Standard MSS screen for bulk approvals

Hi Forums,
In MSS, is there any screen for approvals (also bulk approval). Currently ESS requests like swipe in swipe out are coming to UWL as work item.
Thanks and Regards
Sudhir

Hi,
Anything needs be done to the UWL or Workflow as the approval is done in the Webdynpro Java application sap.com/ess~lea/LeaveRequestApprover
where u always get a consolidated list of leave request to be approved/ reject.. Sidharth / RJ please correct me if I am wrong .. ...
So you can modify this application in nwdi ..by adding a new collumn with a check box .. and when the submit button is pressed u can run the loop and approve/reject them one by one programatically ....
But as far as mass postings from the ECC are concerned you can go to the transaction PTARQ and 'Post' all the documents. Else, run the report PTARQPOST.

Similar Messages

Copy Standard infotype screen for country purpose

Hi,
I am trying to copy the Standard screen (2007) for the infotype IT0002 to make some country specific modification.
However I am not able to copy the standard screen as it is asking for the Access Key.
Can you please suggest if there is a way to copy the standard infotype screen without providing the access key.
Regards
Bharath

Hi,
Why don't you just enhance the infotype via PM01 - Enhance single screen?
(MP000200 screen 2007)
Regards,
Dilek
Edited by: Dilek Ersoz Adak on Feb 8, 2010 6:53 PM

Standard screen for PNP logical database

hello All,
I am using PNP logical database and i have modified the standard selection screen for PNP.
But now there is a button that appears , although the rest is supressed as i wanted it to.
Our forums active contrubutor suresh datti has provided me a solution before to go to sytem then status and then click screen 100 then invisible the push button and activate and re-execute the program. The method seems to work fine. But surprisingly after some time the button appears again..
any idea..??
thanks,
Reena..

>>>I do not knw how to create a variant or how variant are related to selection screens..can u please elaborate..
Don't worry..then its not the issue..
anyway Pl take a look at the following <a href="http://help.sap.com/saphelp_erp2005vp/helpdata/en/c0/980374e58611d194cc00a0c94260a5/frameset.htm">SAP Help</a> on Variants.
~Suresh

Modify selection screen for Logical Database 'SDF'

Hi
I need to make a section of the standard selection screen for logical database 'SDF' invisible. I have tried the differet selection screen options of the report attributes, but none of the provided ones give me what I want.
How can I find the name of the screen group for the "Line Item Selection" block of the selection screen so that I can make it invisible when the selection screen is displayed?
Thanks,
Thomas

I tried to do this:
Loop at screen.
         if   screen-group4 = '026'
           or screen-group4 = '027'
           or screen-group4 = '028'.
             screen-invisible = 1.
             modify screen.
         endif.
endloop.
This removed the selection text for these fields, but the Line Item Selection block is still visible, and the actual input fields are also visible. They now look like password input fields with all ***** in them.
What am I doing wrong?
Thanks for your help!
Thomas

Button in standard selection screen...

hello All,
I am using PNP logical database and i have modified the standard selection screen for PNP.
But now there is a button that appears , although the rest is supressed as i wanted it to.
Our forums active contrubutor suresh datti has provided me a solution before to go to sytem then status and then click screen 100 then invisible the push button and activate and re-execute the program. The method seems to work fine. But surprisingly after some time the button appears again..
any idea..??
thanks,
Reena..

then try to remove the button from there.

Standard MSS Reporting scenario Country dependent

Hi everybody,
We are setting the standard MSS scenario for reporting in SAP Portal but we are facing a question:
- We have a common list of reports in R3 for all the countries.
- We have some specific reports in R3 for each country.
How could we display in the standard Reporting iView the different list of reports dependind of the country?
Thanks in advance,
Jesús.

Hi Jesús,
Please check below links you might get some help.
HCM and Global Employment
[Global employement in ESS |;
Regards,
Piyush

To disable one field of standard sap screen.

Hi,
I want to disable one field of standard SAP screen for example
tran code : MD61
Field : Version.
Can Anybody suggest me with simple coding.
thanks
naresh

Naresh,
I guess this can be done using Transaction Variant SHD0.
Just try to check the links related to transaction variant.
1.go to SHD0
2.give the transaction as MD61
3.Transacation variant as zmd61
4.now press create button
4.Here you will get to see the initial screen on MD61
5.Press enter
6.You will get to see the field attributes in a screen called 'Confirm Screen entries"
7.There you can make a field as required/invisible/ouputonly.
Do check other links available in SDN for more info.
K.Kiran.

Text determination for Bulk Shipment or TD shipment

Hello experts,
Please help to understand how can we do Text determination in bulk shipments.
I have looked into VOTXN, but that is for LE shipments.
I also looked at the default texts for Shipment header, but not able to get the object.
Can anybody help us to understand the objects their.?
Please help.
regards,
Vineet

hi Vineet,
The standard text object for Bulk Shipment text is OIGTXT. Unlike SD text determination using VOTXN there is no text determination for bulk shipment. You can goto SE75 and select Text Object as OIGTXT. There you can see assigned standard text id's which appears on shipment header.
I hope this helps.
Mohit

Enhance screen for standard infotype

I need to enhance screen for standard infotype. I follow docs but nothing happens.
Here is my process by steps:
1. PM01 - select infty number
2. PM01 - generating CI_PXXXX (customer include)
3. create structure for this include
4. create customer screen for this include
5. PM01 - generate objects.
Then I am redirected to SE19 - BAdI-Builder. What should I do follow?
Created screen hasn't appear in se80 (MPXXXX00).
Thank you in advance!

I suggest you place your question in [ERP HCM forum|SAP ERP Human Capital Management (SAP ERP HCM);,

Changing HTML templates for Standard SRM screens!!!!!

Hello SRM gurus,
I have to modify the standard SRM PO screen. I have modified the screen and added the requirement tracking number field but on activation it gives me message to adapt the HTML template manually.
How to change HTML template assigned to the screen? Also what more needs to be done for the field to appear on the SRM portal?
I am not aware even of the transaction code to be used.
Your help will highly be appreciated and rewarded.
Regards,
Shrikant Gavali.

Hi,
You need not chnage the Standard SRM screen nor the HTML template to add a custom field in the PO sceen.
Please check these notes:
672960 - user-defined fields.pdf
676016 - user-defined fields.pdf
There is an additional note for req tracking no not available in SC but in your case you want the field in PO so wont be relevant.
Note 676016 - SRM: Requirement Tracking Number not available
Also refre this weblog for adding custom fields in the std SRM screens:
/people/nanda.kondagunta/blog/2006/10/23/how-to-create-custom-fields-in-srm
The tcode for PO is BBP_POC.If you ever need to modify the HTML template for this screen/trascn,goto SE80.select Internet service as BBP_POC.There you can see all the HTNL templates and each of which corresponds to some screen in the trascn BBP_POC(PO trascn).
BR,
Disha.
Do reward points for useful answers.

Bypass P_orgin auth check for standard MSS reporting

Hi SAPers,
on my HR system, I have 2 types of users : ESS/MSS users (via portal) and backend users (via sapgui).
ESS/MSS role does not contain any P_ORGIN authorization because it should be added to their authorizations if they are also backend users.
The problem is coming from standard MSS reports : the "time statement overview" among other report needs P_ORGIN (IT 0, 1, 2, 7, 8, ...) !
Is there a way to bypass the standard authorization check for MSS reports ?
Thanks in advance,
Olivier.

>
Olivier TACA wrote:
> Example :
>
> Portal Role for ESS user contains P_ORGIN for IT 0006 (Address)
>
> Backend Role for backend user contains P_ORGIN for IT 0002 (Personal data) ... and S_TCODE for PA30 of course.
>
> The backend user, who is also an ESS user, can manage IT 0006, which is not foreseen in the backend role.
>
> I use P_PERNR for the portal role to manage access to infotype.
I see two issues here:
1. ESS is NOT setup correctly.
- You don't need P_ORGIN for ESS. You only need P_PERNR. The trace might even show an error looking for P_ORGIN but you do not need it. This is an example of a role I have using ESS services for addresses. I don't have P_ORGIN, P_ORGINCON or P_ORIGXXCON. Do NOT use PA30, for ESS, that is very dangerous. The ESS services can be added to a role and should be use for ESS.
Here is an example of what I have:
Manually   HR: Master Data - Personnel Number Check                     P_PERNR
Manually   Address Change - Permanent and Emergency
     Authorization level            D, E, M, S, W                                                               AUTHC
     Infotype                       0006                                                                        INFTY
     Interpretation of assigned per I                                                                           PSIGN
     Subtype                        *                                                                           SUBTY
2. MSS - I can't find the service for the report you are looking for. If you provide the MSS service I can run some traces and probably help you isolate your problem. Example of an MSS service (sap.com/mss~pla/PlanningPrimaryCosts).
I hope I didn't sound too harsh; I am just trying to help.
Regards,
-John N.
Edited by: John Navarro on Aug 5, 2008 5:46 PM

Step by Step procedue to modify SAP standard ESS screens

Hi all,
I am new to Enterprise portal..
I have a requirement to modify the SAP Standard ESS screens, basically to add some new fields into it. I have the NWDI configured in the system. Can some explain me the step by step procedure to bring the source code into NWDS?
Regards,
Bharath Mohan B

Hi
Complete Custom like ESS development
SDN Day session in Las Vegas: Custom development of Web Dynpro ESS applications using Floor Plan Manager
https://www.sdn.sap.com/irj/scn/wiki?path=/display/profile/essPersonalInformationUIenhancementwithoutmodification&
Re: Steps for ESS MSS installation,Configuration
Go to above links step by step
Or you can search in SDN accrding to ur requiremt.
Regards
_SS

Need Help to create new screen for RF Sapconsole

Hi Guru's
I'm new on RF (but some years in ABAP) since last week.
I need help to create new screens for RF (SAPLLMOB).
Can someone explain me the procedure to create screen (with ABAP code after) or perhaps someone have an exemple (simple or not) ?
I have to develop 2 new screens with really few time.
And, another subsidiary question :
how SAP can transfert information between the flash gun and the screen i have developped.
Is there some code to add to enable this functionality or it is include in SAPLLMOB on standard fields ????
It's a new strange world for me today...
Many thanks to everyone who can explain me
Alain

hi,
I am facing this problem as well. Is there any reference to create the new screen?
Hope someone can help! Thanks!
Regards,
Darren

Any Standard Aging report for MM

Hello All,
I am looking a standard aging report for Materials on my storage location.
We are following batch.
Please help
Regards
Lal

Hi ,
I hope for your new requirement this might help you .
If you want to perform an analysis based on the key figure dead stock, proceed as follows:
From the Inventory Controlling menu, select Environment -> Document evaluations-> Dead stock.
1. The selection screen appears.
2. Specify the desired analysis criterion and selection parameters.
You can carry out the analysis for all plants, that is, for each material, data from all plants are grouped together or only for certain plants, that is, the analysis is created for every designated plant. Any period can be selected for the analysis. The system suggests 90 days as the period to analyze, the calculation starting from the current date.
The following functions can be used to process the material list.
Detailed Display
By using the function Detailed display, you can call up in a table or graph form detailed data for a material including the respective material document. You can analyze all material documents that are related to the evaluated stock of a material.
If you want to view detailed information for a certain material, proceed as follows:
Position the cursor on the desired material in the results list and select Edit ->Detailed display.
A dialog box appears in which you can choose either a graph or table display.
If you select the graphic, you can display the latest information on:
     Cumulative receipts/issues
     Warehouse issues
     Warehouse receipts
     Stock level
If you select the table, you can display the following information:
     Stock movements
     Cumulative stock movements
     Current stock level
From the stock movement table you can drill down as far as the material document level to see detailed information. To display stock movements on a particular day, position the cursor on the relevant line and select the Choose function. A popup window appears which displays all the movements on the selected day. The individual movements for a selected date are displayed in a dialog box.
To display the document for a particular movement, position the cursor on the relevant line and select the Choose function. A popup window appears which displays the document.
Similarly you can try for the slow moving also .please let me know wether you were able to find what you were looking for .
source: SAP
cheers
KP

How to use LSMW on CRM for bulk master data creation?

Hello Experts,
I need your help to able to use LSMW on CRM for bulk master data creation. Below is described my detailed requirement; -
We have CRM 2007 integrated with SAP ISU (ECC6.0). As per business process all Business Master Data (BP details, Business Agreement details etc) and Technical Master Data (Connection Object, PoD etc.) is created in CRM and then it is replicated in ISU. We are going to start Assembly Test soon. Now we need to have all master data in place. Tool we want to use is LSMW.
Now can you help me right from scratch on how to use LSMW for bulk master data creation in CRM?
Please give me documents / links etc that is relevant.
Regards,
Rohit

Hi,
I have looked into your query.
These are some information which might be useful to you.
What is LSMW?
Legacy System Migration Workbench or LSMW is SAP standard program that can be used to easily load / change master data or transactions in SAP without any programming at all. It can be used to upload data at cutover, such as: open orders, contracts, materials, vendors, stock on hand. It can also be used in a production system to make changes to existing data. Very limited authorization checks are available on the transaction, so the use of it must be very well controlled.
One input file can be used to create all the views of the material master. For all the material types. Even if different views and fields are used for the different materials.
Steps to take
1. Create text file with data to be loaded
2. Set up and run LSMW
The following link will provide good information on LSMW Idoc method:
[http://help.sap.com/saphelp_nw04/helpdata/en/ad/2d54a41d7011d2b42e006094b944c8/frameset.htm]
I hope this helps.
Regards,
Venkat

Standard MSS screen for bulk approvals

Similar Messages

Maybe you are looking for