Standard report for leading prod. order with variance  value  & qty.

Hi Gurus,
I am searching for  a standard Tcode to get the variance value/Qty against all the leading production orders which are settled in a particular period.
Note: If a leading production order contains more than one sub orders then the qunatity of sub orders should merge with the leaing order and all the variance from individual sub orders should also merge with the leading production order.
Please suggest the tables and fileds are used for storing the leading and non leading production order and its corresponding Planned/Actual and Variance values.
Please guide me.
Regards,
Ramakant.

Hi,
Thanks for your early response.
Actually i am unable to use tcode: KKBC_ORD rather able to use KKBC only.
Using KKBC (Target/actual/production variance) and activating collective order from setting option only able to see the details for a particular leading production order only relating toa  particular period .
My requirement is to display all the production orders settled in a particular period along with (Material code /order number/ Qty/Actual value and variance value).
Note: If any leading order exists then that should be collective order i.e.(value and Qty should come against the leading order number).
If there is any standard tcode exists please let me know else provide the tables and logic to bui;d up such a report.
Regards,
Ramakanta

Similar Messages

  • Standard  report(for open PO order items) with estimated Delivery dates

    hi friends
    i would like to know if there is any standard  report(for open PO order items) with estimated Delivery dates on it.
    thanks
    alahari

    ME2M (by material)
    ME2L (by vendor)
    ME2N (by number)
    Use selection parameter WE101 for open GR
    and scope of list EINT (scheduling lines)

  • Standard report for BLOCKED SALES ORDERS

    Hey friends,
              Do any one of you know whether there is any standard report that shows the Blocked sales orders..??
    thanks in advance,
    Regards,
    Anvita.

    anvitha,
    You have the following transaction available in SAP for showing the sales documents blocked due to different reasons.
    V.14  Sales Orders Blocked for Delivery  
    V23   Sales Documents Blocked for Billing
    VA14L Sales Documents Blocked for Delivery
    VE31  Blocked SD Documents (Export related)               
    VKM1  Blocked SD Documents (Credit Blocked)               
    Check which one will satisfy your requirement.
    Thanks
    Giridhar

  • Standard report for settled internal orders

    Hi All,
    Is there any standard report available in Asset for settled internal orders.
    We can able to see in S_ALR_87013019.  But all Internal orders are appearing.  I am not able to see settled orders.  How to identify those... (Like flag color difference should be required for settled and open).
    Thanx in advance.
    Regs,
    Bhaskar

    Hi All,
    Is there any standard report available in Asset for settled internal orders.
    We can able to see in S_ALR_87013019. But all Internal orders are appearing. I am not able to see settled orders. How to identify those... (Like flag color difference should be required for settled and open).
    Thanx in advance.
    Regs,
    Bhaskar

  • Can we take standard report for all sales orders based on the condition typ

    Hi all,
    Based on the condition type, we need to take a report for sales orders on the particular date.
    Thanks and Regards.....VM

    Hello again.
    Searching for a solution, I found a Logical Database for sales orders, that have all the information that you need.
    Using like reference the post of Bhagavatula, in the same transaction SQVI you can use, instead of the suggested join, you can select a logical database called VAV in Data source.
    This logical database links the tables, VBAK, VBAP, VBUK and KONV that is the central point of the question.
    You can list the information of logical database using the transaction SLDB.
    In 'Logical Database' inform VAV.
    Press F8 to list all the fields.
    More information about logical database in:
    Link: [SAP Logical Database|http://help.sap.com/saphelp_46C/helpdata/EN/9f/db9b5e35c111d1829f0000e829fbfe/content.htm]

  • Report for released purchase order

    Hai guru's
    this is second time but i did't get any good replay please consider this, i want any standard report for released purchase order,means(i released two backdated po today next day i verify the report ME2n,those po are not display, the system take only document date not released date, now i am using CDHDR through this i got the report. but it is big process, so once check this and send your valuable solution.
    Prasad

    Hi Krishna,
    You could use Me2N with the dynamic selection coupled with normal selection screen.
    In Dynamic selection(3rd icon in screen).....you can select for which company code, release indicator as released....and save it as default variant.
    hope this should solve your query
    Sk.

  • Standard report  for production order

    Dear all
    Is there any standard report with reference to material for all procuction orders ie open,closed etc

    Hi,
    COOIS - Production order information system
    For Open Prod orders
    Enter material number and sys. status CNF tick Excl.
    For Closed Prod orders
    Enter material number and sys. status CNF, DLV.
    Regards,
    Sankaran

  • Standard Report for missing parts at production order operation level?

    Hi PP Gurus,
                We have standard report for missing parts at production orders level.
    For our client, they need a report for missing parts analysis at production order operation level. Do we have any such standard report in the SAP?
    Please help.
    Thanks,
    Reddy.

    Hi Arvind,
          Thanks for for your response.
    1. List: Components,  Layout: Standard layout          set the Missing part
           It shows the component requirement/withdrawn  quantity for each operation of production order. It is not showing the commit quantity.
    2. List: Components,  Layout: Pick list          set the Missing part
           It shows the component requirement/withdrawn  quantity for each production order.
    3. List: Components,  Layout: Missing Parts List-Material View          set the Missing part
           It shows the component requirement/commit quantity for each production order. It is not showing the commit quantity at opertion level.
    4. List: Components,  Layout: Missing Parts List-Order View          set the Missing part
           It shows the component requirement/commit quantity for each production order. It is not showing the commit quantity at opertion level.
          We are unable to get the solution from all these 1 to 4 reports from COOIS.
    Do we have any option to change the existing layout (ex: 3 ) to get the commit quantity for operation with missing parts indicator?
    If avilable, what is the procedure to be followed?
    Thanks,
    Reddy.

  • Do we have standard report to show sale order stock with amount?

    Do we have standard report to show sale order stock with amount?
    I try to use MB5B and MBBS but they don't show value.
    MB5B show only qty
    MBBS no any report.
    Please kindly help.
    Thank you very much.

    Okay Thank you very much for your suggestion.
    I think I have to create a new ZProgram. T_T

  • Standard report for sales order

    HI all
    I would like to know whether there is any standard report for sending confiramtion mail to customers once the shipments are planned.
    Or atleast to track the status of sales order (to find out whether the shipment is planned) so that i can club the mail program with this.

    Hi,
    Check the following links:
    http://sap-img.com/abap/make-e-mail-sender-of-po-the-po-creators-name.htm
    http://sap-img.com/abap/sending-mail-when-the-purchase-order-is-released.htm
    Regards,
    Bhaskar

  • WIP calculation for Prod.order with status DLV

    Dear experts,
    Is there any way to change WIP calculation method for Prod.order status ?
    In t-code OKGC:: By default system will set:
    Order status      Status number         RA type
    REL                          2                             WIP Calculation on Basis of Actual Costs
    DLV                          3                            Cancel Data of WIP Calculation and Results Ana
    PREL                  1                            WIP Calculation on Basis of Actual Costs
    TECO                  4                            Cancel Data of WIP Calculation and Results Ana
    I can not change any thing in t-code OKGC (gray after insert: CO, RA version, RA key).
    As I understanding: Prod.order with status DLV will not be considered to calculate WIP.
    But I want to calculate WIP for Prod.order with status DLV. Could you pls guide me how to configure the system?
    Thank you!

    Hi,
    I suppose it is positive variance as the yield from the order is 10 pieces more than the planned quantity of 1000 and it is always a variance and no WIP involved in this case. It can be settled to FI/PCA and to CO-PA by variance categories (if you have configured accordingly)
    Therefore the accounting entry would be:
    1. Delivery to stock of 10 pieces:
    FG Debit
    Change in Stock Credit
    2. Variances will post the difference:
    Change in Stock Debit
    Price Difference is Credit
    Concerning the valuation method it needs to be tested before it can be implemented.
    Kind Regards
    Umapathi G

  • WIP calculation for Prod.order with status TECO

    Hello all.
    My question is the similar to WIP calculation for Prod.order with status DLV
    But I need that
    - if the Production order has status TECO - the system calculate WIP
    - if the Production order has status DLV u2013 the system settle the order.
    1.     I try to change u201CStatus Numberu201D in TCODE OKGC. But I have receive two different result:
    - if I change u201CStatus Numberu201D for status DLV from 3 to 2, then during WIP calculation of the order with status DLV u2013 WIP have been calculated.
    - but if I change u201CStatus Numberu201D for status TECO from 4 to 2, then during WIP calculation of the order with status TECO u2013 WIP have been CANSELED.
    2.     I try to change results analysis key for status TECO from u201CZu201D to u201CFu201D in TCODE OKG3. BUT during WIP calculation the system create error message KJ 363 which require that results analysis key must be change to u201CZu201D
    How can I resolve my problem?

    Hi,
    I don't have the answer if the requirement is that even after producing the materials, till the time accountant checks the order and does this action, it should remain in WIP. Honestly it doesn't make any sense to me or i have not understood this problem. Anyways as per my current understanding I can suggest the following process for your scenario.
    Once production is stopped in between the process, the order should be in PDLV status (partial confirmations happened in the order)
    Now go and clear the reservations manually from the production order .( delete the component line items from the order). Now depending on whether you are following WIP at actual cost, system will post the difference between credit and debit of that production order as WIP for the month end process.
    Once Accountant okays the entries in the production order, he can do the TECO and settle the order. Now WIP will be reversed and variance will be posted.
    To avoid the already produced goods mixing up with your other stock, u might want use Quality Management with the help of your PP consultant.
    Best Regards
    Vimal

  • The standard report for BOMs of a material with a selected period?

    Hi Gurus
    Is there any  standard report for BOMs of a material with a selected period?

    Hi,
    You will have to develop a report for your requirement,
    The following tables will be used for the report
    MAST-WERKS
    STPO-MATNR
    MARA-MAKTX
    STPO-BMENG
    STPO-POSNR
    STPO-IDNRK
    STPO-MAKTX
    STPO-DATUV
    STPO-MENGE
    STKO-MEINS
    STPO-AVOAU
    Regards
    Merwyn

  • Standard report  for solve inconsistencies with user SAP.

    Dear Experts.
    We have a problem with a user(ZEST) that in the portal when I open a service(application) display a  blue Window of Internet Explorer without display information.
    We have copied this user((ZEST) TO (ZEST2 )with the same roles , however   this user  new work fine.
    My question is:
    There are a standard report  for solve inconsistencies?
    We have deleted the user and have created it of new, however this not work.

    Run the t-code SA38
    Specify the name POWL_D01
    In selection screen specify the user id in USER field of which your facing issue
    Click on Execute
    Run the T-code SA38
    Specify the name POWL_WLOAD
    In selection screen specify the user id in User input field of which your facing issue
    Click on Execute
    Now you check it issue will solve.

  • Standard report for material document with excise

    Dear Gurus,
        Is there any standard report for which i can trace for all the incoming material grn whether excise is captured or not.
        i.e) a report with excise no, quantity and material document   
        thanks in advance
    Vasanth

    Hi,
    J1i7 is the standard report which shows wether the part1 or part2 is posted or no posting is done, you can select the layout as per your choice by change layout.
    Thanks,
    Vinay

Maybe you are looking for

  • Employee table

    Hi SDNers, I have a doubt like when we create any customer or vendor,those corresponding details will update at CDHDR table. In the same way, when we create or change the employee details, which table will records those. and wat all the tcode for cre

  • IOS6 JERKY SCROLLING, BROWSING WITH UNICODE FONTS

    Unicode font have been used for many years. We use Burmese Unicode fonts name Zawgyi Unicode font to view our language on web. We use special apps (Mogok, Myanmar Browser lite) for viewing on iPhone and iPad as this font is not embeded. They are OK t

  • CALENDAR COLORING EVENTS! PLEASE APPLE GIVE US THIS OPTION!

    Hello! I realy like the Calendar app on my iPad. I just have one BIG problem and suggestion. I use PC so I don't have iCal. But I would realy like to give my events a different color. There is only blue color for all events you add on the iPad. This

  • Problems with LOV+Clear Form +Enter Query

    Hi Friends, I have a Master Detail Form which is only query form my requirement is as soon as the user presses F9(List of Values) on Employee Number then 3 activities should be done. 1. Clear Form 2. Enter Query 3. Displaying List of Values Any ideas

  • CFAjaxProxy Error

    Hi guys. I'm getting started with some ajax functions. so i had to look at cfajaxproxy. It look as it is very cool function but i don't get it work. I've got a directory with two files in it. cfAjaxProxy.cfm and proxy.cfc on the toplevel. There's no