Standard Price in Material Ledger

Dear Gurus,
On one hand we need to update on finished products (manufactured) a standard cost estimate (CK11N or CK40N) in order to analyse variances on the corresponding production orders (during period en closing with KKS2 transaction), on another hand, because we are implementing material ledger component, we would like to update the standard price of these finished products with the periodic unit price (PUP) with CKME transaction.
The problem is that the system returns an error when we try to release the price with the PUP,
CKPRCH "A current or future standard price exists for material &".
Could you help me ? Thank you very much
Christophe

Hi
I suspect standard price can only be saved once for any period. You can make use of the other price fields in the material master to store different prices
Thank You,

Similar Messages

How the System calculate GR/IR Prices in Material Ledger

Dear All,
Please any body help me regarding: How the prices calculation happen during the Goods Rereipt (GR) & Invoice Receipt (IR) prices in Material Ledger same period and next period. Exampls as follows,
If one material GR happened February, 2011 with Rs 100/- and IR happened March, 2011 with Rs 110/-. This difference Rs 10/- how it will be effected in during the two periods.
What will be impact of both periods if runs Material execution at end of the month. For March, 2011 how the material prices calculated & what basis.
Plese help me with above example.
Regards
Bhaskar.

Hi Bhaskar ,
At the time of GR .. in standard costing .. the accounting entries are
Inventory   -
Dr 100 ( Std Price)
Price Diff         -
Dr      10
GR/IR -
Cr 110 ( Invoice Price)
At the time of IR .. the entry is
Gr/IR -
Dr   110
Vendor -
Cr 110 .
Hence , the price difference is taken in accounting and in ML run in the month GR happens....................
Now , how ML run post the amounts in GL and account determination logic.. refer OSS Note : 908737 - Post Closing in Material Ledger
Regards
Sarada

Transfer price without Material Ledger

Dear Expert,
I am not using material ledger.but how i will handle transper price without material ledger
I am going to do stock transfer of FG stock from Plant A to plant B.
Standard price in plant A is 10 rs and Plant B 15rs
FG stock in Recieving plant B will debit !5rs and sending plant credit with 10rs and difference of 5rs will store in Price difference a/c.
M i correct with above entry?
In that case how to handle transfer price?.
regards
RR

Hi Raman
No Trf Price possible w.o ML... No work around possible
What are you trying to achieve... Can you detail it.... For sure, you cant maintain multiple valuations for same mat w/o ML
br, Ajay M

Standard price of material to be included in pricing procedure

Hi Gurus,
Can I include the standard price of material from material master in my pricing procedure? If yes, how? Also, I want to tax 7% of this material in the pricing procedure. Can I configure a condition type this way?
Thanks,
Paul

HI John,
         1. Please maintain the condition type VPRS in your pricing procedure, the standard cost from Material master will come in to your pricing procedure.
        2. If you want to maintain tax in your pricing procedure you need to maintain Tax related condition type Ex: MWST and you create condition record for that condition type in VK11
        Define Tax procedure and assign to country (Please take help of FI people)
        Maintain Taxcode at FTXP
I hope it will help you,
Regards,
Murali.

Process will not be created with zero standard prices in material master

Hi,
I have two type of material;
1. In process material say A1
2. Finished Goods say B1
Both materials price control are standard price. I do not run costing. So , after creation of material master , standerd price has to update through MR21 in the account1 tab before start production .
Suppose, if I forget to update standard price in material master and prepared process order, it will carry zero value of production cost.
Hence, I want to restrict the creation of process order with zero standard prices in the material master.
In order words, as long as standard price will not be updated after creation of the material master, user will not be allowed to create process order, if wrongly try, system will give message u201Cwith zero standard price creation of process order will not be allowedu201D.
Please let me know either standard configuration or name of User exit or Badi.
Regards,
Amit

Hi,
You need to use BADI: workorder_update.
Method: At release.
check MBEW-STPRS field in the code ..and flag error and reject error if STPRS = 0.
Regards,
Santosh Sarda

Standard Price in material master and MBEW

Hi
We have unique problem. The currency was setup with out decimal places due to some valid reason. Due to which STANDARD PRICE in MATERIAL MASTER looks alright (lets say 1000) but in MBEW(field STPRS) it is 10.
I would like use value which is in Material master for calculations in ABAP program. How can i achieve this? Is there any function module for the same so that I can convert value in MBEW-STPRS to value in material master.
Thanks in advance.

Hi ,
Try to use the following FM's:
CONVERT_MATPR_TO_MBEW_MTPER
use the BAPI "BAPI_MATERIAL_GET_DETAIL" and take the price from the Export parameter MATERIALVALUATIONDATA. This parameter points to the structure BAPIMATDOBEW which has all the material price details like :
Price control indicator
Moving average price/periodic unit price
Standard price
Price Unit
Currency Key
ISO code currency
Hope this solves your problem.
Thanks,
Greetson

Issue with Standard Cost estimates / Material Ledger

Background:
We have been using SAP for the last 5 years with Material Ledger active. Due to a number of reasons, we have not revised its standard cost estimates from 2001 till now. This means that at month end, we do not mark and release prices as recommended, nor do we mark prices and use dynamic release.
What Happened:
A new material called PFSW3 was made. This is a FERT. Before production
could start my team released the standard cost estimate for this material. Production was now able to proceed without problem. Then, when the time came to sell the material (VF02), SAP again raised the error 'cost estimate not found'. On checking the standard price in MM03, we discovered that the future cost estimate was missing. So we created and marked a new cost estimate in the middle of February 2007.
Problem:
When the first sale took place, SAP released the marked cost estimate and posted a Price Change document to adjust for the new standard cost. I understand this was due to dynamic release. Now, when month end came, the system settled all the production orders of material PFSW3 but did not do multi level costing on it.
Internal Investigation:
My team has determined that the material PFSW3 has price determination 2 set by mistake. All our other production materials (HALB and FERT) are
set to price determination 3 in the material master (accounting view).
Questions:
To sum this situation up,
we need to know why the material PFSW3 was not marked closed in its period status (CKM3) at the time of closing through CKMLCP?
What are the implications of not closing this material in Feb 2007 (current period status is showing 'Quantities and values entered')?
How can we close this material this month?
The future cost estimate is again missing for PFSW3 in March 2007 and I
fear we are going to face more problems as this material is sold to customers.
Please respond this is an urgent issue.

Dear Shumyl,
Please, have a look at Note 645083 - Material period status set to "Closing Entry Completed" that might help to closing your material in previous period.
Hope it will be useful.
Regards,
Flaviano.

Frozen price in material ledger

Dear all,
I need to have some informations about frozen price functionality in material ledger.
In particular:
- what is frozen price?
- where in customizing it is set?
- what is the system behavior using frozen price during production order confirmation?.
Kind regards
Flavia Borselli

Hi
I suspect standard price can only be saved once for any period. You can make use of the other price fields in the material master to store different prices
Thank You,

How to view previous standard price in material master?

Dear expert,
in material master Costing tab 2, i can view the current and future cost estimate price. but i want to view the previous month standard cost estimate price in material master?
For these, is there any configuration setting needed?
Thanks for advance

Hi
When you re-release a Std Cost - The Future cost would become the CURRENT cost and the Existing curent cost would become the PREVIOUS cost.... You can then see the Previous cost estimate in material master
br, Ajay M

Why can't I create a report for standard price by material

Any ideas? All reporting I have tried in SQO1 and even in SE16 returns 0 value for standard prices?
Firstly why is this? and secondly is there another way I can pull a report by material showing standard price?
Points awarded, many thanks

hi,
In MM60, u can get report for materials having standard & moving average price based on ur input in selection screen like material,plant,material type,material group & created by only. As of my knowledge,
there is no option to get list of materials with standard price in std.SAP.
There are two options to generate report for materials with standard price.
1. It is better go for customization . selection screen must contains price control field. if u enter price control like 'S' or 'V' in intial screen , report is generated.
2. create a ABAP query for this.
I hope this info is helpful to u.

Historical moving average price in material ledger

Hi SAPGURUS,
Every Month when doing the Month-end closing, system re-calculate the moving average cost in material ledger . Is there a way to get this information for all plant, all model and download to the EXCEL.
Could you please tell if we can the information from any database table.
Thanks and regards,
Priyajit

Hi,
Look at the following table data MLCRP for price changes. MLCR is the basic material ledger table. There are other ML tables that you may need to refer to: MLCRF and MLPPF.
Cheers.

Negativ Standard Price in Material Master Record

My customer (a cement producer) purchase a rohmaterial (bone) and get mony for it, so that the quantity on stock is positiv but the total-value negatic;
--> standard price negativ.
Do somebody have a solution???

Hi ,
Try to use the following FM's:
CONVERT_MATPR_TO_MBEW_MTPER
use the BAPI "BAPI_MATERIAL_GET_DETAIL" and take the price from the Export parameter MATERIALVALUATIONDATA. This parameter points to the structure BAPIMATDOBEW which has all the material price details like :
Price control indicator
Moving average price/periodic unit price
Standard price
Price Unit
Currency Key
ISO code currency
Hope this solves your problem.
Thanks,
Greetson

Changing standard price in Material Master.

Hi Gurus,
Can anyone please tel me in material master Accounting1 view,is there any way to change the standard price field immediately,once its created?When I go in change mode the standard price field is disabled.
Thank you all in advance.
T6

Hi,
Use MR21 Tcode and change the moving average price if u have a stock means no problem bcaz in the OBYC T code Cost (price) differences- PRD u have to give the G/L account and that value goes to that account. System Does not allow to change the price in MM02 Transaction. U must do it in MR21 only.
Regards,
Venkatesh
MM consultant

Low market price using Material Ledger for FG

Hi dear Experts,
We are using Material ledger for valuating 1 FG material with out quantity structure and its goning well but in the opening of a new plant after the actual costing calculation with have to adjust the actual cost to the low market price if this is low than actual cost of the month, do you know which steps I have to follow to make this happen I read something about parallel valuations and determination of lowest cost but how I can Carryout this to inventory valuation?
Regards

Hi Ganesh thanks,
the market priceI have to maintain on one of the prices available in the material master, this is necessary in addition to any configuration to use the mrn0?
and just a doubt this could re-valuate the inventory for the closing period? and the difference as I read its posted to the COGS account, on the next period or in the closing one?
thanks a lot
regards
Omar

Want to update Moving or Standard price from material master to ***.Value ?

Hai Experts,
As per Subcontract Logic, 1.1 % of the standard price should be update in J1ID Asseable value..
so I need to update Standard price value should be automatically update in Assesable value whenever it price changes..
Kindly guide me

Hi,
I think its not possible to shiftf from th MAp to J1Id assessable value.
Need to maintina in the field place of J1ID.
Regards,
Andra

Standard Price in Material Ledger

Similar Messages

Maybe you are looking for