Standard SAP periodic job to schedule import of requests in target system?

Hello Folks,
Is SAP standadard job available to schedule periodic import of requests available in the target system. I know it is not advisable to do something like this, but i remeber some one telling me there is one available.
Regards,
Prashant

Thanks for you replies folks... so...there's no standard job available. Its got be scripts at OS level, and ofcourse scheduling "import all" options....
but as we agree, this is not a recommended option.
Have a good day...
regards,
Prashant

Similar Messages

Importing transport request bypassing quality system

HI,
I have a transport request in DEV BW system which is released. For some reason my Quality BW system is down so I cannot import the request in Quality BW system.
Usually we release the request from DEV , say request number DBIK1234, then import that request in quality system. After that we import the same request DBIK1234 into Production.
But for some reason quality system is down, so can we import the request bypassing the quality and directly into Production BW system??
Regards,
Rahul S

Hi Rahul,
Directly Transporting to PRD from DEV is not considered a "Best Practice"
and is therefore not encouraged. You should import into QAS first then the
Request is available in the PRD import buffer, and you can bypass the
recommended testing process if you really want to. However it is still
possible to import directly into PRD by manually adding the Transport
Request to the import Buffer.
We can also configure our TMS to add released TR's to Quality and PRD importing at the same time.
Better if you go through Transport Management System Documentations before you take decision.
Hope this answers your question.
Regards
Ramesh V

SAP BPM Job Documentation - Mass Import

Hello,
A few questions regarding the feature of job documentation in Solution Manager Job Management.
When doing a mass import of the jobs by RFC we had the following issues:
1 - The import process takes a lot of time, there are thousands of queries to DMDattribute table. I'm only importing 190 jobs that took around 15-30 minutes. Do you know any note or configuration to fix this?
2 - Because import took a lot of time, the first time we had a timeout of 600s in ICM, and the import process was interrupted. How can we massively delete the jobs documentation? I know that the standard procedure is not to delete, but to change the jobs status to 'DELETED', but still if I could really deleted them and redo the import from scratch would be a lot better. If mass delete is not possible, is there a way of doing a mass update of the job status, from "IN PROCESSING" to "DELETED"?
Thanks in advance and hope to hear from you soon,
Daniel Garrido

Hello Daniel Garrido,
did you find an answer to this question? I`m facing the same situation and do not know how to delete hundreds of jobs.
I would be very happy to hear from you.soon
Alexandra Berner

SAP TDMS - Could not copy A002 Relationships to the target system

Hi,
I had used HCM package for PD & PA from TDMS to transfer the Organizational Management data for couple of records. Everything went fine except that the A002 relationship records were not copied to the target system.
I had verified the target ranges that were defined and it has the Object Type "S" included in it.
But still the A002 relationship records were not copied.
Can anyone help me out with a solution on how to transfer the A002 Relationship records to the target system?.
I had defined the Object Types CP, P, A, AG, BP, C, EK, ET, G4, G7, GE, NA, O, Q, RY, S, T, UG and US. Is there anything wrong with my target areas definition?.
Thanks and Regards,
Anil.

Hi,
have your checked if there is a lock for that relationship in table T77Tr in target system?
Regards,
Ana

Import Transport Request

Hi,
When i click on import transport request to import the request to target system (DEV to QTY) ,what process will be happen in background.
Thanku
Edited by: d pavani on Jan 24, 2011 10:18 AM

> When i click on import transport request to import the request to target system (DEV to QTY) ,what process will be happen in background.
- the system starts "tp import <transport> pf=<transport profile>"
- tp calls R3trans
- R3trans triggers an event in the system to start postprocessing
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/44/b4a0137acc11d1899e0000e829fbbd/frameset.htm
Markus

Importing Transport requests

Hi,
When i click on import transport request to import the request to target system (DEV to QTY) ,what process will be happen in background.
Thanku

This is a very basic question and can be easily answered by doing some reading and research on your own.
Please read the "Rules of Engagement".

IDOC ReOrg Standard SAP Job ?

I am not sure if this forum is the appropriate one to ask the following question ?
Is there a Standard SAP Reorg Job (such the ones listed in Note 160873) that does IDOC reorg ?
Or I have to set something myself ?
Thanks in advance,
Tom

Perhaps this helps :
BAPI for filling variant configuration in an equipment

Unable to open the export file during Import ABAP phase on tar(System copy)

Hi Experts,
We are encountering the following error during Import ABAP phase on target system as we are performing system copy on target system as part of hardware migration(Data center migration).
Scenario:
Sourrce system - BI- ABAP(7.01), Win 2003 x64 unicode,Oracle 10.2.0.4
Target system - BI-ABAP(7.01), Win 2008 R2 unicode, Oracle 11.2.0.1
Actually on source system the data has been generated using migration monitor by using table splitting option and transferred on target system thru ftp option.
During Import process while selecting the Database installation type we have selected the installation method as "Standard systemcopy/Migration(load based)" and not checked the option "Start Migration montior Manually".
As far as my concern this error has nothing to do with this selection.please correct me If i am wrong.
T:\usr\sap\BWS\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20110428082000
T:\usr\sap\BWS\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/701_REL/src/R3ld/R3load/R3ldmain.c#5 $ SAP
T:\usr\sap\BWS\SYS\exe\uc\NTAMD64\R3load.exe: version R7.01/V1.4 [UNICODE]
Compiled Feb 24 2009 23:41:07
T:\usr\sap\BWS\SYS\exe\uc\NTAMD64\R3load.exe -dbcodepage 4103 -i test_MIGKEY.cmd -l test_MIGKEY.log -K
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(TFH) ERROR: Unable to open
10.207.3.59\d$\ftproot\import_sap\BWS\ABAP\DATA\ARFCSDATA.TOC
(TFH) ERROR: OS error message: Invalid argument
T:\usr\sap\BWS\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
T:\usr\sap\BWS\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20110428082003
Kindly revert with resolutions and suggestions and any hint to the oss notes as we haven't found anything specific to this error.
Regrds,
Dheeraj

\\10.207.3.59\d$\ftproot\import_sap\BWS\ABAP\DATA\ARFCSDATA.TOC
Please check if above said file located under specified path where SAPINST searvhing for it ie at
10.207.3.59\d$\ftproot\import_sap\BWS\ABAP\DATA. if this file dont exist them it may be the case that your export is not proper.
Also check if user from which you have started this SAPINST is able to access
10.207.3.59\d$\ftproot\import_sap\BWS\ABAP\DATA.
Thanks..
Mohit

I want to revoke rights so users cannot schedule periodic jobs

We do encourage users to run reports in Background but we want to prevent them from scheduling periodic jobs.
We want to have more controll over periodic jobs as we observed that users schedule them and then forget about them.
Morover this has become our audit recommendation.
As far as I can see there is no standard way to do it.
Has anyone managed to achieve it?

Hi..
while searching for the answer i have seen following interesting point.chk whether this will help you..
A job is eligible to start when both of the following are true:
The start condition specified for the job is met.
The job has been released to run.
No job can be run until it has been released, even those scheduled to start immediately. To monitor and control what jobs are submitted to run in background processing, the system can be configured so an administrator can check jobs before releasing them to run.
The release requirement can also be turned off on a per-user basis. Trusted users can be given a special authorization (authorization object S_BTCH_JOB (Batch Processing: Operations on Batch Jobs), value RELE) which will automatically and immediately release any job scheduled by that user.
http://help.sap.com/saphelp_nw2004s/helpdata/en/20/2d513897110872e10000009b38f889/content.htm
thank you
<b><removed_by_moderator></b>

Job Scheduling in Solution Manager - Error creating Periodic Job

Hi all,
I am in the process of testing the Job Scheduling functionality using the Solution Manager. I have setup the criteria manager, ec. in the satellite system, and done the config in Solman as well.
I am able to successfully setup up a 'on-time' job.
it's only when I try to setup a periodic job, I end up getting following error
Any thoughts? Is there any piece of config that's missing? All the SICF services needed for this functionality are running fine.
Thanks for the help.
500 Internal Server Error
Error when processing your request
What has happened?
The URL https://fsspsm.target.com:/sap/bc/webdynpro/sap/wd_ags_ejr_job_req_gaf_app was not called due to an error.
Note
The following error text was processed in the system PSM : Message was not created
The error occurred on the application server fsspsmap01_PSM_00 and in the work process 1 .
The termination type was: ERROR_MESSAGE_STATE
The ABAP call stack was:
Function: BAPI_NOTIFICATION_CREATE of program SAPLDSWP_NOTIF
Method: MSG_SUBMIT of program CL_DSMOP_BSP_NOTI_MODEL=======CP
Method: SUBMIT_REQ_CRM_DATA of program CL_AGS_EJR_JOB_REQUEST_FACTORYCP
Method: SUBMIT of program CL_AGS_EJR_JOB_REQUEST_FACTORYCP
Method: PROCESS_SCENARIO_PERIODIC of program CL_AGS_EJR_JSM_PROC_STANDARD==CP
Method: PROCESS_JOB_SCENARIO of program CL_AGS_EJR_JSM_PROC_STANDARD==CP
Method: IF_AGS_EJR_JSM_PROC_FPM_CTRL~AFTER_PROCESS_EVENT of program CL_AGS_EJR_JSM_PROC_STANDARD==CP
Method: AFTER_PROCESS_EVENT of program /1BCWDY/K54G9RCMK7J4Z427H49S==CP
Method: IWCI_IF_FPM_APP_CONTROLLER~AFTER_PROCESS_EVENT of program /1BCWDY/K54G9RCMK7J4Z427H49S==CP
Method: CALL_UIBB_PROCESS_EVENT of program CL_FPM========================CP

Hello,
This is the basic Job Scheduling functionality and not the Redwood Job scheduling, correct?
Have you performed the IMG Activiteis in SPRO?
See the following Help link:
http://help.sap.com/saphelp_sm70ehp1_sp23/helpdata/en/c5/7edcbd58ce4e29bc1baf1c4761d71f/frameset.htm
Change a job
You can change the scheduling of a job as long as it has not been completed. Proceed as follows:
Make changes.
Note
When you change a periodic job, the system searches for the changeable successor and only changes this successor.
If there is more than one changeable job with the same name, the system does not change any of these jobs.
End of the note.
Save your entries.
To release the job in the target system, select Release.
You go to the transaction SM37 in the target system.
You just may want to ensure HTTP Services have been enabled. I realize you said the services workin SICF, but this needs to be verified as 500 Internal Server Error most often means the HTTP services are not activated.
Regards,
Paul

How to Schedule SAP background job at OS Level

Hi All,
Can Anyone tell me how to Schedule SAP background job at OS Level (unix).
Regards,
Anil

Hi Anil,
I donu2019t know your requirements, anyway itu2019s possible to setup your SAP job in order to start after an event, and after that you can get the event triggered from the Operating System in the following way:
- log into you Operating System with the SIDadm user id (at the Operating System level) and go to directory /usr/sap/SID/SYS/exe/run
- Run the SAPEVT executable as follows:
sapevt YOUR_EVENT -t pf=/usr/sap/SID/SYS/profile/DEV_DVEBMGS00_server001 nr=01
This will raise the event, and cause the job scheduled within SAP to execute.
You can periodically execute this job with crontab.
Thanks,
Federico Biavati

Problem in periodic job scheduling in LBWE

hi,
i have activated the Material movements datasource 2LIS_03_BF. Filled up the set up table.
now when i try to schedula a job in jobcontrol, under the tab *immediate* the immediate start check box is checked and disabled. the periodic job check boxat the bottom is unchecked and disabled.
the periodic values button which has to be near the check button is not present.
i even tried for other datasources, the periodic job is disabled in all and periodic values button is not found.
could anyone suggest me on this issue.

Hi,
Did you initialize delta for 2LIS_03_BF from BI? If not, first initialize the delta and try to schedule V3 job from LBWE.
By default *Immediate start * check box will be in disable mode. If you want to run it immediately just click on Save button.
If you want to schedule it for future date and time then click on Date/time button then enter schedule start date and time and click on Save button.For more details about scheduling options please look at following link.
http://help.sap.com/saphelp_nw04/helpdata/EN/c4/3a7fae505211d189550000e829fbbd/frameset.htm
hope it works...
regards,
Raju
Edited by: VaraPrasadraju Potturi on Aug 3, 2009 8:54 AM
Edited by: VaraPrasadraju Potturi on Aug 3, 2009 9:02 AM

NWDS - Importing standard SAp packages

Hi,
I am new to NWDS java developmennt.
I have succesfully developed, deployed a demo EJB to J2EE and also able to execute it from my SAP portal server.
I am trying to use the user management API ot Portal (like package com.sap.security.api), however when I write the following statement, it gives an error on my local NWDS build.
import com.sap.security.api;
Question is how do I refer to this remote package (or any other SAP package) which is lying on J2EE on my local NWDS software build.
Thanks,
Amit Jain

This is answered. The standard SAP packages are available on local machine.
Right click on project->properties
Selectr Java Build path-> Libraries->Add Variable->Select ECLIPSE_HOME
Hit Extend
Select Plugins
Select com.sap.security_2.0.0
Now the import com.sap.security.api.* statement will not give any syntax errors.
Closing the thread.

Error in Importing standard SAP DCs to Production system

Hi All
I am trying to do a transport from QA to Production system. 3 of the standard components
sap.com_GP-CORE
sap.com_CAF-MF
sap.com_CAF
are not getting imported to Prod. It gives an error
caused by Exception:com.sap.cms.tcs.beans.exception.TCSDeployException_Communication: The user 'cedeploy' could not be connected to the specified host 'bhbc1ce01.ent.bhicorp.com'and port '50004'.:The user 'cedeploy' could not be connected to the specified host 'bhbc1ce01.ent.bhicorp.com'and port '50004'.
com.sap.cms.tcs.beans.exception.TCSDeployException_Communication: The user 'cedeploy' could not be connected to the specified host 'bhbc1ce01.ent.bhicorp.com'and port '50004'.
The user is not locked. I managed to import the rest of the components to Prod with the same user ID.
Only thing i am able to notice is that, the Owner for these 3 components are "jointadm" and the rest of the other components had owner as "Make".
Please give me your suggestion.
regards
Deepu

HI,
Under the runtime systems tab in CMS lanscape configurator,
check the username and password details given for thr production runtime system .
also once save the configuration.
Regards,
Satya.

Restrict Periodic jobs scheduling from SM36 or any other t-code

HI,
We would like to restrict users from scheduling periodic background jobs. Immediate jobs will be fine.
And also one more concerns is that user should not be able to directly execute any report or transaction in background periodically.
In short immediate jobs will be fine but users should not be able to set periodic jobs by any T-code.
Thanks,
Chandresh Pranami

If you search for "btcoptions" you will find a comprehensive discussion about this, and a development suggestion in the wiki.
I attempted the same and ended up recreating the UI from scratch and scheduling the report + variant from a parameter transaction they are authorized for, but the user can navigate in many transactions showing this option.
A compensating control when retiring users and central batch administration with monitoring is easier.
Cheers,
Julius

Standard SAP periodic job to schedule import of requests in target system?

Similar Messages

Maybe you are looking for