Standard SC's required for creating BPM Process ?

Hi All,
When I follow below path :
Right Click on Track ->New->Development Component->List containing type of DC....
But few of them are disabled (Process Composer,Rules Composer).
When I click on them I get below error----
Software Component does not support this Development Component Type. Required DCs are located in an SC that is not visible from the selected SC.

Hi Sheetal,
The information could be found in this thread:
NWDI Track for BPM
NWDI Track for BPM
Hope that helps,
Martin

Similar Messages

In what situation i can go for the BPM process?

hai pals,
     i wld like know in what kind of situation we will go for an BPM process for message transfer.
with regards,
rajesh.

Hi Rajesh,
   BPM process is a very useful tool as the name suggest ccBPM when ever you want to model your soultion hitting different systems, Also helps in controling and monitoring complex integration solution process.
    As it uses SAP workflow engine behind it is very effective in building complex soultion.
    some simple scenarios could be
     Wait for more than one input and start your integration process..
     Raising alerts, exceptions and so on...
cheers,
Vedavyas
Message was edited by: Vedavyas Cuntheepuram

Authorization required for creating new Organizational units

Hi all,
How can we give authorization required for creating new Organizational units (IMG CRM Master Data Organizational Management Organizational Model Create Organizational Model) to a particular user?
Thanks and Regards,
Archana

the basis guy should be able to help.
at a higher level: you need to set authorizations to the roles assigned, the transaction code is pfcg.
you may create a new role with the required authorization and assign to the relevant users.
hope it helps..
regards
RH

Authorization required for creating new Organizational units in CRM

Hi all,
How can we give authorization required for creating new Organizational units (IMG CRM Master Data Organizational Management Organizational Model Create Organizational Model) to a particular user?
Thanks and Regards,
Archana

Hi archana,
U can Create a role through Transaction PFCG.
Just create a role and assign the tcode PPOCA_CRM if u want to give the user just only this authorization otherwise u can select the menu list from sap menu and assign this role to that user.
Another way is if that user already exist in that system then just assign that particular transaction codr with that user.
Hope it will help u
Regards
Subhash

LSMW: standard batch direct input for create document & document str

hello expert .
Is there any standard batch direct input for create document (tcode: cv01n ) & document structure (cv11) using lsmw.
regards
srinivas

Hi Srnivas,
I am not able to find direct input progarm for this, but there is one standard bapi available for this with name BAPI_DOCUMENT_CREATE you can use this.
Regards
Dhirendra

Synchronous start event for a BPM process??

Hi,
If I trigger a BPM Process from say a BSP Application(Shld be able to do this as all I need is a Service Interface (Start Event) related to the BPM), If for some reason the process fails to start -- Is there a way of having a response that would let the triggering application know that the BPM process instantiation has failed...
What I am trying to understand is :
1)would the Service Interface for the BPM start Event, provide a response ?...??
2)Is it possible to have some kind of logic implementation for this Service Interface(that starts a BPM Process) ??
Eventhough there was a similar message in the forum, I wanted to have a clear picture ....
A detailed reply would be highly appreciated ..Thanks !
Best Regards,
Arun

Hi Arun,
I guess you need to distinguish 2 to 3 cases here:
In case you used a snychronous call in the service interface definition assigned to the process start event it will result in a SOAP fault, which says that the process started successfully. Reason for that is explained here: Starting a BPM Process - Where is the Service?
Problems within your process would also not be reflected in the SOAP message (e.g. if there is some issue within the first step after the process has been started). I guess that is somehow obvious as the process has been started after all, but I wanted to state it anyways.
Finally and that's possibly the most important point for you: If there are any problems during the instantiation and in the end no process has been started then this should be reflected in the SOAP result. If not I would consider it as an issue in the implementation and would like to ask you to open a ticket for it on http://service.sap.com/message
More details could be found in the documentation:
Starting a Process
https://help.sap.com/saphelp_nwce711/helpdata/en/62/a6d7ac03994e0796c6b949c8952547/frameset.htm
Creating Service Interface Definitions
https://help.sap.com/saphelp_nwce711/helpdata/en/47/62632a3c304359e10000000a42189c/frameset.htm
Hope that helps,
Martin

Issue with Service Group Configuration for a BPM Process

Hi,
I am working on BPM processes on CE 711. I need to use the Service Group settings. I created a BPM process with a automated activity that maps to an enterprise service in HU2 (SAP ES Workplace system).
After setting up the configuration in NWA for service registry and service group, I run the BPM process. The Enterprise Service runs into error and log records it as 'No matching BindingData is found for SOA smart configuration'. I have done most of the configuration as recommended but the matching end point
url seems to be picked wrongly [http://erp.esworkplace.sap.com/sap/bc/srt/xip/sap/ecc_employeebasicdbyemployeeqr?sap-client=800] .
I could not get any info on notes search and could not get much info about service group config. Any help here is greatly appreciated.
Regards
Suresh

Hi Suresh,
i just got an answer on my ticket. Here it is:
There is a known issue with the upper case of the endpoint published in
the Services Registry and in the WSDL.
Before SP2 the matching for the binding for invocation is done
by the endpoint url. There is a known issue that the endpoint published
in the Services Registry is with lower case of the characters but in theWSDL the endpoint is with upper case. In your case the endpoint url in
the Services Registry is as shown in the exception above:
http://erp.esworkplace.sap.com/sap/bc/srt/xip/sap/ecc_srvcreqcrtrc?sap-client=800
but in the WSDL the endpoint url is with upper case of the endpoint:
../ECC_SRVCREQCRTRC/..
Because of this difference the call fails. This is fixed is 711 SP2.
Workaround for this is if you create a Provider System based on your
WSDL, not a Services Registry one.
Hope that helps...
Best regards
Michael

Need standard Bapi or FM for creating General Ledger (FS00 transaction)

Hi,
I need to upload (create) Master General Ledger data.
My requirement is to use standard Bapi or FM for this purpose.
Please tell me which Bapi or FM i can use for this purpose.
Thanks in advance.

Hi Suresh,
The Function module you specified is not released. So, I cant use it. Thanks for your suggestion.
Hi friends,
My requirement is to create General Ledger Account (FS00 or FS01) using a standard Bapi or FM. Please tell me which Bapi or FM I can use for this purpose.
I identified one related Bapi for this purpose (BAPI_ACC_GL_POSTING_POST). But my functional consultant says it is for posting General Ledger and cannot be used for ceating General Ledger account.
Please clarify me.

Help required for Creation of process chain for Open hub destination(table)

Hi Experts,
I am working on creating process chain for the open hub destination which is targeting data transfer into Table. Which is then push to SAP PI.
2.) Steps to create a process chain for OHD????? Not knowing and even after that
3.) What are the steps for Pushing it to PI (I mean we have generated client proxy also) But need to know ABAP related to trigger process chain
please need your expertise and knowledge. Well atleast with the point 2 I need BI experts help...
Regards,
[Gaurav Patwari|http://gauravpatwari.wordpress.com]

Hi Gaurav,
Creating Process chain for OHD.
1. Go to RSPC-> Create a astart variant.
2. Click on process typesin the menu. Fourth from the left. Under this go to LOAD PROCESSES AND POST PROCESSING option.
3. The fifth option is "DATA EXPORT INTO EXTERNAL SYSTEMS". Click on that.
4. Click on F4 and choose your infospoke name.
5. Press the RIGHT button.(if it asks for variant, create a new variant in the same small window besideswritting bar).
6. Join the START process and the 2nd process via dragging.
7. Now add your required other processes.
The general process chain processes are :
1. Start.
2. Delete Indexes (if data loaded to cube).
3. Load process.
4. Delete duplicate request (if it is a full load in cube).
5. Create Indexes.
Hope it helps.
Preet

Problem in generating WSDL file for triggering BPM process

Hello Experts,
I have a working BPM process which I want to trigger using a web service. I am referring following blog link to generate New WSDL file and perform further operations:
/people/arafat.farooqui/blog/2009/08/13/introduction-to-sap-netweaver-bpm-part-4
However, it everything goes well until I set the type for the "New Element". I want to set type to context of my component controller. So I selected Set type --> Enclosing Project and I seleted Context of my component controller.
Upon saving this, I am getting this error:
"../../rep/ui/com.sap.demo.wd_ui_mna.wd.comp.c_fillmynameage.C_FillMyNameAgeInterface.xsd" is not a path relative to "src/wsdl/NewWSDLFile.wsdl" because it contains too many '../'
I am not sure what is happening here. I have also removed the response element(s) from WSDL source.
What am I missing here?
Thanks in advance,
Ameya

Cross post in EBiz forum -
General EBS Discussion
Regards,
Anuj

Delete all instance for the BPM process

How can I delete all instances or specific instance of the BPM Process except redeploy the process and unchecked the keep all instance option??

Hi
Just a small correction. When you ReDeploy Workflow SCA file and Uncheck the option to keep running instances, if I am not wrong, all OLD instances are NOT deleted. They just become STALE (change the status). BUT these instances are still there in the Database but not show up in the Worklist/Workspace app. You may see these Tasks but you CANNOT open them and it says like Task Details Not Found etc.
But if your intention is to delete the instances permanently, then see the earlier post on how to delete from EM. This will take care of permanently deleting.
Thanks
Ravi Jegga

What are the "Add to Loop Library" requirements for creating automatically conforming loops?

I am trying to create my own loops that conform to the tempo and key of a song. I have made several loops in this way by selecting a region that is exactly 4 bars, for example, and then selecting "Add to Loop Library". If the sample is cut correctly, the "Type:" field is enabled which allows you to make it a Loop and therefore have it automatically conform to the song tempo.
In the past I have made loops that were very long, up to 128 beats, for the purpose of making mashups using instrumental tracks that I want to conform to the song. I now can't seem to create a large loop but I am not sure why. I know it is possible, but I don't know the steps I took to get there.
What are the exact requirements that allow a loop to be added to the loop library while also conforming to song key and tempo?

In the past I have made loops that were very long, up to 128 beats
The longest loop I managed to save as "Loop" had 55 measures (220 beats, 203 bpm). Longer loops could only be saved as "One shot". And the loop had to be cut at the end, not simply be trimmed by dragging the end of the region. The tempo matters; for a slow song the loop can only have fewer measures.

How to create BPM process instances?

I need to use java to create new BPM 11.1.1.5 process instances.
How to connect to bpm and use API?
Can anyone paste detail code sources?

Thanks Evolution...i actually missed out this lookup....
Now provisioning is working fine for other resource object also...
I have one more doubts regarding child table...i am using the same child table UD_ADUSRC for this resource object also and when i assigned any group membership thru this child table (in AD User1) it gives me DOBJ.insert failed error. I have checked the tasks (+Add user to group, Remove user from group, update user to group+) and all are referring the correct attrs (as in AD User). There is mapping defined in Resource Object and Process definition for Reconciliation also but recon any user with group membership is also giving me error...
can't we use one child form in two process forms ? any other configuration which i should check?
I am using the same look up for Reconciliation mapping attrs for both the resource objects (AD User and AD User1)....

Urgent requirement for creating delivery and doing PGI against the PO

Hi Guyes,
I have a requirement where i need to create a delivery and need to do the PGI for STO. Means against the STO we need to do the PGI.Can you please inform me using which process code I can create the delivery and can do the PGI for one STO.

Can we Use process code DELV to create outbound delivery against the STO and also can we do the the PGI by WMMB or DESA? If any body has any idea please reply me back

Auth objects required for creating super,power,end user roles

Hi ,
I need to create 3 roles according to the below requirement. can you tell me what auth objects req inorder to fulfill customer requirement.
1.     Super User:
     Have the access to Create/Modify/Delete own queries
     Can create Variables, CKF, Structures, Formulas & RKF at the cube level (global)
2.     Power User :
     Have the access to Create/Modify/Delete own queries
     Can create Structures, Formulas at the query level
3.     End User
     Have the access to run and navigate reports at the local level
Hope I will get reply soon
Thanks

Karunakar -
Few things you have to keep in mind when you are giving access to the reports and queries.
S_RS_COMP only will not do.
have you assigned S_RS_COMP1 and S_RS_MPRO for info areas and multi/info providers.
and one more auth object S_RS_ICUBE for info cubes. you have to assign what ever the info cubes that you need to give access to the users.
Then only user will get full access.
precisely in order you can say,
S_RS_COMP
S_RS_COMP1
S_RS_ICUBE
and S_RS_MPRO.
These are main auth objects which are related to info cube, info area access and BEx access.
Hope this would give you clear pic.

Standard SC's required for creating BPM Process ?

Similar Messages

Maybe you are looking for