Standard Object links In Tresury Module

Dear Experts,
Can anyone tell me what are the standard object links in Treasury Module.
Regards
jayanth

Dear Experts,
It would be great if anyone will let me know if there are any  standard object links for SAP TREASURY MODULE.  if not please also let me know if we have to do any development for the same.
Regards
jayanth

Similar Messages

  • Object Links for HR Person PA10

    Hi DMS Experts
    I want to link DMS Document to a Person in HR via PA10 where we can see data of Person in HR.
    Also I need help in linking new object to DMS.If these object are not in standard Object link configuration in Define Docuemnt Types.
    I have Following questions
    1. how to identify that its a Object.
    2. Whether it can be linked to DMS.
    3. what are configuration and developements that are to be carried out.
    I have gone through Img Help
    Object links to other SAP objects                                                                               
    You can make an object link to SAP objects that are not shown in the  
        possible entries list. To do this, proceed as follows:                                                                               
    o   In the standard system, there are already two special screens for 
            the module pools SAPLCV130 and SAPLCV140 for the linked SAP object.
            You must create two new screens with the same number for the module
            pools SAPLCV130 and SAPLCV140 .                                   
            The processing logic must follow that of screen 1204 in program   
            SAPLVC130.                                                                               
    o   Create function module OBJECT_CHECK_XXXX (XXXX = object name)                                                                               
    -   If the object can be classified, this function module already 
                exists .                                                                               
    -   Otherwise copy the function module for linking equipment      
                DOCUMENT_CHECK_EQUI and change it as required for the new     
    This is little bit technical and I am not able to understand.
    Kindly help me
    With best regards
    Mangesh Pande
    Email Id [email protected]

    Hi,
    from my point of view the best way to manage these documents in the HR transaction PA10, PA20, PA30 instead linking documents to HR objects.
    In the standard there is no suitable object for document-object links. Please see all the available SAP standard objects in SE80, function group CV130 under screens.
    So you can go to PA30 and use the service for object button in the upper left corner. Here you can add business documents for each person.
    Best regards,
    Christoph

  • DMS Object Link at Maintenence Order and Service order level

    Hi SAP Gurus,
    We had a requirement for maintaining DMS Object at Service order and maintenence order level, as Standard DMS does not provide any Standard Object link at Order level, we went for development and following the Standard procedure i could bring the Order Tab in CV01N Object Links, and also i could search the relavent maintenence order and maintain documents relevant to it,
    But the biggest problem now is i could not create DIR from the Maintenence or service order screen IW31, and the document i have placed at the order is not visible in the order screen at all,
    i know it is some sort of enhancement in the Order screen to allow DMS Documents to appear in the Order screen to provide this funtionality.
    let me pls know what exactly has to be done, as there is no config at the order level to get the DMS Screen, as DMS is not a standard object at the order level.
    one approch as suggested is modifiying the Order screen or using Screen Exit Enhancement for Order but not sure which one to use or how to move ahead,
    Thanks n Regards
    Priya S

    Dear Christoph Hopf
    Many Thanks for your answer,
    i went through the said SAP Note, but it only speaks about the notifications level, where SAP itself has provided the standard DMS Object links, and iam in latest ECC-6 version where this note  is taken care of i think,
    iam looking for creating DMS Document (DIR) from the maintenence Order IW31 transaction screen, and have developed new Object link for Maintenence order,
    but the main problem is, iam not able to create DIR from the IW31 Screen directly as Maintennce order is not a standard SAP Object,
    please let me know how to get the list of documents that i have attached to a maintenence order to appear in the IW32 maintenence order screen, and also we need to create the documents (DIR) directly from IW31 / 32 screens.
    Thanks and Regards,
    PriyaS
    Edited by: Priya S on Aug 19, 2009 1:50 AM
    Edited by: Priya S on Aug 20, 2009 1:54 AM
    Edited by: Priya S on Aug 24, 2009 6:24 PM

  • Object link to a reservation

    Hi,
    Is it somehow possible to attach documents to a reservation (MB21) ? Can't seem to find an object for this.
    with regards
    Erik

    Hi Erik,
    in the standard object link behavior there is unfortunatly no object for linking reservations to documetn info records.
    But you can link document info records to the relevant material master.
    Best regards,
    Christoph

  • How to create Object Links For non standard SAP Objects?

    Hi all,
             I need to create an object link in cvo1n for a non standard SAP object (inspection characteristics) . we have two ways to do this
    1. Create a screen for the rquirement by taking the standard screens as reference.
    2. Implement badi document_obj.
    I need a step by step process to perform both the steps. Sample codes will be helpful.
    One more thing is that i need a link in the standard screens of inspection characteristics also. How to get a two way link both in cv01n and in the standard inspection char screen.

    hi
    Customizing for the Do cument Management , you must maintain the key fields for the SAP objects that you want to link to document info records, by choosing Control Data ® Maintain key fields.
    Process
    Program two screens for the following module pools for the SAP object that is to be linked additionally:
    u2013 SAPLCV00
    u2013 SAPLCVIN
    The process logic must be according to that of screen 0204 in program SAPLCV00 and must not be changed.
    Create the function module OBJECT_CHECK_XXXX (XXXX = name of the SAP object).
    If this object can be classified, this function module already exists in the standard system. Otherwise, copy the existing function module OBJECT_CHECK_EQUI (linking of equipment) and change it to suit the new object.
    also you can attach the document to PRT also. but it will not show you in dms. This type of attachment is only from otherside.
    thanks
    nitin
    award point if useful

  • DMS-Object link to business partner (ISU-Module) required. Plz help.

    Hi all,
    I require to give an object link from DMS to Business partner of ISU module t code BP.
    So checked up in SPRO- Control data- maintain key feilds, & i found that BUT001 is the transparent table which is used here. so i inserted the same in object link for my document type, but there was no screen no defined to it so i gave the screen no as 500, the tab has appeared under the objectlink tab in DIR, but the screen is not appearing, it is blank, also in the business partner Transaction the DIR table is not appearing.
    What should i do? is there any other setting required, or the table which i have found is wrong. Plz help.
    Regards
    Tushar.

    Hi,
    Have you solved your issue? I want to have the same link. If you have please give me a step by step description.
    I saw the screen number for general business partner is 1249, maybe you can use this.
    Regards Camilla

  • Object Link for DMS

    Hi Experts,
    As per Client Requirement, I need to create an object link in CV01N for a non standard SAP object as mentioned in the list.
    HR Module
    Personnel Number
    Position
    Organization Unit
    Personal area
    FICO Module
    Business Area
    Cost Center
    As i needed a step by step process to achive this.Sample codes (from ABAPer) with screen numbers will be more helpful.Please don't tell to look for help link/document bec'z i allready had those.
    Pts will be awarded for useful answer ..be sure..
    Thx in advance for reply..

    Hi,
    You can create New objects using the T.code: SE80.
    You can make an object link to SAP objects that are not shown in the possible entries list. To do this, proceed as follows:
    1. In the standard system, there are already two special screens for the module pools SAPLCV130 and SAPLCV140 for the linked SAP object.
    You must create two new screens with the same number for the module pools SAPLCV130 and SAPLCV140. The processing logic must follow that of screen 1204 in program SAPLVC130.
    2. Create function module OBJECT_CHECK_XXXX (XXXX = object name) If the object can be classified, this function module already exists.
    Thank You,
    Manoj
    pls consider points if useful..!

  • DMS object link to MIGO tcode - attach to GRN

    Hi,
    Our scenario requires us to link documents with specific GRN number via MIGO tcode. This is a non-std object and the logic
    1.Program two screens for the following module pools for the SAP object that is to be linked additionally:
    u2013 SAPLCV00
    u2013 SAPLCVIN.......
    is not helpful at all and incomplete.
    Could anyone please let know what needs to be done from GRN object side to enable documents to be attacvhed.
    Archivelink is not an option because several documents need to follow life ctycle and versioninG.

    Hello,
    It is a two step process:
    1. Screen activation in SAP DMS
    2. Screen activation in SAP Object
    Please follow below steps:
    1. Configuration of screens as per SAP suggestion & Maintenance of Standard Structure MCDOKOB
    Material document number filed MBLNR need to be included in the standard structure.
    2. For t code MIGO, following function module needs to be maintained - OBJECT_CHECK_MSEG
    3. Maintenance Key Fields
    MSEG MIGO MBLNR MBN
    4. Maintain Object link
    MSEG Material Document Screen Number (enter the screen number which you have configured)
    Use the above created object link in your document type.
    5. Implementation of BADI - MB_MIGO_BADI, this is to activate the sceen of documents in MIGO
    I have not done this. So it is possible that i would have missed some step.
    But I am sure, it will help you a lot.
    Thanks & Regards,
    Mihir Popat

  • DMS object links to SRM

    Hi,
    You can used this method to create object links between DMS different ECC objects (See below) Is there anybody who can tell me if you can use the same method to create object links between DMS and SRM objects? It should be very helpful for me.
    Thanks in advance
    //Håkan
    Adding Other Objects
    Purpose
    You can also link documents with SAP objects for which no linking is supported in the standard
    SAP System.
    Prerequisites
    In Customizing for the Do
    cument Management ,SAP objects that you want to link to document info records, by choosing Control Data ® Maintain key fields.
    Process
    Program two screens for the following module pools for the SAP object that is to be linked additionally:
    u2013 SAPLCV00
    u2013 SAPLCVIN
    The process logic must be according to that of screen 0204 in program SAPLCV00 and must not be changed.
    Create the function moduleOBJECT_CHECK_XXXX (XXXX = name of the SAP object).
    If this object can be classified, this function module already exists in the standard system. Otherwise, copy the existing function module OBJECT_CHECK_EQUI (linking of equipment) and change it to suit the new object.
    Result
    After you have completed the above, documents can be linked with the SAP object that you have added. You define the settings for this in Customizing for the Document Management System (see:
    Object Links).

    Hey Manghes,
    The business scenarie is that poeple working in only SRM not in ECC system at all and they want easyly reach or link some document in DMS to SRM objects by using object links.
    BR
    //Håkan

  • DMS-Search via object Links

    Hi Experts,
    I am new to the DMS Module and have some queries- I have attached a DIR to a PR and PO and in CV04N, while I am doing search with object links,either when one value is correct , the DIR is showing,(like an OR Gate). i.e when PR is correct and PO is wrong, it is showing the DIR or when PO is correct and PR is wrong, it is still showing the DIR. So, is this a standard feature or is there any configuration change I need to do?
    Thanks in Advance

    Hi Aravind,
    step-1 create doc.type for PO in DC10 (IMG tcode)
    step-2 select doc.type,click left side define object link,here you have to assign the PO table EKPO.
    step-3.for more information check below notes.
    Note 880077: Performance problem using object links
    Note 885977: Extension to note 867241 on object links
    Note 926060: Extension of note 885977 for object link Purchase Order
    Note 960202: Object Links Deleted While Adding New Objects
    Note 1002648: Wrong behavior while using RFC_CHANGE_DOCUMENT_MASTER.
    Regards,
    M.Arunkumar
    SAP PLM Functional consultant.

  • Easy DMS and object links

    Hi
    I have added cProjects object links from DMS. It works fine if I create an object link from cProjects, but if I add an object link from DMS there is no link created in cProjects. Ideas anyone??
    Regards Camilla

    Hi Camilla,
    Regarding your description I would kindly ask you to check your
    object link settings.
    To grant that allways the currenct screens and authorizations were
    called please maintain also the value "1" into the "Authorization"
    column. For further informations on this maintainance please see the
    attached note 375452. It's important that you not enter the mentioned
    screen number wihtout the leading "1" as this number is added
    automatically by the system (e.g. object MARA 1201 maintain like MARA
    201). You can do this in customizing under:
    Transaction SPRO
    > Cross-Application-Component
        > Document Management
             > Control Data
                 > Define screen for object links
    If you need the dynpro number or object you will find all standard SAP
    objects and their screen number in function module CV130 (Screens) by
    transaction SE80. Please maintain all necessary SAP objects.
    Best regards,
    Christoph

  • Object link

    Hello
    All experts,
    I have to attached the document in delivery & in maintenance order.But as per my knowledge these are not standard object in SAP.So these can do with screen exit can any one tell is there are any standard exit are available for that?
    OR we have to create some functional module for both the object.
    Please mail me on [email protected]
    Regards
    Ajju

    Hi,
    You can link a document to a notification and the notification to the work order, that is i one solution. Other wise if you link a document to function location or a equipment a button will show up in the work order there you can reach the alocated document. You can also use PRT tool and conect a document to an operation on a work order
    Rgrds/Håkan
    Edited by: Hakan Anderberg on May 6, 2008 8:08 AM

  • Customization of Object Link of Transaction CV01N

    Hi All
       Can anybody help me out in Customizing Object Link of Transaction CV01N.
    I want to know exactly how could we add a customized tabstip in object link other than SAP Standards like Equipment Master and Material Master.
    How could i link these to R/3 transactions like MB03, FB03, CJ20N etc....
    When i save these documents it should get generated and saved to the document data of the respective transactions.
    Thanks
    Raja

    hi,
    You can also link documents with SAP objects for which no linking is supported in the standard SAP System.
    In Customizing for the Document Management , you must maintain the key fields for the SAP objects that you want to link to document info records, by choosing Control Data  Maintain key fields.
    1.     Program two screens for the following module pools for the SAP object that is to be linked additionally:
    u2013 SAPLCV00
    u2013 SAPLCVIN
    The process logic must be according to that of screen 0204 in program SAPLCV00 and must not be changed.
    2.     Create the function module OBJECT_CHECK_XXXX (XXXX = name of the SAP object).
    If this object can be classified, this function module already exists in the standard system. Otherwise, copy the existing function module OBJECT_CHECK_EQUI (linking of equipment) and change it to suit the new object.
    After you have completed the above, documents can be linked with the SAP object that you have added. You define the settings for this in Customizing for the Document Management System (see: Object Links).
    regards, benakarajes

  • DMS Object Link for SRM

    Dear All,
    Can you please provide me the object link for SRM( Inbound Delivery).
    Our team requirenment we should need to integrate with SRM through DMS (object link)
    So provide me the solution?
    Thanks
    Edited by: RS on Aug 26, 2010 1:14 PM

    Hi RS,
    Kindly follow following steps. Add the new object in DMS object link and DMS screen on new object screen with help of Abap'r.
    This can be achived with help of Abap'r and following steps:
    Purpose
    You can also link documents with SAP objects for which no linking is supported in the standard SAP System.
    Prerequisites
    In Customizing for the Do cument Management , you must maintain the key fields for the SAP objects that you want to link to document info records, by choosing Control Data  Maintain key fields.
    Process
    1. Program two screens for the following module pools for the SAP object that is to be linked additionally:
    u2013 SAPLCV00
    u2013 SAPLCVIN
    The process logic must be according to that of screen 0204 in program SAPLCV00 and must not be changed.
    2. Create the function module OBJECT_CHECK_XXXX (XXXX = name of the SAP object).
    If this object can be classified, this function module already exists in the standard system. Otherwise, copy the existing function module OBJECT_CHECK_EQUI (linking of equipment) and change it to suit the new object.
    Result
    After you have completed the above, documents can be linked with the SAP object that you have added. You define the settings for this in Customizing for the Document Management System (see: Object Links).
    Regards,
    Ravindra

  • Object link for RFQ

    Hi all,
    How can we add Object link with Request for Quotation (RFQ)? actually both EBAN and EKPO are already used for other Objects like PR and PO. Apart from this how to select the screen number. Can i use EKKO? Please guide with procedural steps.
    Thanks,
    Venu.

    Hi Venu,
    Kindly follow following steps and revert back:
    Hi Mangesh,
    This can be achived with help of Abap'r and following steps:
    Purpose
    You can also link documents with SAP objects for which no linking is supported in the standard SAP System.
    Prerequisites
    In Customizing for the Do cument Management , you must maintain the key fields for the SAP objects that you want to link to document info records, by choosing Control Data  Maintain key fields.
    Process
    1. Program two screens for the following module pools for the SAP object that is to be linked additionally:
    u2013 SAPLCV00
    u2013 SAPLCVIN
    The process logic must be according to that of screen 0204 in program SAPLCV00 and must not be changed.
    2. Create the function module OBJECT_CHECK_XXXX (XXXX = name of the SAP object).
    If this object can be classified, this function module already exists in the standard system. Otherwise, copy the existing function module OBJECT_CHECK_EQUI (linking of equipment) and change it to suit the new object.
    Result
    After you have completed the above, documents can be linked with the SAP object that you have added. You define the settings for this in Customizing for the Document Management System (see: Object Links).
    Regards,
    Ravindra

Maybe you are looking for