Standard report which can show the details of Invoice value and PO value

Hi all,
Is there any standard report which can show the details of Invoice value is more than 5% of PO value. MIRO value and PO value.
If any report which caters the maximum requirement is also fine
Regards
Sanjith
Edited by: Sanjith Sethu Lekha on Dec 6, 2011 2:42 PM

Hi
Please refer the below mentioned link
/thread/1789934 [original link is broken]
Regards
Praveen P C

Similar Messages

R/3 report that can show the inventory aging

Hi Gurus,
Pls adv whether there is any R/3 report that can show the inventory aging. We know there is a BW report RDD861 can serve this purpose but we would like to have same report pulled from R/3.
please advice asap and do the needful.
Regards
KRISHNA

Not sure exactly what your complete requirements are but you could try the following standard reports to see if any fit your needs.
Real-Time
MC50 - Dead stock
MC46 - Slow-moving items
MC44 - Inventory turnover
LIS Reports
MC.2 - Receipts/issues
MC.3 - Inventory turnover
Regards

In sap is there any report which gives us the details of all prctr group

Hi,
In sap is there any report which gives us the detail of all profit center and their respective profit center group. I need a report or t.code which gives me the details of profit center hierarchy with description and also the associated profit center to it.Is there any report beside t.code KE5X.
With regards

Hello
I like to use TCode KCH6N (Profit Centre standard Hierarchy)
Although this does not give as much Master data info as the TCode you use, it does give description, who responsible and most importantly where in the structure/hierarchy every Profit centre and Profit centre group is in relation to each other.

Can we create a report painter report which shows the details of CC/CE/IO?

Hi,
I am trying to create a report painter report which shows the details of cost elements,cost centers and internal orders in a single section.I am able to create reports with 2 characteristics (like CC/CE or IO/CE etc.) but not with 3 characteristics (CE/CC/IO) which is my case.I am trying to get data something like below.Is this even possible using report painter?I will appreciate if any one could suggest how to do this.
CE          CC                        IO                        Amt
600000 8190001100           1100001                $1000
                                          1100002                $2000
                                          1100003                $3000
                                                                      $4000
620001 8190001101           1100004                $6000
                                          1200001                $2500
. . . . . . . .and so on
Thanks,
Saurabh.

>
But when i am using the same synonym in crystal report design, my report is working fine.. but the same synonym is available as invalid in database..
>
What does 'my report is working fine' mean? Are you saying that if you rerun the query it retrieves fresh data from the database?
What does 'same synonym is available as invalide in database' mean? How are you determining this.
Synonyms can be created for objects that do not yet exist.
create synonym q for table_does_not_exist
select * from user_objects where object_name = 'Q'
SYNONYM_NAME,TABLE_OWNER,TABLE_NAME,DB_LINK
Q,SCOTT,TABLE_DOES_NOT_EXIST,

I downloaded some videos to Premier Elements 13 from external hard drive but now the external hard drive is damaged. I tried to open the videos on the organizer which it shows the video but with a yellow ? and says missing file. Is there anyway I can open

I downloaded some videos to Premier Elements 13 from an external hard drive but now the external hard drive is damaged. While setting up my new MAC the external hard drive was dropped and I have been told by an outside source they could not retrieve the files. It had 4 years of photos and videos on it. I remembered that I had downloaded some of the videos from the external hard drive (before it was broke) to Adobe Organizer 13 when I installed the Adobe 13 on my MACOS X 10.9.5. I tried to open the videos on the organizer which it shows the video but with a yellow ? and says missing file. Is there anyway I can open these videos?
Any input is greatly appreciated!! I am sick over losing the videos and had a little hope on Adobe Organizer until I was unable to open them. I am thinking it is due to my external hard drive not being plugged in. I thought when I transferred from the external hard drive to Adobe 13 that it would be there without the external hard drive needing to be attached but maybe I did something wrong.
Thanks again for any help!!!!

jnrmendonca
It had 4 years of photos and videos on it.
To what did your camera record those photos and videos - camera's internal memory, inserted memory card, other?
Any remote chance that the latter may still exist for you to use to download the camera files to your new external hard drive?
ATR

Webapps. How can I create a link to a page instead of showing the details-view

I want my client to define what page a webapp shall point to in list-view, instead of showing the details view, but I cant figure out how. I have tried this, but it seams that tags don't work inside links:
<a href="{tag_my_custom_link}">{tag_name}</a>
.. does any one know how to do this?

The problem is the format of your tag. If your field name in the web app is "My Custom Link" then your tag is {tag_My Custom Link} (note the spaces).
Cedric is right though, make sure the field is a textfield and not a hyperlink field in your web app. If you use BC's new "Develop" tab up top you can navigate to your web app detail layout in /Layouts/Web Apps/<yourwebapp> and find "list.html". Then, you can use the toolbox on the right (click the data tab) to insert tags without having to guess. You can choose your custom field and insert the tag.

Any suggession on Tools for Performance testing of application designed for Blackberry phones.. which can get some details on CPU usage, memory, response time?? any help on the same is much appriciated.

Hi Team,
Any suggession on Tools for Performance testing of application designed for Blackberry phones.. which can get some details on CPU usage, memory, response time?? any help on the same is much appriciated.
Thank You,
Best Regards,
neeraj

Hi Team,
Any suggession on Tools for Performance testing of application designed for Blackberry phones.. which can get some details on CPU usage, memory, response time?? any help on the same is much appriciated.
Thank You,
Best Regards,
neeraj

I have multiple calendars set up but not all are displaying in iOS 7 notification center. I just get a heading stating "there is one all-day event scheduled" in the tomorrow summary. Can't get it to show the details of the event. any ideas?

I have multiple calendars set up but not all are displaying in iOS 7 notification center. I just get a heading stating "there is one all-day event scheduled" in the tomorrow summary. Can't get it to show the details of the event. any ideas?

have you tried rebooting your computer?

Is there any standard report available to show cost prices from infor recor

Hi
Can any one tell help me is there any possiblility to make a report showing cost prices from info-records on purchasing org. level incl. prices scales?
We need a report showing the following:
Supplier no.
Supplier name
Material no.
Material name
Price
Price scales (if registred in the info-record)
Purchase organization to be showed
Selection of the report can be done with the following entries:
Supplier no.
Sourcing (material group)
Purchase organization
Please be informed that the above mentioned information and selections are just my first and best guess.
We have tried to use transaction MC$4 - however, this one is only showing the purchased quantity in the period selected.
There must be a standard transaction in SAP R/3, which can show us the prices from info-records.
Best Regards,
Sairam.

Hi!
ME1P is the best report for you although it lacked the supplier name, material name and price scales. You can ask your ABAPER to create your desired report by copying the program running ME1P and then creating a Z* report which contains all your desired fields.
Hope this helps! =)

A report which could show all contracts where I involved as collaborator,reviewer/manager

Hi,
Is there any standard reports for below? please advise me.
I am looking a report which could show all contracts where I am involved (collaborator, reviewer, Manager…).
That is if I run a report which could show all contracts where I am involved as collaborator/ reviewer/ Manager.
With Regards,
Jaheer

Hi Jaheer,
"My Master Agreements and Contract Documents" shows only the master agreements and the related contract to the documents you are a collaborator (owner, collaborator, reviewer, etc.). Does this report fulfill your requirements? If not, I think the best you can do is dupplicate the query and update it as required.
Regards,
Marc Romagosa

HT5621 I bought my iMac from someone. Everything was changed over to my name however when I try to update programs it only shows the old users apple ID and I can't update. How do I change this so I can update the applications and have everything fully und

I bought my iMac from someone. Everything was changed over to my name however when I try to update programs it only shows the old users apple ID and I can't update. How do I change this so I can update the applications and have everything fully under me?

The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You — not the previous owner — must do that. How you do it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
1. You don't own another Mac.
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. For early MBA models, you may need a USB optical drive or Remote Disc. You should have received the media from the previous owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
2. You do own another Mac.
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to create a bootable USB device and boot the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can boot from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
Once booted in Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
After partitioning, quit Disk Utility and run the OS X Installer. You will need the Apple ID and password that you used to upgrade. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
Then run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
3. Other issues
If you see a lock screen when trying to boot from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another authorized service provider to be unlocked. You may be asked for proof of ownership.
If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information.

Standard report which gives Record count of ODS, Cube and Source system.

Hi-
Is there any standard report which gives the record count of ODS, Cube and Source system?
or
If any one has ABAP program which takes care of record count pls let me know.
Thanks in advance

I don't understand. You need to check the data loads. What for do you want a list of ODS, Cubes and sources systems?
You can use messages from process chains to monitor the data loads.
You can also use an abap program inside teh process chains to save data into a table and then an abap report to see if everything went OK.
But, thinking again, you may be able to use BW statistics to get some of the information you need. Check the help for BW statistics, it might give you an idea of what you can do.
Regards,
Diego

Build a blank/other type of page which can show links to other pages

Can someone please tell me how to build a blank/other type of page which can show links to other pages? I mainly want a page to show 3 links, once someone clicks on it, then it will go to a specified page. I tried using URL, but that did not work. Any advice is greatly appreciated. Thank you very much for your help in advance.
-Grace

Do a region (probably a HTML-based one is fine), enter in the HTML for your links, and that should be it. What didn't work about this?
Your links probably should appear like this in your coding (use substitution variables):
f?p=&APP_ID.:3:&APP_SESSION.
In the above example, "&APP_ID." will resolve dynamically to the application ID that you are in, "3" is page 3 (change this to whatever page you want the link to be), and "&APP_SESSION." is the existing session number (if you don't include this, the user will receive a new session ID if the destination page is public or will be intercepted annoyingly to log in and get a new session ID which you probably don't want).
Do not include the full http path. Just start with f?p... and everything is assumed to be relative to Apex on the current environment.
Those are effectively the minimum requirements for a URL in Apex to go from one page to another in an app. You can add to that the additional URL parameters for Request value, Set items with values, clear cache, reset pagination, etc. if you need to. Check the Apex online help under "understanding URL syntax" for details on these.

Where we can find the detail infomation about the Value String of automatic

Where we can find the detail infomation about the Value String of automatic?
such as WE06,WE01 and so on.

Hai,
           Value string keys are for SAP internal usage. It is just a pointer to the transaction event key which is necessary for automatic account determination.
           Movement types are linked to transaction keys via valuation string in OMWN T-code.
           The R/3 System automatically determines the value string assigned to a specific transaction. It depends partly on entered parameters manually and partly on parameters derived internally by the system. The value string contains all posting transactions that are possible for a certain transaction. The program decides which of these posting transactions lead to G/L account postings in individual cases. You cannot define this in Customizing.
Value string WE01, for the goods receipt for a purchase order into stock, contains transactions BSX and WRX.
WE01: BSX, WRX, PRD, KDM, EIN, EKG, BSV, FRL, FRN, BSX, UMB.
WA14: BSX ,PRD, BSX, UMB
WA01: BSX, GBB, PRD, BSX, UMB
Value string RE05 contains transactions BSX and UMB.
In the standard system, value string WE01 is assigned to goods receipts (and also cancellations and return deliveries) for Standard and Subcontracting purchase order items without account assignment concerning valuated material into stock. In the case of (valuated) goods receipts for purchase order items not subject to account assignment,
post the items to a stock account using the transaction key BSX and make an offsetting entry to a GR/IR clearing account. A price difference posting (transaction key PRD) is only used if the valuated material is subject to standard price control and if the order price (or invoice price) is different from the standard price. Transaction key KDM is required in Inventory Management for purchase orders in foreign currencies because of differences in exchange rates between goods receipts and invoice receipts, unless the material can not be debited or credited because it is subject to standard price control.
The transaction keys EIN and EKG (and possibly FRE see account determination for delivery costs) are only used in company codes where purchase account management is active (as required in France and Belgium for example).
The transaction keys BSV, FRL, and FRN are only used for the Subcontracting item category.
Value string WA14 is defined for deliveries without charge (movement type 511).
The following scenarios are possible:
Delivery without charge for material subject to moving average price control → No accounting document
Delivery without charge for material subject to standard price control (and if the posting date is in the previous period standard price in the posting period = standard price in the current period) → Inventory posting (receipt at standard price) and offsetting entry to price differences account
Delivery without charge for material subject to standard price control, with posting date in the previous period and the standard price in the posting period is different to the standard price in the current period → Inventory posting (receipt at standard price) and offsetting entry to price differences account (posting in the previous period) → Stock correction posting and Revenue/expense from revaluation (posting in the current period)
In the standard system, value string WA01 is assigned to goods issues and other goods receipts. The R/3 System uses an additional influencing factor, account grouping, to differentiate further between the various movements during account determination.
Hope it will be Helpful 4 u.
Reward Point if Useful.

Is there any standard report which contain all these fields

is there any standard report which contain all these fields
1. plant
2. material no.
3. profit center
4. movement type
5.g l a/c
6.posting date
we have it in z form one of the job it does is that what all materials entries came to a single gl we can know from it
like we can know what all materials were charged to repair to p and m a/c.
can any one tell where can we find these field in any standard format in sap.
pls send some suggestions.

Hello Sanjeev,
I don't think there is an existing standard report with all the information from KE5Z plus material name.
What I would suggest to you is either:
1) Copy the standard KE5Z program (RCOPCA02) to a Z program one and insert the additional field from MAKT table (it would demand ABAP coding and some considerable effort to develop it);
2) Create a Query (SQ01 transaction) by selecting data from GLPCA (table that is used in KE5Z) and MAKT (table that contains the material name by language).
Hope it helps you.
Best Regards,
Daniel.

Standard report which can show the details of Invoice value and PO value

Similar Messages

Maybe you are looking for