Standard Hours Required on a Work Center for a month along with CC

HI Gurus,
My requirement is :
I need a report which fetches how many hours are required in a month on a particular cost center attached to work center for a plant.
Is there any standard report to fetch this . If no how can we develop a report. Which tables we need to combine in CO and PP.

Hi,
Check report S_ALR_8703611.
Regards.

Similar Messages

  • Tables to retrieve work center for target costs

    Dear all,
    currently i developing a report which requires me to display the work centers and their target and actual hours and costs. I tried using production order link tables but they only show work centers that are related to planned costs. May i know which tables can i refer to, in order to retrieve work centers that contribute to the target costs?
    Thanks and Regards
    YM

    I have a Report for - 'Equipment BOM' - IB03.
    Problem: How to find the 'Maintenance work Center ' For Equipment ? (IE03--> Organization > Responsibility> Main. W.Cntr)
    [ Note: For Client --> It's not necessary that each Equipment has Production Order, Few Equipments are taken only for Repair purpose, Equipment is there in table - EQUI,
    So - Not possible to fetch from AUFK, HIKO or any other order tables. ]
    EQUZ-GEWRK has the main work center. Pass the equipment number and valid-to date to get the main work center.
    Cheers
    Sujay

  • Error " No working/operating time maintained in work center for scheduling"

    Hello Friends,
    When i am scheduling the planned order than in scheduling log, system throwing the error "No working/operating time maintained in work center for scheduling".
    Message no. C7014
    But in workcenter, i have attached the grouping and in interval and shift for the available capacity 1, i have maintained the shifts.
    According i can see the capacity on that workcenter in CM01.
    Same error i am getting when i am scheduling the routing and check the scheduling log.
    Regards,
    Jitendra.

    Hi
    Have u checked , to maintain the time required to perform the activity in the work-center?
    please check, i think, we have to maintain for each activity type.
    regards,
    rasika

  • Procedure to change the standard value key of a work center

    Hi Gurus,
    What is the procedure to change the standard value key of a work center.
    Thanks in advance,
    Regards,
    PPQMUSER

    Hi,
    Just go to CR02 and change std value key, system will give you an information massage 'Standard value key : parameter XXXX after changed' as per the parameters used in new std value key.
    If you want to change the customization for allready used STD value key, then you need dealocate that key from workcenter, and then change the customization.
    Tara
    Edited by: tara  bhapkar on Feb 29, 2012 7:39 AM

  • To find 'Maintenance Work Center' for Equipment (without Production order)

    Hi,
    I have a Report for - 'Equipment BOM' - IB03.
    Problem: How to find the 'Maintenance work Center ' For Equipment ? (IE03--> Organization > Responsibility> Main. W.Cntr)
    [ Note: For Client -->  It's not necessary that each Equipment has Production Order, Few Equipments are taken only for Repair purpose, Equipment is there in table - EQUI,
    So - Not possible to fetch from AUFK, HIKO or any other order tables. ]

    I have a Report for - 'Equipment BOM' - IB03.
    Problem: How to find the 'Maintenance work Center ' For Equipment ? (IE03--> Organization > Responsibility> Main. W.Cntr)
    [ Note: For Client --> It's not necessary that each Equipment has Production Order, Few Equipments are taken only for Repair purpose, Equipment is there in table - EQUI,
    So - Not possible to fetch from AUFK, HIKO or any other order tables. ]
    EQUZ-GEWRK has the main work center. Pass the equipment number and valid-to date to get the main work center.
    Cheers
    Sujay

  • My daughter created a movie using iMovie, which she has worked on for a month, when trying to save it on a jump drive she was asked to "finalize" the movie...now there is no record of it at all. Any ideas how I could try and retrieve the file?

    My daughter created a movie using iMovie 11, which she has worked on for a month. When trying to save it on a jump drive she was asked to "finalize" the movie, and while this was running (quoted 13 hours!) she received an error message. Now there is no record of it at all, I have looked in trash etc. Any ideas how I could try and retrieve the file?

    The file cannot be reloaded in iMovie using File > Open Recent  ??
    There is no trace of the file in a Spotlight search?
    The project files are not under <user>/Movies/iMovie Projects ??
    Finalizing creates small, medium and large version of the finished video. It does take a long time, but it should not destroy your project files.
    Oh, and you really MUST have a backup of your files. You can expect to lose files if you have no other copies of them.

  • After working fine for several months, my iPhone 5 has started dropping bluetooth connectivity for 2 to 5 seconds at a time with my Sony MDR-1RBT headphones.  The headphones work fine with other devices.  I haven't moved to ios7 yet.  Any ideas?

    After working fine for several months, my iPhone 5 has started dropping bluetooth connectivity for 2 to 5 seconds at a time with my Sony MDR-1RBT headphones.  The headphones work fine with other bluetooth devices.  I haven't moved to iOS7 yet.  Any ideas?

    What user troubleshooting have you done on the phone? The steps are restart, reset, restore from backup, restore as new. Understand that a restore will put the latest iOS on your device. It is also possible there is a hardware fault on the device and the Bluetooth is failing. Anything is possible given the scenario you describe.
    And as far as iOS 7.x is concerned, we have 5 different iPhones here at home, all with the latest iOS, a 4, 4s, 5c, and 2-5s and all are working just fine. So, a blanket statement such as the one provided by the other poster is not completely true. Others are not having any issues at all either.

  • My ipod 4 when i plug it to my pc Windows 7 had worked fine for 8 months then one day i plug it in and a message came USB device not recognized, i tried reset network settings and nothing called apple they did not know any help out there TX

    My ipod 4 when i plug it to my pc Windows 7 had worked fine for 8 months then one day i plug it in and a message came USB device not recognized, i tried reset network settings and nothing i did not install any software before this happend i called apple they did not know, any help out there TX

    Start here:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

  • Acrobat XI does not open - licensed copy - has been working properly for several months

    acrobat XI does not open - licensed copy - has been working properly for several months. i never did have any problems before this. was acrobat 10 with acrobat XI upgrade in November 2013 so 6-7 months of trouble free use

    I too have the same problem working property until about January or February this year...get "bad parameter' message trying to open files and then when I did the upgrade this a.m. it will not open at all, just spins and then disappears.  I had this problem about a week ago and our IT man thought he had it resolved, even then kept getting 'bad parameter' and then this a.m. right back to not opening at all.  I have Windows 7 Professional v6.1 and am wondering if it's a compatibility issue?  Will I continue to have these issued until I install Windows 8?

  • The sliders in Lightroom worked fine for several months with my Sony NEX3N but now they have no effect. I can only edit photos by changing the histogram directly.

    The sliders in Lightroom worked fine for several months with my Sony NEX3N but now they have no effect. I can only edit photos by changing the histogram directly.

    The sliders in Lightroom worked fine for several months with my Sony NEX3N but now they have no effect. I can only edit photos by changing the histogram directly.

  • QIP7100 again showing activation failure (after having worked fine for a month)

    So - my newest control box (motorola QIP7100) is not working.  When I first got it it kept failing to activate and giving me the error message:  MoCATX Rate (84 Mbps) is low.  Verizon saw my message in the forum and were able to correct the issue remotely.  The set worked fine for a month, but now it is showing the same error again.  There were no changes to the TV or box, no power surges, nothing.  Does anyone know what I can do?
    Thanks

    Hello Romney68,
    I responded to the message you sent me. Let me know if this issue is still existing.
    Shamika_Vz
    Verizon Support
    Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or Plan.

  • I have an iPhone 4S. I'm using a Belkin tune-cast F8Z498 FM transmitter. Has worked fine for several months. Now I'm getting an "accessory not supported" message.  Any help out there?

    I have an iPhone 4S. I'm using a Belkin tune-cast F8Z498 FM transmitter. Has worked fine for several months. Now I'm getting an "accessory not supported" message.  Any help out there?

    people repport dirt in the connector can cause this
    guess a broken connector could too

  • HT1338 I have installed osx mountain lion, it worked great for past months but recently, my mac takes lots of time to startup and sometimes gets stuck.. what should i do??

    I have installed osx mountain lion, it worked great for past months but recently, my mac takes lots of time to startup and sometimes gets stuck.. what should i do??

    Repair Disk
    Steps 2 through 8
    http://support.apple.com/kb/PH5836
    System Preferences > Startup Disk
    Select your Startup Disk

  • Trying to find Function modul for requirement capacity in work center

    Hi Colleagues,
    I have tried to find a function modul: Import - Work center , Export - requirement capacity.
    but havn't succeed with.
    I will be glad for any help.
    tnx & best regards

    I need a FM that export the requirement capacity of a Work center.
    Report CM01 has the same functionallity, however, by debugging it I coudn't find any useful function, morever, I have found a thread in the forum with the same issue but it wasn't helpful.
    an example for my needs is as followed:
    Function: CAPACITY_REQUIREMENT_FOR_WORK_CENTER
    IMPORT:
                            1. Work Center = MG1602
                            2. Plant = 1000
                            3.date from = 01.04.2011
                            4. date to     = 01.05.2011
    EXPORT:
                            1. Capacity Requirment (Total) =  240 [Hours]
                            2. Capacity Requirment (period) = 22  [hours]

  • Actual hours done against a work order for a Work Center by non-maintenance

    Hi All,
    I have below question with respect to work center.
    -If there is this actual work hours done on a work order by non- maintenance personnel for a certain work center and same is not reflecting under operation tab of work order, then where & how this hours (done by non- maintenance personnel) for a work order is maintained for that work center?.
    -In which database table these hours done by non- maintenance personnel for a work order is stored by work center wise.?
    Thanks

    Have a look at the document flow button in the order header.
    The confirmation data resides in table AFRU
    PeteA

Maybe you are looking for

  • Pages doc losing images

    we have created two 90+ pages doc on our g5 twin - panther - and when we open them on the g4 powerbooks - tiger - many of the images are gone or corrupted. How can we prevent this from happening? Thank you. g4 powerbooks and g5 twin Mac OS X (10.4.7)

  • How can I back-up my hard drive when my MacBook won't power on?

    The other day my 2 year old MacBook Pro just turned off abruptly and has not powered on since. I took it to the Apple store today and they determined that it's more than likely a problem with the logic board since its not getting power at all and now

  • 11g_R2_DB_BLOCK_SIZE

    Hi All, We are importing 9i DB to 11gR2 DB as a part of Migration . Import successful into 11g DB , but i create this 11g DB with 4096 DB_BLOCK_SIZE, my doubt is does this 4096 block size affects the 11gr2 DB in future anyway. source(9i) also 4096 bl

  • Create a validation for check double invoice

    Hi, I have read here on SDN for check double invoice on reference number. We want to create an warning message if same reference number is posted twice, not depending on invoice date. So if I, on 1st of October have posted an invoice with reference n

  • Everything displays in Negative

    I just had a PowerPoint presentation crash my computer and, in trying to get out of it, I held down a few keys and hit a few keys at the same time (trying to emulate ctlaltdel - yes, I'm a new mac owner used to pc methods). Now everything is displaye