Standard PO with different delivery dates

Hai All,
Pls. clafiry my below query.
e.g. my PR Qty may be 30 PC (in one line item)
I want to create the PO in one line item with different delivery dates.
Like: 10 PC 15.12.2008
10 PC 20.12.2008
10 PC 25.12.2008
Rams

Hi,
In ME22N, on "Delivery Schedule" tab you can set manually on which dates the shipments should come.
If you want to have the right date for the PO item, you should carry out your settings accordingly to get proper results after MRP run. However, you cannot set MRP (as per my best knowledge) to create several Delivery date for one PR - MRP will create a separate PR for each different date.
Regards,
Csaba

Similar Messages

Combined delivery with different delivery dates:

Combined delivery with different delivery dates:
We are experiencing a problem when doing combined delivery from multiple orders of the same ship to party.
All the requirements are being met (for the order combination) accept the Delivery dates.
Sometimes an order Qty is confirmed on the 1at of a month , then the second order qty is confirmed on the 15th of the month. But when we want to make the combined delivery , the delivery dates differ and the user has to go into the individual order ans changes the dates.
Is there a way to make the combination, the system not taking in account the delivery dates? Because we have huge no. of orders to combine. Please guide.
Regards,
Mansur.

Dear Mansur,
I think there is no any solution exaclty map with your problem in standard SAP.
Better you control based on the MRP type, not sure. And also check with availability check and tranfer of requirments.
Thnx,
Pratik

Combine stock transfer orders with different delivery dates into 1 delivery

Hello,
In transaction VL10B, the system normally combines stock transfer orders that have the same ship-to-party and same delivery date (if the combination indicator in the customer master specific to sales and distribution is checked). My business requirement is to combine stock transfer orders that have the same ship-to-party but different delivery dates. Is this possible through standard configuration? Is there a user exit that can allow this?
At the moment the system is creating different outbound deliveries according to the delivery dates specified in the stock transfer orders.
Please advice a solution.
Regards,
Felipe

Felipe, please have a look at OSS note 386340, it may help to solve your problem about combining STO items with different delivery dates to one delivery (as I understand the code correction overwrites the delivery dates...).
Edited by: Csaba Szommer on Jan 21, 2011 5:06 PM

Delivery is pulling items with different delivery dates from sales order

hi all,
i have a sales order with two line items with different delivery dates(eg 1st and 21st). material availability date for them is different. when i tried to create the delivery on 1st it is pulling the 2nd item whose delivery date is on 21st.
where can i control this.
thanks in advance
harini

Hi,
let us take one example>materials A and B,
A delivery date is 22.01.2008(maintained in schedule lines in SO)
B delivery date is 30.01.2008(maintained in schedule lines in SO)
now i want to deliver material A on 22.01.2008
by default system will give you only material A in the item line
material B will not be displaced in the second line item
now i want to deliver material B on 30.01.2008
by default system will show me material B in delivery line item
if in case material A is not delivered then delivery will show you two line items
i.e., Material A and B
i think you have understood the difference
regards,
US

Users with different delivery dates

Hi ,
Two users entering a sales order with same master data of customer, material and quanty are having different delivery date at item level?
Any reasons?
Thanks,
Pramod

Hello Friend,
The problem could be stock could be less and the first order would have blocked that stock so for the second order based on Material Availability Date in Sales Document Type, Scheduling in Material Master MRP2 View and Shipping Point Picking and loading time it is giving a different material availability date based on all these parameters.

Partial Delivery in Sales Order with Different Delivery Dates

Dear All,
In Sales Order we need to specify the different delivery dates for the items ( Partial Delivery ).
Ex: If I add one sales order for 20 qty of an item today.I need to specify 5 nums to be delivered on immediately
and next 10 qty i need delivered on after 15 days and rest of the remaining qty delivered on after another 15 days.
How we configure in SAP B1 Sales Order.
Please guide me.
Thanks in advance.
- Rajesh

Enable 'Del Date' in Form Settings of the Delivery.
In the First Row, select the Item, Qty 5 and type Del Date Immediately
In the Second Row, select the Same Item, Qty 10 and type Del Date after 10 Days
In the Thrid Row, select the Same Item, Qty 5 and type Del Date after 15 Days

Purchase requisition to purchase order with different delivery dates

Hi, Could any body explaon me , when ever a Purchase order is created with ref to purchase requisition the delivery dates can not be split up .(system shows an error message : error in net px calculation).
Please revert back with your suggestions.
Regards
Bheema

Enable 'Del Date' in Form Settings of the Delivery.
In the First Row, select the Item, Qty 5 and type Del Date Immediately
In the Second Row, select the Same Item, Qty 10 and type Del Date after 10 Days
In the Thrid Row, select the Same Item, Qty 5 and type Del Date after 15 Days

Different Delivery Dates in STO's

Hi All,
At present in our system if the delivery dates is different in STO (Stock Transfer Order) it will create different Outbound Deliveries, In Practical Snenario, We are sending the stock from One Warehouse to One Store with different delivery dates,Our question is If We have created multiple STO's from One Warehouse to One Store with different delivery dates It needs to create only one outbound deliveryfor all multiple STO's.
kindly suggest how to create only one outbound deliveries for multiple STO's as We have same Vehicle for carrying the multiple STO's. from Warehouse to Store.
Note :- We are using the T-code VL10Fand VL10B for creating the outbound delivery against the STO'S.
Thanks & Regards,
Murali.M

Hi,
Go to customizing VTLA (copy control for deliveries). Then find at Header level the Source/Target that corresponds to your Replenishment Delivery.
And then go to Header Data transfer routine (I have routine 301 maybe yours is other) and put a Break Point in it. Then in VL10B select two STO's with different dates you would like to have their deliveries COMBINED and process with button "Background". The debugger should stop at your breakpoint.
manually replace LIKP-LFDAT for a common date (for example today) when debugging routine and see what happens.
This should result in a combined delivery with the date you specified in debugger
Best Regards,
Sebastián Ligueros
Alynea-MVC

Standard report(for open PO order items) with estimated Delivery dates

hi friends
i would like to know if there is any standard report(for open PO order items) with estimated Delivery dates on it.
thanks
alahari

ME2M (by material)
ME2L (by vendor)
ME2N (by number)
Use selection parameter WE101 for open GR
and scope of list EINT (scheduling lines)

Different Delivery Dates

Hi All,
I have a sales order for 100 qts. And th required delivery date given in the sales order is 30.05.2008.
But this order will be delivered partially.
Means on 30.05.2008 - 50qts, on 05.06.2008 - 40 qts and 08.06.2008 - 10qts to be delivered.
My client want for these three partial deliveries three different delivery dates should be there in the order. And also my client want the report that for this one order, there are 3 deliveries and for these 3 deliveries 3 delivery dates should be there in report.
How to configure this?
Please guide me.
reward points for helpful answer.
Regards
Ashis

Hi
Ashis
Please use the table VBEP-EDATU and check VBEP-WMENG not zero. This way u can consider the field in yr report and u will get the report as per yr requirement.
VBEP is table where u can see the schedule lines agaisnt sales order.
If this slove yr problem please mark the forum as Answer with full point to me.
Thx.

Has anyone with a delivery date of 9/19 phone left Memphis?

My tracking says that package is in transit. It has moved around Memphis a couple times with a Delivery date of 9/19. Has anyones package left Memphis yet?

Mine is going to Iowa and this is my current tracking info.

Same deliveries for different delivery dates on Po

I have a requirement
If we use standard SAP and have a purchase order with materials that have different planned delivery times, we are going to create multiple deliviers from the PO based upoon the delivery creation date calculation. Since we want to ship all of these materials on the same delivery , we have an issue.
Is there any workaround for this ? PL help me.
Thanks.

Hi,
If you have a different delivery schedules for a material with the vendor you can go for Scheduling agreement which is good option for this.
Because in PO if you maintain the delivery schedules in Item detail>Delivery schedule there is no check for this delivery dates.You can inward all the stock in a single delivery which don't have a control on that dates.
If you follow the Scheduling agreement then system will not allow you to post the stock unless the delivery date is valid.
rgds
Chidanand

Delivery split with different delivery types

Hi,
Ive got the following problem with delivery split:
In my order (type ZTA) I have two items with two different item categories (for example TA1 and TA2). For these two items two different deliveries with two different delivery types (for example item TA1 in LF1 and TA2 in LF2) should be created. For this I implemented the needed copy control and in the customizing of the order type ZTA I maintained LF1 as a default delivery type. When I deliver the order manually via Transaction VL01N, I have no problem, because the system delivers first the item which can be delivered with delivery type LF1. Then I have to start VL01N again, predefine LF2 as delivery type and then the other item will be delivered with LF2. But this doesnt work in the Batch Collective Processing with VL04, VL10A or even VL10Batch. The system cant deliver the order. And in none of these mentioned transactions I have the possibility to predefine a delivery type. I tried also a routine in the copy control on item category level where I want to switch to a different delivery type in case of the second item category. But it didnt work. And I couldnt find any other appropriate exit how to influence the delivery type on base of the item category. What cant be changed is probably that I will always have to deliver this order two times because the system wont be able to split the order in one collective processing and create two deliveries at once. That wouldnt be a big problem if I could predefine the delivery type for the second collective processing in order to get the second item delivered.
Is there anybody who can help me?
Kind Regards
Stephan

Hi,
thank you for your quick answer. That was a big help and I will do your suggested solution with the BDC.
But if I understand you correctly, you also didn't find a solution for this problem in the SAP Standard functions (without BDS)?
Kind regards
Stephan

Sales order Request delivery date map with PO delivery date

Hi
I have an requirement. While run the MRP to create PR from Sales order.
We need take the delivery date in the sales order to PO delivery date. How to configure
Pl advice
Regards,
Kumar

Check with your SD/LE functional specialist on whether this can be configured. Alternatively, you might insert a specific future date and update when the delivery date is known...Generally, however, one expects that someone wanting to buy something from us has a delivery date in mind...whether we agree to that date or can promise to deliver on that date is a different matter....

Cube with different reports data

Hi
We have 3 different Reports based on a Multi which has only one Infocube.
We have new design policy that any New different report that needs to be created should be based only on this Multi and all data should be loaded only into this only infocube on which this Multi is based.
So for the existing 3 reports,we have three different database views in source database.Fullload will be done from source every weekend(previous week's request will be deleted every week) of snapshot data into three different DSOs from these three different datasources.(Its new policy that every report should have its own DSO ).All these 3 DSOs should be connected to only one cube on which our reporting Multiprovider is based.So from these 3 DSOs,data will be loaded into cube in fullload every weekend(previous week's request will be deleted)
Now my question is:
1.when all the data is going to cube from three different views and DSOs(with different keyfigures but some same characteristics in 3 DSOs),how can our 3 different reports pick data that is relevant for it when all data is pooled together in one big cube?Doesnot aggregation happens?
(When a report is run,does OLAP processor goes into cube and picks only those keyfigures and characteristics in cube thats relevant for that report and by that way,avoids other data??)
2.I need to create one new report.For this I need to create one new view and one new DSO.So,data will be loaded from view to DSO and this DSO will be connected to existing cube(new dataflow until cube from source view).But our cube doesnot contain one keyfigure.It contains all other characteristics and keyfigures from DSO.
a)How can I add this new keyfigure from new DSO to cube without disturbing existing data in cube.I donot need to load historical data for this new keyfigure and new report.
b)I am going to transport this from development.So what care do I need to take while transporting changes to Production cube which contains lots of data and many reports running on it?
Thanks.

*1.when all the data is going to cube from three different views and DSOs(with different keyfigures but some same characteristics in 3 DSOs),how can our 3 different reports pick data that is relevant for it when all data is pooled together in one big cube?Doesnot aggregation happens?
(When a report is run,does OLAP processor goes into cube and picks only those keyfigures and characteristics in cube thats relevant for that report and by that way,avoids other data??)*
It will depend on what Key Figures you are displaying in your report. If a KF is coming from only 2 DSOs, data from those 2 DSOs will be displayed. And you are right in saying that OLAP processor will pick only releavnt KFs and Characteristics but it will not filter based on characteristic value e.g. if a characteristis is coming only from DSO 1 and not from DSO2, but KF is coming from both, so for the data in DSO 2 that characteristic will be displayed as #. If you want to filter data, you can put filters in the report.
Another good option can be to store the DSO name as a characeteristic in your cube, it might be helpful if you want to make a reprot based on data from a particular DSO, then you can put the filter based on DSO name.
*2.I need to create one new report.For this I need to create one new view and one new DSO.So,data will be loaded from view to DSO and this DSO will be connected to existing cube(new dataflow until cube from source view).But our cube doesnot contain one keyfigure.It contains all other characteristics and keyfigures from DSO.
a)How can I add this new keyfigure from new DSO to cube without disturbing existing data in cube.I donot need to load historical data for this new keyfigure and new report.
b)I am going to transport this from development.So what care do I need to take while transporting changes to Production cube which contains lots of data and many reports running on it?*
You are adding a new KF which is coming only from new DSO, so you do not need to worry about a lot of things, you can move your changes to procudtion and load data from this new DSO. Data which is already there in the cube will not be impacted.
Regards,
Gaurav

Standard PO with different delivery dates

Similar Messages

Maybe you are looking for