Standard SAP EXIT on Text Variables

Hello Experts,
I am working on Customer Aging Analysis. first of all I want to use standard SAP Queries and want to have a look on standard SAP EXIT created on variables.i have opened the query no 0FIAR_C03_Q0005. here it shows me one text variable 0P_KEYD2. now i want to see that SAP EXIT created on the variable of Posting Date.
I went to SE37. i entered the Function Module EXIT_SAPLRRS0_001. but i didn't get standard SAP EXIT given by SAP.
Can anyone tell me from where i can activate or Get the standard SAP EXIT ?
Regards,
Komik Shah

Hi Mansi,
Thanks for your reply.
now if i want to add that SAP EXIT in EXIT_SAPLRRS0_001, then can i add it ? or do i have to directly use RSVAREXIT_0P_KEYD2 ??
All standard SAP EXIT will work the same way you  mentioned ?? means goto SE37 --> type Variable Name --> get that exit.
Regards,
Komik Shah

Similar Messages

  • Find SAP Exit code for Variable '0CMONTH '

    I am trying to fnd the SAP exit code for variable 0CMONTH so I can create a customer copy and make the variable 'ready for input'. Any ideas where I can find the code or a simple way to effectviely copy the delivered variable.
    I have tried looking in SE37 and then RSVAREXIT* but cannot seem to find the specific code I need.
    Thanks
    Steve

    Hi,
    Search the technical name for the variable in metadata repository and try to find the program where it is declared.  Then i hope u can go the code where it is written.
    Cheers.
    Ranga.

  • SAP exit  -- user entry variable

    Hello,
    In my report i need two columns: one is for displaying the value of the current period and the other one is for displaying the cumulated value up to the current period. The info object is 0FISCPER.
    1. The current period should be entered via user entry and based on this, an exit variable should pick up the year's cumulated value. Which variables could I use to fulfill these requirements?
    2. Furthermore i have looked in SE37 to find the code of SAP Exit variable "0FYTCFP". However, the FM for the variable doesn't seem to exist. Why? The variable however exists in table RSZGLOBV. How do I find the code?
    Thanks in advance,
    F C

    If you are gonna use fiscper as a variable parameter, your requirement would need a customer exit. 
    If i get it right, the first would column should be derived from the user entry which wont be possible with the suggested SAP exit as that would bring the current fiscalyear/period (based on sys date) not giving the user the option to enter the fiscalyear/period. And the second column should be a YTD for that particular year the user has entered as a input parameter. the suggested SAP exit will again be calculating based on ur system date not on the user input.
    the only way you can overcome this is if you have the flexibility to use fiscalyear and posting period seperately. if you can do that, you can avoid the customer exit. the procedure would be -
    You can create ur own variable of type user entry on fiscalyear and posting period.
    the first column would have ur KF further restricted by fiscalyear and posting period restricted by the variables you created ... so in the 1st column you would get the value for that period.
    in the second column, the selections would be same (KF further restricted by fiscalyear and posting period ) but while restrict posting period make it a value range - and in the range pick period 1 - the variable u created, that would give you the YTD from period 1 to the user entered period.

  • Give me details about  customer exit, sap exit using characterstics variabl

    give me details about  customer exit, sap exit using characterstics variable

    Hi,
    Customer Exit:
    http://help.sap.com/saphelp_nw04/helpdata/en/f1/0a56f5e09411d2acb90000e829fbfe/content.htm
    SAP Exit:
    http://help.sap.com/saphelp_nw04/helpdata/en/f1/0a56f5e09411d2acb90000e829fbfe/frameset.htm
    Characteristic Variables:
    http://help.sap.com/saphelp_nw04/helpdata/en/5c/8db07d555411d189660000e829fbbd/frameset.htm
    SAP and Customer Exit:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f1a7e790-0201-0010-0a8d-f08a4662562d
    Some Imp Docs:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/650ee690-0201-0010-4bb7-83c3e2a74039
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/009819ab-c96e-2910-bbb2-c85f7bdec04a
    Assign points if these are helpful.
    Rgs,
    I.R.K

  • How to find list of standard sap exits are there in BW

    HI ALL,
    Please tell me how can i find list of sap exits in BW
    Thanks in Advance.

    Hi,
    Refer this link, it will give you entire list + how to get the list:
    http://www.easymarketplace.de/userexit.php
    Hope this helps.
    Thanks,
    Rahul

  • How to look at sap exit  for bex variable

    hi gurus
    how can i read a sapexit for a standard variable created by sap. i need to replicate that same code and modify it and make my own user exit for a custom variable.
    thanks

    hi Adnan,
    sap variable exit is process with function module RSVAREXIT[variable name],
    e.g you want to see code for 0date, run SE37, RSVAREXIT0DATE and display.
    hope this helps.

  • How to view output of SAP Exit variables

    Hi All,
    I want to view the data of standard SAP Exit variables. For example, for displaying the current date, SAP has provided some variables to use in the report. Can you please guide me where to get all the variables and how to see the output of these variables.
    Thanks.

    Hi,
    1) In Business Content all the variable will available.
    2) If you will proper standard variable in your report, there is no need to check still you need to check then use RSRT tcode, give the report name and execute with EXECUTE+DEBUG option.
    3) for example current calender day data need in report then standard exit variable to you character sticks or depend upon same logic directly use in your key figure, in this case for that key figure value always current day date.
    4) it may helps you and elaborate your idea and explore your issue for further discussion.
    Thanks & Regards,
    Srinu.Raport

  • Q: variable 0CWD / SAP exit program code

    hi guys, actually i want to create a variable like 'last work day'. my idea is to look up in the SAP-Exit coding how 0CWD (current workday) is being processed. can someone please give me directions where i should start exploring? programs sth. like the custom user exit, or some special function module? have already spent some time searching. 
    any contribution is highly appreciated, THX! Harald

    All standard SAP exit variable, have their respective function modules…
    For example consider standard variable exit 0P_COAPP.
    Then in se37 search for RSVAREXIT_* (* = 0P_COAPP).
    Similarly we can search for other relevant standard variables with exit. From the description in the search, you can look for the exit that you want.
    Hope this helps.
    Awarding points on SDN is a way of saying thanks!
    Prakash

  • 0P_CURRENCY_COMP_CDE Sap Exit Variable BI

    Hi!
    Does anyone have any idee where I can find the SAP exit behind the variable 0P_CURRENCY_COMP_CDE?
    I would like to write a Exit of my own, that limits the number of currencies in a variable, which is used for currency conversion in a BI-Query.
    If anybody has done something similar, please give me some hints.
    Thank you,
    DAN

    My Code is as below ,
              case i_vnam.
                  WHEN 'ZYTD_PERIOD'.
                  IF I_STEP = 2.
                  LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE WHERE VNAM = '0P_FPER'.
                  CLEAR L_S_RANGE.
                  L_S_RANGE-LOW0(4) = LOC_VAR_RANGE-LOW0(4).
                  L_S_RANGE-LOW+4(3) = '001'.
                  L_S_RANGE-HIGH = LOC_VAR_RANGE-LOW.
                  L_S_RANGE-SIGN = 'I'.
                  L_S_RANGE-OPT = 'BT'.
                  APPEND L_S_RANGE TO E_T_RANGE.
                  EXIT.
                  ENDLOOP.
                  ENDIF.
                  ENDCASE.

  • Processing type as SAP Exit with Variable 0F_ADAY

    Hi Experts,
    We are using the formula variable in our report as caluculated key figure.  I have edited the CKF and drill down the formula node to check the processing type of it and found as SAP Exit and the variable name is 0F_ADAY.  How can i navigate to get in to the SAP Exit code.  Any help will be appreciated.
    Thanks and Regards,
    Venkat

    Hi Venkat,
       Go to the function module "RSVAREXIT" (T.Code - SE37) and check for you variable (0F_DAY)there. From there u can check the code corresponding to that variable;
    Regards
    Prasad;

  • SAP Exit for Current Posting Period

    H All,
       I am executing a query and it should always take the Current Fiscal Year & Current period into consideration. I don't see any Standard SAP exit which is provided for this. There is an SAP exit for Fiscal year/Period but I need both of them seperately.   Can anyone please provide a sample code for "Current posting period".
    Points will be assigned!
    Thanks a lot!

    Hi Sia
    Here is some cmod code that might help:
    These should be run in i-step = 1
    DATA: l_period        TYPE t009b-poper,
              l_txt4(4)      TYPE c.
    *Variable ZCCCFYEAR that defauts to current Fiscal Year
            WHEN 'ZCCCFYEAR'.
              l_txt4 = syst-datum(4).
              l_period = syst-datum+4(2).
    *Handles FiscVarnt, period 6 is end of year so period 7 is new year
              IF l_period > '06'.
                l_txt4 = l_txt4 + 1.
              ENDIF.
              l_s_range-low = l_txt4 .
              l_s_range-high = ''.
              l_s_range-sign = 'I'.
              l_s_range-opt = 'EQ'.
              APPEND l_s_range TO e_t_range.
    *Variable ZCCPPER that defauts to current Posting Period
    Code adds 6 to current year period to be inline with Fiscal Year Variant (ie.per1 = july(7)),
            WHEN 'ZCCPPER'.
              l_period = syst-datum+4(2) + 6.
              IF l_period > 12.
                l_period = l_period - 12.
              ENDIF.
              l_s_range-low = l_period.
              l_s_range-high = ''.
              l_s_range-sign = 'I'.
              l_s_range-opt = 'EQ'.
              APPEND l_s_range TO e_t_range.
    Hope this helps
    Josh

  • Standard sap BACK, CANCEL icons affected by custom status - why?

    Hello SDN Community,
    I was trying to clean up some items in the Function List display of my custom status and I had deleted a couple of items that I had created incorrectly.
    After that, I ran my transaction and clicked the standard sap EXIT icon.  It returned me to the initial SAP screen.   However, I noticed that the BACK and CANCEL icons were greyed out.  It was working fine 5 minutes before this.
    Would anyone know what I might have done to cause this to happen?  Things to look for, places to check?
    Thank you,
    Dean Atteberry.

    Rich,
    Both buttons (BACK, CANCEL) have function codes of the same name.
    The EXIT button has function code of "EXIT".
    All three are active as long as my transaction is running and they function fine from any screen (about 6 screens).
    However, when I hit any one of the three (BACK, EXIT, CANCEL), it returns me to the SAP Easy Access screen.  On that screen BACK and CANCEL are greyed out.  EXIT is active.
    When I hit back from my first screen, my program does "LEAVE PROGRAM".   So I turned on debugger and put SY-PFKEY in the variable display and hit BACK.  It went directly to Easy Access, so I didn't see anything.  However, when I typed in SE38 in command line, it was still in debugging mode and "SESSION" showed up in debug variable display for SY-PFKEY.
    Program for easy access is SAPLSMTR_NAVIGATION and when I looked in SE41 for status SESSION, found it.  I can see function code settings, but not sure what it means.
    Looks like I managed to mess something up internally when I deleted those incorrect function codes because my program works fine.  Its when I return to SAP that this happens.
    Also tried logging off and logging on in hopes that it was transient, but still happening.  8-(
    Thank you for your help.
    Dean Atteberry.

  • What is the include for text variable?

    Dear Friends
    I am trying to add a customer exit for text variables.
    I have done variable exits for things like fiscal period but not for customer exit TEXT variables.
    I could not find any text variable code in the include ZXRSRU01  .
    Please advise what should be the program name?
    Is it found in a different include?
    regards
    Bass

    Hi Bass,
    Customer exit for text variables is also the same how we create customer exits for characterisitics variable. As per the clarity what i got from ur question.
    I'll just explain a small program in customer exits which will act as a text variable.
    Go to SE38 -->
    Display the program ZXRSRU01 --> (This can be done only if you have added the enhancement of the system from CMOD)
    Then add ur following case statement to the existing code.
    After all the data declarations start ur main program
    when 'YEAR_CUST'.
      if i_step = 2.
        l_year1 = sy-datum+2(2). //Data declaration
        l_mon1 = sy-datum+4(2).  // Data Declaration
       l_date1 = sy-datum+6(2). // Data Declaration
         case l_mon1. //case statement which has the technical name of ur Exit variable
         when  '01'. // This statement generally checks the whether the given variable entry has a value '01' then enters the statement here and returns the value as JAN //
              CONCATENATE 'JAN' l_year1 into dat.
              l_s_range-low = dat.
              l_s_range-high = l_s_range-low.
              l_s_range-sign = 'I'.
              l_s_range-opt = 'EQ'.
              APPEND l_s_range TO e_t_range.
              endcase.
             ENDIF.
    Hope this helps u and have given the explanation as per the understanding of your questionand can give more clarity to you.

  • SAP Exits in Bex

    Hi,
      I need to create 2 SAP Exits on Fiscal Year and Posting Period....That will dynamically display Current Year and period data in report output
    Can you plese give me details process how can i create them and also which sap exit or replacement variables i have to use
    Thanks

    Hi,
    First of all, we cannot create SAP Exit Varibles. We Can create the Customer Exit varibles.
    I Guess, We have already a SAP Exit varible to get Current Fiscal year ,And also another SAP Exit varible to get Current Fiscal period also.
    In case , if we donot have any above varibles, we can create a Customer Exit varible.
    We have tons of similar coding in these forums.
    With rgds,
    Anil Kumar Sharma .P

  • SAP Exit

    Hi all,
             Below output we required, kindly guide me.
    User I/P: FISCAL YEAR/PERIOD - 001.2011
    Report:______ACTUAL_______VY_ACTUAL
    NET SALES--4000--
    4000
    User I/P: FISCAL YEAR/PERIOD - 002.2011
    Report:______ACTUAL_______VY_ACTUAL
    NET SALES--5000--
    9000
    If i have FEB 2011 it has to add jan and feb actual and put into VY_ACTUAL.
    Is there any standard SAP exit available for FISCAL YEAR/PERIOD . Kindly guide me.
    Thanks & Regards,
    R. Saravanan

    HI,
        Below code i written to find jan and i/p given year. EG: ZCE_C26
    User i/p current month and year i have find using this SAP exit: 0P_FPER.
    VY_ACTUAL: SELECTION FISCAL YEAR/PERIOD RESTRICT: VALUE RANGE: LOW: ZCE_C26 AND HIGH 0P_FPER.
    and VALUE TYPE = 10.  RIGHT CLICK FISCAL YEAR/PERIOD given constant selection also.
    But my output: user given input month only displaying in VY_ACTUAL column. If i giving ZCE_C26 SINGLE it correctly showing jan of user input year. but given in range not all month data getting added. Please help me.
    CODE:
    WHEN 'ZFP_FIRST'.
        IF i_step = 2.
          CLEAR: zmm, zyy, zfiscper, zstrlen.
          LOOP AT i_t_var_range INTO loc_var_range WHERE vnam = '0P_FPER'.
            zmm = '001'.
            zyy = loc_var_range-low(4).
            CONCATENATE zyy zmm INTO zfiscper.
            CLEAR l_s_range.
            l_s_range-low  = zfiscper.
            l_s_range-sign = 'I'.
            l_s_range-opt  = 'EQ'.
            APPEND l_s_range TO e_t_range.
          ENDLOOP.
        ENDIF.

Maybe you are looking for