Standard Queries for SAP SCM - TM
Hi Experts,
Can somebody provide me with links or details about standard Business content queries that SAP provides for BI integration with SAP SCM - Transport Management ? I tries searching SDN and also help.sap.com but couldn't get.
Thanks in Advance,
Best Regards,
Rose.
Hi,
Try using the links
www.sapsuperusers.com Material available on all the modules
www.help.sap.com
www.sap-img.com
www.erpgenie.com Online Pdfs are available
Thanks,
Ajay
Similar Messages
-
Standard BI Queries for SAP HR ECM module
Hello Gurus,
Can anyone list me the standard BI Queries for SAP HR ECM module? (Enterprise Compensation Module) for ECC 6.0
Any concerns greatly appreciated and rewarded..
Thanks,
Soniya Singhhttp://help.sap.com/saphelp_nw70/helpdata/en/3e/0895ec8866f44cac9f1825370c88d2/frameset.htm
-
List of Standard Queries for SD, MM
Hi Experts,
Please provide the links for the list of Standard Queries for SD and MM modules.
Will asign the points surely...
Thanks,
SujeetHi Sujeeth,
Check the follw link for SD
www.help.sap.com/saphelp_nw70/helpdata/en/ce/27920ede2111d2acb70000e829fbfe/content.htm
And for MM
www.informit.com/articles/article.aspx?p=664660&seqNum=2 - 35k
www.help.sap.com/saphelp_nw70/helpdata/EN/d2/cb415f455611d189710000e8322d00/content.htm - 20k -
www.help.sap.com/saphelp_pserv471/helpdata/EN/f9/cc9138e4a0341fe10000009b38f8cf/content.htm - 7k -
Regards,
Vamsi Krishna chandolu. -
Standard Queries for CFM module
Hello Experts,
I m implementing the CFM module standard objects. Now i want to know what standard queries are available for CFM.
In business content i can find standard queries for only Analyser.No queries for Transaction Manager are available.
can anyone help me know if some standard queries are available for CFM in Transaction Manager.
thanks in adv.
Bhavna.Attached; sample bridge, routed and one arm mode configs as well as config quickstart for ace 4710
http://preview.cisco.com/en/US/products/ps7027/products_installation_and_configuration_guides_list.html')">http://preview.cisco.com/en/US/products/ps7027/products_installation_and_configuration_guides_list.html -
Please send me the link where i can find standard cubes,.....Queries for Inventory and Purchasing.... I think this is the link for inventory management please correct me if i am wrong. Pleasee send me the link for puchasing...billing, shipment,
http://help.sap.com/saphelp_nw04/helpdata/en/fb/64073c52619459e10000000a114084/frameset.htm
Regards
Naga
Message was edited by:
naga yadavalliHi Naga,
You can start looking at the business content from this link:
http://help.sap.com/saphelp_nw2004s/helpdata/en/3d/5fb13cd0500255e10000000a114084/frameset.htm
Here you can also use the search box (upper right) and in the dropdown choose BI Content. Start looking at Supply Chain Management to find the sub areas for Procurement, Manufacturing and Inventory Management.
You can also find the best practices for some modules here:
http://help.sap.com/bp_biv170/html/bw.htm
Hope this helps... -
Client concept for SAP SCM APO and SAP TM
Hello,
We are installing SAP SCM APO 5.1 (SNP, gATP, DP) and SAP TM 7.0 (ramp up). Both connect via CIF to ECC 6.0 SP3. As far as my knowledge goes for CIF, both master data and transactional data is exchanged via CIF.
In ECC we have a three client concept:
100 customizing only
200 customizing + master data (golden client)
300 customizing + master data + transaction data
Can we use a similar model for TM and SCM APO as well? Should we then only connect ECC-300 to TM-300 and ECC300 to SCM-300 via CIF?
I have also heard that also some ECC customizing is transferred via CIF to SCM/TM. Is that true and does that change this model?
Regards,
Rob Veenman
SAP Basis.Rob,
As a general rule of thumb, for each ECC client you will probably want an SCM client. From your landscape description, it is not clear to me in which clients you perform the everyday functions of development/test/production, but I guess you have already worked that out. Without knowing exactly how you manage your environment, I will say that it is probably a good idea to have active CIF connections between each of the three pairs of clients. Once you have set up a single connection between your first pair (ECC/SCM), you will find that setting up the second and third is pretty trivial.
Yes, quite a bit of ATP configuration can be CIFd across. Typically, you do this one time, and then lock the transfer of config out (there is a config setting in SCM to stop further transfer of config). From that point forward, any config that must be parallelled in both systems is usually done manually in both systems. Notable exceptions are Factory Calendars, units of measure, and Fiscal Periods, which can be pulled across from ECC to SCM any time you want via standard program.
Regards,
DB49 -
Standard report for SAP HR Infotype 8 India
Hi,
I would like to know if SAP has provided standard report for infotype 8.
1) I would like to download personal no wise wage type data from infotype 8 for a period.
2) And I would like to compare the basic rate data prior to increment or promotion of a personal no?
Can you please suggest a standard SAP HR report present in SAP 4.7?
ShankarHi,
Use wage type repoter (TC-pc00_m99_cwtr) OR best to use ADHOC query (TC - PAAH) -
IDES-Scenarios for SAP SCM APO?
Hello!
Lately I have been working with SAP ECC on an IDES system and help.sap.com provides nice example scenarios on how to use it (things like: how to specifiy production plans and orders for building a motor bike in the IDES-Company).
But now working with SAP SCM, and i cannot find any scenarios describing how to use the system with the included training data.
Anybody knows where the examples are or if they exist?
Thanks a lot!
MichaelHi Michael,
Have you ever seen [Customer Case Studies|http://www.sap.com/solutions/business-suite/scm/customersuccess/casestudies.epx] for SCM?
I suggest you also to look at [SAP Knowldege Shop|http://service.sap.com/knowledgecat] you should look for information about [Best Practices|http://help.sap.com/content/bestpractices/industry/bestp_industry_automotive.htm].
If you want to know how you could get the information on DVD, please [look here|http://help.sap.com/content/bestpractices/scenarioscope/industry/How_to_order_ext_EN.ppt].
You can get [more information about SAP Best Practices on SAP portal too|http://www.sap.com/services/bysubject/servsuptech/servicedetail.epx?context=0DFA5A0C701B93893897C14DC7FFA7D62DC24E6E9A4B8FFC77CA0603A1ECCF58A86F0DCC6CCC177ED84EA76F625FC1E9C6DCDA90C9389A397DAB524E480931FB6B96F168ACE1F8BA2AFC61C9F8A28B651682A04F7CEAA0C4%7c0E320720D451E81CDACA9CEB479AA7E5E2B8164BEC98FE2B092F54AF5F9035AABA8D9DDCD87520DB9DA337A831009FFCF6D9C0658A98A195866EC702B63C1173C6972CA72A1F8CB611798A53C885CA23A3C0521D54A19FD1B3FD9FF5BB48CFCC26B9150F09FF3EAD843053088C59B01E24EA8E8F76BF32B1DB712E8E2A007E7F93D85AF466885BBD78A8187490370C3CB3F23FCBC9A1A0D7].
I think the provided links will help you to get what you want.
Best regards,
Carlos -
Hello Everyone,
1) Iam New to Interactive forms by Adobe.I want to use this for SAP Engineering Change Management Process.
I heard that there will be a standard form available in Out of the Box SAP.
Can someone guide where can i find the Standard form in SAP system.
2) In Configuration side(Tcode spro) for Engineering Change Management where do i need to configure to activate these forms.
3) What are the system prerequisites(Any specific Licensing required) to use Adobe forms.
Any information related to this or any suitable links where i can get relevant information will be appreciated.
Regards,
Praveen.Hi Praveen...
First You have to Install this...
prerequisites to use Adobe Forms in SAP
Configuration
SAP NetWeaver 6.40
Java Stack installed
Adobe Document Services (ADS) installed on the Java Stack
Adobe LiveCycle Designer 7.1 is installed on your machine ( Desktop / Laptop)
Adobe Reader 7.* is installed
Transactions in SAP Engineering Change Management
CC01 Create change Master.
CC02 Change change Master.
CC03 Display change Master.
CC22 Change Object Mgmt Record: Initial Screen
CC23 Display Object Mgmt Record: Initial Screen
CC11 Create Material Revision Level
CC12 Change Material Revision Level
CC13 Display Material Revision Level
CC15 Change Document Revision Level
CC16 Display Document Revision Level
CC31 Create change request.
CC32 Change change request.
CC33 Display change request.
CCUNDO Undo changes with Engineering Change Management ( Available from SAP ECC 6.0)
CC07 Engineering Change Management Information System
CC05 Change Overview
CC60 Change Hierarchy
DSAL Log for Digital Signature -
Standard languages for SAP LSO
Dear SDN community,
Can anyone tell me, where I can find the standard languages of SAP LSO? I've read somewhere that SAP would generally support around 41 languages. Does anyone have a more concrete information in respect to this topic?
Many thanks in advance and regards,
IuliaHi there,
these information is also contained within the PAM (Product Availibillity Matrix of SAP), to make it short the PAM for the actiual release of the SAP LSO 6.0 can be found in the service marketplace via the alias PAM, or much ´more easier:
https://websmp109.sap-ag.de/~form/handler?_APP=00200682500000001303&_EVENT=DISP_NEW&00200682500000002804=01200314690900000220
(i hope it works, and by the way this is my premier, my firdst posting on SDN
regards
Markus from Epi-Use Germany -
Ideas for mobile applications for SAP SCM area
Hi Experts,
I am currently working on generating ideas (business requirements, functionalities) in SAP SCM area which can be be built or simply exposed on mobile devices.
Can you please contribute any idea you might have or direct me to the right source of information you might be aware of.
Rgds
AlokHi Alok,
ExpertIG engages in Enterprise Mobility Solutions and may be able to guide you in the right direction. You can check out our website at: http://www.expertig.com/enterprise-mobility and set up time to speak with one of ExpertIG's thought leaders.
Best of luck,
Michelle Plutz
ExpertIG -
Activation the Standard reports for SAP CRM IN BW 3.5 Version
hi guys
I am working on SAP BW 3.5 version
I have Activated the Satadard Reports for CRM Campaign, Lead, Opportunity in BW 3.5 Business Content
But I don't find the any single Standard Report in BEX.
I followed these Steps ;
BEX - Open - Queries - Info Area
If any One Knows please let me Know, Urgent Requirement
thanks in Advance
Sumadid u try to see that reports in metadata repository
login to bi system
enter RSA1
on the left panel select METADATA REPOSITORY
select LOCAL OBJECTS
then hit Query
TRY TO find ur REPORTS WITH TECHNICAL NAME
if it exists here than u shuld be able to seee in infocube.
if that doesnot make sense
go back to LOCAL OBJECTS SCREEN
hit INFOCUBE
locate ur infocube and select it
now everything with respect to infocube active and available is visible
all char catalog, keyfig catalog, queries etc.... -
ERROR while checking standard program for SAP NOTE 175482(QM)
HI,
experts
i am implementing sap note 175842 QM MODULE .
My note is successfully implemented ,for that i created standard program RQEVAC50 USING ACCES KEY.
but in se38 report comes like this
REPORT RQEVAC50.
REPORT RQEVAC50 MESSAGE-ID QA.
so while checking error comes boz 2 report hedaing is there .
I WANT TO DELETE FIRST ONE BUT IT CANT.
I chose activate anyway but while releasing request it gives error.
THANKS
AJAY.hi
error is 'OBJECT REPS RQEVAC50 does not exit create it'**
I CREATED PROGRAM USING ACCESS KEY SO IT DOES NOT ALLOW ME TO CHANGE OR DELETE ANY LINE IN THE PROGRAM.
THATS THE MAIN PROBLEM.
Whwn i created a program RQEVAC50 it is totally blank but while implementing sap note the code comes in my progarm
so there are 2 report hedaing .
THANKS
AJAY. -
PI Standard Interfrace for SAP HR
Hello,
We need to transfer SAP HR data, Org and Personal to newly implementing SAP SRM, shopping cart module. We also have PI in place, we are wondering what would be the best practice to transfer the SAP HR data from ERP to SRM, is it PI or standard SAP ALE? I looked through the ESR XI contentt for EA-HR and SAP HR, I don't see any interface for Org structure or Personal data to transfer from ERP into a Remote system? I guess it would be ALE then?
Please advice.
Thanks
Sureshcontinuing from michael's reply........
Current version of HRMD_A07 idoc can be used to exchange most of the HR master data like PA, OM, etc.
coming to your scenario from ECC to SRM.
i would suggest a IDOCPI IDOC interface from ECC to SRM.
This way, it would be,
--Less custom effort.
--interface details are available @ common place(PI).
--unlike ALE/IDOC, which is point-point .
santosh. -
Hello All,
Can any body give me the total SQL queries which will be used in SAP.
Thanks&Regards,
Praveen KondabalaHi,
If you do need that kind of information, then it is easier that you do not use any.
> Like Oracle DBA
you only need to read the documentation about
1) brtools
2) dbacockpit (I assume you have a fairly recent SAP version)
you can find the information about this two "things" in
SAP on Oracle
Maybe you are looking for
-
Saving always goes to documents folder
Hello, I've posted this problem before but haven't received a fix for it yet. Perhaps I'm just explaining it wrong. Simply put every time I go to save a document, instead of going to the last folder used in the program it always goes to the documents
-
In our organisation SAP BW and BO XIR3 (3.1) has been installed. And SSO being implemented between both the system . User accounts are created at BW level which were used for BO even. We have maintained authorisation by hierarchy at BW side and wante
-
Hi, The following is my source structure : Recordset 1..1 -> Idoc 1..unbounded -> Segment 1..1 <Recordset> <Idoc> <segment>abcdefgh</segment> </Idoc> <Idoc> <segment>klmno</segment> </Idoc> </Recordset> I have a requirement where in I have to pass th
-
Unable to scan on mac X.7
Hello. I'm using the software downloaded through Apple as instructed here and still every time I try to scan it does not work. Any ideas on what else I can try? The printer option works fine btw.
-
Hi, I have InDesign-files made about one and a half monthes ago (with CS5). When they were done they had text with small caps (font used was Arial and Trebuchet), and they worked fine. Now, when I opened those same files (which have not been edited i