Standard S_TCODE object showing Yellow trafic light
Hi All,
Recently I have noticed standard s_tcode object is showing Yellow traffic light (Not fully maintained) in one of the role in ECC6 system. I have tried to maintain by clicking on change button which usually doing with other objects and got succeeded to do modifications.
I have downloaded that role and uploaded in to another ECC6 system and observed that s_tocde is in green color and not allowed me to modify it as usual.
As per my knowledge standard s_tocde object is not modifiable but we can modify manually inserted s_tcode object.
Please advice.
Regards,
Sri Vandan.
Hi,
What happens if you delete the role in your original system and re-upload and generate?
I have tried that one also but getting same problem.
propably the SU24 entries have been changed (for field S_TCODE) since the last mergeing of authorization data....
Bernhard, can you please elaborate on this.
Regards,
Sri Vandan.
Similar Messages
-
Statndard S_TCODE object in unmaintained (yellow) status
Hi Experts,
I came across a role in which standard S_TCODE object is in unmaintained(yellow) status.
Is there any limit to number of Tcodes which can be added under S_TCODE object?
Please help me out to find the reaon.
Thanks,
MohitHi Julius,
Its new to me too Thanks for sharing the notes. I didn't guess and hence said as per my knowledge Limiting the guess to my knowledge.
Thanks agian!!
Rgds,
Raghu -
My Mac book pro black out just so, and the charger show a blinking light after I pressed the power button (green to yellow)
2. Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own". -
Hi all,
My Philips tv lost Connection to Apple TV 1. Generation After months of no problems: tv says no Videosignal found. Appletv Shows a yellow Blinksignal light on the Front??
Can anybody help?
Tranks
RobWelcome to the Apple Community.
Restart the Apple TV by removing ALL the cables for 30 seconds.
If this doesn't help then I suspect your Apple TV has failed. -
Hi Experts,
When we are searcing for "Y" Tcode in Menu Tab in "XXX" Role in PFCG,It was not there in menu Tab.
But it was there in S_TCODE Object.S_TCODE Object is maintained one.It was not added manually.
Ex:When I am searcing for SM59 in menu tab,it was not showing any output.But when I given RFC(in find) it displaying all tcodes with RFC name(including SM59 which was not shown when I searched as SM59 ).But it is showing as Service in the place of tcode.
But SM59 was there in S_TCODE Object & it was showing in SUIM & SE16 dump.
Kindly help to solve the above issue.
Regards,
KarthikaI've just noticed you mentioned 'Service' below in your original posting?
"But it is showing as Service in the place of tcode"
(Haven't worked out how to do a quote on here yet so I apologise for the crude entry
Is this on the menu tab that you are seeing the transaction called service please? If so then this would have been added via the authorisation default button instead of the insert transaction button. This can be used to 'hide' a transaction from view of the user (a bit flakey but a final resort sometimes!)
The transaction will have a hand holding a green card icon next to it instead of the usual three-D box.
Table AGR_BUFFI holds this info and not AGR_TCODES or AGR_1251 - are you using SUIM or SE16(N) to search?
Standard SUIM will return the 'SM59' fine but SE16(N) won't.
See you have solved it but I'm not clear what happened yet so I'll keep digging 0;0
Edited by: David Berry on Sep 20, 2010 7:49 PM -
Hi Masters,
i have tried my best to Impliment the TRAFIC LIGHTS in my alv report but i could not succeed.
can i have some input as to how we impliment the TRAFIC LIGHTS CODE in alv report.
your valuble info is highly appriciated.
thank you,
pasala.the previous post is the sample code if you want to use ALV via cl_salv_table, but if you want to build ALV using function module REUSE_ALV_GRID_DISPLAY, please try following sample code. It works in my computer. Hope it helps.
types: begin of gs_outtab.
types: lights type char1,
color type i,
tabcol type lvc_t_scol,
id type char25, " Already exist in ICON, Flat Structure
name type icon-name,
symbol type icon-id,
end of gs_outtab.
data: gt_outtab type standard table of gs_outtab.
data: gr_grid type ref to cl_gui_alv_grid.
data: gr_container type ref to cl_gui_custom_container,
gs_layout type lvc_s_layo,
gt_fieldcat type lvc_t_fcat.
data: ls_vari type disvariant.
data: g_okcode type syucomm.
data: gt_exc type table of ALV_S_QINF.
data: text type string.
selection-screen begin of block gen with frame.
parameters:
p_amount type i default 20.
selection-screen end of block gen.
selection-screen begin of block dsp with frame.
parameters:
p_full radiobutton group dsp,
p_grid radiobutton group dsp.
selection-screen end of block dsp.
START-OF-SELECTION.
END-OF-SELECTION.
perform select_data.
IF p_full = 'X'.
perform display_fullscreen.
ELSE.
perform display_grid.
ENDIF.
STEP 1: load data *******************************************
form select_data.
select * from icon into corresponding fields of table gt_outtab
up to p_amount rows.
endform.
STEP2: build full screen **************************************
form display_fullscreen .
data: ls_layout type slis_layout_alv,
lt_fcat type slis_t_fieldcat_alv,
ls_fcat type slis_fieldcat_alv.
ls_layout-lights_tabname = '1'.
ls_layout-lights_fieldname = 'LIGHTS'.
ls_layout-coltab_fieldname = 'TABCOL'.
clear ls_fcat.
ls_fcat-fieldname = 'LIGHTS'.
ls_fcat-inttype = 'C'.
ls_fcat-seltext_l = ls_fcat-seltext_m = ls_fcat-seltext_s = 'Lights'.
append ls_fcat to lt_fcat.
clear ls_fcat.
ls_fcat-fieldname = 'COLOR'.
ls_fcat-inttype = 'I'.
ls_fcat-seltext_l = ls_fcat-seltext_m = ls_fcat-seltext_s = 'Color'.
append ls_fcat to lt_fcat.
clear ls_fcat.
ls_fcat-fieldname = 'ID'.
ls_fcat-inttype = 'C'.
ls_fcat-seltext_l = ls_fcat-seltext_m = ls_fcat-seltext_s = 'Icon'.
ls_fcat-icon = abap_true.
append ls_fcat to lt_fcat.
clear ls_fcat.
ls_fcat-fieldname = 'SYMBOL'.
ls_fcat-inttype = 'C'.
ls_fcat-seltext_l = ls_fcat-seltext_m = ls_fcat-seltext_s = 'Symbol'.
ls_fcat-symbol = abap_true.
append ls_fcat to lt_fcat.
clear ls_fcat.
ls_fcat-fieldname = 'NAME'.
ls_fcat-tech = abap_true.
append ls_fcat to lt_fcat.
perform select_data.
perform set_tooltips.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
IS_LAYOUT = ls_layout
IT_FIELDCAT = lt_fcat
IT_EXCEPT_QINFO = gt_exc
TABLES
T_OUTTAB = gt_outtab
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
ASSERT sy-subrc = 0.
endform.
STEP3: display grid ******************************************
form display_grid.
call screen 100.
endform.
STEP4: PBO ***************************************************
module d0100_pbo output.
perform d0100_pbo.
endmodule.
STEP5: PAI ***************************************************
module d0100_pai input.
perform d0100_pai.
endmodule.
STEP6: PBO form ***********************************************
form d0100_pbo .
set pf-status 'D0100'.
if gr_container is not bound.
create object gr_container
exporting
container_name = 'CONTAINER'.
create object gr_grid
exporting i_parent = gr_container.
data: ls_layout type lvc_s_layo,
lt_fcat type lvc_t_fcat,
ls_fcat type lvc_s_fcat.
ls_layout-excp_fname = 'LIGHTS'.
ls_layout-ctab_fname = 'TABCOL'.
clear ls_fcat.
ls_fcat-fieldname = 'LIGHTS'.
ls_fcat-inttype = 'C'.
ls_fcat-scrtext_l = ls_fcat-scrtext_m = ls_fcat-scrtext_s = 'Lights'.
append ls_fcat to lt_fcat.
clear ls_fcat.
ls_fcat-fieldname = 'COLOR'.
ls_fcat-inttype = 'I'.
ls_fcat-scrtext_l = ls_fcat-scrtext_m = ls_fcat-scrtext_s = 'Color'.
append ls_fcat to lt_fcat.
clear ls_fcat.
ls_fcat-fieldname = 'ID'.
ls_fcat-inttype = 'C'.
ls_fcat-scrtext_l = ls_fcat-scrtext_m = ls_fcat-scrtext_s = 'Icon'.
ls_fcat-icon = abap_true.
append ls_fcat to lt_fcat.
clear ls_fcat.
ls_fcat-fieldname = 'SYMBOL'.
ls_fcat-inttype = 'C'.
ls_fcat-scrtext_l = ls_fcat-scrtext_m = ls_fcat-scrtext_s = 'Symbol'.
ls_fcat-symbol = abap_true.
append ls_fcat to lt_fcat.
clear ls_fcat.
ls_fcat-fieldname = 'NAME'.
ls_fcat-tech = abap_true.
append ls_fcat to lt_fcat.
perform select_data.
perform set_tooltips.
data: lt_tooltips type lvc_t_qinf,
lt_toolb type ui_functions,
ls_toolb type UI_FUNC.
ls_toolb = CL_GUI_ALV_GRID=>mc_fc_call_crbatch.
append ls_toolb to lt_toolb.
lt_tooltips = gt_exc.
call method gr_grid->set_table_for_first_display
exporting is_layout = ls_layout
it_except_qinfo = lt_tooltips
it_toolbar_excluding = lt_toolb
changing
it_fieldcatalog = lt_fcat
it_outtab = gt_outtab.
endif.
endform.
STEP7: PAI form ******************************************************
form d0100_pai .
case g_okcode.
when 'BACK' or 'EXIT' or 'CANC'.
set screen 0.
leave screen.
endcase.
endform.
STEP8: Set Tooltip *************************************************
FORM set_tooltips .
field-symbols: <outtab> type gs_outtab.
data: tooltips type ref to cl_salv_tooltips,
settings type ref to cl_salv_functional_settings,
ls_styl type lvc_s_styl,
value type char128,
text type char40,
ls_symbol type icon,
lt_symbol type standard table of icon,
ls_exc type ALV_S_QINF,
tabix type sy-tabix,
col type lvc_s_scol.
loop at gt_outtab assigning <outtab>.
tabix = sy-tabix.
read table lt_symbol index sy-tabix into ls_symbol.
<outtab>-symbol = ls_symbol-id.
value = <outtab>-id(3).
text = <outtab>-name.
concatenate value '\Q' text '@' into value.
<outtab>-id = value.
value = ls_symbol-id.
text = ls_symbol-name.
ls_exc-type = cl_salv_tooltip=>c_type_symbol.
ls_exc-value = value.
ls_exc-text = text.
append ls_exc to gt_exc.
<outtab>-color = tabix mod 7 + 1.
<outtab>-lights = tabix mod 3 + 1.
col-fname = 'COLOR'.
col-color-col = tabix mod 7 + 1.
if tabix ge 7.
col-color-inv = 1.
endif.
if tabix ge 14.
col-color-int = 1.
endif.
append col to <outtab>-tabcol.
endloop.
ENDFORM. -
Hi Gurus,
I have seen trafic light in MD07
I didn't get, what is the porpose of that trafic ligh in SAP.
Can any body tell me why SAP has given this option of trafic light in MD07
Thanks & Regards,
NileshDear,
Materials are indicated with red, yellow, and green traffic lights in the material tree and in the material lists for the MRP list and for the stock/requirements list.
The traffic light values (red, yellow, green) indicate how urgently materials need to be processed. Red traffic lights immediately indicate that the appropriate materials are critical and urgently need to be processed.
The traffic light display is controlled by ranges of coverage and exception groups. As standard, a red traffic light is displayed when the days' supply, receipt days' supply 1, or receipt days' supply 2 are less than or equal to zero, or when an exception message for group 8 is displayed. Example: You want all materials, whose dates lie in the past, to be indicated by a red traffic light.
Please refer the link,
[Trafic light |http://help.sap.com/saphelp_46c/helpdata/en/2c/471d0f0e0311d3b4990004ac160649/frameset.htm]
Hope clear to oyu.
Regards,
R.Brahmankar -
How to create Object Links For non standard SAP Objects?
Hi all,
I need to create an object link in cvo1n for a non standard SAP object (inspection characteristics) . we have two ways to do this
1. Create a screen for the rquirement by taking the standard screens as reference.
2. Implement badi document_obj.
I need a step by step process to perform both the steps. Sample codes will be helpful.
One more thing is that i need a link in the standard screens of inspection characteristics also. How to get a two way link both in cv01n and in the standard inspection char screen.hi
Customizing for the Do cument Management , you must maintain the key fields for the SAP objects that you want to link to document info records, by choosing Control Data ® Maintain key fields.
Process
Program two screens for the following module pools for the SAP object that is to be linked additionally:
u2013 SAPLCV00
u2013 SAPLCVIN
The process logic must be according to that of screen 0204 in program SAPLCV00 and must not be changed.
Create the function module OBJECT_CHECK_XXXX (XXXX = name of the SAP object).
If this object can be classified, this function module already exists in the standard system. Otherwise, copy the existing function module OBJECT_CHECK_EQUI (linking of equipment) and change it to suit the new object.
also you can attach the document to PRT also. but it will not show you in dms. This type of attachment is only from otherside.
thanks
nitin
award point if useful -
Error in Standard Business Object BUS2012
Hi Friends..
Iam using standard business object BUS2012 for purchase order creation workflow.
while creating PO the workflow need to be triggered.
But i got an error message in BUS2012 thatswhy the workflow was not triggered while creating PO.
i got the following error
"Basic IDOC type PORDCR02 is unknown"because of this error the workflow was not getting triggered..
so how can i solve this problem..
Thanks
GowrishankarHi Karri..
I checked already,the erroe occured in business object only..
because if i run the business object in local system it executes perfectly..(if iam using BUS2012 in local system it will trigger the workflow when iam creating PO)
but in client system it wont execute...
it shows the error..(if iam using BUS2012 in client system there is no workflow got triggered when iam creating PO)
so if you know how to solve problem..
let me know..
Thanks
Gowrishankar
Edited by: gowrishankar p on Dec 27, 2007 10:35 AM -
Partial activation in standard SAP object
Hi all,
I had to change a standard SAP object. However, when i was asked about the language, i accidentally clicked "change original language". I made the changes and activated.
However, it shows me partially active. Please let me know if it is ok, or if there is some way out.
Thanks and Regards
Vijayhi vijay,
Welcome to SDN.
Partial Activation Comes Up with the warnings. In Most of the cases the Table will not be converted according to the requested mode. Plz Read the warnings that you are getting while Activation and Try to solve those.
Mostly It will Work.
Hope this will Help.
Reward If useful.
Regards
Sumit Agarwal -
Regarding displaying Trafic light on one column of ALV
Hi
I want to display trafic light(red or yellow) on the first column of the ALV report.Is it possible by any alv field catalog field ?use this demo code - in this code the form fill_itab is related to ur requirement,see loop at itab ,in tht form..u wil find the way to use traffic lights..
*& Report ZGILL_ALV *
REPORT ZGILL_ALV message-id rp .
type-pools slis.
tables: zgill_main,zgill_details.
data z_fieldcat type slis_t_fieldcat_alv.
data begin of itab occurs 0.
DATA ICON TYPE ICON-ID.
include structure zgill_main.
data salary like zgill_details-salary.
data end of itab.
*data itab1 like table of itab with header line.
data : WA_SORT TYPE SLIS_SORTINFO_ALV,
IT_SORT TYPE SLIS_T_SORTINFO_ALV,
WA_FIELDCAT TYPE SLIS_FIELDCAT_ALV,
IT_FIELDTAB TYPE SLIS_T_FIELDCAT_ALV,
WA_LAYOUT TYPE SLIS_LAYOUT_ALV.
PARAMETERS: p_list radiobutton group A1,
P_GRID RADIOBUTTON GROUP A1.
SELECT-OPTIONS: S_PERNR FOR ZGILL_MAIN-PERNR.
start-of-selection.
perform fill_itab.
perform sort_list.
**************Start of scenario without container******************************************
*********Method 1***********
perform fill_fieldcat. " Manuallly Preparing Fiedl Catalog
*********Method 2***********
*perform fill_fieldcat1 changing z_fieldcat. "Preparing field catalog with merge function
perform display_alv.
*****************end of scenario without container*****************************************
*& Form fill_itab
text
--> p1 text
<-- p2 text
form fill_itab .
*select * from zgill_main up to 20 rows INTO CORRESPONDING FIELDS OF TABLE itab.
*ITAB1[] = ITAB[].
select apernr aname aorg adob b~salary INTO CORRESPONDING FIELDS OF TABLE itab
from zgill_main as a join zgill_details as b on apernr = bpernr
WHERE A~PERNR IN S_PERNR.
LOOP AT ITAB.
IF ITAB-PERNR < 1111.
ITAB-ICON = '@08@'.
ELSEIF ITAB-PERNR > 1111 AND ITAB-PERNR < 11111111.
ITAB-ICON = '@09@'.
ELSEIF ITAB-PERNR GE 11111111.
ITAB-ICON = '@0A@'.
ENDIF.
MODIFY ITAB INDEX SY-TABIX.
ENDLOOP.
endform. " fill_itab
*& Form display_alv
text
--> p1 text
<-- p2 text
form display_alv .
data repid like sy-repid.
REPID = SY-REPID.
WA_LAYOUT-ZEBRA = 'X'.
WA_LAYOUT-WINDOW_TITLEBAR = 'GRID DISPLAY'.
WA_LAYOUT-SUBTOTALS_TEXT = 'SUBTOTAL'.
WA_LAYOUT-TOTALS_TEXT = 'TOTAL'.
IF P_GRID = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = repid
IT_FIELDCAT = IT_FIELDTAB
IT_SORT = IT_SORT
IS_LAYOUT = WA_LAYOUT
TABLES
t_outtab = itab[]
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
IF sy-subrc <> 0.
message e016 with 'Error in Display'.
ENDIF.
ELSEIF P_LIST = 'X'.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = repid
IT_FIELDCAT = IT_FIELDTAB
IT_SORT = IT_SORT
IS_LAYOUT = WA_LAYOUT
TABLES
t_outtab = itab[]
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
IF sy-subrc <> 0.
message e016 with 'Error in Display'.
ENDIF.
ENDIF.
endform. " display_alv
*& Form fill_fieldcat1
text
--> p1 text
<-- p2 text
form fill_fieldcat1 changing d_fcat type slis_t_fieldcat_alv.
data repid like sy-repid.
data d_fcat1 type slis_t_fieldcat_alv with header line.
REPID = SY-REPID.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
I_PROGRAM_NAME = repid
I_INTERNAL_TABNAME = 'ITAB'
I_STRUCTURE_NAME = 'ZGILL_MAIN'
I_CLIENT_NEVER_DISPLAY = 'X'
I_INCLNAME =
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE =
CHANGING
ct_fieldcat = d_fcat[]
EXCEPTIONS
INCONSISTENT_INTERFACE = 1
PROGRAM_ERROR = 2
OTHERS = 3.
IF sy-subrc <> 0.
message e016 with 'Error in preparing fiedl catalog'.
ENDIF.
loop at d_fcat into d_fcat1.
case d_fcat1-fieldname.
when 'NAME'.
d_fcat1-reptext_ddic = 'Emp Name'.
MODIFY D_FCAT FROM D_FCAT1.
WHEN 'PERNR'.
d_fcat1-reptext_ddic = 'Emp Num'.
MODIFY D_FCAT FROM D_FCAT1.
WHEN 'ORG'.
d_fcat1-reptext_ddic = 'Org Unit'.
MODIFY D_FCAT FROM D_FCAT1.
endcase.
clear d_fcat1.
endloop.
endform. " fill_fieldcat1
*& Form sort_list
text
--> p1 text
<-- p2 text
form sort_list .
CLEAR WA_SORT.
WA_SORT-FIELDNAME = 'DOB'.
WA_SORT-SPOS = '1'.
WA_SORT-UP = 'X'.
WA_SORT-SUBTOT = 'X'.
APPEND WA_SORT TO IT_SORT.
CLEAR WA_SORT.
WA_SORT-FIELDNAME = 'NAME'.
WA_SORT-SPOS = '1'.
WA_SORT-UP = 'X'.
APPEND WA_SORT TO IT_SORT.
CLEAR WA_SORT.
endform. " sort_list
*& Form fill_fieldcat
text
--> p1 text
<-- p2 text
form fill_fieldcat .
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'ITAB'.
WA_FIELDCAT-FIELDNAME = 'ICON'.
WA_FIELDCAT-SELTEXT_L = 'TRAFFIC'.
WA_FIELDCAT-ICON = 'X'.
WA_FIELDCAT-ddictxt = 'l'.
WA_FIELDCAT-COL_POS = 1.
WA_FIELDCAT-OUTPUTLEN = 10.
APPEND WA_FIELDCAT TO IT_FIELDTAB.
CLEAR WA_FIELDCAT .
WA_FIELDCAT-TABNAME = 'ITAB'.
WA_FIELDCAT-FIELDNAME = 'PERNR'.
WA_FIELDCAT-SELTEXT_L = 'EMP NUMBER'.
WA_FIELDCAT-ddictxt = 'l'.
WA_FIELDCAT-COL_POS = 2.
WA_FIELDCAT-OUTPUTLEN = 10.
APPEND WA_FIELDCAT TO IT_FIELDTAB.
CLEAR WA_FIELDCAT .
when 'maktx'.
WA_FIELDCAT-TABNAME = 'ITAB'.
WA_FIELDCAT-FIELDNAME = 'NAME'.
WA_FIELDCAT-SELTEXT_L = 'EMP NAME'.
WA_FIELDCAT-ddictxt = 'l'.
WA_FIELDCAT-COL_POS = 3.
WA_FIELDCAT-OUTPUTLEN = 15.
APPEND WA_FIELDCAT TO IT_FIELDTAB.
CLEAR WA_FIELDCAT .
WA_FIELDCAT-TABNAME = 'ITAB'.
WA_FIELDCAT-FIELDNAME = 'ORG'.
WA_FIELDCAT-SELTEXT_L = 'ORG UNIT'.
WA_FIELDCAT-COL_POS = 4.
WA_FIELDCAT-OUTPUTLEN = 10.
APPEND WA_FIELDCAT TO IT_FIELDTAB.
CLEAR WA_FIELDCAT .
WA_FIELDCAT-TABNAME = 'ITAB'.
WA_FIELDCAT-FIELDNAME = 'DOB'.
WA_FIELDCAT-SELTEXT_L = 'BIRTH DATE'.
WA_FIELDCAT-COL_POS = 5.
WA_FIELDCAT-OUTPUTLEN = 12.
APPEND WA_FIELDCAT TO IT_FIELDTAB.
CLEAR WA_FIELDCAT .
WA_FIELDCAT-TABNAME = 'ITAB'.
WA_FIELDCAT-FIELDNAME = 'SALARY'.
WA_FIELDCAT-SELTEXT_L = 'SALARY'.
WA_FIELDCAT-COL_POS = 6.
WA_FIELDCAT-OUTPUTLEN = 25.
WA_FIELDCAT-do_sum = 'X'.
APPEND WA_FIELDCAT TO IT_FIELDTAB.
endform. " fill_fieldcat -
What does the yellow flashing light on my time capsule mean? I have a new hard drive and want to download from my time capsule. I have an Ethernet cable running directly from my capsule to my laptop but nothing seems to be happening. The screen is prompting for a backup volume but the option box is blank.
A yellow light means that a Time Capsule isn't "happy" for a number of possible reasons. AirPort Utility should be able to show the reason, but if you only have one Mac it may be difficult to learn the reason.
-
i am trying to set up an airdisk that is connected to my parents airport extreme,
though next to my iCloud account details i get a yellow status light and can't get a hold on to the airdisk when i'm being connected to a different internet connection..what should i do?
sharing is enabled and i entered the right account details.
the disk shows up connected to my parents network, but i want to access it from my place as wellEncryption wouldn't matter except for Wifi.
While 10.2 might help, there's not much you can do on the Internet these days with less than 10.4.11
Tiger Requirements...
To use Mac OS X 10.4 Tiger, your Macintosh needs:
* A PowerPC G3, G4, or G5 processor
* Built-in FireWire
* At least 256 MB of RAM (I recommend 1GB minimum)
* DVD drive (DVD-ROM), Combo (CD-RW/DVD-ROM) or SuperDrive (DVD-R) for installation
* At least 3 GB of free disk space; 4 GB if you install the XCode 2 Developer Tools (I recommend 20GB minimum)
http://support.apple.com/kb/HT1514
http://www.ebay.com/sch/i.html?_nkw=mac+os+x+tiger+retail+10.4
See Tom's, (Texas Mac Man), great info on where/how to find/get Tiger...
https://discussions.apple.com/message/15305521#15305521
Or Ali Brown's great info on where/how to find/get Tiger...
http://discussions.apple.com/thread.jspa?messageID=10381710#10381710
As far as Memory, that's sort of easy, find your eMac here...
http://eshop.macsales.com/MyOWC/Models.cfm?Family=emac&sType=Memory
As far as Hard Drive, it's not easy to replace the Internal drive, I'd maybe suggest an external Firewire drive to boot from...
http://eshop.macsales.com/item/Other%20World%20Computing/MAU4S7500G16/ -
2nd gen green-yellow flashing lights with content on iPod
so I looked up the definition of the alternating green-yellow flashing lights and it apparently means that there's no content on the iPod.
But when connected to Mac iTunes it shows that there actually is content on it. Hmmm. I can even play that content *from* the iPod through iTunes interface and hear it through the powerbook speakers.
I ran the iPod reset utility, reset the firmware in iTunes and reloaded the podcasts. Still the same thing.
Seems to sync fine. Don't know what's going on with this.Make sure the mode switch is set to "play-in-order" and NOT "shuffle".
Flashing green-yellow means there's no PLAYABLE content on the shuffle.
Message was edited by: 0Ari0 -
Hi Team,
Showing Yellow icons after every 15 to 20 Min and internet stop working.when we enable- disbale the network connection then will internet start working fine.Some time network connection is disable but when we renable that connection it will stuck on enabling
and will not renable till i am not restart that machine. I have 350 Machine in network but facing this issue in 25 machines. Kindly help me on this issue .
Regards
Sahil bhatejaHi，
So switch a LAN card fix this issue...seems a compatibility issue or maybe some packs or programs you installed recently cause this issue.
Have you manually check the network adapter driver from the PC's manufacture website? sometimes, it will be a time delay before Microsoft push out the driver update.
Check if issue exists in safemode with network, this mode will launch Windows with limited sets of files and drivers.
if you have a restore point, restore the pc to a previous point at which the pc is functioning fine.
Yolanda Zhu
TechNet Community Support
Maybe you are looking for
-
My iPod Touch battery is not working. I requested a repair through the Apple Support. On the final page, when I clicked the button that puts the info through with your credit card number, the resulting page gave an error (I wish I'd have saved it!).
-
Problem storing Russian Characters in Oracle 10g
We are facing an issue in one of our sites which is in Russian Language. Whenever data is submitted with Russian Characters it saves it as Question mark(upside down) in the database. Database is not supporting these characters.The character encoding
-
How do you Backup Canon VIXIA HF10 files for FCP?
Hi, I just bought a Canon VIXIA HF10, wonderful!! I'm trying to import the captured/recorded files into FCP..i found that's a problem.. When i drag and drop all the files and folder on my desktop and when i deleted 1 of the file in the backup folder.
-
Cannot tab out of contact first name field in CSXSRISR
Hi, For some specific customers, we have this strange issue. If a value from LOV is chosen for the contact first name, last name or email, user cannot get out of the field. There is no error message. Unless the contact field is cleared, the user cann
-
Mail remaining in the Draft-Folder after sending
When I write a mail that takes more than 10 minutes, it is automatically saved in the Draft-Folder. Then, when it has been sent, it remains in the Draft-Folder. If I relaunch the Mail-program, this same mail is twice present in the Draft-Folder (!!!)