Standard job SLCA_LCK_SYNCHOWNERS is failing

This standard job has started to fail and I can't seem to find out the reason why.
In the spool of the job the only error (i think) is the line "No vendor specified", next line is Job cancelled after system exception ERROR_MESSAGE
I have check sm21 and ST22 and the errors aren't being reported.
I have read about you only need this job if it is a liveCache server, what is a liveCache server and how do I know if I have one.
The SAP we are using is SAP All in ONE SAP ECC 6.0
Thanks for the help

Hi,
the job is failling because the other job SAP_WP_CACHE_RELOAD_FULL is failling too, as this job is now obsolete, check the logs and dumps for detailed analysis.
Thanks,
Macherla

Similar Messages

How to deallocate the SLCA_LCK_SYNCHOWNERS standard job

Hi
how to deallocate the SLCA_LCK_SYNCHOWNERS standard job in solution manager.
We dont have Live cache.
Can any body give the solution for this problem
Regards
Rao.
Edited by: Rao on May 15, 2009 12:26 PM

you can delete any background job in sm37, just make sure that the job should not be in 'running' or 'ready' status. However, since this is a Standard background job, so it can be deleted via sm36 too as Markus already mentioned here
http://help.sap.com/saphelp_bw21c/helpdata/en/c4/3a7f87505211d189550000e829fbbd/frameset.htm

Standard job failing -- SAP_CCMS_MONI_BATCH_DP

Hi All,
I am running the standard job SAP_CCMS_MONI_BATCH_DP from last couple of years on my production system. I monitored from last 4 - 5 days the job is getting cancelled and providing a dump like ABAP/4 processor: CONVT_NO_NUMBER.
Sometime the job log says :
1. Logical system MSG_SSS is not configured in table /ISDFPS/ALE_SYS
    Job cancelled after system exception ERROR_MESSAGE
2. Logical system Startuptoo is not configured in table /ISDFPS/ALE_SYS
     Job cancelled after system exception ERROR_MESSAGE
Dump says :--
Runtime Errors         CONVT_NO_NUMBER
Exception              CX_SY_CONVERSION_NO_NUMBER
Date and Time          17.02.2009 13:16:59
Short text
     Unable to interpret "More than 100 " as a number.
Error analysis
     An exception occurred that is explained in detail below.
     The exception, which is assigned to class 'CX_SY_CONVERSION_NO_NUMBER', was n
      caught in
     procedure "RETRY_MECHANISM_SETUP" "(FORM)", nor was it propagated by a RAISIN
      clause.
     Since the caller of the procedure could not have anticipated that the
     exception would occur, the current program is terminated.
     The reason for the exception is:
     The program attempted to interpret the value "More than 100 " as a number, bu
     since the value contravenes the rules for correct number formats,
     this was not possible.
     There is probably an error in the program
     "SAPLSALSLD_MODEL".
Please advice ..

Hi Shashi
Yes!!!!!! definitely an ABAP Program error..
The source code may have been modified and has something as "more than 100" wrongly written in it. This could also be a case of variable settings as text is input in place of numbers or something like this.
An ABAPer could help you better in this one or the best possible solution definitely would be an OSS message to SAP.
Regards
Chen

Standard Job SAP_CCMS_MONI_BATCH_DP is cancelling

Hello All
I am facing problem with standard job SAP_CCMS_MONI_BATCH_DP...It is scheduled on hourly basis.
But on some days at some time it is failing with only one error message as
08/04/2011 17:52:26 Job started
08/04/2011 17:52:26 Step 001 started (program RSAL_BATCH_TOOL_DISPATCHING, variant , user ID
08/04/2011 17:52:29 You can only work in client 320
08/04/2011 17:52:29 Job cancelled
There is no specific time that it is failing.Please suggest me how can i resolve this?
Manmohan Soni

Hi,
Looks like the client in which job is to run, is different from which client the job is called from.
Check thread: Sm37 job problem
Also check sm21 log to get more details.
Regards,
Srikishan

Registering LOAD job with OEM fails

I tried to register a Mapping from a flat file to a table (SQL*Loader job) from OWB 9i (9.0.3) to OEM (9.2). This worked fine. However, the job failed to run because as the output states: the controlfile is not passed. And I can see that it is not among the job parameters.
How can it be that the standard job registering process does not include that essential parameter?
Is there a way to get a data load job properly defined in OEM?
Why is this job scheduled as a TCL job and not as a LOAD job?
thanks very much for any input!
Lucas

Lucas,
Your first issue is regarding the control file not being passed. In order to fix that you have to specify the control file in the mapping configuration. Beware that this control file is being read through utl_file, i.e. you will have to set the utl_file_dir in the init parameters of your database to the correct directory in order for the database to be able to read it. Basically, the control file is being read in order to fill the audit tables with the correct data.
Your second issue is regarding the type of job. As you may know OWB 'integrates' with Oracle Workflow (OWF) as well. The OWF solution also relies on the use of OEM for job execution. All of that is currently managed by Workflow Queue Listener. In order for Workflow Queue listener to be able to correctly handle the OEM jobs (defined as external functions in OWF) the job has to be defined as is. Besides, with the current way of registering the jobs all jobs (PL/SQL, ABAP or SQL Loader) are registered in the same way and directed by parameters.
Hope this helps,
Mark.

Job SLCA_LCK_SYNCHOWNERS getting cancelled

Hi Guyz,
We had job "SLCA_LCK_SYNCHOWNERS " getting cancelled everyday. Im not understanding what this job is doing. When i search in SAP Market Place this talks more as a job in MaxDB or some Live cache related. Could anybody tell me wht this job is doing , is it necessary in our BI system, our DB is Oracle 10g and OS in HP-UX.
Thank you

If this is not a LiveCache system, then you can just remove the job. This is scheduled by default in the SAP Standard Jobs area if you click the 'Default scheduling' button.
Hope that helps.
J. Haynes

Schedule Job for reprocessing failed BDOCs

Hello,
i heard there is a standard job which can be scheduled to reprocess failed BDOCs.
What´s the name of this Job?
Are you using this job? With what kind of experiences?
Thank you
Best regards
Manfred

RSMWAPP01 - Transaction SMW20 can be scheduled with a variant to re-process specific BDoc errors.

SAP Standard Jobs are getting canceled

Hi Basis Gurus,
In our Quality BW 3.5 system the SAP Standard jobs are getting canceled.
The jobs are as follows
SAP_APPLICATION_STAT_COLLECTOR
SAP_CCMS_CPH_HRCOLL
SAP_CCMS_MONI_BATCH_DP
SAP_COLLECTOR_FOR_JOBSTATISTIC
SAP_COLLECTOR_FOR_NONE_R3_STAT
SAP_COLLECTOR_FOR_PERFMONITOR
SAPCONNECT ALL SEND
SAP_REORG_ABAPDUMPS
SAP_REORG_SPOOL
SAP_RSICFDLT
In SM37 when i click on the job log for the above mentioned jobs the system is promting a message saying as "Error reading job log"
Please let me know how can troubleshoot it and resolve this issue.
Our is qulaity BW 3.5 system
Solaris OS
Oracle Database
Please help me.
Regards,
Anil.

Hi ,
For log display reason, try the note suggested. Jobs cancel reason may be due to that the user who schedule that job are locked or not exist on that client. Or other reason will be clear only after log display.
Ankit

Error saving job to database for standard jobs scheduling

Hi,
In IDES server when iam goto Tr.code -- SM36 -- Standard Jobs -- Default Scheduling iam getting below error.
Error saving job to database
Message no. BT117
Diagnosis
The SAP system was unable to save the current job in the database. This failure suggests that there is a problem with the database system or with the network connections between the SAP application servers and the database system.
System Response
Job not saved and not scheduled.
Procedure
To analyze this problem, start by checking the system log for messages about network or database problems. You can also use the computing center management system to check your system for problems.
Guide me for the same.
Thanku

HI,
Sometimes this error will come.
Try to schedule jobs manually using SM36 instead of using standard job button.
Also you can check this thread
Re: Error saving job SAP_REORG_JOBS to database
Which seems to report same problem.
Its nothing to take with database conenctivity as SAP is up and running .
Try this and revert.
Regards,

SSIS Job is getting failed with an error "0x00000005 : Failed to compiled scripts contained in the package.

Hi All. Could anyone resolve my issue.
I was created a package with an Script task written in VB.Net.
The Package was executing Successfully in BIDS.
But when i tried to exceute the same using Sql server Agent Job, Its getting Failed with the below error message
"Executed as user: Admin. Microsoft (R) SQL Server Execute Package Utility Version 11.0.2100.60 for 32-bit Copyright (C) Microsoft Corporation. All rights reserved.    Started: 5:12:27 PM Error: 2013-03-13 17:12:32.33
Code: 0x00000005     Source: Checking Alcon Files Checking Alcon Files     Description: Failed to compiled scripts contained in the package. Open the package in SSIS Designer and resolve the compilation errors.
End Error Error: 2013-03-13 17:12:32.33     Code: 0x00000005     Source: Checking Alcon Files Checking Alcon Files     Description: BC30179 - enum 'ScriptResults' and enum 'ScriptResults' conflict
in class 'ScriptMain'., ScriptMain.vb, 156, 22 End Error Error: 2013-03-13 17:12:32.36     Code: 0x00000005     Source: Checking Alcon Files Checking Alcon Files     Description: The binary
code for the script is not found. Please open the script in the designer by clicking Edit Script button and make sure it builds successfully. End Error Error: 2013-03-13 17:12:34.28     Code: 0x00000005
Source: Formating Excel Sheet Formating Excel Sheet     Description: Failed to compiled scripts contained in the package. Open the package in SSIS Designer and resolve the compilation errors. End Error Error: 2013-03-13 17:12:34.28
Code: 0x00000005     Source: Formating Excel Sheet Formating Excel Sheet     Description: BC30179 - enum 'ScriptResults' and enum 'ScriptResults' conflict in class 'ScriptMain'., ScriptMain.vb, 191, 22 End Error
Error: 2013-03-13 17:12:34.29     Code: 0x00000005     Source: Formating Excel Sheet Formating Excel Sheet     Description: The binary code for the script is not found. Please open the script in the
designer by clicking Edit Script button and make sure it builds successfully. End Error Error: 2013-03-13 17:12:51.56     Code: 0x00000004     Source: Checking Alcon Files      Description:
The binary code for the script is not found. Please open the script in the designer by clicking Edit Script button and make sure it builds successfully. End Error Error: 2013-03-13 17:12:51.56     Code: 0xC0024107
Source: Checking Alcon Files      Description: There were errors during task validation. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 5:12:27 PM Finished: 5:12:51 PM
Elapsed: 24.336 seconds. The package execution failed. The step failed."
Please give some solution to this.
Thanks in advance

Are you editing this job in SQL 2012? Is it wrapping your paths in \"? Like for example does the command line tab on the step look like this:
/FILE "\"D:\yourPathGoesHere.dtsx\"" /CONFIGFILE "\"D:\yourPathGoesHere.dtsConfig\"" /CHECKPOINTING OFF /REPORTING E
That's the problem I had, and I resolved it by recreating the whole thing via SQL Script and getting rid of all those \" things. I think that is preventing SSIS from looking up the precompiled binaries for your Script Task. So you should edit the command
line manually:
/FILE "D:\yourPathGoesHere.dtsx" /CONFIGFILE "D:\yourPathGoesHere.dtsConfig" /CHECKPOINTING OFF /REPORTING E
Please write back whether that helps you. David Dye's answer didn't help me at all.

Standard job scheduling problem

hi,
i am using ERP 6 ,windows 2003 , MS SQL 2005.
i am scheduling the standard job like (SAP_COLLECTOR_FOR_JOBSTATISTIC ).
in start time when i am selecting IMMEDIATE it is ok and working.
but in start time when i select particular date/time it gives error (Error saving job SAP_COLLECTOR_FOR_JOBSTATISTIC to
database)
can any one tell me why is this happing.

hi,
i am using ERP 6 ,windows 2003 , MS SQL 2005.
i am scheduling the standard job like (SAP_COLLECTOR_FOR_JOBSTATISTIC ) in sm36.
in start time when i am selecting IMMEDIATE it is ok and working.
but in start time when i select particular date/time it gives error :-
"Error saving job SAP_COLLECTOR_FOR_JOBSTATISTIC to
database"
can any one tell me why is this happing.

Standard Job Definition - What are these?

Can someone tell me what the following jobs are? Can't find any SAP documentation on these.
I see them in the BWCCMS, but can't find any information on them. Shouldn't these be documented if they are defined as standard jobs that should be run?
SAP_PROCESS_CUA_IDOCS_INB_000
SAP_REORG_SECURITY_LOG
SISM_COLL_AND_TRANS_DATA

Hello Kenneth,
all these jobs belong to SAP internal systems and should only be used by them (component XX-HST-OPR*). There's little information released for them, all for internal use of SAP only.
This is a summary of each one that can be made public:
job SAP_PROCESS_CUA_IDOCS_INB_000:
The job SAP_PROCESS_CUA_IDOCS_INB_000 executes the program RBDAPP01 (Inbound processing for Idocs ready for transfer) with an internal variant to perform the (Inbound Processing of CUA IDOC). This is a part of CUA (Central User Administration) configuration, but for Hosting Users/Systems only. The job is required to run in short periods to get the data from CUA server and must be run only in a specific SAP standard client and not in any customer client.
job SAP_REORG_SECURITY_LOG:
This job is a new job that hosting is deploying as part of security logging in a specific SAP standard client. It performs security/systems settings scans in SAP Hostings Systems for optimization and security purposes.
job SISM_COLL_AND_TRANS_DATA:
This job collects specific data for transaction SISM (SAP inhouse system manager), used to manage SAP Hosting systems.
I hope this information helps.
Best regards,
Tomas Black

SAP job SAP_COLLECTOR_FOR_PERFMONITOR getting failed with abap dump LOAD_PROGRAM_NOT_FOUND

Dear Experts,
Background job SAP_COLLECTOR_FOR_PERFMONITOR getting failed with abap dump LOAD_PROGRAM_NOT_FOUND.
As it is hourly scheduled job and it gets finished 22 times in a day but other 2 times fails with abap dump.
Finished Job log
Job started
Step 001 started (program RSCOLL00, variant , user ID Bharath)
Clean_Plan:Cleanup of DB13 Plannings
Clean_Plan:started by RSDBPREV                       on server
Clean_Plan:Cleaning up jobs of system DEV
Clean_Plan:finished
Job finished
Failed Job Log
Job started
Step 001 started (program RSCOLL00, variant , user ID Bharath)
Internal session terminated with a runtime error (see ST22).
Kindly suggest on this..
Thanks,
Bharath.

Dear Divyanshu,
Our system in ERP 6.0 EHP5 with SP level 10. The ABAP Dump shows below error.
|Short text                                                                                        |
|    Program "RSORA811" not found.                                                                 |
|What happened?                                                                                    |
|    There are several possibilities:                                                              |
|                                                                                                  |
|    Error in the ABAP Application Program                                                         |
|                                                                                                  |
|    The current ABAP program "RSCOLL00" had to be terminated because it has                       |
|    come across a statement that unfortunately cannot be executed.                                |
|    or                                                                                            |
|    Error in the SAP kernel.                                                                      |
|                                                                                                  |
|    The current ABAP "RSCOLL00" program had to be terminated because the                          |
|    ABAP processor detected an internal system error.                                             |
|What can you do?                                                                                  |
|    Note down which actions and inputs caused the error.                                          |
|                                                                                                  |
|                                                                                                  |
|    To process the problem further, contact you SAP system                                        |
|    administrator.                                                                                |
|                                                                                                  |
|    Using Transaction ST22 for ABAP Dump Analysis, you can look                                   |
|    at and manage termination messages, and you can also                                          |
|    keep them for a long time.                                                                    |
|Error analysis                                                                                    |
|    On account of a branch in the program                                                         |
|    (CALL FUNCTION/DIALOG, external PERFORM, SUBMIT)                                              |
|    or a transaction call, another ABAP/4 program                                                 |
|    is to be loaded, namely "RSORA811".                                                           |
|                                                                                                  |
|    However, program "RSORA811" does not exist in the library.                                    |
|                                                                                                  |
|    Possible reasons:                                                                             |
|    a) Wrong program name specified in an external PERFORM or                                     |
|       SUBMIT or, when defining a new transaction, a new                                          |
|       dialog module or a new function module.                                                    |
|    b) Transport error                                                                            |
|Information on where terminated                                                                   |
|    Termination occurred in the ABAP program "RSCOLL00" - in                                      |
|     "LOOP_AT_SYSTEMS_AND_REPORTS".                                                               |
|    The main program was "RSCOLL00 ".                                                             |
|                                                                                                  |
|    In the source code you have the termination point in line 535                                 |
|    of the (Include) program "RSCOLL00".                                                          |
|    The program "RSCOLL00" was started as a background job.                                       |
|    Job Name....... "SAP_COLLECTOR_FOR_PERFMONITOR"                                               |
|    Job Initiator.. " bharath"                                                                       |
|    Job Number..... 18243400
Kindly check and suggest..
Thanks,
Bharath.

Standard Job Search Is not working in Erecruitement

Hi
In Erec we have a Standard Job search Webdynpro Component HRRCF_C_SEARCH_UI Where we can search for the Jobposting based on Parameters like Functional Area, Corporate Title, Country, Location and Contract type,
When we search based on Country and Location only for few postings it will be unsuccessfull but without giving any search criteria we are able to get all the postings. This is happening only for few Posting remaining can be search on all the parameters,
We are searching for the Postings which are created earlier and the Background Job which runs the program RCF_PERIODICAL_SERVICES has been completed to in frequency of 30 minutes.
When i debug the code i see it searches in the Function Module HRRCF_MDL_SRCH_SEARCH and in that some SKWF_INDEX_COMBINED_SEARCH_XML with some query table ..
Is this some kind of TREX? I have no idea about this.
Please Help me out.
Thanks
Dipu

Your posting doesn't seem to be related to how to do something in Web Dynpro. This formum isn't intended for all questions about any application that might happen to be implemented in WDA. If your question is more about how the inner functionality of a business transaction works, there are other forums where you would have a higher chance of receiving a better response.

EMD_MAINTENANCE.EXECUTE_EM_DBMS_JOB_PROCS(); job status is failed

Hi all,
after I import dump fully database , the EMD_MAINTENANCE.EXECUTE_EM_DBMS_JOB_PROCS(); job status is failed,
what is the reason and how could I start it successfully.
appreciate your help.

user2075318 wrote:
Osama , thx for the updates,
but unfortunatly I don't have access to oracle support site,
it's grate if you can give me the 444033.1 document please.you need to have valid license to get oracle.support.com , otherwise i can't post anything here it will be illegal to do that

Standard job SLCA_LCK_SYNCHOWNERS is failing

Similar Messages

Maybe you are looking for