Standard report to check transfer quantity from inspection lot

Hi All,
Upon good receipts using movement type 101, an inspection lot will be created automatically in the system.
After that, inspection results and usage decision will be done.
So at the end, if I display that particular inspection lot using QA03, in the "Insp. lot quantities" tab, when I click at button "Mat. doc", I will be able to display the transfer material document stating transfer from which storage location to which storage location and how much is the quantity.
For reports checking purpose, I need to check every Inspection lot created and then have to know the final destination and how much is the quantity. It doesn't make sense if I have to click one by one from QA03.
Please advice whether there is a standard report for this or any other way possible.
Thank you.

Hi,
I have checked your suggestion, but QA33 failed to accomodate my request.
I want to show the material documents created from the inspection instead of the material document during good receipt.
So, I want to link inspection lot, goods transfer material document created and the quantity transfered from the inspection.
Please help again. Thanks.

Similar Messages

  • Standard report to check total cost (WIP) or before transfer to fixed asset

    Hi All,
    Is there any standard report to check total cost work in progress (WIP) or cost before we transfer to FXA (fixed asset)
    Please advice.
    Thank you.
    Nies

    Hi,
    You can use the report RKA_SETTLE_TABLES_COMPARE for finding the WIP awaiting settlement. You need tp pass object number for executing this report. For getting the object number, you can use report:RKACSHOW.
    If useful, please close the posting.
    Regards
    Muraleedharan.R

  • Is there standard report to check actual (GR) based on project/ WBS

    Hi All,
    Is there any standard report to check actual based on project / wbs. At the moment i know the tcode CJ74.
    Is there any other report ?
    Thank you.
    Best Regards,
    Denis Evitanto

    Hi,
    Report (S_ALR_87013542) is most effective report for projects as planned cost / actual cost / Project profitability will be obtained from there.
    Planed cost of the project will be obtained from the report. E.g. if you are doing project costing through Cost elements, in the mentioned report, all the cost planned through various Cost elements will be obtained. After posting actual cost to project, there can be comparison of planned cost Vs actual cost.
    Hope this will help you.
    Best Regards,
    Rakesh Pradhan

  • Standard report which importe personnel number from  one server to other

    Dear Hcm Gurus.
    Is any standard report exist in SAP Which imports Personnel number from one server to other server which are maintained in Source server ,imported all contents maintained in source server.
    e.g  An employee is hired in  u201C Server Au201D and personnel number  is generated internally while we want to imports same employee data with same personnel number in Server u201CBu201D
    IS it possible ? if is kindly do help and clarify any standard report which import complete data from one server   to other server with all its infotypes.
    barket

    Hi,
    a standard way should be setting up an ALE scenario between the two systems to transfer employee data and keep them updated. This needs a bit more set up than a single report to be run but it is a common way to create HR landscapes where different local HR systems consolidate data to a centralized system.
    The other options are valid, too. But I know them more for transfering data for test or validation reasons.
    If you could add some more information to the business background of your requirement we could add give a better suggestion which solution to head for.
    Kind Regards
    Roman

  • Standard report to check MRP status

    Hi,
    Is there any standard reports to check the materials based on the MRP status? (Eg: Materials that are under A(Free and avilable) etc etc)
    Im using SAP 6.0
    Thanks in advance.

    Hi,
    1. MD04 - Stock requirement list
    2. MD05 - MRP list
    3. MD06 - MRP list collectively
    4. MD07 - Stock requirement list collectively.
    Please see if need anything more.
    Regards,
    Anil

  • Standard Report to check consumption values for multiple materials

    Hi,
    Is there any standard report to check "consumption" values for multiple materials? The user needs to check the consumption values over a period of time for multiple materials (VERP, ROH) before deciding the re-order and safety stock values for them. Any help on this will be greatly appreciated.
    Thanks,
    Swapnil

    Dear Swapnil,
    Report MCRE is widely used for the material cosnumption than checking in COOIS.
    Also these reports can help you.
    MCPF                 Material analysis: Dates                
    MCPO                 Material analysis: Quantities           
    MCPW                 Material analysis: Lead time            
    Regards
    Mangalraj.S

  • Standard Report to upload Master Data from Excel files

    Hi,
    I am testing some configuration items and I am in need of master data for various scenarios, which is not available in the system now. Is there any standard report that will read data from an excel sheet and upload the corresponding infotypes? This will be of great help.
    Thanks
    K

    Hi,
    As far as I know, there is no standard report in SAP for master data load using excel sheet. You have write a custom z-program with the help of BDC for basic actions or for individual infotypes upload you can use 'Fast Entry' for quickly uploading data for any perticular infoype using Tcode PA30.
    Hope this helps.
    Thanks,
    Sarika.

  • Standard report show the confirmed quantity in sales order

    Hello
    i'd like to know t-code for report show the confirmed quantity and the remaining quantity of sales order
    For example : i create sales order with quantity (1000) and the quantity of material in storage location 600 , so i want report display the confirmed quantity ( 600) and the remaining quantity (400)
    Thanks

    Search the forum before posting.  Check in VA05
    G. Lakshmipathi

  • Transfer Quantity from Project to another

    Hello Dears,
    My Scanairo is :
    allocate the quantities on the project in the inventory by Move order , if i used some quantities and want to transfer the other to another project or return to the inventory.
    how can i do this?
    thanks

    Hi
    I understand you have item on hand quantity in Inventory.
    Assuming you have enabled Project Manufacturing then inventory on hand quantities are kept on separate locators, based on projects and tasks.
    Items you purchased for a project are received into inventory at a project locator, and costs are interfaced to Oracle Projects as actual costs of that project.
    In Inventory you can use the transaction - Project Transfer that will move quantity from one project to another. The value of such transaction is interfaced to Oracle Projects as two expenditures - one negative that credit the original project costs, and the second is positive value added to the receiving project costs.
    Dina

  • Standard Report, for checking the PR approval status by a certain User

    Hello Experts,
                          Is there any standard report in the SAP where we can find out for the given managers, if level 1 approver is Mr. X, then which all has been approved by Mr. X and and pending with subsequent approvers?
    Please help.
    thanks and regards,
    Yawar Khan

    Hi,
    Yes, standard report is available for PR approval status list using T-code ME5A - List Display of Purchase Requisitions and the following input data's are given .
    Purchasing Group                  :    ___
    Scope of List                         :  ALV
    Plant                                       :  _____  (if required)
    -  Assigned Purchase Requisitions to be ticked.
    -  Released Requisition Only to be ticked.
    -  Requisition for overall Release to be ticked.
    -  Requisition for Item-wise Release to be ticked.
    Now execute the report and then report top layout button click for  'Release indicator' option selected for released status confirmation purpose.  If release indicator status is 'X' means PR released, otherwise PR is not released.
    Hope, it is useful for you.
    Regards,
    K.Rajendran

  • Standard report to check Equipment-WBS-Material-Asset No

    Hi All,
    Is there a report to have a look equipment no, which is belong to WBS, material and Asset no.
    Normally i open using IE03. Any standard report to shows all part in 1 report ?
    Please advice.
    Thanks a lot.
    Nies

    ok

  • Raw material issue for inspection from inspection lot

    Hello friends,
    My sample size is fixed i.e.75 gm for all  raw material quality testing. I have defined sampling procedure with sampling type "fixed sample". I want that this amount should be decreased from total lot quantity when i am posting it to unrestricted use. i.e. for 10 kg inspection lot quantity, 9.925 kg quantity should be posted .Now, system propose whole quantity for stock transfer from quality to unrestricted after usage decision.
    Waiting for reply!
    Thanks in advance!!

    Dear Kiran
    1)  System doesnot take decimal in samples. if your basic unit is KG and you procure 10kg material system will consider sample amount as 1 kg. it will not take 0.075kg as the sample.
    2) Other option is make the procurement in GMs but that  will be difficult for purchaser to handle
    3) or esle make use of this exit and do the posting based on that
    QEVA0009 - UD: Predefinition of quantity to be posted to sample stock 
    This will help
    Regards
    Gajesh

  • Automatic WM transfer order during inspection lot posting to non-WM-sloc

    Hi All,
    I have a question in regards of automatic creation of WM-transfer orders during QM-inspection lot posting from a WM-storage location to a non-WM-storage location:
    - MIGO IM-posting: goods receipt with reference to purchase order to a WM-storage location
    => inspection lot automatically created
    => WM-stock is located on 902 GR area external rcpts / stock category Q
    - Inspection lot: enter result and usage decision with posting of inspection lot stock to a non-WM storage location into the blocked stock
    A transfer requirement (movement type 311 / destination u201C921 Transferu201D) is created after the inspection lot posting (QA11) but the auto-creation functionality is not possible since the u201CSystem cannot find source storage binu201D.
    How can this auto-creation of a transfer order be realized since it is possible to create the transfer order manually via LB11 (entering source u201C902u201D / storage bin u201CPurchase Order no.u201D)?
    The system cannot find the storage bin automatically.
    Thank you in advance!

    Hello,
    I do not understand your scenario , u are saying are posting inspection lot to non WM storage location and again saying system can not find bin automatically.
    "A transfer requirement (movement type 311 / destination u201C921 Transferu201D) is created after the inspection lot posting (QA11) but the auto-creation functionality is not possible since the u201CSystem cannot find source storage binu201D.
    How can this auto-creation of a transfer order be realized since it is possible to create the transfer order manually via LB11 (entering source u201C902u201D / storage bin u201CPurchase Order no.u201D)?
    The system cannot find the storage bin automatically.
    Thank you in advance!"
    Please let me know are u using quality interim storage area. If you clear material from quality and want material to go to bin then it should be warehouse managed storage location. 
    Regards,
    Prashant

  • Three Physical Samples withdraw from inspection lot 04  and then result record for all three

    Dear Gurus,
    We have 3 quality labs and each lab is sent a separate samples to inspect certain characteristics once we receive material from production. I have created an inspection plan and mapped these three labs as  work center in operation and then assigned MICs under each operation to inspect.
    Now my issue is how to map separate 3 samples to inspection lot generated from production  ( type-4) and also how to configure that to inspection plan.
    I have to result record for all these three physical sample as withdrawn from Lot based upon inspection plan as mentioned above.
    I can mention sample drawing procedure in inspection plan but how to map actual sample there.
    Any help will be greatly appreciated.
    Regards,
    Satish

    Hi Satish
    You are creating three operation for depicting three testing Labs.
    Against each lab (operation) you had assigned MICs as per your requirement.
    Now you have to assign a SDP along with inspection point type 200 for physical sample in task list.
    After prod confirmation system will create inspection lot along with a sample by default for 1st operation.
    For other operations you have to create samples manually referring the same inspection lot (QPR6).Remember to click ' Create Insp points' and mention operation.
    Release the samples in QPR4.
    Now when you go for result recording system would ask first for operation, so select the operation , then system will ask for insp point (sample no).There click on assign insp point , so system will provide the Sample no which were created in QPR6 for that particular operation.
    Please follow the steps and revert.
    Regards
    D Mohanty

  • How to remove block from inspection lot

    I would like to know how to remove a block from an inspection lot

    Clifton,
    Execute transaction QA02, input your inspection lot number and enter. In the change Inspection Lot: Origin screen, from Menu bar Inspection Lot-->Functions->Unblock Lot and now save the lot.
    Regards,
    Prasobh

Maybe you are looking for

  • [ OAS 10.1.2.0.2 ] Convert J2EE 1.4 webapp to J2EE 1.3

    Hi, I have a project nicely running under tomcat 5.x and OC4J standalone 10.1.3 ... Both rely on J2EE 1.4 accroding to what i understood ... But production environnement is OAS 10.1.2.0.2 ... relying on J2EE 1.3 :( Deploying the war don't work of cou

  • How do I add a set value to a form field calculation?

    I'm creating a form where I need a set value added to the sum of other editable fields - e.g. Field A + Field B +$125 = Sum For the addition of Field A and B I've been using the pre-set functions in Adobe X, but I'm clueless as to how to add the $125

  • I want it to letterbox!!

    I've searched through these discussions and found only people who don't want iMovie to automatically letterbox their footage... Well, I DO want it to do mine (I do have the automatically letterbox option checked.) I imported an hour of footage, and t

  • Adding custom text to a notification having Embedded Region

    Hi All, Could you please help us in the following situation. We have a requirement to add a custom message (pulled from Database) to a notification which was build on &HR_NTF_EMBEDDED_REGION. When I tried the HTML body of the notification as below: <

  • Idoc error (Account vendor no. is currently blocked by user user name )

    Hello , I am sending a cremas idoc from external system (XI) to R3 But the idoc doesnt get posted. It throws the following error 51 Account <vendor no.> is currently blocked by user <user name(login id for R3)> I tried resending this idoc using tcode