Standard IDOC/BAPI to create work order in CRM from ECC PS

Hello Guys,
Any input on any standard IDOC/BAPI I could use to create a work order in SAP CRM based on the data feed from SAP ECC (Project systems)?
Any help on this would be really appreciated.

Hii.
Did u get answer of SAP-> XI->CRM. IF so, share wid us.
I m stuck in same kinda scenario

Similar Messages

  • Create Work Order Using BAPI in LSMW

    Hi All,
    I searched in SCN but i dint get the correct idea to create Work Order USING BAPI,
    Im trying to create Work Order Using BAPI in LSWM
    Can any one Give me Brief Idea to create Work Order(Either Component or Operations) (t code - IW31) using BAPI in LSMW
    Regards
    Smitha

    Hi All,
    I searched in SCN but i dint get the correct idea to create Work Order USING BAPI,
    Im trying to create Work Order Using BAPI in LSWM
    Can any one Give me Brief Idea to create Work Order(Either Component or Operations) (t code - IW31) using BAPI in LSMW
    Regards
    Smitha

  • Error creating work order for new notification - Related SyncBO not present

    Hi,
    We are working with MAM3.0 standard application.
    We age getting an  error while creating work order for a NEW notification.
    In this scenario both notification and corresponding work order are also not created.
    Here is the error for MAM30001 Sync BO in MEREP_MONI:_
    Reading inbox record (mobile ID=0000001444, seq, no.=29, rcd_cntr=1, data=TOP0001000000
    External format successfully converted to internal format: ldata=TOP0001000000000000000
    Related SyncBO MAM30_010 with Sync key 0000000028 is not present on the device.
    Return code 1 (DOWNLOADER)                                                   
       Here is the error for MAM30010 Sync BO in MEREP_MONI:_
    Return code from RFC BAPI Wrapper call:Order NEW does not exist
    Return code from RFC BAPI Wrapper call:The order/network type  is not defined
    Return code from RFC BAPI Wrapper call:Order NEW does not exist
    Return code 0 (UPDATE MEREP_506-STATUS)                                      
    Can any body please tell me what is the sollutions for this error
    your help in this regard is appreciable.
    Regards,
    Murthy

    Hi Murthy,
    II have no idea what patch level you are on. A while back we had similar issues with some clients. There are several patches around that area available. Perhaps you should have a look into patch 959732.
    Hope that helps.
    Regards,
    Oliver

  • Need     RFC/BAPI    to create Delivery Order  with respect to  Sales Order

    Hi Gurus ,I'm   new  to  AB AP  Language   to be  working  in company
    so  can anyone  tel  me   FM/BAPI   to create  Delivery  order  with respect to  sales order(va01,vl01n)
    Any  sugg.. will appreciate  u.........
    Thanks in Advance...........

    Hi,
        Try this BAPI
    BAPI_SALESORDER_CONFIRMDELVRY
    Regards
    Bala Krishna

  • How can I make settlement rule mandatory in create work order (IW31)

    How can I make settlement rule mandatory in create workorder and saving without release.
    I kanow we can make settlement rule mandatory upon Release order but here requirement is
    Create work order (IW21) save without releasing that time settlement rule should default.

    Hi,
    1.If you want the settlement rule default then maintain account assignment data in technical object and when MO is created on that it would be copied into the settlement rule...
    2. If you want to make those fields mandatory .... plz check up field selections in config , if you cannot find those then use SHD0 Transaction variant to make those fields mandatory.
    3. Enter SHD0 , Enter IW31 in transaction and ZIW31 for transaction variant ..click create option and this takes you to IW31 initial screen , here enter required values of technical object etc and press enter and this gives you IW31 Initial scree screen variant , click continue and this takes you to inside screen and here enter required field values and on pressing enter gives you screen variant .. so you need to enter field values and check the flow of screen variants and on getting settlement rule screen variant select required option for the fields you need.
    4. Finally you can save that in package created in SE80 for transporting to other client .., you can activate the variant in SHD0 -->Standard variants -->you can find activate option ..
    regrds
    pushpa

  • What is the standard class used to create SALES ORDER in SAP CRM?

    Hello Experts,
    Can anyone suggest me what is the standard class used for creating sales order.
    I have created sales order using the BAPI 'BAPI_SLSTRANSACT_CREATEMULTI' in my report program.
    Now, I have to create sales order using standard classes and methods(my assignment).
    Please suggest the suitable class.
    Regards
    DNR Varma

    Hi Varma,
    You can create crm documents like sales order using BOL interfaces.
    You can check one example at the following thread:
    Create OrderThro BOL
    Check if it helps you a little more.
    Kind regards,
    Garcia

  • Create work order in 4.6C

    Hi guys,
    Have any of you seen any FMs for creating work orders in 4.6C?
    Thanks
    Mantas

    Hello Mantas,
    could you please check if the following BAPI can help fulfill your requirements.
    BAPI_ALM_ORDER_MAINTAIN
    I think that this what you are looking for.
    Regards,
    Isabelle

  • Error while creating Work Order

    Hello Experts,
    I am getting below error while creating work order via add-on named beas but the error seems to coming from SBO.
    Please advise.
    Thanks
    Deepak

    Hi,
    Plz check this thread:
    What does this error mean?

  • FM/BAPI to create Transfer Order(TO) with reference to TR or Material Doc.

    Hi,
    I am in need of Function module or BAPI to Create Transfer Order(TO) with reference to Transfer Requirement(TR) or Material Document.

    Hi,
    Please try any of the below,
    1.Look at function group L03B (Transfer order processing)
    2.Use L_TO_CREATE_TR
    3.BAPI_GOODSMVT_CREATE set:
    GOODSMVT_ITEM-STGE_TYPE_PC = destination storage type or GOODSMVT_ITEM-STGE_TYPE_ST = destination storage type
    4.Look at fm L_TB_VERAENDERN. This isn't RFC, but you might copy fm into ZL_TB_VERAENDERN and set RFC on.
    Hope this helps.
    Thanks,
    Harini

  • Create work order on 4.6C FM

    Hey guys,
    Just wondering if any of you have seen a function module for creating work orders in 4.6C?
    Thanks
    Mantas

    Hi,
    Do you mean PM work order?
    In that case BAPI_ALM_ORDER_MAINTAIN
    Regards

  • Is there BAPI to Create Repair Order / Coupons.

    Hi All,
        Can you let me know if there is any BAPI to create Repair Order and Coupon using BAPI.
    I have created Debit memo / Credit memo using BUS2096 / BUS2094 respectively. Now I want to create Repair Order and Coupon.
    Thanks in Adv.

    ALM_ME_ORDER_CREATE
    To post the order use
    CO_ZV_ORDER_POST
    Regards,
    Jai.

  • How to create Work Order in CMRO

    Dear All,
    We are new to using Oracle CMRO and because of unavailability of CMRO resources, we are facing quite a few problems while working on CMRO. Can anyone please help me out how can I create Work Order using CMRO.
    If anyone can provide me with Oracle CMRO White Papers, I will be very thankful.
    Regards,
    Zulfiqar Ali Mughal

    Hi,
    There are 3 ways to create work order in oracle cMRO.
    1) Through Maintenance Requirement and associated to visit and push to production.
    2) Non-routine.
    3) Unassociated Task.
    1.     Create Work Order From Maintenance Requirement:- In order create work order first of all we need to define an MR in Engineering > Fleet Maintenance Program > Overview > Create. After creating the MR Header at least one route should be associated (Route can be created from Engineering > Route >Overview > Create and the status should be "complete"). Then MR effectivity (means which item or unit MR is applicable) need to be defined and in turn the interval threshold also need to define. Once the MR is completed from the Planning window associate the MR to a visit and push to Production. In case of Planned MRs run the Build Unit Effectivities and view the due date from the Planning> Unit Maintenance Plan screen and associate to a Visit in Planning and push the visit to production. In case of Unplanned MRs create visit, associate unplanned MR, push to production.Work Orders would have generated and visible in Execution >Production Planning > Work Orders.
    2.     Create Non-Routine:- Non- Routines can be created from Execution and Planning
    a.Create Non-Routine work order from Execution:- Select the Routine work order and select Create Non-Routine work order from the pull down menu, furnish the details like severity, urgency, summary etc. and click on (B) Apply.
    b.Non-Routine from Planning: Create NR from Planning >Unit Maintenance Plan> Non-Routines (B)Create and then associate to a visit and push to production.
    3.     Unassociated Task:-This is for executing the miscellaneous operations to be done as part of already created visit. Navigate the visit task screen in an already created visit (Navigation: Planning > Visit Work Package > Overview > Search the visit > Click on the visit hyperlink> view visit task in side Menu), From the drop down menu select the “ Create Unassociated Task” and click (B) Go. Furnish the details in the Task header and click on (B) Apply and (B) Cancel, you would be navigate back to the “Visit Task” Screen. Select the unassociated task and push to production. Unassociated work orders would have created. You can create Unassociated task any time during the execution, before closing of visit.

  • Need FM or BAPI to create Notification Order (Like TCode IW34)

    Hi PLM Expert,
    Can you give hints to create Notification Order (Like TCode IW34) from FM or BAPI?
    Thanks in advance,
    Gilang

    Hello Raj and other experts, I need help creating a a maint order referencing notification. I am using method CREATETONOTIF to create Order refer notification. I am successful in creating order however bapi is creating two orders. One without reference to notification and second one with reference to notification. Please note i have to use create header object type and method 'Create' as well.
    If i get rid of first method below it_methods - Object id header & Method create so i only execute method called CREATETONOTIF , i get a error on "Enter another operation number" from bapi . Your help would be greatly appreciated. I am stuck on this error now.

  • Need Bapi to create maintenance order

    Hi All,
    I need a BAPI to create maintenance order in PM module.
    i checked before posting the i did not get suitable BAPI .
    please help...
    Thanks,
    Santhosh

    BAPI_ALM_ORDER_MAINTAIN

  • Standard IDoc / BAPI to get Employee Personal Details

    Hi All,
    Is there any Standard IDoc / BAPI to get Employee Personal Details like EMP-ID Name, Address in HR Modules.
    Bye
    Satish Reddy

    check with this: bapi_persdata_getdetailedlist

Maybe you are looking for

  • Time machine restarts instead of pausing when I stop backing up

    I am using time machine for the first time on my new imac 2012.  When I am doing something computer intensive like video editing, I want to pause the time machine.  It is on its first backup which will take 3 days.  Apple says that if you click stop

  • Blank black screen with just mouse pointer after logging in windows 8.1

    First of all On starting the system, it was taking much longer time than usual.. Then after logging in it showed only a blank black screen with white mouse pointer.. had to force shut down (shut down also took longer time).. on starting went to safe

  • How do I call a LabVIEW created DLL from within Microsoft Excel (VBA)?

    Hi, I'm trying to get Microsoft Excel 2003 to call a function stored in a dll that I created using LabVIEW 7.1.  The function is very simple and is called "binary_file_to_ascii".  Basically it just reads a LabVIEW created binary spreadsheet file and

  • Unit Test Framework Crashing LabVIEW Project

    [Cross posted to LAVA] OS: Windows 7 LabVIEW 2009, LabVIEW 2009 SP1.  Howdy If I create a project and add a VI and a unit test to it and save it, then delete the unit test, everything works. If I do the above but put the unit test in a virtual folder

  • Using Captcha within a .php file form

    Hello all - I need to add a captcha to an existing php form. The form is located in a .php file. I know this issue is not a Dreamweaver problem per se, but hoping someone here has had some experience with Captcha and .php files. when I add the follow