Standard MSI tvcard for 180 problems!

Help!
I don't seem to get any channel on my tv cards only thing i get is blue screens.
I installed everything and try to autoscan in media portal deluxe and i only get blue screens.
I am in holland and tryed every pal setting but it should be PAL_B (or not?) and i have cabel. It's also not the signal strength because i have crystal clear reception on my tv. I also have the problem that the s-video out only works while booting (it shows the windows xp logo in black and white) but when xp is loaded it dissapears again. But i guess this is due to a driver problem.
Can anybody give me any pointers for getting channels on my tv card?
Anybody experienced this?
Ronald

What do you mean by type of cable?
I already installed the beta drivers i found on these forums now i don't get just a blue screen (and i diddn't mean a BSOD) i get a lot of noise on the screen.
But still it finds nothing.
The strange thing is i installed chris-tv and the normal channel scan also finds nothing but there is an option somewhere called something like tv tuner driver options with wich i also can scan and this one finds stations!!!!!!!! but i can not save them and if i type the mhz into the channel list it also doesn't display anything. I just don't get it. What am i doing wrong?
It finds something with that option but nothing the 'normal' way.
Anybody can help me out there before i kick my 180 out of the window?
Ronald
ps: fixed the s-video problems with tv out. Just select it the right way with the driver

Similar Messages

Problem with Outbound Interface for Party in Standard XI Content for SNC

Hi All,
I am configuring a standard XI Content for SNC, the ASN Processing (DIMP ERP Backend). The provided Integration scenario involves three swim lanes which corresponds to an ERP, SCM and an external system. The external system is as an application component that is designed for B2B communication, i.e. a service with party which is called Supplier.
The first action within the scenario is Create ASN in the Supplier swim lane and send a message to the action "Receive ASN and update inventory(in transit)" within the SCM system swim lane. I have created a sender party that corresponds to the Supplier swim lane and also a receiver party that corresponds to the SCM system. I used the Integration Scenario Configurator to assign services and also all the comm. channel. However, when i try to generate the logical routing objects and collaboration agreements, i get the error message that there was no outbound interface associated with the sender(the external system) defined for the first action. There is no option within the Integration Scenario Configurator on how to assign/define the outbound interface that I want to use for the sender.
I have no idea how to assign the outbound interface to the action for the Supplier swim lane in an Integration Scenario that is from an XI Content. Has anybody configured something similar or come across the same problem? Any info will be much appreciated.
Luqman

Hi,
This could be the problem of confilting namespace or combinations.
in receive action just check that right message interface is configured at Inbound side.
just check any place void ?
1)just check the name as case sensitive.
2)Just check is there interface belongs to right software component.
3)Just check mapping assigned to the right combination or not.
its better to cross check all the component are assigned to right place or not.
****if helpful then rewards points
Regards,
Sumit Gupta

SOLUTION for my problems with MSI Z77A-GD65 + MSI N670 PE 2GD5/OC

Lately I had problems with my GTX 670 video card (MSI N670 PE 2GD5/OC) under Windows 7 Pro x64.
I got a lot of "Display driver stopped responding and has recovered" errors.
I had these errors once or twice a day, so I didn't really bother looking for an answer, also I couldn't reproduce the error.
Most games just worked fine, but not always... so I tried if I could reproduce the error.
I tried to stress test with MSI Kombustor and voila no windows error... noo... but the core voltage went to 0 mV within a minute and everything (screen / windows / kombustor) stuttered and I had to restart the system.
The strange thing was that the voltage went to 0 mV, but the GPU load went from 96% - 60% and back to 96%... why and how is this possible??
Now I could reproduce my problem... yes!
First I thought it was a driver problem, because I updated it to the newest version (310.70), so I tried to re-install an older driver and also the original MSI driver... no luck.
Maybe it could be a mainboard driver or some settings in windows, so I installed Windows 8... no luck.
Re-installed Windows 7 Pro x64 (basically because Windows 8 s*cks)... no luck.
I tried to put my video card in another system and there was no problem... so I thought my video card is not broken...
Maybe it's my my power supply... new power supply... no luck again... grrrr...
My solution was downgrading / flashing my mainboard (MSI Z77A-GD65) bios back to 1.5 instead of 1.7, because yes... live update had updated my bios... that was the problem.
I wanted to post this, because I couldn't really find the answer for my problem and maybe I can help a few people with the same configuration and problems.
Live well and... well you get the idea

Quote from: flobelix on 21-August-13, 04:12:05
Don't use TF II/TF III parts as they won't fit. Arctic Accelero Twin Turbo II or Accelero Mono PLUS are good value for money aftermarket solutions.
Thank you for the information and advice. As I was looking into those two, I noticed that Accelero's website claimed the Accelero Xtreme III would also fit, and NewEgg had it on sale, so that is what I wound up purchasing. It works quite well and is MUCH quieter than the Twin Frozr IV, even before the grinding noise started.
For anyone else considering this, please be aware that the Xtreme III is monstrously huge (it adds several inches to the length of the MSI N670 PE). Make sure you have plenty of room in your case for it.

Problem when creating standard recipient list for all documents

Dear All,
I am facing 'NO_RELATION_EXIST' dump issue. So i am following note 509191 provided by SAP. At the moment i am trying 2nd option i.e. for automatic document distribution, i am trying to create one standard recipient list for all documents to be released. However when i try creating a recipient list it does not allow me to create for a particular document type. As i can see there are 2 important key fields Document no and Document type. But i want to create only for a document type. The reason for that is this document type is for a PR attachment. So as soon as a PR gets released by the final approver this distribution should happen, irrespective of document number.
Please let me know if this is possible. I would like to apologize if it's too simple of a question as i am an ABAP person and have no knowledge in DMS. And there is no DMS consultant whom i can approach.
Thanking in advance.
Regards,
Saud

...distribution should happen, irrespective of document number...
This wouldn't be feasible because documents are identified in the recipient list by both,the document number and document type and hence are mandatory inputs.
Regards,
Pradeepkumar Haragoldavar

MSI X48C PLATINUM BIOS PROBLEM

Hello, i post this topic cause i don't saw any end for my problem, i got the same problem then a lot of people CPU work at half speed i send already message to MSI Customer Service, but what they tell me to do don't solve my problem:
MSI Customer:
As to your issue, please update your MB bios to v7.3A(7353IMS.73A)to fix it.
BIOS/7353/7353IMS.73A
After bios flash, please unplug power supply for a while and clear CMOS (refer to user manual) and load default to "save & exit ".
If you don’t have floppy drive, please make a usb flash into boot device instead.
Best regards,
MSI Technical Support Team
Now i hope i will got some help cause i don't know what to do else
My spec:
Processor
Model Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz
Speed 1.50GHz
Cores per Processor 2 Unit(s)
Threads per Core 1 Unit(s)
Type Dual-Core
Internal Data Cache 2x 32kB, Synchronous, Write-Thru, 8-way, 64 byte line size
L2 On-board Cache 6MB, ECC, Synchronous, ATC, 24-way, 64 byte line size, 2 threads sharing
System
System MICRO-STAR INTERNATIONAL CO.,LTD MS-7353
Mainboard MICRO-STAR INTERNATIONAL CO.,LTD MS-7353
Bus(es) ISA PCI PCIe IMB USB FireWire1394 i2cSMBus
Multi-Processor (MP) Support No
Multi-Processor Advanced PIC (APIC) Yes
System BIOS American Megatrends Inc. V7.3A
Total Memory 4GB DIMM DDR3
Chipset
Model MSI X48 Processor to IO Controller
Front Side Bus Speed 4x 167MHz (668MHz)
Total Memory 4GB DIMM DDR3
Memory Bus Speed 2x 167MHz (334MHz)
Video System
Adapter 2x ATI Radeon HD 4870 X2 (1GB, 780MHz2x900MHz, PCIe 2.00 x16, SM5.0)
Graphics Processor
Adapter ATI Radeon HD 48XX (RV770) (1.03, 1GB, 780MHz900MHz)
Storage Devices
WDC WD1500AHFD-00RAR5 150GB (SATA150, 3.5, 10000rpm, NCQ, 16MB Cache) 140GB (C)
CBM Flash Disk 2GB (USB) 2GB (E)
SONY DVD RW DRU-530A (ATA33, DVD+-RW, CD-RW, 1MB Cache) NA (D)
BOR R0L2ZWDUR (SCSI, BD-R, HD-DVD-R, DVD+-R-DL, CD-R) NA (F)
Operating System(s)
Windows System Microsoft Windows Vista Ultimate 6.00.6001 (Service Pack 1)
Platform Compliance x64

BIOS v7.4b2 is a BETA-Release of the BIOS-Series that prepares the upcoming v7.4 Final Version. It is not available for public download and MSI Live Update is not programmed to find it for you.
Also, as every Windows based flash is inherently risky and much more dangerous than any DOS based flashing mething, I suggest you do not use MSI Live Update for BIOS Updates. Unless you are prepared and ready to face the increased risk of a bad flash resulting from using this tool, it is in your own best interest to choose a flashing procedure that will update the BIOS from a plain DOS environment.
I have uploaded the 7.4b2-BIOS (BETA) in the following post. Flash it at your own risk!
>>>https://forum-en.msi.com/index.php?topic=117175.msg924921#msg924921<<<

Acrobat Standard 9.1.2 update problem?

I'm running Acrobat Standard 9 on Windows Vista Ultimate.
Right after installing the Acrobat 9.1.2 update, but before restarting my system, I tried to open a PDF file, and experienced cascading file openings, where Acrobat seemed to be trying to open every PDF file on my hard drive in a separate window. Each window header contains the statement: "Adobe Acrobat not responding." After shutting down Acrobat through Task Manager, I then restarted my system, thinking that the problem was a failure to complete the update installation, but when I just tried to start Acrobat (without trying to open any file), it automatically began opening multiple PDF files again.
At that point, I ran a restore to a previous Acrobat version, but did not restart my system. After the restore was complete, my desktop displayed two Acrobat startup icons, one for v9.1.2 and one for the previous version. I tried to start Acrobat by clicking the previous verion icon, but had the same problem with automatic multiple file openings. When I checked the software list in Control Panel, I found that it only contained v9.1.2, and not the supposedly restored version. Does anyone know if I had to restart my system to make the restore work?
When it looked like the restore to previous version had not worked, I did an Acrobat program repair through Control Panel, and restarted my system, but when I tried to start Acrobat, the same problem occurred. Every time it occurs, I have to shut down Acrobat through Task Manager.
I never experienced this problem until I installed the 9.1.2 update. Has anyone else experienced problems with this update? Does anyone here know the cause of the automatic multiple file opening problem?

As far as I'm concerned, there is something screwy about this whole release. I have used Acrobat Standard since v4.0, and was forced to buy v8 or v9 when I upgraded my OS to Vista, so I chose v9. However, the most important feature to me (besides converting other documents to PDF files), something called FreeText, was replaced by something now called Typewriter. Unfortunately, where FreeText was intuitive and seamless, I cannot view the result of a Typewriter session in my document, after entering new text and closing the feature. On top of that, Adobe tech support seems to have gotten less accessible over the years.
This new problem has now rendered my Acrobat program completely unusable, and for some reason, Adobe's Internet support contact form doesn't even interact with my inputs. This forum has proved useless to me for any problem-solving. Anybody from Adobe Engineering listening?

CO_TXT_OUTBINDING_ERROR , No standard aggrement found for ,

Hello,
I have a scenario XI-to-IDOC. I created a Service Interface and publish them as a Web Service.
I created a WSDL file from the Integration Builder(Configuration) and When I test the WSDL with the XML Spy, I got a following error message,
CO_TXT_OUTBINDING_ERROR , No standard aggrement found for , ...
But when I test with PI tool (the Component Monitoring>Integration Engine>Test Message)
The message is processed successfully.
And there is a differences between the two messages in the message monitoring. The Receiver Namespace and The Receiver Interface are different.
Message with Successful: The Receiver name and interface are name of IDOC
Message with Error:The Receiver name and interface is name of Service Interface.
And My Integration Configuration is following.
1. One Receiver Determination
2. One Interface Determination
3. One Receiver Agreement
What should I do for that error?
Thanx for your help..
Hasan

Hello, I discovered something about the problem,
My Service Interface has operations which have the type of external message.
I created data type and message type then I used the message type for that operation instead of external message.
I also changed source of message mapping which was the type of external message. I changed it as a message type.
Then it works.
But I have to use the external message. because my wsdl has a special characters. Which includes "-". I cannot create Data type includes "-".
Is there a solution for this..
Thanx.

MSI installer for the latest Adobe Reader XI releases

Hey. I had a bad problem in installing Adobe Reader XI. I checked the forums and I read this topic "http://forums.adobe.com/message/5230859" which was really helpful. But the real program is that the MSI package is only aviable for the 11.0.00 version and as you all know the 11.0.03 is already released and I want it but it doesn't have a MSI package, neither does 11.0.02 version or 11.0.01 version so where can I find the MSI packages for the latest releases.
Adobe Reader 11.0.00 version "ftp://ftp.adobe.com/pub/adobe/reader/win/11.x/11.0.00/en_US/"
Adobe Reader 11.0.01 version "ftp://ftp.adobe.com/pub/adobe/reader/win/11.x/11.0.01/en_US/"
Adobe Reader 11.0.02 version "ftp://ftp.adobe.com/pub/adobe/reader/win/11.x/11.0.02/en_US/"
Adobe Reader 11.0.03 version "ftp://ftp.adobe.com/pub/adobe/reader/win/11.x/11.0.03/en_US/"
Please help or do I have to stick with the 11.0.00 version for ever ?

There are no MSI installers for minor releases, only MSP patches (and EXE installers).
11.0.1: http://ardownload.adobe.com/pub/adobe/reader/win/11.x/11.0.01/misc/AdbeRdrUpd11001.msp
11.0.2: http://ardownload.adobe.com/pub/adobe/reader/win/11.x/11.0.02/misc/AdbeRdrUpd11002.msp
11.0.3: http://ardownload.adobe.com/pub/adobe/reader/win/11.x/11.0.03/misc/AdbeRdrUpd11003.msp

How to define a standard web template for a specific group of queries?

Hello experts,
I had to enhance the standard web template 0ADHOC and saved it as ZADHOC.
Then in SPRO t-code I defined it as the standard web template. The problem is: it started to be the standard web template for all the company queries.
Is there a way to define it as standard only for the queries of my project? Like adding some parameter in the web link only for my project queries?
Thanks in advance,
Helder

I have figured out how to slice it up myself, however it appears as though I have to do it all manually, drawing each box myself.
Yes, that's how it will have to be. There is no pertinent slicing in the PSD.
This will result in either ALLOT of work making sure that each box is perfectly aligned with the one before it, or uneven slices.
I am obviously doing something wrong.
Yes, you are not using guides. You know, those cute turqoise lines of which the document already has a few when opening it...
As for everything else - the template is simply rubbish. It's poorly organized and mostly unsuitable for building a website template right off the bat. Your work needs to start there by properly grouping items to mimic button states and then exporting them in two passes. And then there's things like this large dummy text etc. that simply don't make sense. Anyway, even if it sounds liek the same record over again: The biggest failure of any such work is to assume that PS could even spit out a working web page. All a web designer would use it for is to extract the graphical elements, but teh rest would stil lbe designed properly with standards compliance in mind in a web design app...
Mylenium

Oracle9i Database Release 2 Enterprise/Standard/Personal Edition for Windows NT/2000/

Hi,
Ive just been trying to download your Oracle9i Database Release Enterprise/Standard/Personal Edition for Windows NT/2000/XP for my home computer, but it wont even download properly. The Disk 1 file, "92010NT_Disk1.zip", intializes, and downloads in less than a second, saying all 67.7kb is complete, taking into consideration the file is over 600mb big. When i open the *.zip file, its absolutely empty. I tried the links for Disk 2 and Disk 3, and they are working perfectley.
Whats going on?
Is there a bug on my side, or OTN's?
Will this be fixed soon?
Or should i download an older version?
A little feed back would be grately appreciated, due to the fact i cant find the latest version of Oracle anywhere else on the World Wide Web.
Thank you for your time.
- File: 92010NT_Disk1.zip
- Date/Time: 03/09/02 11:30PM
- Internet Browser: IE 6.0.2600.0000
- O/S: Windows 2000
PS: Your "Preview" Button didnt seem to work for me either.

Hi Peter,
I downloaded the same zip files as you did for my home pc. The first zip file was not able to be unzipped by winzip. So I had to download the fisrt zip file again from OTN and the second time it was fine. I got all three zip files extracted and ran the setup.exe. Everything was fine till this point.
My problem is that Oracle 9i release 2 personal edition is not for XP home edition. I couldn't get the database correctly configured.
Li

When will you return standard edit boxes for To, From etc fields?

Starting from some recent version some of the developers spoiled TB by introducing non-standard edit-boxes for To, From , CC, etc fields in the new e-mail header.
Apart from the fact that their usability is questionable, they are just behave strange -- not like edit boxes in all other applications! If someone wants non-standard look, use add-ons. Do not spoil default version, please.
Reference: https://bugzilla.mozilla.org/show_bug.cgi?id=1051638

Toad-Hall, good points! Let me address them.
BTW, you obviously edited your reply because I do not see "What is the purpose of this question, which is not a question"
1. Anyway, the reason why I wrote here is very simple. When one sees "New update available" and clciks on "What is new" one sees the page with new features and the link "Tell us what you think". So I told ;-)
..of course, as always, on the way...it turned out that I am asking some question, but who is guilty in this sick design? Surely not me ;-)
Wanna file some bug to stop this? ;-)
2. Concerning "limited time". I simply do not believe it. One guy found time to spoil UI, and now suddenly no one (including him) has the time to return things back. My impression is that there is too much energy/time/etc which is directed in the wrong direction. For example, TB has a serious mailbox fragmentation problem, but developprs ignore it. They change (perfectly working) GUI instead!
3. If the developers know how to fix the bug using userChrome.css, why they still didn't do this by supplying an appropriate userChrome.css by default??? I can hardly imagine a user who wishes to tweak userChrome.css after (each) update. My understanding is that the software should come with standard (for this OS) GUI. If someone wants to tweak, than HE should edit userChrome.css.
My best regards,
Edward

Standard Labor Hours for a Operation

Hi, we are on 11.5.10.2 version of Oracle and I am need of locating in the database where I can find standard labor hours for an operation. Any help would be appreciated!

The std. labor hours are in a table called bom_operation_resources.
Try this
select msi.segment1 item
,bos.operation_seq_num OP_SEQ_NUM
,bd.department_code
,br.resource_code
,bors.usage_rate_or_amount
from mtl_system_items msi
,bom_operational_routings bor
,bom_operation_sequences bos
,bom_departments bd
,bom_operation_resources bors
,bom_resources br
where msi.organization_id=&org_id
and msi.segment1='&item'
and msi.inventory_item_id = bor.assembly_item_id
and msi.organization_id = bor.organization_id
and bor.routing_sequence_id = bos.routing_sequence_id
and bos.department_id = bd.department_id
and bors.operation_sequence_id = bos.operation_sequence_id
and bors.resource_id = br.resource_id
order by msi.segment1, bos.operation_seq_num, bors.resource_seq_num
Hope this answers your question
Sandeep Gandhi
Independent Consultant
513-325-9026

MSI P6N SLI sound problem under windows 7

Hi all!
I have an MSI P6N SLI mainboard and I have installed win7 ultimate x64 to get a look on that OS. Everything works fine expect one thing: I have no sound. I tried to install manually the realtek sound driver but no changes. When I check the Volume Control Options then neither the Speakers nor the Realtek Digital Output checked (but the speaker is plugged in).
However I have sound under Linux.
Could someone help me? (and sorry if I have missed the topic which resolves this problem if there is any)

Hi everyone,
hope it's ok to refresh this thread - I did not want to open up a new one, because this one matches my problem perfectly - but my speakers are plugged-in the right way
I'm running Win7 64 on the MSI P6N SLI (not v2 no Platinum) and am unable to install the sounddriver (well not correct - I did install the driver). The upgrade advisor said all green (under Win XP 32) and the MSI-Driver-Page propagates Win7 32/64 is supported for the SoundCard of my Board.
The driver installs just fine, but the device won't come out of "I have a problem"-state - always telling me "The drivers for this device are not installed. (Code 28)" (I event tried installing the driver manually with pointing the win-hardware-setup-routine to the driver-directory) - still no use - I removed and rebootet serveral times...
Hope anybody has a solution for this problem (I'm taking the posts above as a "this has to work"-basis so i'm not ready to give up and go out there and buy a new soundcard )
Thanks in advance for any hint.

MSI gt70 full of problems

hello,
A few months ago i bought a MSI gt70 for high school. So i use my laptop for running autocad 2014 (2D and 3D) and some gaming for time to time. But i have alot of problems with my expensive computer. He has so far been two times to the rmh service expected with the same problem again. as bsod 'bath pool header application errors, high CPU usage of 'windows error reporting' 'windows SQM consoltation' and so on.
every time I get my laptop back from rmh nothing happened beyond a complete re-installation. I think my SSD drive is broken, but my laptop just keeps coming back and there is nothing happened. Now I have my laptop a month back and again I have a high CPU usage, application errors, I / O error with hdtunepro and so on.
How do I solve this problem, I do not know where the problem lies and i really need my laptop for highschool, that within one week starts again.
greetings
brent

I also have an msi gt70 i have been using it for some months now i am an architect so i run a lot of 2d and 3d application ranging from autocad to maya and 3ds max i feel the issues has something to do with the cooling do u put on the fan when the laptop runs this applications the laptop is stable is just recently i started having issues with the battery am not much of a techno geek but check the cooling and make sure the fans is always on

MSI Z87M Gaming (Usb problem)

Hello,
In Device Manager i see "Universal Serial Bus (USB) Controller) is not working. Every USB device i own works with the new motherboard, except my Razor onza (360 controller) that is wired. I tried installing the driver from Microsoft, i also tried troubleshooting, but nothing works. I have downloaded the Intel USB 3.0 driver from the MSI site for my MOBO and now i'm wondering if there is something i'm missing.
I really need some help on this one..
Cheers!

Quote
The PC now starts and work but I am still worried this is going to cause problems to my other components. Motherboard is still in its early life. Bought in December and finished the build last week.
So you got it working ? What did you change?
How old is that power supply? In theory that PSU is sufficient, however if it's been around the block and after a couple of years, PSU performance deteriorates and that could cause failed starts. The reason for asking is that the VX series manufacture was discontinued quite some time ago.
Also see this article http://www.anandtech.com/show/6953/sea-sonic-and-corsair-power-supplies-certified-for-haswell
Corsair has not confirmed that the VX series will be fully compatible with Haswell as it is no longer in production. It may or may not work.

Standard MSI tvcard for 180 problems!

Similar Messages

Maybe you are looking for