Standard or Customs Cooling methods for the CPU N/S Bridge? Suggestions?

Hello,
Just wonder if people are using the stock HS/FAN on the Duo2 or slapping on a custom HS/Fan.
Thanks,
3DMark2003 (stock no overclocking score) = 18952   (Now I don't know if thats good or not)
Jason.

I would suggest to redirect the airflow of your CPU heatsink fan to the NB. That will help a little bit more.
Be very careful when you overclock the V_pcie, this increase the Core Voltage to the NB. The default voltage is 1.5V, some users here crank up to 1.75V, that's some 16% increase, expecting 16% increase of temperature too! That's gonna be very very hot. Passive heatsink might not last well.

Similar Messages

  • What temp for the CPU fan is dangerous

    I have a HP Pavilion P6404y which occasionally the screen goes black.  It appears that my computer is still running as the on light is still on, but when I hold down on the start button to shut the computer off it shuts off and when I turn it back on my screen is working again.  I was thinking that maybe my computer is getting a little hot and was wondering what temp is hazardous for the CPU Fan.  I download some software and it states when using my computer that the temp is almost 60C. 

    Your near the 62C max: http://www.overclockersclub.com/reviews/phenomii94​0/
    I am a volunteer. I am not an HP employee.
    To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
    The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
    (2) HP DV7t i7 3160QM 2.3Ghz 8GB
    HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
    Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Both Customs use Rosewill Blackhawk case.
    Printer -- HP OfficeJet Pro 8600 Plus

  • How to set the column order of a sealed column in a custom Content Type for the new item form NewDocSet.aspx?

    Dear SharePoint Developers,
    Please help.
    I need to know How to set the column order of a sealed column in a custom Content Type for the new item form NewDocSet.aspx?
    I think this is a "sealed column", whatever that is, which is  shown in SPD 2013 as a column of content type "document, folder, MyCustomContentType".
    I know when I set the column order in my custom Content Type settings page, it is correct.
    But, when I load the NewDocSet.aspx page, the column order that I set in the settings page is NOT used for this "sealed column" which is bad.
    Can you help?
    Please advise.
    Thanks.
    Mark Kamoski
    -- Mark Kamoski

    Hi,
    According to your post, my understanding is that you want to set the column order of a sealed column in a custom Content Type for the new item form NewDocSet.aspx.
    Per my knowledge, if you have Content Type management enabled for the list or library (if you see a list of content type with the option to add more), the display order of columns is set for each content type.
    Drill down into one of them and you'll see the option under the list of columns for that content type.
    To apply the column order in the NewDocSet.aspx page, you need to:
    Select Site Settings, under Site Collection Administration, click Content type publishing. In the Refresh All Published
    Content Types section, choose Refresh all published content types on next
    update.
    Run two timer jobs(Content Type Hub, Content Type Subscriber) in central admin(Central Administration--> Monitoring--> Review timer jobs).
    More information:
    http://sharepoint.stackexchange.com/questions/95028/content-types-not-refreshing-on-sp-online
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

  • [svn:fx-trunk] 5465: Now that padding set on a TextInput does not affect the inner textView, we need to add a custom TextInput skin for the TextInput a Spark NumericStepper contains .

    Revision: 5465
    Author: [email protected]
    Date: 2009-03-20 11:52:56 -0700 (Fri, 20 Mar 2009)
    Log Message:
    Now that padding set on a TextInput does not affect the inner textView, we need to add a custom TextInput skin for the TextInput a Spark NumericStepper contains. Jim ok'ed the addition of the new FxNumericStepperTextInputSkin.mxml class into the spark.skins and wireframe packaged.
    SDK-18275, SDK-19849
    Reviewer: Glenn
    Checkintests: Pass
    Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-18275
    http://bugs.adobe.com/jira/browse/SDK-19849
    Modified Paths:
    flex/sdk/trunk/frameworks/projects/flex4/src/mx/components/FxNumericStepper.as
    flex/sdk/trunk/frameworks/projects/flex4/src/mx/skins/spark/FxNumericStepperSkin.mxml
    flex/sdk/trunk/frameworks/projects/wireframe/src/wireframe/FxNumericStepperSkin.mxml
    Added Paths:
    flex/sdk/trunk/frameworks/projects/flex4/src/mx/skins/spark/FxNumericStepperTextInputSkin .mxml
    flex/sdk/trunk/frameworks/projects/wireframe/src/wireframe/FxNumericStepperTextInputSkin. mxml

    Revision: 5465
    Author: [email protected]
    Date: 2009-03-20 11:52:56 -0700 (Fri, 20 Mar 2009)
    Log Message:
    Now that padding set on a TextInput does not affect the inner textView, we need to add a custom TextInput skin for the TextInput a Spark NumericStepper contains. Jim ok'ed the addition of the new FxNumericStepperTextInputSkin.mxml class into the spark.skins and wireframe packaged.
    SDK-18275, SDK-19849
    Reviewer: Glenn
    Checkintests: Pass
    Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-18275
    http://bugs.adobe.com/jira/browse/SDK-19849
    Modified Paths:
    flex/sdk/trunk/frameworks/projects/flex4/src/mx/components/FxNumericStepper.as
    flex/sdk/trunk/frameworks/projects/flex4/src/mx/skins/spark/FxNumericStepperSkin.mxml
    flex/sdk/trunk/frameworks/projects/wireframe/src/wireframe/FxNumericStepperSkin.mxml
    Added Paths:
    flex/sdk/trunk/frameworks/projects/flex4/src/mx/skins/spark/FxNumericStepperTextInputSkin .mxml
    flex/sdk/trunk/frameworks/projects/wireframe/src/wireframe/FxNumericStepperTextInputSkin. mxml

  • What is the encryption method for the user's password?

    hi all,
    who knows what is the encryption method for the user's password?
    the password is 803004, and i get the encrypted string "D7EDED84BC624A917F5B462A4DCA05CDCE256EEEEEDC97D59A57930E06CF9781E022CC8E430FF04E"
    thanks,
    dan

    There is no default password for a guest user unless you've created one:
    (screenshot from the System Pref Guest User Pane)

  • What temperatures are acceptable for the CPU and Graphics card?

    I have Intel Xeon X5400 series CPUs and a Nvidia graphics card.  
    It is interesting to monitor the temperatures but only if you know what temps matter...
    What temperatures are acceptable for the CPU and Graphics card? 
    I was not sure if this is the document of choice for the CPU or not. I was not sure I was decifering it correctly either. 
    http://download.intel.com/design/xeon/datashts/318589.pdf
    Any one know what we should be watching for as far as what is too hot? 
    I have a ThinkStation D10.
    Did not see this in the user manual but could have missed it. 

    I found my specs:
    Intel(R) Xeon(R) CPU           E5405  @ 2.00GHz
    You are correct. An E series. 
    I was so focused on the upgrade to the X5420 that I forgot what the system came with. 
    So what should I set my sensor high value to on my sensor program that shows up on the panel (taskbar)?
    For the E5405 or the X5420? 
    SIDE NOTE: where can I get 2 E5420s or better cheap? 
    Not ready to give up my filters just yet. I live in a dust factory! 
    My girl friend sews really nice bags but creates sewing dust and fuzz. 
    And well there are natural fibers everywhere...
    So other than the the X5492 (150watts),  the X5482, X5472,  X5470, X5460, X5450 are all 120 watts.
    Like the bulk of the X series...
    The E5405, E5410, E5450, E5440, E5420, E5430, E5470, E5462, E5472 are all 80 watts.
    The L series seems to all be 50 Watts.  
     For many the other Processors see this:
    http://www.intel.com/products/processor/xeon5000/specifications.htm?iid=products_xeon5000+tab_specs
    Message Edited by VitalBodies on 12-06-2008 08:46 PM
    Message Edited by VitalBodies on 12-06-2008 09:03 PM

  • I am having trouble getting a numbers spreadsheet to hold different formats in the same column.  A column with a date formatted heading will not convert to $ for the cells below.   Any suggestions would help.

    I am having trouble getting a numbers spreadsheet to hold different formats in the same column.  A column with a date formatted heading will not convert to $ for the cells below.   Any suggestions would help.

    Hi Wayne,
    Thank you for this response.  I have tried this but when I start enterring $ amounts some, such as $6.00, go in OK others such as $4.00 appear as a date ie 4 Oct 12.  
    Kind regards
    Paul

  • Issues downloading the 5.0 software for the iPhone 3GS. Any suggestions?

    Issues downloading the 5.0 software for the iPhone 3GS. Any suggestions?

    Disable your firewall/security software.
    This is asked and answered many times each day.  The forum search bar is on the right side of this page.

  • I am updating os to 10.7.2 and it has stalled at 297.9mb for the last 20 mins, any suggestions?

    I am updating os to 10.7.2 and it has stalled at 297.9mb for the last 20 mins, any suggestions?

    Do you have a firewall operating that sets any kind of limits on downloads?
    You might try a restart of the Mac to see if something there is interfering, though not likely that is the issue.
    Have you tried the download at a different time of day when the internet is less busy?
    Others on here have had questions about slow servers and Apple opening Match up to something like 19 countries today...perhaps that has something to do with it...too much system load.

  • Are there release notes for the new Flex Ajax Bridge?

    Are there release notes for the new Flex Ajax Bridge?

    Hello,
    You can find the release notes
    here
    . The wiki page has been updated as well to point to the release
    notes document, in the Where can I find out more section.
    Thanks for noticing they were missing,
    Cristian

  • Custom Search Help for the field Equipment number

    Hi,
    I have enchanced sales order transaction and included a field Equipment number(EQUI-EQUNR).
    Here after pressing F4(Search help) standard search help is display.
    I have a requirement wherein, the standard search help should not appear and a customised search where a specific Equipment category type values should appear in the search help.
    Ex. Field equipment  category (EQTYP).EQUNR(Equipment Number).
    Please let me know how to work for the customised search help.

    Hi,
    You need to create a customized search help.
    [Elementary Search Help - Structure|http://help.sap.com/saphelp_nw04/helpdata/EN/cf/21ee38446011d189700000e8322d00/content.htm]
    [Creating Elementary Search Helps|http://help.sap.com/saphelp_nw04/helpdata/EN/cf/21ee5f446011d189700000e8322d00/content.htm]
    Then you need to attach the search help to the screen field..
    [Assigning Search Helps to Screen Fields|http://help.sap.com/saphelp_nw04/helpdata/EN/cf/21ee93446011d189700000e8322d00/content.htm]
    [Hierarchy of Search Help Call|http://help.sap.com/saphelp_nw04/helpdata/EN/0b/32e9b798da11d295b800a0c929b3c3/content.htm]
    regards
    Nitesh

  • What is a safe temperature for the CPU?

    My new MBP's CPU is running at around 55-65 degrees idle, and upper 70's to low/mid 80's when doing anything intensive. (According to iStat widget)
    I was wondering if this is normal or safe, as according to
    http://www.hardwaresecrets.com/article/366/2
    The max temperature should be 60.1 degrees Celsius
    Message was edited by: CCDwyer

    My pleasure. Thanks for the star!
    By the way, the temps you report are normal. Above ~65 C the fans speed to to provide more cooling (they idle at ~1000 rpm or ~2000 rpm depending on model, and have a max speed of 6000 rpm.

  • MSI 990FXA-GD80 voltage control over 1.44V for the CPU FX-8320

    Hi there!
    MSI 990FXA-GD80
    Can anybody help me with overclocking with this board? The voltage looks locked
    and can't push more than 1.44V.
    Any solution/fix?
    This does not work after 1.44V.
    Kind regards 

    I know this is a little late but over the last 3yrs I had much time to play with this board. 
    The board is a beast and its very tricky.  most people think this board has a locked cpu voltage
    but thats not true.  theres a couple ways to access the voltage.  the first way is control center.
    or if you clear the bios by pushing the clear cmos tab in back then when you restart it hit f1 to enter first time setup
    go straight to overclocking features 2nd down on the left side, go right to the vcore and it should show all the way to 2+ volts
    i believe. I currently have a msi 990fxa-gd80v2 board with a fx8320 cpu and i overclock it acording to the seasons.  as crazy as that sounds.  in the winter i can get 4.9ghz stable off it and in the summer i like to run it around 4.5 to 4.6ghz. 
    the board is very basic and practically overclocks itself. the voltage is way way off though.  at 1.62000 voltage the board is actually at around 1.46v to 1.49v no one really know exactly where until you use cpuz on it. i run it at 22x210fsb at 1.58000 to 1.62000v the ram is gskill 1600 ripjaw x  .  the set the ram voltage at 1.503v at ddr3-1600 in the drop down with a 10xht and 10nb multi and i unlink the timings so the board can autodetect the timings and it does it all basically for me.  i have a corsair h100i water cooler and the temps dont go above 46c under full loads, and the chipset runs at 48c no higher.  this is by far the best 990 board known to man.  i have owned 6 or 7 others from asus, gigabyte, asrock ect.  and its wipes the floor with them.  i also have a asrock 990fx extreeme 3 board with a 8120 and that board also overclocks well.  but not nearly as well as this board matter of fact not even close to the speeds of this board.  i will say though.
    i had to rma this board twice and now i have to rma it again but a fan header died on it for no reason and the fastboot option keeps giving me a 67 code display on the error and wont even post if i enable it.  i wont buy another board because there are none at the quality and overclock ability and stable.  i see that person saying the board dont overclock or it wasnt made to.  lol..  it was and oh  boy it is.  just be patient.  and dont ever waste your money on intel.  youll be paying for the name.  ill put my 8320 against any i5 and most i7's running the same hardware. I boot alot of machines and i see them everyday the intels are not anything they claim them to be.  in real home use computing the amd is overall faster.  I believe i have side by side machines booting at the same time and the amds are faster.   booting as far as format and installing windows.   

  • Using a custom login page for the portal

    Hi all,
    I'm currently doing a migration from Plumtree 4.5WS to Plumtree 5.0.4. In the current 4.5WS portal, I'm catering to 3 different login mechanisms due to time-lags in migration of my users' workstations. The 3 mechanisms are:
    1) Smart Card Reader on Windows 95 using TLS (uses a client side ActiveX)
    2) Smart Card Reader on Windows XP using SSL (uses client side ActiveX)
    3) Java PKI Card on Windows XP using SSL (uses server side scripting)
    To cater to the above, we've made customisations to login.asp and dologin.asp and also added a few scripts of our own.
    I now need to migrate these over to Plumtree 5.0 as well. I've thought of 2 ways to do this:
    1) Doing a custom view replacement of the Login View. This however has limitations as I'm not sure how the codes for the above 3 mechanisms will come in, especially 3), which involves server side scripting.
    2) Creating a custom login and exit page. This is probably a much more feasible solution in my case as it allows me to freely create my login pages and exit pages accordingly to cater for the above. However to do this, I need to be able to customize the Log In and Log Off links on the Portal Banner in order to point these to my own login and exit pages.
    Any ideas what is the best (or correct) way to do this?
    Thanks!
    Weng Kong Lee

    AFAIK only one login.jsp is called.
    But you can include logic into that one JSP file.
    If referer = portal.company.com THEN
    else
    This way you can create different look and feel for different virtual hosts.
    Login portlets have the disadvantage that https is not supported
    Ton

  • Standard WebClient UI business role for the CRM 7.0

    Hello Gurus
    where can we get the below mentioned thing....i tried in service market place but i did not get
    The predefined authorization roles are provided as attachment BP_CRM_ROLES.ZIP to the collective note of this SAP Best Practices version. Download and unzip the roles to your local directory
    after dowloading we need to uplaod in to PFCG roles
    (The purpose of this activity is to copy a standard WebClient UI business role and to assign a new authorization role to it. The WebClient UI business role is designed to centralize the authorizations, navigations, and content of the CRM WebClient UI.
    The business roles will be adapted to the Best Practices scenario scope)
    i am struck of ove here
    regards
    Sreeram

    Hi Sreeram,
    The roles you want to assign to the user you have to select for your scenario. The best practice role assigned to an user to navigate to the webclient. The other roles you assign to the user to give authoraization for your scenario. If you will go to C04 document you can get the standard roles which will be assigned to one particular user. For the standard user let sal SALES_MAN we assign the standard roles as peer the best practice as SAP_CRM_UIU_FRAMEWORK ,SAP_CRM_OR_ADMIN, SAP_CRM_OR_USER and BP_SLS_MANAGER. If you need other authorization for the user then copy the standard role and assign the authorization manually in transaction PFCG.
    Hope this will help you.
    Thanx
    Chinmaya

Maybe you are looking for