Standard Queries for MM

Please send me the link where i can find standard cubes,.....Queries for Inventory and Purchasing.... I think this is the link for inventory management please correct me if i am wrong. Pleasee send me the link for puchasing...billing, shipment,
http://help.sap.com/saphelp_nw04/helpdata/en/fb/64073c52619459e10000000a114084/frameset.htm
Regards
Naga
Message was edited by:
naga yadavalli

Hi Naga,
You can start looking at the business content from this link:
http://help.sap.com/saphelp_nw2004s/helpdata/en/3d/5fb13cd0500255e10000000a114084/frameset.htm
Here you can also use the search box (upper right) and in the dropdown choose BI Content. Start looking at Supply Chain Management to find the sub areas for Procurement, Manufacturing and Inventory Management.
You can also find the best practices for some modules here:
http://help.sap.com/bp_biv170/html/bw.htm
Hope this helps...

Similar Messages

Standard Queries for CFM module

Hello Experts,
I m implementing the CFM module standard objects. Now i want to know what standard queries are available for CFM.
In business content i can find standard queries for only Analyser.No queries for Transaction Manager are available.
can anyone help me know if some standard queries are available for CFM in Transaction Manager.
thanks in adv.
Bhavna.

Attached; sample bridge, routed and one arm mode configs as well as config quickstart for ace 4710
http://preview.cisco.com/en/US/products/ps7027/products_installation_and_configuration_guides_list.html')">http://preview.cisco.com/en/US/products/ps7027/products_installation_and_configuration_guides_list.html

List of Standard Queries for SD, MM

Hi Experts,
Please provide the links for the list of Standard Queries for SD and MM modules.
Will asign the points surely...
Thanks,
Sujeet

Hi Sujeeth,
Check the follw link for SD
www.help.sap.com/saphelp_nw70/helpdata/en/ce/27920ede2111d2acb70000e829fbfe/content.htm
And for MM
www.informit.com/articles/article.aspx?p=664660&seqNum=2 - 35k
www.help.sap.com/saphelp_nw70/helpdata/EN/d2/cb415f455611d189710000e8322d00/content.htm - 20k -
www.help.sap.com/saphelp_pserv471/helpdata/EN/f9/cc9138e4a0341fe10000009b38f8cf/content.htm - 7k -
Regards,
Vamsi Krishna chandolu.

Standard Queries for SAP SCM - TM

Hi Experts,
Can somebody provide me with links or details about standard Business content queries that SAP provides for BI integration with SAP SCM - Transport Management ? I tries searching SDN and also help.sap.com but couldn't get.
Thanks in Advance,
Best Regards,
Rose.

Hi,
Try using the links
www.sapsuperusers.com Material available on all the modules
www.help.sap.com
www.sap-img.com
www.erpgenie.com Online Pdfs are available
Thanks,
Ajay

Queries for Vendor Master Data

Hello,
Does anyone know if there is any standard queries for vendor master data?
Thanks ans best regards
Maria Stone

Nothing standard. You can easily get it though. In the infoprovider right click and insert your characteristic as a Data target. Once done you can then create queries on you characteristice vendor.
pls assign points to say thanks.

Standard BI Queries for SAP HR ECM module

Hello Gurus,
Can anyone list me the standard BI Queries for SAP HR ECM module? (Enterprise Compensation Module) for ECC 6.0
Any concerns greatly appreciated and rewarded..
Thanks,
Soniya Singh

http://help.sap.com/saphelp_nw70/helpdata/en/3e/0895ec8866f44cac9f1825370c88d2/frameset.htm

Standard table for finding query where used list

Are there any standard tables available to find the list of web templates, bex reports and views using a particular query?
i.e if i have the query name i should be able to find out where all it is being used.
Thanks,
Archna

Hello,
You have to join multiple tables to achieve this, here we go
FOR QUERY Related Information
RSRREPDIR - Directory of all reports (Query GENUNIID)
Choose Type of a reporting component -> REP
Tips :
Choose Type of a reporting component -> QVW for query view
SE11 -> RSZ* -> F4 gives you all tables related to queries
For WORKBOOK Related Information
Use the FM RRMX_WORKBOOK_QUERIES_GET to get the queries in a workbook by selecting the workbook ID from table RSRWORKBOOK
Tips :
SE11 -> RSRWB* -> F4 gives you all tables related to workbooks
SE37 ->RRMX_WORKBOOKS* -> F4 gives you all the FM related to workbooks
For Webtemplate Related Information
Choose the dataprovider for query / view ID.
SE11 -> RSZWOBJXREF - Structure of the BW Objects in a Template
Also see,
SE11 - > RSZWTEMPLATE - Header Table for BW HTML Templates
Thanks
Chandran

Regarding Standard Queries

Hi Experts,
Please tell me are there any standard queries or Cubes are available for the following reports?
A) ANNUAL ORDER BOOK TARGET
B) ORDER BOOK TARGET TILL THE LAST MONTH
C) ACTUAL ORDER BOOK ACHIEVED TILL LAST MONTH
D) TOTAL U.E.O.B.TILL LAST MONTH
E) ORDER EXPECTED IN THE CURRENT MONTH
F) ORDER LOST DURING THE MONTH
Thanks In advance

Hi,
It depends on Requirements.
1. Find out the requirements gathering from the functional team.
2. Gather the reporting layouts as you mentioned list.
3. check any standared objects suitable to your requirement (Mentioned Reports).
4. If any Standard Objects available then
Goto RSA1> Select Metadata repository> Give the Datataget name--> Select Search button.
it will display the network flow. click on Network flow--> you can find the Standard Reports.
5. You can install the standard suitable reports from BI Content.
6. If Standared Objects are not available in BI content, then you have to customize the Objects link Datasource/DSO/CUBEs and Queries which are more relevant to your requirement.
Regards,
Suman

Standard Queries

Hi All,
How to find the standard queries in SAP BI related to specific module like FI. How to install that queries?
If you have SAP FI standard queries, Please let me know.
thanks,
KN

Hi,
generally I go to the infoproviders which are related to FI module and see the flow.
See this link it gives you the informetion about most important account recivables and payable flow.
http://help.sap.com/saphelp_nw70/helpdata/en/86/9f6f3b2c9b9363e10000000a11402f/frameset.htm
For Asset accounting
http://help.sap.com/saphelp_nw70/helpdata/en/d7/3d6937cd2b8632e10000009b38f8cf/frameset.htm
general Ledger
http://help.sap.com/saphelp_nw70/helpdata/en/d5/53c73cee4fb55be10000000a114084/frameset.htm
You can find in help as well.
To install them you will have to install the whole flow for the queries like cubes,transformation etc.
Drag the cubes and it will drag the necessary objects and then you can install all of them.
chose necessary objects when grouping them.
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
Thanks
Ajeet

Standard queries SD/MM FI/CO in xls

A customer asks me to show all the standard business content queries in the SD /MM and FI/CO area . In the service marketplace and in the help sap i have found only the queries with technical details of the different infobjects/ KF /structures etc.
Is it possible to obtain some xls templates of the standard business content queries for this software evaluation ?
Thanks in advance for the help
[email protected]

Hi Andrea Previati
As per my Knowledge No .
Ny ways still u have possibilities via Service.sap
Thanks & Regards
R M K
**Winners don't do different things, they do things differently**
> A customer asks me to show all the standard business
> content queries in the SD /MM and FI/CO area . In the
> service marketplace and in the help sap i have found
> only the queries with technical details of the
> different infobjects/ KF /structures etc.
> Is it possible to obtain some xls templates of the
> standard business content queries for this software
> evaluation ?
>
> Thanks in advance for the help
>
> [email protected]

Standard queries installation

Hi,
            My requirement is only standard queries installation.
           can i install particular infoarea ,infocubes and all????in my se09 having only query requests and infoarea shows "NODEISNOTCONNECTED"
Can you suggest me. what is the procedure
Regards,
devi

Hi Devi
Before answering the question the following are the tweaks that are in mind
Is it the requirement that business wants only the standard content queries related to particular info area..???
If yes and the system is greenfield one(assuming new system)
please follow the below steps...
Choose grouping as only necessary and then collection mode automatically and then flag the objects and install it in back ground.
Just ensure that you have placed the match or copy option it it is not a green field system..
Here is the link for BI content installation procedure [Installing Business Content|http://help.sap.com/saphelp_nw04/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/frameset.htm]
Hope its clear a little..!
Thanks
K M R
***"Make everything as simple as possible, but not simpler." Albert Einstein. ****
devi wrote:
hi Suman,
>
>                     ok..Install before ,the transfer and update rules are also installed right?but i won't have much idea intosap bw 3.5....
> in this situation what can i do???
>
>
> Regards
> devi

Delete standard queries in SPM

Hi All,
We are on SPM 2.1 SP5. SPM out of the box list the standard queries as the list of datasources on the SPM UI. In my current assignment we dont use any other queries other than Spend Analysis Final and Spend Analysis Detail. We would ideally like to delte all the remaining queries from front end. When I goto Administration --> Analysis Administration --> Application Properties --> Datasources i see delete icon next to each data source. But for some reason there is no action post clicking the delete icon next to standard datasources. Also i could successfully delete "Z" datasources created and added by me.
PS: Datasources above means the Bex queries included in SPM UI as datasources.
- Help Appreciated.
Regards,
Sampat Desai

Hi Sampat,
I think you need the content creator role for this, create a blank ABAP role ZXSA_CONTENT_CREATOR and assign it to yourself in the back end (SU01). Or you can do it in the UI if you have the relevant auths. That should enable you to delete the out of the box data sources. Be careful with this role, you can delete all standard content. Also, SAP say you should only have this role applied for a specific action that explicitly requires it, not general use, so either create a special user for it, or remove it after completing the aforementioned action.
Also would recommend upgrading to the latest SP. SP6 patch 4 as there are some important fixes that were affecting our system.
Hope this helps, let me know if it works
Thanks
Neil

Activating standard queries from BI content

Hi Guys,
Can u give me the step by step process to activate standard queries from the BI content with all its related objects.
Thanks in advance...

Hi,
To install Query:
RSA1->Business Content->first choose 'Collection Mode' Start Manual Collection.
Click 'Source System Assignment' button and tick R/3 source system or other source system related (Normally this setup will be done if someone already installed business contents before).
Then left window choose 'Object Type' -> middle window choose 'Query Elements->Query' and double click 'Select Object' -> find the Query you want to install, and click 'Transfer'.
Query will be transferred to right window, click Grouping and choose option 'Only Necessary Objects',
After objects collection is done, click 'Install'-> Install (you can do simulation here, check the help for details).
Thanks & Regards,
SD

Lync 2013 standard server for 3000

Planning to deploy Lync 2013 standard server for 3000 users, IM/presence, Audio/video, persistence chat, monitoring/archive. external access required so 1 edge server in DC and 1 in DR. No enterprise voice. DC and DR are corrected with dark fiber
one lync 2013 standard server in DC and 1 in DR. 1 edge server in DC and 1 Edge server in D R.have couple of queries.
1. can i get HA while doing server pairing in DC and DR?
2. how much time will it take for frontend failover if my frontend server is down in DC.
3. how much time will take for external access failover in DC and DR?
4. are there any potential risks if using standard version instead of enterprise?
Basically client need cost effective solution as lync is not critical for him, does not want to use 3 FE servers in DC and 3 FE in DR to achive HA. want to achieve the solution with standard servers.

1) HA typically refers to automatic failover, so not with Standard edition, but you can get manual failover with this with nearly full functionality.
2) Again, this is manual, but once invoked less than 20 minutes I'd think, possibly faster, only testing invoke-failover will tell you for sure but it won't be too bad.
3) This involves a topology change to change the federation route, possibly next hop for the edge, and possibly media path for a front end pool. That can be completed and replicated in under a minute. You may want to point your external simple
URLs and such (lyncdiscover) at the remaining server, this may be a DNS change to point to a separate reverse proxy. Your _sipfederationtls._tcp SRV record can have a lower matching partner as well, but I typically prefer to keep low TTLs on the external
DNS records so they can be changed quickly.
4) Sure, no automatic failover, your scalability is limited without building out new pools later, no SQL backend that can be mirrored for a bit more resiliency. But again, you can manually failover without issue, you just have to be able to tolerate
a short outage.
Technically, you'd only need 1 FE in the DR site. You have to match Ent/Ent or Std/Std in a pool pair, but the number of servers don't need to match. Still, the HLB and SQL requirements can be costly so I understand this.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications

Standard report(for open PO order items) with estimated Delivery dates

hi friends
i would like to know if there is any standard report(for open PO order items) with estimated Delivery dates on it.
thanks
alahari

ME2M (by material)
ME2L (by vendor)
ME2N (by number)
Use selection parameter WE101 for open GR
and scope of list EINT (scheduling lines)

Standard Queries for MM

Similar Messages

Maybe you are looking for