Standard PO workflow giving error due to Release coe is not getting passed from event

Hi Team,
I am getting the below error while processing the Standard workflow for PO.
I think its due to the Release code is not getting passed from Event to workflow.
Can you please sugest from where the release code is getting fetched before triggering the event.
Error processing following event linkage:
BUS2012 RELEASESTEPCREATED WS20000075
Following error occurred:
SWF_RUN 594
Message text:
Import container contains errors (are any obligatory elements missing?)
Event container appended as attachment.
Event linkage not changed.
Event stored temporarily.
Events can be redelivered via event queue
administration (transaction SWEQADM)

Hi
Please check threads, response by Fernando Carames, ( Jul 19, 2007 2:37 PM): http://scn.sap.com/thread/483005
Or by Trevor Ticehurst on Oct 9, 2008 3:39 PM at: http://scn.sap.com/thread/1080411
OR
http://www.sapfans.com/forums/viewtopic.php?f=26&t=297786
All these mention certian notes which may be helpful.
However, it is important to first ensure that the release startegy is configured and working properly (check with your MM con)
regards,
Modak

Similar Messages

Error B839FBD8 on officejet 6600 can not get pass this can someone help please

Hi i got a Hp officejet 6600 when i turn it on it start to load when it goes to ERROE B839FBD8
can someone help me thank you Robert

Hi @Robert21,
Welcome to the HP Support Forums! I see when you power up your HP Officejet 6600 you get an error message on the front panel 'B839FBD8'.
First I would like you to perform a hard reset on the printer:
1. Unplug all cables and memory cards from the printer. Unplug the power cord, directly from the back of the printer while the printer is still turned on.
2. Unplug the other end of the cord from the power source.
3. If there is a power module on the power cord, disconnect one end and reconnect it.
4. After 60 seconds, plug the cord directly into a wall outlet (not a surge protector or battery backup as they can cause the printer to lose basic functionality over time).
5. Plug the power cord into the back of the printer.
6. The printer should automatically power back up. If it doesn't, turn it on with the power button.
7. Try making a photocopy (if your printer is an all-in-on printer) before connecting any other cables to the printer.
8. Connect any other needed cables to the printer.
Are you still seeing the error message? If yes, please call our technical support at 800-474-6836 as it may be the printers hardware. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Thank you,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

HT4623 my iphone 4 ios 6.1.3 giving error while activating "activation request could not be completed"

my iphone 4 ios 6.1.3 giving error while activating "activation request could not be completed"

ysreddy112 wrote:
my iphone 4 ios 6.1.3 giving error while activating "activation request could not be completed"
See this discussion.
https://discussions.apple.com/message/21189708

In PO Release "PO release effected" is not getting executed

Hi All,
           I am working on PO Release WorkFlow.
when I execute the WF of PO release, its executing the first task "please release PO" but when I relase the PO from my work place the second step "PO release effected" is not getting executed. I could not found why this is happening.
Please help me in this issue.
Thanks.
Ranganadh.

Thank You Adithya,
                                 I have copied the standard one i.e. WS20000075. I am executing the workflow directly from the Workflow builde by giving the PO number and release code.
with this in my business workplace I can able to find the workitem.
         I am releaseing the PO from the Workplace. After releasing the PO also I am getting the status of the workitem as "Inprocess".
         In workflow log I found that only first task (PO Released) has been executed the subsequent steps are not getting executed.
         Would be there any settings are missed out??
Thanks.
Ranganadh.

Purchase Req & Standard PO - Price is not getting Defaulted from Price List

Dear All,
Hope you are doing good!!!
We are implementing R12.1 for one of our client. This query is pertaining to the Advance Pricing with Purchasing. Infact client wants to default the Purchase Requisition and Standard Purchase Order Price from Price List.
I have done entire setup and defined ASL for this reason. But still price is not getting defulted from Contract Purchase Ageerement.
What could be the reason. Its an standard fucntionality but still its not picking up.
I would really appreciate if someone could help me on this. Its URGENT.
Thanks in Advance.
Thanks & Regards,
Aditya

Let us go through the steps involved in integrating Advanced Pricing with Purchasing so that we know if we have missed anything.
1. Create Price Lists in Advanced Pricing.
2. Setup Profile Options in System Administrator responsibility:
QP: Licensed for Product - at Application: Purchasing level = Purchasing.
QP: Pricing Transaction Entity - at Application: Purchasing level = Procurement
( Site level - ‘Order Fulfillment’ )
Profile option can be set at site, application, and user levels.
QP: Source System Code – at Application: Purchasing level = Oracle Purchasing
( Site level -- ‘Oracle Pricing’ )
Profile can be set at site and responsibility levels.
QP: Item Validation Organization - at Application: Purchasing level = null
( Site level -- specified in Financial Options )
Profile option can be set at site and responsibility levels.
3. Add item to the Price list Advanced Pricing ->Price Lists -> Price List Setup.
Enter the item/price/dates etc.
4. Create Contract Purchase Agreement.
5. Create Approved Suppliers List. In the Source Documents, select the Type as Contract and reference the Contract Agreement Number.
Create the Sourcing Rule and add the Rule to the Assignment Set.
6. Create the Standard Purchase Order referencing the Contract Purchase Agreement in the Reference Documents.
The Price listed should be defaulted from the Price Lists.
Cross-Check the following steps and let me know if it still fails and we can try to resolve from then on :)

Release strategy is not getting Trigerred for Multiple Plants in PO.

Dear gurus,
I have a Release strategy which is working Fine when I create a PO with Same Plant in line items.
But My release strategy is not getting trigerred when I have Different Plants in Line items.
I have Maintained all the Plants in the characteristic Values of Plant.
Why does the RS work for Single Plant & doesn't work for Multiple Plants in the same PO.
Is there any SAP Note applicable to this? Pl Suggest.
Thanks guys
SN

i got your point but i will again say the same thing that for item level field system is not able to block the po if there are multiple line item in RS and that too with different values against same char as system picks only 1 value and it sends that value in RS to cross check wheteher this po needs to be blocked or not .
now in your case system is getting multiple values against 1 field that is plant so now system is not able to send 1 in backend and hence it sends blank value in back end so system dosent blocks the po
even if you use material group or any other item level field system is going to behave that way only that is it will not be blocking the po

SP 2013 Running Workflow giving Error - Sorry Something went wrong

Hi,
We have publish workflow running on a document and we need to cancel/ terminate it.
On the workflow Page we can see under the "Running Workflows" , the workflow is running. But when we click on that it gives the Something went wrong error message. As we are not able to goto the workflow status page on UI, we dont get option to
End the workflow.
To Cancel the workflow we tried following things -
1. Powershell command to get the workflow object and cancel it. But using the powershell command- $listItems.Workflows does not give the instance of this stuck workflow. If we start new workflow on that item , it will get added to the count but this stuck
workflow does not come under its count. So we are not able to get its instance using powershell and cancel it.
2. Using client side programming we tried directly passing the workflow instance name and terminate it but it gives the exception that "given key was not present in the dictionary"
string workflowGuid = "91ee281b-3938-45a5-9bb2-8bd128bfa90c";
var workflowServicesManager = new WorkflowServicesManager(clientContext, clientContext.Web);
var workflowInstanceService = workflowServicesManager.GetWorkflowInstanceService();
WorkflowInstance instance = workflowInstanceService.GetInstance(new Guid(workflowGuid));
workflowInstanceService.SuspendWorkflow(instance);
Please let us know how to get rid of this stuck workflows.
prashant

Hi Prashant,
According to your description, my understanding is that you want to cancel the stuck workflows in SharePoint 2013.
If the workflow is designed in SharePoint, I recommend to go to the Workflow Settings of the document library, click Remove, Block, or Restore a Workflow to remove the workflow with the stuck instances and then republish the workflow from Designer to SharePoint.
Or you can use the code in the link below to cancel all the workflow instances to see if the issue still occurs:
http://www.codeproject.com/Articles/679628/Easiest-Way-of-Cancelling-All-S
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Workflow giving error at execution

Hi all,
I am referring Ginger Gatling blog to create simple workflow
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0bbdb3c-d640-2a10-d3b2-e4d9b90536a6
After activating my workflow (workflow is to display material asking user action 'Yes' or 'No') at the time of execution it gives this error
"Task started under work item ID 4017 (Current Status: Error)"
i did basic configuration to set up number range (via SWU3) for workflow also i ensured each and every step is same as mention in blog also all objects are activated ,
i am doing this activity in Development Server and my system is SAP ECC 5.0
So i am not getting, where is the problem?
Plz help....
thanks

Hi Chidanand,
i got following error analysis from TCode 'SWIA'
Work item 000000004018: Object FLOWITEM method EXECUTE cannot be executed
Error when processing node '0000000004' (ParForEach index 000000)
Error when processing node '0000000004' (ParForEach index 000000)
Error when creating a component of type 'Schritt'
Error when creating a work item
Unable to determine work item type for step at node 0000000004
Error when loading task
Error when starting work item 000000004018
Error within method CL_SWF_RUN_WIM_FACTORY->CREATE_VIA_WFM
Task definition '' not found
Error when processing node '0000000004' (ParForEach index 000000)
What is this? any important steps that i missed?

Workflow WS00400012 Release for Payment not getting triggred

Hi,
As mentioned in the help docs we have done the following settings for Release for payment, yet the Workflow is not getting triggered.
SPRO->Financial Accounting (New)->Accounts Receivable and Accounts Payable->Business Transactions->Release for Payment
Create Workflow Variant for Release for Payment
XX01     WS004MSBT Payment release
     Workflow var.   XX01
     Currency        INR
     WF var.name     WS004MSBT Payment release
     Prelimenary posting release
      Release from    1.00
      Subworkflow     WS00400012
     Payment release
     Release payment          X
     Creater permitted          X
      Payt release    1.00
      Pmnt rel.var.   CC
Assign Company Code Workflow Variant for Release for Payment
     Compamy Code     Workflow Var     WF Var. Name
     XXXX     XX01     WS004 Payment release
Define Release Approval Groups for Release for Payment
     0001     Vendor A
     0002     vendor B
     0003     Vendor C
     0004     G/L accounts
Define Release Approval Paths for Release for Payment
     0001     Vendor high
     0002     Vendor middle
     0003     Vendor low
     0004     G/L accounts
     0005     Other
Assign Release Approval Paths for Release for Payment
     Workflow Variant      Doc. Type      Release Group     Approval Path
     XX01     KR     0001     0001
     XX01     KR     0002     0002
     XX01     KR     0003     0003
     XX01     KZ     0001     0001
     XX01     KZ     0002     0002
     XX01     KZ     0003     0003
     XX01     SA     0001     0001
     XX01     SA     0002     0002
     XX01     SA     0003     0003
Assign Release Approval Procedure for Release for Payment
     Wrkf      ApPath     Amt To            Curr     Rel levels     Swf Amt rel     Swf pnmt rel
     XX01     0001     5,000.00      INR     1     WS10000052     WS00400011
     XX01     0001     10,000.00     INR     2     WS10000053     WS00400021
Define Relevant Document Types for Release for Payment
     Workflow Variant     Type
     XX01                       KR
     XX01                       KZ
     XX01                     SA
Define Users with Authorization to Payment Release
     XX01     1     1     5,000.00     INR
     Assigned Authorization Object
     Production manager
     XX01     1     2     10,000.00     INR
     Assigned Authorization Object
     Comp Admin
Carry Out Function Enhancements for Release for Payment
Define Payment Block Reason for Payment Release
           Free for payment
     *     Skip account
     A     Locked for payment
     B     Blocked for payment
     I     CML:InvestorContract
     N     Postprocess inc.pmnt
     P     Payment request
     R     Invoice verification
     V     Payment clearing
We are using Tcode FV60 for Park Vendor invoice
We are trying to post the Document thru Tcode FBV0 , But the Post field is grey and system shows error: func not possible as document is in not released. The Workflow is not getting triggered. And hence its not possible to release the doc.
The workflows have been activcated
We have done Eventlinkage and activated it.

In future when you post question please do some formatting. It seems like a novel.
Have you checked in SWEL whether the event CREATED of Business Object BSEG getting triggered. I hope you have activated the linkage between event and workflow from PFTC or SWE2 transaction code.
Thanks
Arghadip

Workflow not getting triggered from MM01

Hi,
I understand there is a similar post but the solution is not so clear there.
I wish to trigger a workflow whenever a material is created using tcode MM01.
For which i am using BUS1001. (In the header data > start events tab > BO/BUS1001/CREATED binding exists and activated)
whenever i am creating a material using MM01, and check the trace in SWEL i am getting the following info:
BUS1001006     VIEWCREATED     25.03.2011     13:00:12          @AI@     No receiver entered
BUS1001006     CREATED     25.03.2011     13:00:12     WS99900237     @5B@     SWW_WI_CREATE_VIA_EVENT_IBF
Can someone please help where to enter the receiver.
regards
abhishek

Hi sanju,
I have created the event as per your suggestions but the workflow is not yet triggered from mm01.
the event stack trace is as follows :-
BUS1001     CREATED     28.03.2011     08:28:42     WS99900237     @5B@     SWW_WI_CREATE_VIA_EVENT
BUS1001006     VIEWCREATED     28.03.2011     08:33:03     WS99900237     @5B@     SWW_WI_CREATE_VIA_EVENT_IBF
BUS1001006     CREATED     28.03.2011     08:33:03     WS99900237     @5B@     SWW_WI_CREATE_VIA_EVENT
BUS1001     CREATED     28.03.2011     08:33:03     WS99900237     @5B@     SWW_WI_CREATE_VIA_EVENT
Linkage is activated in SWE2 and the receiver FM is SWW_WI_CREATE_VIA_EVENT.
still unable to get the workflow triggered.
Secondly as per SAP suggestion the BO BUS1001006 should be used for std material master. But while i enter BUS1001006 no such methods are available in F4. (refer atttachment)
I have checked in the BOR and i see that BUS1001006 is released and active.

What does error message "...disk could not be read from or written to."?

Hi- I have a new 5G ipod w/ video, and I have been unable to load anything on it. Actually, after several tries, I got a few podcasts loaded, but that was after many attempts.) I keep getting the error message +"Attempting to copy to "My ipod" failed. The disk could not be read from or written to."+ I've done the 5R's (several times) but no luck. Is there anything else I can do or do I just have a bad disk? Thanks...

Have you had a chance to look at this troubleshooting page? It may be of some help: "Disk cannot be read from or written to" when syncing iPod

Release PR Should not get deleted in md51,planning mode 3

Hi all,
We are facing a problem in MRP run taken through transaction code MD51. This Problem (as explained below) will occur when MRP control parameter for Planning Mode will be set to u20183u2019 (Delete and recreate planning data).
During normal course, if MRP control parameter for Planning mode is set to u20183u2019, system deletes all open PR & Planned orders & creates new PR & new planned orders.
But in our business scenario, where we have release strategy for MRP generated PR, even these released PR get deleted. This results in re-analysis & releasing of MRP generated PR which itself is a tedious & time consuming task.
We are looking for a solution where PR will not get deleted during MRP.
Thanks
Sukumar
Edited by: skumar kalame on Nov 10, 2008 1:59 PM

Hi,
The planing time fence is maintained in MRP-1 view of the material in workdays. You can also have this defined in the MRP group. But the value in material master takes precedence over MRP group.
Use - It is a kind of safety fence which is used to protect any automatic changes to take place for firm order proposals during MRP run.
Depends on - Firming indicator needs to be maintained for the MRP type. This can be set in customizing for the MRP Type. This basically specifies how you want to firm the order proposals. Please note there are 5 types of firming
The SAP help for firming type reads as below:
firming type 0
The system does not firm procurement proposals automatically.
firming type 1
Procurement proposals that move into the planning time fence are firmed automatically, as soon as their date lies at least one day before the end date of the planning time fence. The date of new procurement proposals that are created in the planning time fence is displaced to the end of the planning time fence. These new procurement proposals are not firmed.
firming type 2
Procurement proposals that move into the planning time fence are firmed automatically, as soon as their date lies at least one day before the end date of the planning time fence. The system does not create any new procurement proposals within the planning time fence; that means, the system does not balance the shortage situation in the planning time fence.
firming type 3
Procurement proposals that move into the planning time fence are not firmed automatically by the system. All procurement proposals that are necessary for requirements coverage are displaced to the end of the planning time fence.
firming type 4
Procurement proposals that move into the planning time fence are not firmed automatically by the system. The system does not create any new procurement proposals within the planning time fence; that means, the system does not balance the shortage situation in the planning time fence.
If helpful award points
Regards,
Vivek

Workflow not getting triggered from Action definition in CRMD_ORDER

Hello Experts,
I have created a workflow which should send mail to partner team in a Change Request.This workflow should be triggered when a particular Zaction is performed on the CR.Zaction is created properly and my workflow is also assigned to it.I have also followed OSS note-733675 and created a workflow container with name "BUSINESSOBJECT" to get the application data into my workflow when the action is performed.My workflow is a background processing one.
I have tested it separately by providing GUID foreground and it works perfectly fine and mail is sent to partner team.But when i perform the action,mails are not getting triggered nor the workflow.I am not even able to check the logs.I am not even able to know if all the action has triggered my workflow.Kindly help.Would appreciate your contribution.
Regds
VLP

Please check in SWI2_FREQ whether the Workflow is really getting triggered.
Thanks
Arghadip

Workflow not getting triggered from Z inbound FM

Hi
I have created a simple workflow with start events
Object Type IDOCAPPL EVENT - INPUTERROROCCURRED
activated the binding and activate the linkage
also in the idoc inbdound FM i put workflow_result = 99999 also added the object and the start and end event in process code link
however the workflow is not getting triggered do i need to trigger it manually using swe_event_create....
what is the miostake

Hello,
Even if the event linkage is configured correctly, you have to trigger an event with the FM swe_event_create to run your workflow.
You have a transaction SWU0 that can simulate an event => then you can check if your event linkage is correct.
Please reward if useful.
René

Sapinst Giving error due to incompatible j2re.-- Urgent!!

Hi Friends,
We are installing ECC 6.0 on Red Hat Enterprise Linux 5.0,
Can you please tell us which version of jre we needs to be installed?
Because on sun.java.com, we tried to download j2re, but we could not find out for Red Hat Enterprise Linux 5.0,we are getting j2re of prior version.
Our OS guys have instaled the java from os cds, but when we are trying to run sapinst from the server, it is giving following error:
"guiengine: no GUI connected; waiting for a connection on host <host_name> port 21200 to continue with the installation"
Is it problem due to non compatible j2re?
Can you please give me some recommandations?
Any help will be appreciated.
Thanks,
vishal

Hello,
Required java version is
SUN JSE 1.4.2
IBM JSE 1.4.2
check this link for more information
https://websmp202.sap-ag.de/~form/handler?_APP=00200682500000001303&_EVENT=RELEASE&00200682500000002804=01200615320900001296&00200682500000003818=JSEPFM
before starting sapinst set environment variable
set env JAVA_HOME <javapath>

Standard PO workflow giving error due to Release coe is not getting passed from event

Similar Messages

Maybe you are looking for