Standard ods importance

hai all,
what is the importance of standard ODS ? is there any problem while using standard ods? and give me OSS note number.
thank u

Hi,
DataSources relate to their source systems. In Business Content, the DataSources are defined for R/3. Considering the difficulties in the R/3 ETTL process, we can say that the R/3 DataSources in Business Content make data warehousing projects much easier and more manageable.
ods are also standard which suites the datasources. which r ready for use.
regards
md zubair sha

Similar Messages

Error in Loading FIGL data into a standard ODS

Hi,
I have encountered an error when i attempted to load FIGL data into a standard ODS. Below is the error i received:
Error message during processing in BI
Diagnosis
An error occurred in BI while processing the data. The error is documented in an error message.
System Response
A caller 01, 02 or equal to or greater than 20 contains an error meesage.
Further analysis:
The error message(s) was (were) sent by:
Second step in the update
Second step in the update
Second step in the update
Second step in the update
Procedure
Check the error message (pushbutton below the text).
Select the message in the message dialog box, and look at the long text for further information.
Follow the instructions in the message.
Initially i discovered a work around wherein i loaded the data into a write optimize ODS. It was successful. However, when i attempted to data mart the data and put it into a standard ODS, the similar error occurred.
Please help me with this problem.
Ramon

Hi,
Hi,
I will suggest you to check a few places where you can see the status
1) SM37 job log (In source system if load is from R/3 or in BW if its a datamart load) (give request name) and it should give you the details about the request. If its active make sure that the job log is getting updated at frequent intervals.
2) SM66 get the job details (server name PID etc from SM37) and see in SM66 if the job is running or not. (In source system if load is from R/3 or in BW if its a datamart load). See if its accessing/updating some tables or is not doing anything at all.
3) RSMO see what is available in details tab. It may be in update rules.
4) ST22 check if any short dump has occured.(In source system if load is from R/3 or in BW if its a datamart load)
Once you identify you can rectify the error.
If all the records are in PSA you can pull it from the PSA to target. Else you may have to pull it again from source infoprovider.
If its running and if you are able to see it active in SM66 you can wait for some time to let it finish. You can also try SM50 / SM51 to see what is happening in the system level like reading/inserting tables etc.
If you feel its active and running you can verify by checking if the number of records has increased in the new data table.
Thanks,
JituK

Report on standard ODS object and transactional ODS object

hi gurus
i have an infoset which is built on two transactional ODS objects and one standard ODS object which gets the data on regulr schedule. the transactional ODS obejcts get the user entered data.
when i query on the infoset, i am getting the data. and when i query on the standard ODS object i am getting the data. but when i am trying to create a query on the combination of the Infoset and the ODS object i am not getting the data.
is there any way to generate report on the standard ods object and Infoset from transactional ods objects.
your help will be greatly appreciated.
thanks in advance
vijaykumar

Hello ViJaY,
how r u ?
Try creating a MultiProvider with the Standard ODS and InfoSet.
Best Regards....
Sankar Kumar

Where we can use standard ODS Object and Trasactional ODS Object ?

Where we can use standard ODS Object and Trasactional ODS Object ?

Hi,
In a standard ODS object, data is stored in different versions (active, delta, modified), whereas a transactional ODS object contains the data in a single version. Therefore, data is stored in precisely the same form in which it was written to the transactional ODS object by the application. In BW, you can use a transaction ODS object as a data target for an analysis process. The transactional ODS object is also required by diverse applications, such as SAP Strategic Enterprise Management (SEM) for example, as well as other external applications.Transactional ODS objects allow data to be available quickly. The data from this kind of ODS object is accessed transactionally, that is, data is written to the ODS object (possibly by several users at the same time) and reread as soon as possible.
It offers no replacement for the standard ODS object. Instead, an additional function displays those that can be used for special applications.
Regards,
R.Ravi

Updating Standard ODS through database statements

Hi All,
Is it possible to insert records directly into the active table of a standard ODS through database INSERT statements. If yes, then will such records show up in the BEx queries ?
Regards,
Satya

Hi,
I am planning to generate the report from ODS only. I want to update ODS through a program because the data i want to update does not come from R/3. I need to get the data by doing some lookups in BW syatem. What i want to know is if i update data direclty in the active table of the ODS, will it be visible in reports if i create a report on ODS ?
Regards,
Satya

How to identify the standard ods / cubes are delta capable or not?

Hi All,
How to identify the standard ods / cubes are capable of handling delta o not ?
Pls advise me on this!!
Thanks
Pooja

Hi Pooja
Delta capable is based on datasource but not on ODS or cube.
You can get this info from ROOSOURCE table,give data source name and check the field "DELTA".
If the field is left blank,it implies that the datasource is not delta capable.
Regards
Jagadish

Difference between standard ods and transaction ods

hi experts make this answer

Transactional ODS Object
Definition
A transactional ODS object differs from a standard ODS object in the way it prepares data. In a standard ODS object, data is stored in different versions (active, delta, modified), whereas a transactional ODS object contains the data in a single version. Therefore, data is stored in precisely the same form in which it was written to the transactional ODS object by the application. In BW, you can use a transaction ODS object as a data target for an analysis process. You can find more information under Analysis Process Designer.
The transactional ODS object is also required by diverse applications, such as SAP Strategic Enterprise Management (SEM) for example, as well as other external applications.
Use
Transactional ODS objects allow data to be available quickly. The data from this kind of ODS object is accessed transactionally, that is, data is written to the ODS object (possibly by several users at the same time) and reread as soon as possible.
It offers no replacement for the standard ODS object. Instead, an additional function displays those that can be used for special applications.
Structure
The transactional ODS object simply consists of a table for active data. It retrieves its data from external systems via fill- or delete- APIs. Refer to ODS Data and External Applications.
The loading process is not supported by the BW system. The advantage to the way it is structured is that data is easy to access. They are made available for reporting immediately after being loaded.
http://help.sap.com/saphelp_nw04/helpdata/en/c0/99663b3e916a78e10000000a11402f/frameset.htm
Regards
Anujit Ghosh

Audio standards for importing music.

Is it just me or is there complete apathy for the way that audio sounds now? It drives me up the wall the way that some listeners can bounce .mp4 files 10 times and not hear the loss in audio quality. I understand that the "standard" for my generation has turned in to the iPod earbud, but isn't there a better way to import? Maybe the solution lies in the mixing of music. No one listens to the songs they purchase on iTunes on high-end stereos anymore. Should we be mixing for earbuds?
Powerbook G4 15'' Mac OS X (10.4.8)

There's no "standard" for mixing and mastering audio so...
There are standards for file types but the "quality" of the converted music is left up to whoever makes the codec.
How would this standard for importing music work exactly?
I understand that the "standard" for my generation has turned in to the iPod earbud, but isn't there a better way to import?
Sure there is. Crank up the bit rate or go with lossless.
RIP a CD a few different ways and compare the RIP'd songs.
If size does not matter, use Lossless, AIFF or WAV.
About the only reason for MP3, AAC and other lossy codecs is to make the file size smaller.

Pass parameter through standard page "import xml content and actions"

Dear Portal experts,
As you know, a standard portal page is configured to allow the import of XML file. It is located in the portal in the path system admin -> transport -> xml content and actions -> import
I configured a quick link u201Cimportu201D to the page so now the link http://myserver:port/irj/portal/import allows me to access directly to this screen.
What I would like to do now is to pass the parameter related to u201Cfile nameu201D through this screen meaning that I would like that http://myserver:port/irj/portal/ import/filename=C:\test.xml fills automatically the fields u201CXML fileu201D with C:\test.xml
Please do you know how to achieve this ?
Thank you very much and regards

hi,
@Maksim :
When user launch an URL like http://myserver:port/irj/portal/ import/*filename=C:\test.xml, he is requested to provide username and password; as this link is a shortcut for the upload xml page, there is a check of authorization and only portal admin that have authorization and permission on this page/iview will be able to upload xml file through the URL. Hope this clarify.
@Kumar :
thank you for your answer. What a pity to not be able to pass parameter through standard portal page/iview particularly knowing that we can pass paramater through many kinds of iviews (transactional iview, url iview, VC iview...). I explored some option on file com.sap.portal.ivs.init.par but this was unsuccessful. However, thanks to this [link bellow|http://wiki.sdn.sap.com/wiki/display/Snippets/ComponenttouploadXMLfilewithPCD+objects], I was able to upload through URL the XML file.
The problem is that I can upload only XML file that are stored in the server not in the local user computer. My requirement is to be able to upload local XML file stored on user's computer.
If someone could provide and idea/solution, I would be very grateful.
Cheers

11.5.9 - standard Journal Import Run - Scheduling

In 11.5.9, Is it possible to schedule the standard concurrent program "Journal Import" to import the records from GL interface instead of doing it manual Journal --> Import --> Run? . I have to pass only sourcename withhout group-id.
Thanks in advance.

Please review the following note in metalink:
How To Schedule Journal Import Program [ID 371189.1]
The note mentions to apply patch if you want to get the scheduling feature in releases earlier than 11.5.10.
Hope this helps.
Thanks and Regards
Manish Jain.

Fixing standard transport import job

Hi,
We have R/3, APO and B/W.
In R/3 and APO, when we move batches of transports from QA to Staging(STMS_QA) everything is fine.
But in the past we sometime experimented problem when doing the same in B/W. Somebody once told us that when you move many transports together, the standard import job perform first step for all transports then 2nd step for all of them, etc......
This is no problem for R/3 and APO, but we were told that does not always work in B/W. Because of that, we change our process for B/W. We run STMS_QA and the import job, one transport after the other. Since the import job is scheduled every 15 minutes, if we have 8 transports to move, it will take 2 hours to perform them all.
I was ask to write a job that would do this automatically, then replacing the standard import job.
Then I'm saying to myself: we are not the only ones to move transports in batch in the world? Do everybody reinvent the wheel each time like I am about to do?
Can somebody give me some thought over this? Any suggestion?
Thank you!

Discussion successfully moved from SAP Transportation Management (SAP TM) to SAP NetWeaver Administrator where it belongs.
Your recent question posted in SCN SAP Transportation Management community is in the wrong place. SAP TM is devoted to the SAP application which manages the physical movement of goods using trucks, trains, planes, and ships. What you posted regarding software changes from one system to another (Dev to QA, for example) should be in the Netweaver Administrator community. Please use the correct community in the future.
Regards, Mike (Moderator)

Is there any standard ODS for Contract (value type and quantity type)?

We know that in MM, contract records can be categorized into two different categories, Value type and Quantiy type. We are trying to see if there is any Contract ODS in business content that we can install which can take care of these two types of contract records that we can bring them over to BW from R3?
Thanks

Hi Kevin,
Please see this link,ODS looks related to your requirement.But seems its for CRM and not for MM.
http://help.sap.com/saphelp_nw04/helpdata/en/38/c3813ed9d23e44e10000000a114084/frameset.htm
cheers,
Vishvesh

Standard PO import in 11i

Is it true that, Oracle now supports PO import in the latest releases of 11i? If yes, what is the release number? Any documentation help (at least location of the document) will be greately appreciated.
Thanks
Raja

Hi Paarthy,
Thank you very much for the response.
Yes i have seen the rate is defined for that date.. from non-funcational curr to functional curr.
And its not exactly the same as we populated in RATE column.
So is it we need to check conversion rate in GL and pick it and same needs to be populated in rate column in po_headers_interface?
data is coming middleware tool to po interface tables,this way of populating may not possible, need to check.
OR
Just populating CURRENCY_CODE= some value ,RATE_TYPE='Corporate' ,RATE_DATE= required date is enough, so that interface will pick the rate from GL and use it?
I mean rate is null.
Thanks,
Kittu

How to Check Log File for 'Import Standard Purchase Orders' program?

Hi,
When the run the standard program 'Import Standard Purchase Orders' after inserting data to PO interface tables. I am getting the log message as mentioned below.
Start of log messages from FND_FILE
To get the log messages for PDOI, please use the following id to query against FND_LOG_MESSAGES table:
AUDSID = 40499066
End of log messages from FND_FILE
When I go and check for the message in mentioned table against the AUDSID,I couldn't find any error listed.
Even I verified the po_interface_errors table, It returns NO ROWS.
Help me on this issue.
Thanks.

Did you checked the imported PO ? follow step 7-8 from MOS note and check
Vision Demo - How To Import Standard Purchase Orders Using the Purchase Document Open Interface PDOI [ID 1054004.1]
You can also check
How To Diagnose Problems With Importing Standard Purchase Orders [ID 781351.1]
thanks

Import manager error, when using Standard maps

Hi,
I am trying to import data using Import manager statndard Maps.
For certain maps I am getting the following error message.
<b>"Unable to retrieve unique values for field 'Key <Clone>'."</b>
And also after getting this error if I close the current statndard map and open another standard map, import manager crashes.
I am using MDM Version 5.5 SP2(5.5.24.04).
Thanks
Subbu

Hi Subbu,
I encountered this issue around inability around unique values for cloned fields too, although in custom maps, not standard ones.
1. When reported, this was fixed in 5.5.24.05. So, try usin 5.5.24.06 and see if you still face it.
2. The other option or workaround to be precise is to uncheck the Read-only box in bottom left hand corner of the second screen. This should work too.
As a last note, even in 5.5.24.06, I still encounter this issue when importing into nested look up tables. This is up for future fixes.
I use the uncheck read-only as work around for now.
Good luck!
Savi

Standard ods importance

Similar Messages

Maybe you are looking for