Standard Message Type Missing in XI!!!

Hi,
We have installed XI server and its working fine.
when we try to execute the Idoc scenario, in import parameter details, we have given only the XI Server details which we have installed.
When we try to import the IDOC ,the Standard IDOC's like CREMAS MATMAS ARTMAS DEBMAS are not shown.
i just want to know..
1)Is this standard Message type will be present only in R/3 system?
2) In case, if we want to configure for these standard message types, what are the steps to be followed in XI server?
waiting for the reply..
regards,
Sujata

hi shabarish,
yeah i know that we have to specify the SAP r/3 system.
In case if i give the details of XI server instead of SAP R/3 system details in import parameter details,is it possible to import the Standard IDOC's say MATMAS,CREMAS etc..??
this is my question..
regards
Sujata

Similar Messages

  • In which table cound i find the info on EDI standard Message type??

    Example
    EDI standard Message type Business process
    EDIFACT ORDERS Purchase order
                   INVOIC Invoice
    ANSI X12  850 Purchase order
                    810 Invoice
    Like those 850..810..etc info, i dont know from which table could i find the related info?
    Thanks.

    Hi Hoo,
    Electronic Data Interchange (or EDI) refers to the use of computers in formatting and exchanging business information using internationally recognized standards and formats. Standards organizations throughout the world have defined hundreds of document types to create a universal language for companies to conduct business while using dissimilar systems and processes. Common business documents, such as the invoice, purchase order, production planning schedule, ship manifest, and customs declaration, have been standardized and are sent and received electronically over private secure networks (Value-Added Networks - VANs) and the Internet.
    So EDI is not an SAP product, It is a method to exchange the data over internet.
    You dont get any information in any table in SAP. SAP supports EDI to exchange the data over internet. There are no. of third party EDI tools to connect to SAP.
    following is link to know more about EDI message types.
    http://www.edifactory.de/messages.php?s=D96A

  • Standard message type to transfer data for transportation planning

    Hi,
    We would like to develop a interface that would transfer the following data from SAP to another system (called Vista).
    "(Past) Receivings and requirements shall be considered in the transportation planning. Transfer the requirement information from the ERP system to Vista for the transportation planning."
    Is there any standard message type (or any other std solution) in SAP that can transfer this data from SAP to legacy system(Vista)?
    In general how does one identify for any given requirement, if there exists a standard message type (standard solution) of transffering data from or to an SAP system
    Thanks in advance.
    John

    Hi,
    U can go throught this sap help
    http://help.sap.com/saphelp_45b/helpdata/en/b5/9c48ebfc6f11d1bf5a0000e8a7386f/content.htm

  • Standard message type limitation on company code

    Hi all,
    currently I'm implementing ale distribution with the standard message type
    FIDCC1, i'm filling idocs in my source code and run function master_idoc_distribute
    now i need to set up a distribution model, but when i do so, the transactions to make
    documents complains that for certain company codes there is no global company code
    although those codes aren't used for the distribution. Is there a way/place where i
    can limit the use to certain company codes, without having to make global cc for
    all the companies in the system?
    or do i need something else then a distribution model to send the idocs?
    grtz,
    Koen

    you will get good answer if you post it in ABAP forum.

  • Standard Set Types Missing

    Hi,
    I have installed a CRM 7.0 System. I have observed that the standard set types starting COMM_* are missing. For example: COMM_PR_SHTEXT is missing. Due to this I am unable to create a service using t-code COMMPR01.
    The values do not exist in t-code COMM_ATTRSET as well as in the table COMC_SETTYPE.
    Please help.
    Thanks,
    Rinkal

    Hello Rinkal,
    I do not think you would be able to see setype COMM_PR_SHTEXT  in txn:COMM_ATTRSET.
    But you should be able to see this in table COMC_SETTYPE where FRGTYPE_ID = COMM_PR_SHTEXT.
    If this standard settype is missing which is not a normal case, then you can transport this settype from the system
    where this exists in your landscape.
    Hope this helps!
    Best Regards,
    Shanthala Kudva.

  • Standard Message type

    hi ,
           i am working on creation of Zshipment idoc , which resembles the same as shipment05 idoc  but i have added some zsegments in the custom idoc . My question is whether i can continue using the standard messge type or shall i create an Zmessage type  . kindly suggest
    regards

    Hi Gurunath,
    Just create an extension for your basic type SHPMNT05 in the tcode WE30 and just maintain that extension in the WE20 & WE82 transactions. Make sure that your process code populates the extra ZSEGMENTS which you have created. You can do this through some user exits available in the standard process code. After doing this when you generate the IDOC, you can see the Z segments in your IDOC.
    Refer the below blog on how to create the extension using WE30 transaction.
    /people/jiaxiang.huang/blog/2008/01/14/some-experience-on-idoc-enhancement
    ~Vaas
    Edited by: VaasPal on Jun 4, 2010 11:56 AM

  • Change pointer on reduced message (not standard-reducible message type)

    Hello all,
    I want to dedicate change pointers creation about classification.
    CLFMAS idoc is not reducible in the standard.
    With BD60, I modify the standard message type in order it to be reducible.
    I can have created a reduced message type ZCLFMAS and I have activated change pointers on it.
    When I modify a material classification, CLFMAS CP is created but not ZCLFMAS one.
    Do you have a idea about the missing configuration ???
    Thanks a lot

    Hi,
    >>>In this interface, we have to send only changed and newly created Employees to Legacy system. For this we are using change pointers which will capture all the changes.
    No standard idoc is available which can suffice our requiremen; so we have created a custom IDoc and enabled change pointers on it.
    what about HRMD_ABA ?
    standard idoc for sending employees from SAP ?
    everything is in standard with it
    Regards,
    Michal Krawczyk

  • PO invoice through IDOC --Need Standard Process code and Message Type

    Hi All,
    could any one send me SAP Standard Message type and SAP Standard process code for posting Vendor PO invoice.
    Thanks
    Raghu

    Hello,
    Standard Message type: INVOIC, Process Code: INVL, IDOC type INVOIC02.
    Thanks,
    Venu

  • Message type BOMMAT (change BOM)

    Hello Guru,
    I have some question and need help, when i try a standard transaction CS02, try to change a BOM material existing for example, the base quantity of the BOM was 650, i enter new data as 655, but suddenly retain the original Qty as 650 and save the changes as SAP will accept the changes i've done (BOM for material 2456 changed) but eventual i have not change any value to the original BOM. SO it mean this is standard SAP funtionality for CS02.
    But when we use an interface using message type BOMMAT a standard SAP message tpye, we have created an IDOC using this message type and same data as the original was maintain to it, to be more exact we plan to change a BOM thru this IDOC but all the data we have is the same value of the original BOM, so we expect no error could be encounter of this IDOC since in standard CS02, changing of BOM even same value was inidicated did not had error message encountered when saving.
    But thru our process, when we try to process the IDOC with message type BOMMAT in program RBDAPP01 (BD20) the idoc did not pass it when into status 51(Error when saving BOM. Please see the application log.) and when we check the BOM it has duplicate value upon executing the program we able to fix it when we delete the duplicate line segment in the IDOC and reprocess it once again.
    my question is why in standard message type BOMMAT had encountered error when processing when we try to make change of BOM even the same value is carried out by the IDOC, and why in standard CS02 saving a change of BOm with same value as it is SAP accept the process? Please help and clear the process.
    Any inputs R.Brahamankar and Vivek
    Thanks
    Edited by: Ryan on Feb 9, 2009 9:23 AM

    BOMMAT  and process code BOMM

  • Inbound Processing with reference to user defined Message type

    Respected Readers,
    I have created a segment with fields
    Matnr
    mbrsh
    mtart
    vpsta
    maktx
    meins
    matkl(Total 7 fields)
    I have created a idoc also and a message type and assign the idoc with message type.
    Now i have set the communication partners also and created the distribution model with my message type and distributed also to the reciver side.
    Now as it is not the standard message type like MATMAS so we cannot use the tcode BD10 to send the material.Instead of it i have to write the program to create the idoc for sending it.
    So i have created the program for the generation of IDOC.
    Upto here picture is clear.
    In the case of Inbound in standard we use the tcode BD11 to get material but same thing as we are not using the Standard Message type we have to create our program.
    Now in this case i have written a function module and that function module is attached to the process code and process code is attached to the message type and message type is attached to the partner profile.
    i have done the assignments in we57 and bd51 also.
    Now idoc is created in the inbound side with status 70.
    but i am not getting how to upload this data in standard tables Mara and Makt.
    So that if i go to tcode MM02 and give the respective Matnr ,it should display that material.
    First tell me what i have done is the right procedure or i have to make somechanges somewhere .
    Secondly if you please give me the function module code for inbound processing to upload the data in this standard table( mara ,makt)  so that material is created in the reciver side also.i will be very thankful to you.
    I am only using seven fields in creating the material.
    Please kindly send your answers and not links .
    Thanks

    i have done the same thing and used same parameter in import ,export ,tables and exception tab.
    i have written some code also .
    But i am not getting the code to upload the data in the standard tables so that material should be get created automatically as soon as the data get uploaded
    in tables.
    Somewhere i have read that you have to use the BDC concept Call transaction method to upload the data.
    But how to use the BDC code in  Function module , i am not getting.
    Please can you send any example of code for this task.

  • What's the difference between segment filtering and reduced message type

    Hi gurus,
    What's the difference between segment filtering and reduced message type? It seems they have the same functionality: Reduce the segment while idoc is generated.
    Thanks in advance.

    Hi,
    BD53 is for IDoc Reduction.
    this allows you to create a reduced message based upon a standard message type.If you want see mandatory fields. go to T-coe BD53 and give one standard messege type name and eg: matmas
    there mandatory fields will be in Green color..
    And BD56- This transaction is used to filter out segments of IDocs for combination of sender and receiver. This is usefull in scenarios where a standard IDoc with many segments is used but the receiving partner is only interested in some of the segments
    the table related to this transation is TBD20
      please go through below blog you have an idea abt that,
    http://wiki.sdn.sap.com/wiki/display/ABAP/ReducedMessageTypes
    http://saptotal.com/IDoc%20Segment%20Filtering.html
    regards,
    ganesh.

  • Changing a Message type on Purchase Order

    Hi guys,
    How can I change a standard message type on Purchase Order ?
    For example :
    On Purchase Order, when a insert a new Contract item number, occurs the Error message below :
    'Contract vendor 610065 differs from vendor 610195'
    But, I neet to change this message type from 'Error' to 'Warning' in some cases.
    How can I do this, please ? I'm learning OO now and I have some difficulty yet..
    tks
    Flavio

    I found a Method  'PROCESS_ITEM' in a Badi 'ME_PROCESS_PO_CUST' that the piece of code bellow.  I tried to insert the code :
    message e047(06) with '12345'.
    but... the message 47 didn't change, and this message only was added to messages.
      define mmpur_message.
        gl_tabix = sy-tabix.
        gl_subrc = sy-subrc.
        message id &2 type &1 number &3 with &4 &5 &6 &7 into gl_dummy.
        call method cl_message_mm=>create
          exporting
            im_msgid = &2
            im_msgty = &1
            im_msgno = &3
            im_msgv1 = sy-msgv1
            im_msgv2 = sy-msgv2
            im_msgv3 = sy-msgv3
            im_msgv4 = sy-msgv4
          exceptions
            failure  = 01
            dialog   = 02.
        if sy-subrc = 1 or sy-subrc = 2.
          message id sy-msgid type sy-msgty number sy-msgno
                  with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        endif.
        sy-subrc = gl_subrc.
        sy-tabix = gl_tabix.
      end-of-definition.

  • AS2 Module tab.. Mapping Names for modified Standard Msg types ? ? BIC ??

    HI All,
    Im using AS2 adapter for standard PO message type <b>orders.orders05</b>
    and i thought of using the seeburger standard mapping name  "<b>See_E2X_ORDERS_850</b>"  in AS2 Module tab.
    Now the problem is my client has extended the idoc to <b>orders.orders05./glb/orders</b> by adding few more fields in some of the segments.
    Since we have modified the standard message type and i dont think the standard mapping name will work for this ?? im i correct??
    If yes, i think we need to use BIC mapping tool and modify the standard xsd by importing and we need to create the new map ( ex:<b>map_E2X_Orders_Modified.xml</b>) ,generate the SDA file for this and we need to deploy SDA into XI.
    And finally if we use the modified mapping name in our AS2 module tab.I think it will work????
    Any suggestion or inputs we can approach in these kind of situations.
    Thank you.
    Regards
    Seema.

    Hi Chirag,
    Nice to see you back in action
    I will be doing the below steps in BIC.. and let me know if anything is wrong in this.
    i will Create the Project name as <b>" Project_Orders_Modified"</b> in BIC tool
    1) i will modify the std msg xsd in txt file and Under my project name i will import it under EDIFACT. Save it and i will export it and save it in folder as...
           <b> msg_DT_Orders.xml</b>
    2)i will create XML Message for this by giving
    <b>
    source : msg_DT_Orders.xml
    Target : msg_XML_DT_orders.xml</b>
    I will import it into My Project " Project_Orders_Modified"
    3) I will create the CreateMappingEDI to XML by giving
    <b>source : msg_DT_Orders.xml
    Target : map_E2X_DT_orders.xml</b>
    I will import it into My Project " Project_Orders_Modified"
    Then I will run the map.. and checks if it is working fine.
    If yes, i will import my mapping into Active mappings and i will generate SDA file and will deploy into XI .
    Finally i will use the mapping name " <b>map_E2X_DT_orders</b> " in AS2 Module tab.
    Let me know if anything wrong.
    -Seema.

  • Problems with PROOF field in idoc (message type HRMD_A)

    Hello,
    I'm using the standard message type HRMD_A with IDOC base type HRMD_A06 and the function module IDOC_INPUT_HRMD.
    I have a doubt with field 'PROOF' when I fill the IDOC. Does anybody know for what is it used? For example, what's going to happen if I put PROOF = 'X' in an update operation?
    In my case I have tested that when PROOF = 'X', I receive the following warning in intotype 0001:
        The EMPLOYEE_ORG_ASSIGNMENT-ADMINISTRATOR_GROUP field is not maintainable in dialog, so it is ignored
        The EMPLOYEE_ORG_ASSIGNMENT-ORG_UNIT field is not maintainable in dialog, so it is ignored
        The EMPLOYEE_ORG_ASSIGNMENT-COSTCENTER field is not maintainable in dialog, so it is ignored
    but I cannot be sure if these warnings are due to PROFF.
    In the change data record screen, I have filled the following fields: plan version ('01'), object type ('P'), object id (employee number), PROOF ('X'), Operation ('U'). Structure for the idoc is EDIDC->E1PLOGI->E1PITYP.
    Any help on this?

    Hello,
    I'm using the standard message type HRMD_A with IDOC base type HRMD_A06 and the function module IDOC_INPUT_HRMD.
    I have a doubt with field 'PROOF' when I fill the IDOC. Does anybody know for what is it used? For example, what's going to happen if I put PROOF = 'X' in an update operation?
    In my case I have tested that when PROOF = 'X', I receive the following warning in intotype 0001:
        The EMPLOYEE_ORG_ASSIGNMENT-ADMINISTRATOR_GROUP field is not maintainable in dialog, so it is ignored
        The EMPLOYEE_ORG_ASSIGNMENT-ORG_UNIT field is not maintainable in dialog, so it is ignored
        The EMPLOYEE_ORG_ASSIGNMENT-COSTCENTER field is not maintainable in dialog, so it is ignored
    but I cannot be sure if these warnings are due to PROFF.
    In the change data record screen, I have filled the following fields: plan version ('01'), object type ('P'), object id (employee number), PROOF ('X'), Operation ('U'). Structure for the idoc is EDIDC->E1PLOGI->E1PITYP.
    Any help on this?

  • Invoice Response Message Type ?

    Does anyone know if there is a Standard Message type to send an IDOC response back after receiveing a Logistics Invoice ?

    Hi,
    Please go through this [ document. |http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f6d2d790-0201-0010-9382-b50b499b3fbe?quicklink=index&overridelayout=true]
    Thanks,
    Abhijit

Maybe you are looking for