Standard report S_ALR_87013611 ( Report writer) Modification

Hi ,
My requirement is to modify the standard report S_ALR_87013611 which developed on Report writer. It is drildown report writer report. It is calling the KSB1 transaction with user interaction. I want to modify the report by replacing the custom transaction at the place of KSB1 Transaction.
Please guide me the steps .
Thanks in advance,
Best regards,
Jagadeshwar.G

Hi,
Reports are not saved on a server/disk, but within the system itself. You can export them, indeed, to the local disk just in  order to re-import in some other system.
You can read about Report Writers in this link:
http://help.sap.com/saphelp_erp60_sp/helpdata/EN/5b/d22db643c611d182b30000e829fbfe/frameset.htm
Regards,
Eli

Similar Messages

  • Modifications in Transaction  S_ALR_87013611( Report Writer )

    Hi Gurus,
    I have a Standard transaction S_ALR_87013611 which in turn calls the transaction KSB1.This former transaction is developed using report writer. The Issue is that when I give Cost Center Values twice in the selection screen with multiple values , I get two cost centre values with same number and the corresponding values are added.So I need to restrict the Cost Centre values in the selection screen to unique values.And for that I need to modify the report . So if anyone have ever worked with report writer or report painter, please tell how to modify the report and add our own coding as in the case of ABAP Query.
    Thanks in advance.

    Thanks for not replying...I have found the solution myself

  • Std Report  S_ALR_87013611  modification

    Hi ,
    My requirement is to modify the standard report S_ALR_87013611 which developed on Report writer. It is drildown report writer report. It is calling the KSB1 transaction with user interaction. I want to modify the report by replacing the custom transaction at the place of KSB1 Transaction.
    Please guide me the steps .
    Thanks in advance,
    Best regards,
    Jagadeshwar.G

    Hi there,
    You have two alternatives here:
    1) If you want to use this report via the transaction code S_ALR_87013611 then you must modify the report group 1SIP as follows:
      a) Enter the parameter GCF with value 'X' in your user parameters and save this (only then can you modify report groups in SAP namespace)
      b) Call transaction GR52, enter 1SIP as the report group and the click on the 'Header' button (Bowler hat symbol).
      c) In the area 'Report/report interface' you see the heading '19 reports assigned to the report group' above a 'Configure' button.
          Click on this 'Configure' button to add your custom transaction.
      d) Click on the 'Insert row' button (F6), then on the button 'Other report type' and choose TR for transaction with double-click.
      e) Enter your custom transaction in the input field, confirm this and then save.
          (If you want to move the custom transaction in the list to a certain place, then put the cursor on it and hit 'Select line' (F2) and the put the cursor on the line in the list you want to move it to and hit 'Move' (F8). Then save the entry)
      f) Back in the report group header you should now see that 20 reports are assigned to the report group.
          Now save the report group.
    2) Alternatively (and recommended) you can copy the report group 1SIP as ZSIP (in customer namespace) as follows:
        a) Call GR51 and enter ZSIP as the report group to be created and enter 1SIP as the reference  report group and hit enter.
        b) Proceed as in 1c) through 1f) above.
       This custom report group you can either add to a transaction using SE93 or add to a role via PFCG (will generate a transaction) oryou can execute it directly using transaction GR55.
    Hope this is of use.
    Regards,
    Thomas

  • Need to add Purchase Order field in Standard report in report painter

    Hi Gurus,
    I have a requirement to add an extra field in Cost center:Act/Plan/Comm CC Cur report.This is otherwise a Z report in report painter with 0% code (T-code : GR55-> Report group->Report).But,when we go to technical information of this report,it has four standard sap programs,which contains code for this selection screen.It does not even have a modification scope.
    Selection screen of this report contains following parameters:
    Selection values:
    Controlling Ar
    Fiscal Year
    From Period
    To Period
    Plan Version
    Selection Groups:
    Cost Center Group
    Or value(s)
    Cost Element Group
    Or value(s)
    My requirement is to add one more parameter : Purchase oeder in new block:
    Is there any way to achieve it.
    Note: Copying the standard progs into custom prog is not working,i already tried that.
    Please let me know your suggestions,if any one of you came across such requirement before.it is very impoertant for me.
    Thanks in advance,
    Meenakshi

    Hi Subramaniyam,
    You can find enhancement in me28 by following steps and then apply your logic in include of this enhancement.
    cmod>Give a project name>in enhancement column give the package name ME >f4>in package write ME-->ENTER>It will show you all enhancements available in me28> find which ever suits your requirement>save > click on components> from there you can make changes in include program.to add that particular field.

  • Need extra field in S_ALR_87013611 report

    Hi There,
    I want to modify report S_ALR_87013611. I want to add one column for object currency.
    I think S_ALR_87013611 reports using planning layout 1-157 (standard report).
    I want to customize this standard report and create variant for users so they can have extra object currency field in report.
    can any one suggest me how can i add custom planning layout to S_ALR_87013611 report.
    Thanks in Advance.

    For you to know that kind of technical information, go to the report transaction code S_ALR_87013611. Here, in the menu goto Environment -> technical information. This will give you all the needed information. In this case, library would be 1VK.
    Also, go through this document. It will cover a lot of topics regarding report writer and painter.
    http://www.virtuosollc.com/PDF/Get_Reporter.pdf
    http://sapdocs.info/wp-content/uploads/2008/11/report-painter.pdf
    Shail

  • How to add new customise field in standard SAP ME28 Report?

    Hi Anybody,
             How to add new customise field inside Standard SAP Screen report ME28?.
    Anybody, Please tell me how to do?.
    Thanks,
    Regards,
    S.Muthu.

    Hi Subramaniyam,
    You can find enhancement in me28 by following steps and then apply your logic in include of this enhancement.
    cmod>Give a project name>in enhancement column give the package name ME >f4>in package write ME-->ENTER>It will show you all enhancements available in me28> find which ever suits your requirement>save > click on components> from there you can make changes in include program.to add that particular field.

  • Slow drilling into cost center reports - S_ALR_87013611

    Hi All,
    When drilling into cost center report S_ALR_87013611 to view cost center actual line items experiencing extreme slowness before it brings up the actual line items (which display in transaction KSB1).  Trying to display only one cost element with a few lines in one period for one cost center. The sceen hangs up and takes long execution time to display actual output.
    However, if we launch another session and run KSB1 it runs pretty fast.
    What could be the reason of this slow performance. Checked trace and it doesn't show large execution cost for any SQL statements.
    thanks
    any

    Hi Anya,
    Since we are deling here with a standard report did you check OSS?  This is one note which could be applicable (although it mentions performance problems for a range of cost center while you indicate a single CC).
    [Note 840414 - KSB1: Long runtimes when report is called|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=840414]
    It is worth checking out.
    Good luck,
    Robert

  • Export standard and Custom report to xls / word / power point ??

    Hi
    Apps: 12.1.3
    DB 11gR1
    Is there any tool so that i can save standard and Custom report to xls / word / power point ??
    Thanks
    Vishwa

    There are a few third party tools that let you do that.
    Some such tools are Monarch, Rep2excel etc.
    Google for "convert oracle report to excel" and you will get a few more hits.
    The best way to get it in Excel is to change the output format to XML and write a quick XML publisher template.
    Hope this helps
    Sandeep Gandhi
    Independent Consultant

  • Functional Area Reporting using Report Painter/Report Writer

    Hi,
    Could anyone let me know how we can draw up report for a company with functional areas using Report Painter/Report Writer?
    Our client wants to draw Financial Statements on the basis of Functional Area.
    Thanks & Regards,
    Sajan  C P

    <a href="http://help.sap.com/saphelp_47x200/helpdata/en/5f/b77625a0f811d39755006094b969cf/content.htm">Creating a Profit and Loss Statement with Cost of Sales Accounting</a>
    FSI4 for creating forms and FSI1 for creating assocaited reports.
    Standard report 0SAPPRALO-01 Annual Profit and Loss Statement by functional area, can be checked, under FSI3 Type 005.

  • Modify standard documentation of report

    Hi,
    in SAP note i must modify the documentation of report RPLDADF0. The modification instruction are :
    1. Call up /se38
    2. Select Documentation
    3. Click Change
    4. You are in the document. Before updloading your new document, you either delete the existing documentation or add it at the end of the existing documentation and delete then the old one. The new documentation does not replace the old one!
    5. In the Menu bar, select Document -> Upload
    6. In the popup, select .itf and click Enter. To upload the itf document, go to the folder where you have downloaded and stored the documentation delivered by SAP.
    7. Save your document and activate (click the icon Activate) it.
    On the step 3 when i click on Change button, a window appears "Create modification", the modification name can only begin by Z, it's not really a good way.
    Any ideas ? Thanks.
    Cheers

    Hi,
    Modifying standard documentation of a object comes under custom modification.
    Hence Naming space reserved for customer modifications (Y-Z) Should be used.
    Check this note in support portal :- Note 989653 - Namespaces for docu modifications (customer system)
    Regards,
    Lakshman.
    Edited by: Lakshman N on Jan 6, 2010 11:59 AM

  • Standard and customized reports

    Experts,
    I'm given a requirement to create some reports. Was hoping someone can help me with which are standard and customized reports from this list :
    OPEN PURCHASE ORDER REPORT
    OPEN REQUISITION REPORT
    OPEN RFQ REPORT
    PURCHASE ORDER CONFIRMATION REPORT
    STOCK ITEMS RE-ORDER
    STOCK ITEMS RESERVED
    STOCK ITEMS ABOVE STOCK MAX
    STOCK ITEMS BELOW STOCK MIN
    STOCK ITEMS DETAILS
    STOCK ITEMS INVENTORY CONTROL
    STOCK ITEMS LIST BY NUMBER
    STOCK ITEMS MOST USED
    STOCK ITEMS NOT USED
    STOCK ITEMS ORDER BY COST
    STOCK ITEMS ORDER BY LOCATION
    STOCK ITEMS ORDER BY VENDOR
    STOCK ITEMS OVER RESERVED
    STOCK ITEMS STATUS
    STOCK ITEMS VALUE
    VENDOR PERFORMANCE REPORT
    Regards,

    Hi,
    SAP Std. Reports     Description                                                                          Z-Dev
    ME2N / ME2M / ME2L     OPEN PURCHASE ORDER REPORT     
    ME5A                          OPEN REQUISITION REPORT     
    ME4N / ME4M / ME4L     OPEN RFQ REPORT     
    ME2A / VL06I     PURCHASE ORDER CONFIRMATION REPORT     
    MB53                          STOCK ITEMS RE-ORDER                                                     ABAP Report
    MB24 / MB25                          STOCK ITEMS RESERVED     
                              STOCK ITEMS ABOVE STOCK MAX                                ABAP Report
                              STOCK ITEMS BELOW STOCK MIN                                ABAP Report
    MMBE / MB52     STOCK ITEMS DETAILS     
    MC.1 / MC.9                           STOCK ITEMS INVENTORY CONTROL     
    MMBE / MB52     STOCK ITEMS LIST BY NUMBER     
    MC46                           STOCK ITEMS MOST USED     
    MC50                           STOCK ITEMS NOT USED     
    ME2N / ME2M / ME2L     STOCK ITEMS ORDER BY COST     
    ME2N / ME2M / ME2L     STOCK ITEMS ORDER BY LOCATION     
    ME2L                          STOCK ITEMS ORDER BY VENDOR     
    MB24/MB25                           STOCK ITEMS OVER RESERVED                                        ABAP Report
    MMBE/MB53                           STOCK ITEMS STATUS     
    MB52                           STOCK ITEMS VALUE     
    ME6H                           VENDOR PERFORMANCE REPORT     

  • Error generating report in Report writer (GR214, short dump)

    Hello
    We are making a report in GGR2. When generating the report group, we have dump with error:
    Short text of error message:
    Internal error.: SAPMGRW2, Include: MGRW2F20, FORM: GEN_DATAFI
    ELD.
    Long text of error message:
    Technical information about the message:
    Message class....... "GR"
    Number.............. 214
    Variable 1.......... "SAPMGRW2"
    Variable 2.......... "MGRW2F20"
    Variable 3.......... "GEN_DATAFIELD"
    Variable 4.......... " "
    I have generated as well via GR52 with the same result.
    The report i try to generate has about 500 lines, uses a number of existing sets and has simple formulas in it. When i restrict the number of rows to say 400 I donu2019t have the issue. Is there a restriction to rows in report writer?
    Thanks for your help
    Kai

    Hi,
    The error you are receiving could be caused by a large number of row blocks in your report definition, (you can check the report definition with report RGRRDC00). A report should not contain too many row and column blocks. It is not possible to give an upper bound for the number of row blocks (since the length of the coding depends on other parts of the report as well). However, even a complicated Report Writer or Report Painter report should not contain more than 50 row blocks, and reports with more than 100 row blocks should not be defined.
    In this case the report(s) have to be redefined. Please also refer to the note 387916 for further information regarding this issue.
    When there are more than 30 variables in a report, please have a look at the note 332091.
    Please reduce the number of row blocks in the report by using the function 'Edit' -> 'Rows' -> 'Explode' in the Report Painter
    definition. This function enables several rows to be created for one row block (in the Report Painter definition one row block is just one row). Report Painter (and Report Writer) are designed to display hierarchical reports where the rows in the few row blocks are built up using the 'Explode' function.
    regards
    Waman

  • Standard Sales Analsis Report with Customer Name and Location

    Hi All,
    Can Anybody provide a custom query for the standard slaes Analysis report which includes Customer Name , Location columns in the Standerd Report. 
    Regards,
    srini

    Hi nick,
    See if anybody has worked on SIS (sales information system) in your team.
    He can help you out to create one info structure , by selecting desired characteristics, key figure with respective update rules. though its require lot of configuration but you can make it without abap development.
    (I couldn"t make it in time to provide you detailed configuration but below given path will take you to the configuration area )
    IMG - LG -Logistick information system -logistick data werhouse- data basis- field catalogue.
    IMG - LG -Logistick information system -logistick data werhouse- data basis -
    infostructure.
    IMG - LG -Logistick information system -logistick data werhouse- data basis - updating - update defination & update rules.
    ( MC18, MC21, MC24,& MC30)this transaction help to create field catelogue, info system, update rule & generation log respectively.
    karnesh

  • Sales Order Number in case of drop ship  in Standard PO Print report

    I want to print sales order number in case of drop ship in Standard PO Print report..But I am not getting any tag related to that..
    When I am checking the log file it is present in the log file but not in the Tags..Please help how can I get sales order number in case of drop ship..
    Here is the log file:
    Start of log messages from FND_FILE
    Entering Get_Order_Line_Info 2
    Entering Get_Drop_Ship_Line_ids...1
    no open order line
    line found now 18757558
    Exiting Get_Drop_Ship_Line_ids...1
    line_id 18757558om org 1274
    po org 1274
    from oe_order_lines
    got ship to ct name and location: GRUPO DE COMUNICACIÓN PROMECAL, S.L-1175623
    sales order info: 1.1-1-1-Closed-10000178
    ENTERING OE_SYS_PARAMETERS.VALUE
    Going to get the value for MASTER_ORGANIZATION_ID
    ENTERING OE_SYS_PARAMETERS_PVT.VALUE
    org_id has changed so delete the cache and reset the globals
    PARAMETER VALUE from the DB when org_id has changed : 1275
    ENTER GET_ITEM_INFO PROCEDURE
    ITEM_IDENTIFIER_TYPE : INT
    INVENTORY_ITEM_ID : 1695026
    ORDERED_ITEM_ID :
    ORDERED_ITEM : 40 x Battery 12HX330
    SOLD_TO_ORG_ID : 1684899
    EXIT GET_ITEM_INFO PROCEDURE
    got ct product and ship method: ES_40 x Battery 12HX330-
    Leaving Get_Order_Line_Info
    I am getting the sales order number 10000178 in sales order info: 1.1-1-1-Closed-10000178
    but how to get it in the report...

    Dear Nitishj,
    If the strategy is MTS then in my understanding you cannot get any sales order order number with reference to
    production made
    Reason is in MTS production will be made collectively without reference to sales order
    where as in MTO it does with reference to sales order
    Regards
    Madhu

  • S_ALR_87013611 Report

    Experts,
    We recently moved from 4.7 to ECC 6.0 version - When I am trying the S_ALR_87013611 report, I can see refresh option in the menu in 4.7 where as I don't see it in the ECC 6.0 Version - Is this being removed or is it because of a security issue ?
    All views/options/answers would be duly appreciated and rewarded with points.
    Thanks,
    Nandita

    hi nandita,
    I do not see any referessh button   in ECC 4.7.
    Could you please let me know, where exactly u have see the option?
    Cheers

Maybe you are looking for