Standard report to show Raw Material which has been consume

Hi,
My plant controller would like to know for particular of raw material has been consume by which style number for particular period of time. Example:- Material A has been consume by style number A - 6 pc, B - 4 pc and C - 2 pc
Do SAP has standard report to display all this information.
Pls. help.

Hi,
Use t-code COOIS and follow below activities -
List - Documented goods movement ---> production order ---> plant ---> Execute
All the components will appear with movement type 261 and 101.
select only 261 movement type materials.
These are your RAW material which has been consumed against subjected production order.
Thanks,
Rampreet Jaiswal

Similar Messages

SAP standard report to show Inter Company transactions

Basically, we have two companies that are buying and selling between each other. One of the companies is a subsidery of the other. So, the parent(x) can sell or buy from it's sub(Y) and visa versa. At the end of the period, we need to consolidate both companies for reporting purposes, therefore there will be elimination entries which should be identified.
I need an SAP standard report to show these transactions which might still be sitting on each other books unsold

Dear :
We are using ECC 6 SAP version and we have the t code FBU3 for displaying all inter company transactions. Have you done necessary configuration in OBYF. You can display all related inter company transactions through FBU3.
Your 2nd query corresponds to same credit control area that was assigned to two company codes. In order extend credit limit for a customer who is extended on two company codes which have same credit area. It is not possible you distinguish credit limit for a customer who is extended on two company codes having same credit control areas. CCA is defined at organization structure level and for the distinction you will have to define new credit control area in customization at
enterprise level i-e
Enterprise Structure.... Definition.... Financial accounting....define credit control area
Assignment.....Assign credit control area to co code
Do necessary customization for SD module
and then in credit management for AR you will have to assign the credit control area to company codes i-e
Account Recv/A/c Payable.....Credit Management.... Assign permitted CCA to Co code
. This is the only way to to segregate customer credit limit for two company codes. Please revert in case of any confusion.
Regards

Any standard report to show WBS,settlement, asset no and asset cost/value

Hi All,
Please advice . Is there any standard report to show WBS,settlement, asset no and asset cost/value ? I tried tcode kosrlist_pr but it does not show asset cost/value.. it shows only WBS,settlement and asset no.
Thank you.
Best Regards,
Nies

Dear,
der is no such standard report to show WBS,settlement, asset no and asset cost/value as perv my knowlwdge. so do one thing select one standard report which is more similar to standard report to show WBS,settlement, asset no and asset cost/value but some of like asset no or asset cost or some other values not reflecting in that std report. den u take the Table name and field name of that particular fields which u wann reflect in the report. use the logic of STD TC of SAp which more similar to which u wanna preapre the New TC. tae help of Abaper. tell ur querry and content of ur report . he will definately do it
if ur get my ans reward with points
Regards
Rakesh

Report based on a ITEM (which has SQL statement)

Hi everyone,
I have a created a form based on a table which has 1 column that stores SQL statement in the database.And i am displaying the SQL statement in TEXT AREA FILED.
What i want to do is to create a report based on that SQL statement (Which is in the TEXT AREA field on the same page).I tried to create a report region with
:P25_SQL_STATEMENT.But i am getting an error
----->invalid query, no select statement found.
How can i do a report based on the item which has SQL query in it.
Thanks
phani
.

Hi Jkallman,
Thanks for the reply.I have a (FORM WITH REPORT) on a table which has column of SQL_STMNT VARCHAR2(2000 BYTE) which takes the SQL statement entered from the FORM.
1.I have a report which shows all the records in the above mention table on page 10
2.If i hit the edit button in the report i go to page 11 which i have the FORM on the above mentioned table.In that form i have a field :P11_SQL_STMNT.
3.I am trying to create a report on the same page 11 based on the SQL query of that :P11_SQL_STMNT.
4.I did the follwoing steps
--> create a region
----> report
---->sql report
and entered the following code.
begin
return (:P11_SQL_STMNT);
end;
but it is giving me the error which i mentioned in the previous post.If u need any more details i can provide
Thanks in advance
phani

Do we have standard report to show sale order stock with amount?

Do we have standard report to show sale order stock with amount?
I try to use MB5B and MBBS but they don't show value.
MB5B show only qty
MBBS no any report.
Please kindly help.
Thank you very much.

Okay Thank you very much for your suggestion.
I think I have to create a new ZProgram. T_T

Is their a Standard Report to show me Invoices without PO's raised against?

As title states im looking for a standard report to show me any invoices that have no PO's raised against them?
Any help on this appreciated greatly!

Hi,
MR11 does not result in an update if you select the correct option ("prepare list" at the bottom). so simply select the "GR/IR clearing Account" option.
Also use a large tolerance so that you get everything.
But I am still not sure how you have entered invoices without POs, was something other than MIRO used? If so then MR11 may not help either because this depends on POs.
If you HAVE used something other than MIRO I doubt if you can get such a list without some clever ABAP, after all you don't have to specify the PO ever if you are doing a two way match through the FI functions instead of using MIRO. So there would not be a standard report.
Steve B

I have a new MacBook Pro with OS10.8.2 and cannot get Contacts to print a list of addresses with pictures showing. There is a check box selecting "picture" which has been checked - but no picture. This worked fine on OS10.7.5. Problem??

I have a new MacBook Pro with OS10.8.2 and cannot get Contacts to print a list of addresses with pictures showing. There is a check box selecting "picture" which has been checked - but no picture. This worked fine on OS10.7.5. Problem??

First, back up all data immediately, as your boot drive might be failing.
There are a few other possible causes of generalized slow performance that you can rule out easily.
Reset the System Management Controller.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Check your keychains in Keychain Access for excessively duplicated items.
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

How do I see a book which has been downloaded, but does not show in Adobe Reader XI?

How do a find a ePub book in Adobe Reader XI, which has been downloaded and does not show up? janf76607913

Visit:
Adobe Digital Editions
Be well...

Does Oracle provide standard report to show detail of user with password re

Hi,
We are currently using Oracle HRMS R12.0.6. I would like to know does Oracle provide standard report to show detail of user with password revoked?
Appreciate advise.
Thanks and Regards,
Shiau Chin

Develop a package to do it if you need the password. Create the packages . Execute the SQL to determine the password. Make sure you replace the &USER_NAME with the USER NAME at the end..
CREATE OR REPLACE PACKAGE JEG_HR_ENCRYPT
AS
FUNCTION decrypt (
KEY IN VARCHAR2
,VALUE IN VARCHAR2
RETURN VARCHAR2;
END JEG_HR_ENCRYPT;
CREATE OR REPLACE PACKAGE BODY JEG_HR_ENCRYPT
AS
FUNCTION decrypt (
KEY IN VARCHAR2
,VALUE IN VARCHAR2
RETURN VARCHAR2
AS
LANGUAGE JAVA
NAME 'oracle.apps.fnd.security.WebSessionManagerProc.decrypt(java.lang.String,java.lang.String) return java.lang.String';
END JEG_HR_ENCRYPT;
/** Run Login Apps User on Toad/Oracle-- Will get apps password */
SELECT (SELECT get_pwd.decrypt (UPPER ((SELECT UPPER (fnd_profile.VALUE ('GUEST_USER_PWD'))
FROM DUAL)), usertable.encrypted_foundation_password)
FROM DUAL) AS apps_password
FROM fnd_user usertable
WHERE usertable.user_name LIKE UPPER ((SELECT SUBSTR (fnd_profile.VALUE ('GUEST_USER_PWD')
,1
, INSTR (fnd_profile.VALUE ('GUEST_USER_PWD'), '/')
- 1
FROM DUAL));
SELECT usertable.user_name,
(SELECT jeg_hr_encrypt.decrypt
(UPPER
((SELECT (SELECT jeg_hr_encrypt.decrypt
(UPPER
((SELECT UPPER
(fnd_profile.VALUE
('GUEST_USER_PWD'
FROM DUAL)
usertable.encrypted_foundation_password
FROM DUAL) AS apps_password
FROM fnd_user usertable
WHERE usertable.user_name LIKE
UPPER
((SELECT SUBSTR
(fnd_profile.VALUE
('GUEST_USER_PWD'),
1,
INSTR
(fnd_profile.VALUE
('GUEST_USER_PWD'),
- 1
FROM DUAL)
usertable.encrypted_user_password
FROM DUAL) AS encrypted_user_password
FROM fnd_user usertable
WHERE usertable.user_name LIKE UPPER ('&USER_NAME')

I have a iPhone 4s, which has been working fine until now. Charge phone overnight and within 2 hours dead. Put it on charger and shows charging but that's it. Battery not showing any charge.

I have a IPhone 4s, which has been working great until now. Don't know if has any thing to do with the latest updates. Charged it over night and then two hours later it was dead. Didn't even used it. Placed on charger and the charging icon shows but battery not.

Hello, M_Bilal
Welcome to the HP Forums.
That you for provided such a detailed post with what you've already completed, for the issue with your battery. I will try to guide you further.
I would like to provide you further documents for troubleshooting, but you've essentially completed what I have for this issue. The only step left, would be to test the battery.
You can do this with another battery, or in another notebook. I know you mention another machine, but if you know someone who does or someone who has a compatible battery. This would test that. You could even see if a local computer shop could test it.
The reason for this, is if the battery is the problem, it's much easier and more affordable replacement. Also, you mention it being new, might have warranty.
The other possible cause to the issue you've touched on, that would be the system board. Testing the above, would just confirm if this is the problem or not. From there you could decide on what you'd like to do.
I know, there really aren't many suggestions here, but I hope this can provide you with the next step.
Let me know how things go, with the route you choose to troubleshoot.
Thank you for posting on the HP Forums.
I worked on behalf of HP.

HT4623 i disconnected my iphone 4 while it was updating and now its frozen, the screen is showing a apple logo and a loading bar which has been for 9hrs now. please help

i disconnected my iphone 4 while it was updating and now its frozen, the screen is showing a apple logo and a loading bar which has been for 9hrs now. please help

It's not uncommon for it to not work the first time and sometimes, you have to try it a few times. Turn off your antivirus software and your firewall while you are trying to restore the iPad. Enable them again after you restore.
If that still won't work, post back with detailed information as to what exactly does happen as you go through the process.

I have a 5s which has been working fine until about a week ago when any calender event added to my phone will not sync with my enterprise server. Any calender event entered on my PC (enterprise) does show on my phone. Mail is working fine both ways,ideas?

i have a 5s which has been working fine until about a week ago when any calender event added to my phone will not sync with my enterprise server. Any calender event entered on my PC (enterprise) does show on my phone. Mail is working fine both ways,ideas?Iphne 5s and enterprise

See my reply to this message:
https://discussions.apple.com/thread/2557520?start=15&tstart=0
The problem is that the POP3 client is not issuing a DELE command to remove the email from the server.

How can I know the new Material Master has been created?

Does anyone have been tried about how to trigger the new Material Master has been created at a time interaval(maybe an hour or a day)?
I want to transfer the new Material Master within a given period from SAP R/3 4.6C to .NET Application through standard BAPI or RFC and .NET Connector 2.0. How can I do?
Any suggestion is wellcome. Thank You.

Thank you Jiri Ehrlich for answering my question..
I choose the third way as you suggest..
".. 3) Create your own ABAP function to export whole Material Master, call this function from your .NET application and do synchronizing on .NET side (so your .NET application will be RFC client).."
I've tried RFC that retrieve Material Detail by using BAPI_MATERIAL_GETLIST. It works fine but if I want to retrive the new Material or modified within a given period of time(for example 15 or 30 minutes). How I can do? Is there any standard BAPI or RFC to call from .NET or I have to write new RFC.
I have little background of ABAP so help me please. If I have to create new RFC, is there any ABAP Function to call or which table I can retrive those information.
Anyone can suggest?? Thanks in advance

I have an early 2011 MacBook Pro which has been running slow for a while. After looking at responses to similar problems I have downloaded and run EtreCheck and will post the output. Please can someone help me with what it all means.Thanks in advance

I have an early 2011 MacBook Pro which has been running slow for a while. After looking at responses to similar problems I have downloaded and run EtreCheck. Please can someone help me with what it all means.
Thanks in advance.
EtreCheck version: 1.9.15 (52)
Report generated 19 September 2014 08:07:14 GMT+8
Hardware Information: ?
MacBook Pro (13-inch, Early 2011) (Verified)
MacBook Pro - model: MacBookPro8,1
1 2.3 GHz Intel Core i5 CPU: 2 cores
4 GB RAM
Video Information: ?
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1280 x 800
System Software: ?
OS X 10.9.4 (13E28) - Uptime: 0 days 0:4:29
Disk Information: ?
Hitachi HTS545032B9A302 disk0 : (320.07 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 319.21 GB (147 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R   UJ-898
USB Information: ?
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ?
Apple Inc. thunderbolt_bus
Gatekeeper: ?
Mac App Store and identified developers
Kernel Extensions: ?
[not loaded] com.seagate.driver.PowSecDriverCore (5.2.4 - SDK 10.4) Support
[not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.2.4 - SDK 10.4) Support
[not loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.2.4 - SDK 10.5) Support
[not loaded] com.seagate.driver.SeagateDriveIcons (5.2.4 - SDK 10.4) Support
[loaded] com.sophos.kext.sav (9.1.55 - SDK 10.7) Support
[loaded] com.sophos.nke.swi (9.1.50 - SDK 10.8) Support
Launch Daemons: ?
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[running] com.sophos.autoupdate.plist Support
[running] com.sophos.configuration.plist Support
[running] com.sophos.intercheck.plist Support
[running] com.sophos.notification.plist Support
[running] com.sophos.scan.plist Support
[running] com.sophos.sxld.plist Support
[running] com.sophos.webd.plist Support
[running] com.trusteer.rooks.rooksd.plist Support
Launch Agents: ?
[loaded] com.divx.dms.agent.plist Support
[loaded] com.divx.update.agent.plist Support
[running] com.sophos.uiserver.plist Support
[running] com.trusteer.rapport.rapportd.plist Support
User Launch Agents: ?
[loaded] com.adobe.ARM.[...].plist Support
[running] com.amazon.music.plist Support
[loaded] com.google.keystone.agent.plist Support
[not loaded] jp.co.canon.Inkjet_Extended_Survey_Agent.plist Support
User Login Items: ?
iTunesHelper
TomTomHOMERunner
AdobeResourceSynchronizer
Dropbox
Internet Plug-ins: ?
FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
DivX Web Player: Version: 3.2.1.977 - SDK 10.6 Support
AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 Support
AdobePDFViewer: Version: 11.0.09 - SDK 10.6 Support
Flash Player: Version: 15.0.0.152 - SDK 10.6 Support
EPPEX Plugin: Version: 10.0 Support
Default Browser: Version: 537 - SDK 10.9
OVSHelper: Version: 1.1 Support
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.4.4 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0 - SDK 10.7
Safari Extensions: ?
Ultimate
Audio Plug-ins: ?
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins: ?
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes: ?
Flash Player Support
Perian Support
Trusteer Endpoint Protection Support
Time Machine: ?
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 297.29 GB Disk used: 160.38 GB
Destinations:
Data [Network] (Last used)
Total size: 2 TB
Total number of backups: 99
Oldest backup: 2012-04-20 17:05:32 +0000
Last backup: 2014-09-18 23:49:25 +0000
Size of backup disk: Excellent
Backup size 2 TB > (Disk size 297.29 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU: ?
      6% InterCheck
      5% iCalExternalSync
      3% WindowServer
      2% CalendarAgent
      2% SystemUIServer
Top Processes by Memory: ?
152 MB SophosScanD
147 MB InterCheck
106 MB SophosAntiVirus
66 MB Dropbox
57 MB com.apple.iTunesLibraryService
Virtual Memory Information: ?
161 MB Free RAM
1.55 GB Active RAM
1.41 GB Inactive RAM
902 MB Wired RAM
611 MB Page-ins
0 B Page-outs

Uninstall Trusteer software
http://www.trusteer.com/support/uninstalling-rapport-mac-os-x
Remove Sophos
https://discussions.apple.com/message/21069437#21069437

How to extract client source ip, which has been embedded in http header?

Can someone please tell me how to extract the client source ip which has been embedded in http header?
the web server is running SunOS 5.8 and iPlanet6.0sp6
Thanks.

Clear the cache and cookies.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies":
*Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"
Create a new profile as a test to check if your current profile is causing the problem.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer some files from an existing profile to the new profile, but be cautious not to copy corrupted files to avoid carrying over the problem
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
*https://itunes.apple.com/us/app/bitdefender-virus-scanner/id500154009?mt=12

Standard report to show Raw Material which has been consume

Similar Messages

Maybe you are looking for