAP R/3 for Payment List and Proposal List.
The R/3 Query is S_P99_41000099. The fields for this query are coming from PAYR and REGUH tables.
If we have any standard datasource available, then we can use that otherwise i have to go for database view and
create a generic datasource on the view.
I have another issue too, basically i'm also working on Check register Query, and we have ECC 6 (Net-weaver 4) and the standard datasource for Check register is available from ECC 6 SP-3 onwards. Do we have any other alternative for this? Installed the BI content for BW objects as we have 0FIAP_C50 available. But wondering how to work on the back end datasource. In the check register query, we have all the fields coming from PAYR Table.
Please can someone please guide me on this?
Thanks
Vandana

Hi,
There is no standard datasource on PAYR table.
Check the below thread -
PAYR Table Data source
Regards,
Geeta

Standard DataSource For Excise Related Data

Hi,
Please tell me are there available any standard DataSources for Excise Related Data like Excise Invoice Header data (Table j_1iexchdr), Excise Invoice Item details (Table j_1iexcdtl), Excise Groups (Table j_1iexgrps), Excise Part II details (Table J_1IPART2) etc.
If those are available in ECC 6.0, then please provide the information or for this I need to develop generic datasource?
Regards,
Pradip Nikam

Hi,
There is no Standard DS for Excise.
I created the Generic Dss on those tables with delta enabled in my last project. And they are running successfully.
I created 2 DSs on the same table , one with delta enabled on Created date and another one with delta enabled on Changed date ( Wherever this field is there in the base table). And used Lower limit as 1 as safty delta so that I was able to do delta loads multiple times in a day.
Regards,
Anil Kumar Sharma .P

Is there standard report for planned and actual devlivery date?

Hi Guru,
Could you help me to find standard report to compare planned delivery date in PO and actual delivery date (GR Posting date)?
I wonder, Is there standard report for planned and actual delivery date?
or I have to create a customizing report.
Thank you very much.

hi
i dont think it is possible to see both in one pan so try to create some Z report
u try ME80fn here u have to change the views ,in del shedule view u can see the delivery dtae and in PO histry view u can see the posting date
regards
kunal

Where can we find the standard program for scripts and smartform for vl02

where can we find the standard program for scripts and smartform for vl02
regard,
anil

If it is a standard Script Output see that all config in NACE tcode was done correctly and in the Application document the output type was properly defined and attached to a medium, partner and all communication related things like printer name, when to print the output and number of messages etc are entered in the document
the go to the related application Tcode
(for sales order goto VA02 or VA03)
(delivery -VL02N or VL03N)
for Invoice VF02 or VF03
for PO -goto ME9F
enter doc number, Issue Output to -> screen/printer
then see the output
step 1 : copy the z layout into testing client thru SCC1.
step2 : go to se71 and check modified layout.
step3 : if it is under logistics.. go to TCODE "NACE".
u will see various applictions for each business process.
there u have configure ur related layout according to requirments,
for example u consider for Request fo Quatation..
there is APPLICATION called "EA"
click and enter into it. configure it with ur requirments, for help consult with ur functonal consaltant, and save it.
step 4 : goto tcode ME9A for requst for quatation(RFQ).
step 5 : enter test data avalable and check it with message display.
it is same for other applications like Contract agreament --> ME9k
invoice --> vl02n
and goes on..
Reward points for useful Answers

Proceeding without standard costing for May08 and June08

Hi,
We have implemented Material Ledger here.
The backlogs are on.
We are still on May08 backlogs.
We had to proceed without standard costing for May and now also for June which we would be able to finish by July 20th.
After that we will be doing the standard costing run for July 2008 by 22nd July.
I dont think we neeed to calculate and settle variances for May and June 2008.
Please guide.
Could you please guide me on what precautions that need to be taken.
Also, when I do the actual costing (ML) run for July in August 2008, I think only the variances for July will be calculated and settled.
Any material Ledger experts, please advise and guide.
regards,
Nidhi

Hi Elaine,
Thanks a lot for your reply.
You are absolutely right.
The system will not allow me to close July in ML, unless I have closed May and June.
Also, the second option is completely ruled out. Every material has to be included in the ML run.
For carrying out ML closing activities for previous posting periods, the note no. 361236 would help. Please advise.
Also, Elaine, I am noticing that despite the fact that we did not do the standard costing run for May 2008, the system is using the standard cost estimate of April 2008 to calculate all variances.
I checked the costs analysis of all process orders and the system is correctly calculating the variances for all process orders.
So please suggest if the steps I am mentioning below are correct:
May 2008:
I will first calculate production variance using T code KKS1
Then settle the production variance using: CO88
Then I will carry out ML run for May using: CKMLCP
May closes in Material Ledger
June 2008:
I will first calculate production variance using T code KKS1
Then settle the production varinace using: CO88
Then I will carry out ML run for June using: CKMLCP
June closes in Material Ledger
Then I will do the standard costing run for July 2008.
(Also please note that we closed May and opened June in MM using MMPV, because one region is still in May backlogs while the other has started June backlogs. So the current period in MM is June and previous period is May 2008. This I guess should not have any impact on the ML run for May 2008)
Please guide me with possible reconstruction of steps.
Thanks a lot & regards,
Nidhi

Standard Datasource for Purchase Order master data

Hi Experts,
Is there any Standard datasource for extracting attribute information for Purchase Orders. Some master data datasources.
Iam particularly after the name of the person who released the PO.
Thanks,
DV

Hi,
These are standard Master Data Datasources
    0CRIT_MAIN_TEXT                   Key for Appraisal Criterion
    0CRIT_SUB_TEXT                    Subcriterion
    0CRIT_TYP_TEXT                    Scoring Method
    0DCINDIC_TEXT                     Debit/Credit Indicator
    0DISMM_ATTR                       MRP Type
    0DISMM_TEXT                       MRP Type
    0INDSPECSTK_TEXT                  Text Indicator Special Stock Valuation
    0INFO_REC_ATTR                    Number of Purchasing Info Record
    0INFO_REC_TEXT                    Number of Purchasing Info Record
    0INFO_TYPE_TEXT                   Purchasing info record category
    0MATL_CAT_TEXT                    Material Type
    0MATL_GROUP_TEXT                  Material Group
    0MAT_TYPE_VA_ATTR                 Control of Quantity/Value Update
    0MAT_VEND_ATTR                    Material Number Compounded to vendor
    0MRP_CONTRL_TEXT                  MRP controller
    0PRICE_CTRL_TEXT                  Price control indicator
    0PRICE_TYPE_TEXT                  Price type
    0PURCH_ORG_TEXT                   Purchasing Organization
    0PUR_GROUP_TEXT                   Purchasing Group
    0PUR_REASON_TEXT                  Reason for ordering
    0SERVICE_ATTR                     Service Master (Attributes)
    0SERVICE_TEXT                     Service number
    0STOCKCAT_TEXT                    Stock Category
    0STOCKTYPE_TEXT                   Text for Stock Characteristic
    0STOR_LOC_TEXT                    Storage Location
    0STRGE_SECT_TEXT                  Storage section for stock removal, placemen
    0STRGE_TYPE_TEXT                  Storage Type
    0STRGE_UNIT_TEXT                  Storage unit type
    0VENDOR_ATTR                      Vendor Number
    0VENDOR_LKLS_HIER                 Vendor number
    0VENDOR_TEXT                      Vendor Number
    0WHSE_NUM_TEXT                    Warehouse number / warehouse complex
    0WM_MVT_TYP_TEXT                  Movement type for Warehouse Management
Regards,
Marasa.

Standard datasource for Invoice master data

Hi ,
Can anybody please tell me , Is there any standard datasource for Invoice masterdata.
Right now in my company there are using 0FI_AP_4 datasource as an Invoice masterdata.
This Invoice masterdata is getting data from 0FI_AP_4 datasource.
But I have a requirement like I need to enhance this 0FI_AP_4 with other tables (PAYR,REUGH).
Is there any simple way to follow.Please help me.
Thanks in advance.
Pints will be rewarded.
Vamsi.

Resolved

DataSource for FAGLFLEXT and BSEG, or New Table in ECC6?

need to create an extractor to have all the information of FAGLFLEXT, because we need to keep the ledger information and the split of the information. However, we need to add 13 fields contained in BSEG.
Therefore we thought to reads the line items table FAGLFLEXA, and then enhace it throught BSEG table.
However, since we are using ECC6 and BI7. It is not support the creation of DataSources for FAGLFLEXA throught FAGLBW03.
Is it an option to incorporate all fields into FAGLFLEXT.
Can we creat a new table group based on FAGLFLEXT, and then adding the coding block extensions to that table -
how does new g/l and the new table group work in parallel? Which is the procedure to do it?
Documentation says we can create a new table group based on FAGLFLEXT --- its the how does it work in conjuction part...for example...the new g/l handles document splitting and one other thing georg referenced last night...will the split documents go into our new table group?
BSEG does not have the document splitter information that we need (it's incomplete data). It's missing profit centers on many items, it's missing the proper split of transactions.
Thanks for your comments.

Here is more information about this post.
Client situation: Our client is implementing ECC 6 and is using the "New-GL" features. Because of business requirements, the coding block has been extended (not insignificantly - 18 extra fields at the moment) to accommodate legal, regulatory and management reporting. The reporting solution includes standard ECC reporting (e.g. report writer, report painter reports) as well as feeds to BW (BI 7).
The Challenge: Our understanding is that adding all of the coding block extensions to the New-GL tables (ie. FAGLFLEXA and FAGLFLEXT) may lead to performance degradation in the ECC system. However, we still need to accommodate the requirement to report by the additional dimensions that are not currently included in the New-GL, so our challenge has been to find a solution that minimizes performance issues, while still allowing us to have all the necessary dimensions with which to do the required reporting.
What we would like to know: How have you handled this in similar situations?
Have you added to the New-GL tables? How many fields? Performance issues encountered?
Have you created additional table group(s) based on the New-GL and then modified that structure to have the new fields? How does the additional table group work co-incident with New-GL (e.g. does the additional table group receive document splitting information?)?
Have you created custom extractors for BW? On what basis (we understand that FAGFLEXA cannot be created as a datasource to feed BW)?

Standard Datasource for Excise related tables in R/3

Hi Experts,
    We are developing BI Reports for the Custom Reports in R/3 .
    In one of the ZReports in R/3 the data is coming from 12 tables.
    The data is coming from the tables EKBE,EKPO,EKKO,ADRC,MKPF,BKPF ,MAKT,
    J_1IPART1,J_1IPART2,J_1IEXCDTL,J_1IMOVEND,J_1IMTCHID.
    The tables J_1IPART1,J_1IPART2,J_1IEXCDTL,J_1IMOVEND,J_1IMTCHID are Excise Related.
    Please suggest me if any standard Datasource is available for these tables .
Regards,
Chakradhar

Hi,
There is no Standard DS for Excise.
I created the Generic Dss on those tables with delta enabled in my last project. And they are running successfully.
I created 2 DSs on the same table , one with delta enabled on Created date and another one with delta enabled on Changed date ( Wherever this field is there in the base table). And used Lower limit as 1 as safty delta so that I was able to do delta loads multiple times in a day.
Regards,
Anil Kumar Sharma .P

How to update standard lookup for name_prefix and name_suffix

We're using Fusion HCM 8.
Just at the beginning of some General Setup, we have the need to to add addtional values for name_prefix and name_suiffix.
Name_prefix is empty, wehn getting it, in name_Suffix are 3 values.
We're using the Setup Option "Manage Common Setup" and there the lookup type HRX_DE_NAME_PREFIX (SUFFIX).
For both the green plus is grayed and the Standard list is more or less empty.
Best solution for us will be getting a complete list in the lookups with the common values.
Additional it will e very helpful having the Chance to add/correct values.
Do we need other security rights for our implementation use?
Or do we have to open a SR, while fighting with a bug.
Many thanks for for all help

Both of these lookup types are of system lookup types and you can't add any value there. Moreover, both of these lookup types are for Germany and should not be used for any other country requirement. However, I can see one issue there in HRX_DE_NAME_PREFIX being a system lookup type and not having even one value there. You can open SR for that.
BTW, where do you want to use these lookups? If you have any specific requirement, you can consider creating your own lookup.

Standard BAPI for PO and PREQ Rejection

Hi All,
Do we have a standard BAPI for PO Rejection and Purchase Requisition Rejection?
Regards,
Murtuza

The standard process is that you should configure the sales order as Third party sales order (or Inter company SO-PO process whatever is the requirement here) then Purchase requisition will be created automatically when the sales order is saved. You can then create PO with reference to the Pur.req. The item category TAS is configured in standard SAP for Third party / inter company processing requiring SO - PO process.
A PO in a third party/inter company SO-PO process is linked to SO through Purchase requisition and the linkage happens at item level because a single sales order can have both PO related items and items that are directly delivered and billed.
You can refer these links
how to configure third party order ?
http://sapsdforum.com/2007/10/23/third-party-order-processing/

Standard reports for cash and fundflow reports?

Hi,
i need a requirement to maintain reports for cash and funds flow statements?Actually relevant to these reports i use to maintain customize only but coming to fundflow and cash flow there is much complications to do that.
so is there any standard reports to maintain fundflow and cash flow reports which is relevant to FI-CO
Thanks in Advance
vass

Hi
You have Cash flow statement based on 0FIGL_VC1
http://help.sap.com/saphelp_nw70/helpdata/EN/7d/6cfa40ee14f26fe10000000a1550b0/frameset.htm
You also have Cash flow statement based on 0BCS_C10, but not sure it does suits to your requirement.
http://help.sap.com/saphelp_nw70/helpdata/EN/39/09503e50a9054be10000000a114084/frameset.htm
Hope it helps

SAP standard datasource for IDEX stream in SAP BI

HI
We are implementing SAP ISU retail project.Is there any Sap Standard datasource or Data Extractor for IDEX ?
THanks
DLK

Hi,
I don't see any Sap Standard datasource or Data Extractor for IDEX.
But may be documentation will be usefull:
Please, Refer to those links:
Intercompany Data Exchange u2013 Extended (SAP IS-U/IDEX)
http://help.sap.com/saphelp_rc10/helpdata/en/ef/7995d87d4a4fc3a064b440b7955444/content.htm
Intercompany Data Exchange
http://help.sap.com/saphelp_rc10/helpdata/en/f0/7ce4382763855ee10000000a114084/frameset.htm
All the best.
Best Regards,
Amine

Standard Datasource for ECMCT and ECMCA:Consolidation

Similar Messages

Maybe you are looking for