Standard info

is there any website where I can find info on recommended look and feel standards for developing webpages?
Thanks.

I am unable to get 9AMATNR, 9ALOCNO etc
Any solution how to activate these standard info objects? I already ran SE38 & executed /sapapo/ts_d_objects_copy.
But after running this program, system is giving "Message D0054" Writing error
Any solution to activate standard MPOS ie 9ASNPBAS & also 9AMATRN, 9ALOCNO etc??
Rgds,
Bhavesh

Similar Messages

How to find out the standard info stucture for a customized IS in LIS

Hi All
I have to run the statistical set up for the customized info structure S763 for the application plant maintenance in LIS. But i dont know whether it was copied from a standard SAP info structure or it was enhanced from a standard info structure.
I have even checked out all the standard IS for plant maintenance but it is not matching. The closest match is S063 but a few characteristics and a key figure is missing.
Could anybody guide me how to find out the standard info structure?
Any help would be of great help.
Regards
Saddy

Hi Ganesh
No..it didnt solve my problem. MC23 only displays the info structures. I have a customized info structure S763 which was created long time back. Im not sure whether it was copied from a standard info structure or enhanced from a standard info structure.
I have to give the source info structure name to run statistical set up. The closest one which matches with the S763 is S063 but it is missing few characteristics and key figure.
does it means that the IS S063 was enhanced?? Am i right?? If it was enhanced how will i run the statistical setup for the same...
I hope i have explained clearly.
Do provide ur valuable input.
Regards
Saddy

Custom field in standard info type data vanishes

Hi,
We have enhanced standard info type 9 & added a custom field.
in PAI defaulting some value to this custom field.
In PA30 when we make changes to existing records it defaults the valu in the custom field and when we save it it saves to data base.
After some time the value in this field vanishes.
Any idea on this?

Hi there
The screen of the infotype 0009 is separated in the standard screen and the customer subscreen. When the
bank country key is changed, then the current screen has to be refreshed: this is due as the displayed screen is dependent of the country key (eg 2000 for the international screen, as example 2006 for France, etc).
When we refresh the screen (technically a LEAVE SCREEN is done), the customer own fields are not yet passed from the screen layout to the screen logic as at the time of the refresh the customer PAI logic is not yet processed. Unfortunately this screen logic cannot be changed as this is a central place in the infotype 0009.
Hope this would help!
Kind regards
Sally

Custom fields of standard info types to be included in Info set query

Hi All,
I want to understand if the following scenario is entirely a fucntional config or ABAP efforts are also required.
A standard info type is already included in the Info set. But the (Z fields) in the Additional fields column of the IT are not visible in Info set for the respective info type.
I understand, with T-code SQ02 infotypes can be included in the existing info set, but not aware about the Z fields of a Standard Infotype.
Hence, please let me know, if there is any config which is required, so that they are reflected in Info set.
Thank you in Advance.
Regards
Simran

Make sure you have the infoset in edit mode.
if it is correct you see the addtional fields in the left half of the screen at the infotype.
Select the field group on the right half of the screen, go to the left half of the screen, select the field you want to add to the fieldgroup with right mouse click and select 'add field to fieldgroup'
good luck
Theo

Authorization with standard info objects

Hi Guys,
I want a small clarification.
Is it true that Authorization cannot be done for the Standard Infobject, we need to create reference objecs to the standard objects, and the master data of the standard object would be passed to the reference object
When i went to the standard object, this option is actually available for them too.
Thanks..
Regards,
Charu

Making Authorization relevant to the Standard Info-objects are not recommendable.
Make these standard info-objects as references and create info-objects with Z or Y.
you could see the bussiness explorer tab in the info object properties. There is one option called Authorization relevant.
you should enable the authorization relevant tab. Once it done then it will reflect while creating authorization object.
Hope this would help you in understanding.

Enhance Standard Info Structure SAP_CRM_ACT to add custom fields in CRM Activity archive Search

Hi All,
We have a requirement where we need to enhance CRM UI archive search with custom fields for CRM activity Object CRM_ACT_ON. As per my analysis Standard Archive Search for activity Uses info structure SAP_CRM_ACT for searching archived data.
But when we are trying to add custom fields into above field catalog, it is treated as modification. But Modification is not allowed in our landscape.
Standard infostructure is harcoded in SAP standard method ARCHIVING_READ of class CL_CRM_REPORT_ACC_DYNAMIC which is called as part of the process. So we are not able to go ahead with custom info structure.
Can you please le me know if there are any alternative way to meet above requirement or I have missed any steps.
Thanks & Regards,
Sujit

Hello Thomas,
Maybe this link can help.
add new field to search criteria and result.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0747ac2-ffd9-2910-de9a-8a3dc44da8b4?QuickLink=index&overridelayout=true&12966506314316
Search Options - Knowledge Management - SAP Library
regards,
Grace

Require relavant standard info objects

Dear experts,
PR Approval date
PR creation date
Transaction/event type, purchase order history,
PO Planned Delivery Date
Invoice Creation date
Invoice Clearing date
PO Issue date
Require to know any standard business content infoobjects available for the above fields?
If useful points would be assigned.
With Regards,
Meiyappan
Edited by: MEIYAPPAN SUNDARAM on Jul 7, 2008 3:04 PM

Hi,,
Copy your descriptions of ur Posted Info Objects to a file and hence import that to the Info object list in RSDIOBJ table,
Hence forth u vll get the field name as well as the Info Object Name
FRGDT- 0FRE_RELDT
BADAT0- 0DF_REQ_DAT
LFDAT-0SHIP_DATE
CPUDT-0CREATEDON
AUGDT-0CLEAR_DATE
Hope this will help you
Thanks
Raju

HowTo Transform an Standard-Info Cube to a rel-time InfoCube

Hallo everyone,
i read the manual:
http://help.sap.com/saphelp_nw2004s/helpdata/de/43/fd53821d702ae4e10000000a422035/frameset.htm
and trying´ to transform my copied standard InfoCube to a realTime Info Cube. But that doesn´t work. I deleted all data by Menu-> InfoCube-> Delete Data. The manual declines, the cube would change to inactive. But that's not the fact, the cube is still "active, executable".
What is the problem?

Christian,
The following link will provide you the required information:
http://help.sap.com/saphelp_nw2004s/helpdata/en/39/100c38e15711d4b2d90050da4c74dc/frameset.htm
The short answer is, you could use: SAP_CONVERT_NORMAL_TRANS ABAP report to convert the cubes from normal to transactional and transactional to normal.You could also update the field "Transact" to false by going to SE16, look for RSDCUBE table with field InfoCube, Infoarea.Pick the InfoCube that you want to convert in the change mode and update the field "Transact".
Hope this helps.
Cheers
Srini

Creating a Standard Info Record for multiple plants

We did some clean up in info records the other day and marked some old/incomplete info records for deletion down at the PO organizational data level (EINE). This went fine; however, now when we go to create another info record using the same info record number (because material and vendor is the same), but for a different plant (will be a separate entry in the EINE table), SAP automatically marks it for deletion because the previous entry is marked for deletion.
The one consistent thing I have noticed is that the old incomplete info record originally marked for deletion had a purchasing document attached to it. The document along with document date carried through the additional info records we tried to create for different plants.
Can someone tell me the reason this happens? Also, what can we do to prevent this? I would think you could have an info record marked for deletion in plant 1, and have a valid one for plant 2??

This is a program bug, please see OSS Note 742405 - Creating purchasing info record with deletion indicator

Where can I find Standard Info Object for 2LIS_06_INV

Hi
I have a requirement to find out the Standard Content objects for Block reason Qty,Price , Date Changed on,Blocking Reason Order PRice Qnty. Can any one let me know where I can find the 0Objects for this or do I need to create ZObjects ?
Thanks in advance

Hi,
Go to RSA1 and Go to Business Content Tab->In Object Type->Infoobject and Search there and transfer that and install.
or
TO RSA1 and Metadata Res
Search in Infobjects.
Regards,
San!

How to use standard infocubes and creation of customized info cubes

Hi Gurus,
1.How to see particular standard info cube suitable for reporting.
2. How to implement in dev. If standard info cube is not exactly suitable then what to do means can u make changes to standard info cube(I hope it wont possible)
3.how to create customized info cubes.
4.please send me the links with screen shots.
Regards,
razz

Hi Narasimha,
1.How to see particular standard info cube suitable for reporting.
If you have the name of the Infocube. Go to RSA1 transaction. Selecct Infoproviders in the left pane. Click on Find--> enter the cube name you want to search
Standard cube starts with 0(zero), whereas Customized cube starts with Z.
2. How to implement in dev. If standard info cube is not exactly suitable then what to do means can u make changes to standard info cube(I hope it wont possible)
I dont think you ca make changes to standard cubes. If you want to make any changes, copy the standard cube(If u right click on cube, we have a option of copy) & so the changes in the cusomized cube.
3.how to create customized info cubes.
Just goto RSA1-->select infoprovider in the left pane.
In the right pnae, rightclick-->create Infocube. Infocube is created!
Hope it helps!
Regards,
Pavan

Synchronize info record with standard & consignment type

Because SAP cost estimate can only adopt standard and sub-contract info record price, our end users ask us to maintain standard info record automatically by SAP when buyes maintain consignment info record. Is it possible to do it by IMG or any enhencements? Or someone has any better ideas for cost estmiate regarding consignment inf record?
Thanks a lot.

Dear Sarita,
I need link the informations, number info record with condition type and validity, in tables KONH I can take codition type and valid from / to, but I need link with specific info record, I not to get to see any to link form these information by tables KONH to do it.
Can I explain more details this process??
Thank you very much for your help.
Armando

Source List for Standard and Subcontracting Info Record

Dear Sir and Madam,
We have scenario where nart A could purchase with Standard PO or Subcontract PO.
We have following 2 Standard Info Record and 2 Subcontract Info Record.
Standard InfoRec 1 for Nart A to Vendor 001 --Fixed Vendor
Standard InfoRec 2 for Nart A to Vendor 002
Subcontract InfoRec 1 for nart A to Vendor 003 - Fixed Vendor
Subcontract InfoRec 2 for nart A to Vendor 004
We have the problem here, how can we set the fixed vendor in Source List, for Standard PO using vendor 001 and Subcon using Vendor 003?
Thank you very much,
Regards,
CW

In source list only one vendor can be assigned.
If u want to assign 2 or more vendor, try using Quota Arragement.
http://help.sap.com/erp2005_ehp_04/helpdata/EN/f4/7d267944af11d182b40000e829fbfe/frameset.htm
http://help.sap.com/erp2005_ehp_04/helpdata/EN/75/ee115f55c811d189900000e8322d00/frameset.htm

Transport error of request Standard Infocube to HANA Optimised Infocube migration

Hi ,
Migration of Standard info cube to Hana optimized info cube done successfully in Dev System,but while transporting that request in PRD system
error was coming and error log as follows-

Hi Herman,
Thanks for reply.Is there any SAP note or document for this steps?
My scenario system Landscape like BW DEV-BW PRD.
Our both BW System were on Oracle DB. We have migrated oracle DB to HANA DB .
PRD system infocube have 7 year of data and infocube is Standard Infocube.So we want to migrate all standard infocube to HANA optimized .
Regards,
Rajesh Behera

Error while loading heirarchy for a standard infoobject

HI,
When I try to run a infopackage for loading a hierarchy for a standard info object 0RPM_BUGU, I'm getting an error that states that there are no PSA tables for the selection criteria.
Both the communication and the transfer structure are active.
Kindly help me resolve the issue.
Thanks and Regards,
Sahana Narahalli

Sahana,
Usually Hierarchy datasources are iDOC datasources - try changing the same in your transfer rules and check
Arun

Standard info

Similar Messages

Maybe you are looking for