Standard report to check Equipment-WBS-Material-Asset No
Hi All,
Is there a report to have a look equipment no, which is belong to WBS, material and Asset no.
Normally i open using IE03. Any standard report to shows all part in 1 report ?
Please advice.
Thanks a lot.
Nies
ok
Similar Messages
-
Standard report to check total cost (WIP) or before transfer to fixed asset
Hi All,
Is there any standard report to check total cost work in progress (WIP) or cost before we transfer to FXA (fixed asset)
Please advice.
Thank you.
NiesHi,
You can use the report RKA_SETTLE_TABLES_COMPARE for finding the WIP awaiting settlement. You need tp pass object number for executing this report. For getting the object number, you can use report:RKACSHOW.
If useful, please close the posting.
Regards
Muraleedharan.R -
Is there standard report to get the WBS by using asset number
Dear All,
Please advice, is there any standard report to get the WBS by using asset number ?
Thank you.
NiesWe can get WBS report by using costcenter - S_ALR_87011966
-
Is there standard report to check actual (GR) based on project/ WBS
Hi All,
Is there any standard report to check actual based on project / wbs. At the moment i know the tcode CJ74.
Is there any other report ?
Thank you.
Best Regards,
Denis EvitantoHi,
Report (S_ALR_87013542) is most effective report for projects as planned cost / actual cost / Project profitability will be obtained from there.
Planed cost of the project will be obtained from the report. E.g. if you are doing project costing through Cost elements, in the mentioned report, all the cost planned through various Cost elements will be obtained. After posting actual cost to project, there can be comparison of planned cost Vs actual cost.
Hope this will help you.
Best Regards,
Rakesh Pradhan -
Standard Report to check consumption values for multiple materials
Hi,
Is there any standard report to check "consumption" values for multiple materials? The user needs to check the consumption values over a period of time for multiple materials (VERP, ROH) before deciding the re-order and safety stock values for them. Any help on this will be greatly appreciated.
Thanks,
SwapnilDear Swapnil,
Report MCRE is widely used for the material cosnumption than checking in COOIS.
Also these reports can help you.
MCPF Material analysis: Dates
MCPO Material analysis: Quantities
MCPW Material analysis: Lead time
Regards
Mangalraj.S -
Report to check project-wbs-requesting co.code-company code in assignment
Dear All,
Is there any standard report to check Requesting co.code and company code (assignment tab) by project and wbs. I tried CNS43 but there is no requesting company code.
Can we use SQ01 to create this one ? Any one can advice me how to make query for this concern.
Please advice.
Thank you
NiesHi,
You can use SQ01 for this. Query the table:PRPS.
The fields you require are:
PRPS-PBUKR
PRPS-ABUKR - Requesting company code.
Muraleedharan.R -
The standard report for BOMs of a material with a selected period?
Hi Gurus
Is there any standard report for BOMs of a material with a selected period?Hi,
You will have to develop a report for your requirement,
The following tables will be used for the report
MAST-WERKS
STPO-MATNR
MARA-MAKTX
STPO-BMENG
STPO-POSNR
STPO-IDNRK
STPO-MAKTX
STPO-DATUV
STPO-MENGE
STKO-MEINS
STPO-AVOAU
Regards
Merwyn -
Standard report to check MRP status
Hi,
Is there any standard reports to check the materials based on the MRP status? (Eg: Materials that are under A(Free and avilable) etc etc)
Im using SAP 6.0
Thanks in advance.Hi,
1. MD04 - Stock requirement list
2. MD05 - MRP list
3. MD06 - MRP list collectively
4. MD07 - Stock requirement list collectively.
Please see if need anything more.
Regards,
Anil -
Standard report to check transfer quantity from inspection lot
Hi All,
Upon good receipts using movement type 101, an inspection lot will be created automatically in the system.
After that, inspection results and usage decision will be done.
So at the end, if I display that particular inspection lot using QA03, in the "Insp. lot quantities" tab, when I click at button "Mat. doc", I will be able to display the transfer material document stating transfer from which storage location to which storage location and how much is the quantity.
For reports checking purpose, I need to check every Inspection lot created and then have to know the final destination and how much is the quantity. It doesn't make sense if I have to click one by one from QA03.
Please advice whether there is a standard report for this or any other way possible.
Thank you.Hi,
I have checked your suggestion, but QA33 failed to accomodate my request.
I want to show the material documents created from the inspection instead of the material document during good receipt.
So, I want to link inspection lot, goods transfer material document created and the quantity transfered from the inspection.
Please help again. Thanks. -
Report to check the WBS "system status"
Hello friends,
Would anyone know for a standard report where I can check for the WBS "system status"?
i.e.: I want to know everything I have in AVAC status
Thanks and Regards
AlexYou can get the system status of WBS in CN41, Execute the report , after it use the change layout option, select status.
System will display you user / system status for all the PS Objects.
With Regards
Nitin P. -
Standard Report, for checking the PR approval status by a certain User
Hello Experts,
Is there any standard report in the SAP where we can find out for the given managers, if level 1 approver is Mr. X, then which all has been approved by Mr. X and and pending with subsequent approvers?
Please help.
thanks and regards,
Yawar KhanHi,
Yes, standard report is available for PR approval status list using T-code ME5A - List Display of Purchase Requisitions and the following input data's are given .
Purchasing Group : ___
Scope of List : ALV
Plant : _____ (if required)
- Assigned Purchase Requisitions to be ticked.
- Released Requisition Only to be ticked.
- Requisition for overall Release to be ticked.
- Requisition for Item-wise Release to be ticked.
Now execute the report and then report top layout button click for 'Release indicator' option selected for released status confirmation purpose. If release indicator status is 'X' means PR released, otherwise PR is not released.
Hope, it is useful for you.
Regards,
K.Rajendran -
Report to check Standard WBS link to which standard network and activity
Dear All,
Is there any way or standard report to check standard WBS (cj93) link to standard network/activity (CN03).
Normally we create project by using template existing, we would like to check the structure. Is there any way to check the standard template for it ( WBS template link to network/activity template).
Thank you.
NiesHi,
Please try this:
1. Tcode : CN41
2. Change database profile: In that in the origin check mark the Standard structure. Continue..
3. At the bottom of the selection screen check mark the standard structures.
4. In the selction area for the Project hit F4 and select the project based on the standard WBS Element.
5. Exceute the report.
Hope this is useful.
Reward points if found useful.
thanks.. -
Report to Check material attach in CJR2 (detail planning)
Hi All,
Is there any report to show which material that i already input in CJr2 (detail planning)
Step 1. CjR2
2. choose layout 1-701 CE planning
3. Input WBS and CE
4. Go to edit and detail planning
5. Input material no dan plant , quantity, when it save it goes to the total value. But i could not find report to show material that was assigned.
Plz advice.
Cheers,
NiesHi Sreenivas,
I go to CJR2
Then I put WBS element : let say ABCD
Cost element : 630600
Then I select august and go to Edit - detail planning
I choose item category M and put material number and qty
then save it and post
After that i try to use standard report S_ALR_87013532 ..its only show the plan cost.
I wish there is standard report to check which material has been assigned in the WBS and CE.
Cheers,
Nies -
Standard Report check whether Goods Issue has been performed for DN
Hi All,
My users is having a list of DNs where they would like to check if Post Goods Issue has been performed for them. I would like to ask is there any standard reports as to check if a Delivery Note has PGI performed?
I have tried report VL06G but in this report we cannot give the DN No. as the key.
Thanks.There is no standard reports to check GI by DN number.
You have to find out the Outbound Number first then check by Outbound number.
In SE16N, key VBFA table
Pump in your DN number under "Follow-on doc."
Under "Prec.doc.categ." select "J".
with the outboud number, you can proceed to check using above report suggested.
Alternatively, using same VBFA table. Pump in list of outbound number under "Preceding Doc." and select "Subs.doc.categ." as "R".
If you can set-up query reports, you can also get all the information directly with the DN Numbers. -
Standard report for material price change documents
Hi Friends,
Is there a standard report which lists all the material price change document?
To view the document individually t-code CKMPCD can be used, but I need a report which lists all the documents for a specified period of time.
Thanks a lot for all the efforts.
Regards,
ShilpiHi,
I do not know a standard report but an infoset+query created based on logical database BRM and BKPF-AWTYP = PRCHG (price change), BKPF-BUDAT (posting date),... and some BSEG-fields will give you the posted amounts. The original document (=corresponding price change document) number can be seen in BKPF-AWKEY.
best regards, Christian
Maybe you are looking for
-
just bought a new phone and want to delete everything off my old phone so I can sell it. How do I do this?
-
Using find my iphone while roaming without notifications activated
Hello, I used to be able to use "Find my iPhone" while roaming internationally without have push notifications on (iOS 4.x.x.) but now with iOS 5 there isn't a way to use that feature without enabling notifications as well. In Settings>General>Networ
-
How can I uninstall Oracle 10g express edition(Western European).
Hi I tried to install Oracle 10g express edition(Western European) in my laptop which is having windows vista home basic, but it was not installed properly so that I remove the related files in the program files, and i again tried to install Oracle 1
-
HP DV5 1110EM DTS sound to av receiver NO GO HELP PLEASE
Hi I have a Pavilion dv5 1110em it has hdmi and is capable of 7.1 sound from the hdmi port. I'm playing MKV files via laptop hooked up to my lcd, the laptop is connected to my sony strdg 800 receiver via hdmi. My problem is i cannot get normal 5.1 dt
-
Image Map Linked to Text w/in Same Topic (RoboHelp 10)
I would like to create an image map using certain text that resides in the same topic as the image. I do not want the user to see the text when viewing online; I only want them to see the pop-up when they click on the mapped image. I do, however, wan