Standard search help problem with merchandise category

Hi,
I am not sure if i am posting into the right forum. Any hints would help.
The transaction RWBE is run on ECC6 and a search help is triggered for merchandise category (first field).
A second screen appears to enter the range..I just press enter and it gives me a range of value to select from.
It works fine.
But the same transaction is called in our Portal and the search help goes for a short dump when pressing enter from the second screen.
I debugged both ECC and portal for this transaction and found that the function module TABCONTROL_RETRIEVE_SEL_OPTS is returning different values that is causing the short dump in portal.
The value of the parameter for select_options is returned as
SHLPNAME                       SHLPFIELD                      SIGN OPTION
HUGO                          |1801                          |I   |IQ     |
HUGO                          |1803                          |I   |IQ     |
if you see the option is returned as IQ and hence causing the short dump.
I am not able to find out how this value is returned. Because if you see inside the above function module, another function module DP_GET_TABLE returns the above value. But when i debug it, i am directed to DDIF_FIELDINFO_GET fm and hence not able to understand how the above values are retrieved.
Any help would be rewarded.

Try using shlp instead of table shlp_tab

Similar Messages

Qtn: I have 10 standard elementary search helps in collective standard search help, how to deactivate the 10th elementary search help?

Qtn: I have 10 standard elementary search helps in collective standard search help, how to deactivate the 10th elementary search help?

Hello,
this topic is still a problem for me, does anybody have an idea.
Just to show what's my problem:
Collective Search help KRED does include a SAP append-search help ASH_KRED which holds the elementary search helps KREDC, KREDE, KREDM, KREDW.
The search helps KREDE, KREDM, KREDW should not be displayed, so I added another Serach-Help-Append ZKRED_CUST at the end of CSH KRED which holds these 3 SH's with the hidden flag.
That works, the SH's are not shown anymore.
I also added some other of the Original SAP SH's (e.g. KREDA) with the hidden flag and added changed copies of these (e.g ZKREDA) there to be shown instead.
All this can be done modification free by appends.
The folders of the elementary search helps are shown in the order as they are found included in the KRED SH and the append to this SH.
This means that the not hidden Sh KREDC from ASH_KRED is shown before all the "custimized" ZKREDx -SH's. But we need this SH not very often, so that I want it to displayed al the right-most position of the folders of SH's or at the most down postition of the drop-down-selection of SH's.
But I have not found any way to do this modification free.
The only way to archive this is to modify ASH_KRED by setting the Hidden-Flag for KREDC and add this SH at the end of append-SH ZKRED_CUST again.
But I want avoid this modification.
So, is there any way to do this without modifing any of the original SAP SH's ?
Helmut Fischer

Getting the value of a dynpro field in an exit for a standard search help.

Hallo Experts!
I need to modify the selected data displayed in standard sap search help: H_T357
What I've done is create an exit for the search help.
Then, when CALLCONTROL-STEP = 'DISP' I use the function module F4UT_PARAMETER_VALUE_GET and I get the value of the parameter 'WERKS' correctly. I think that this function module can only obtain values from the parameters of the search help. Well, here is the problem, I would like to get the values of dynpro fields
'ILOA-STORT' and 'VIQMEL-QMART' (warning type) in transaction IW21.
I prefer not to add these fields as parameters to the standard search help: H_T357.
Any ideas for getting the value of these fields? I've seen functions modules: F4UT_GET_ENVIRONMENT and F4UT_SH_SIC_GET_FIELDS. But I don't know if I can use them for my porpuses.
Thanks a lot in advance.

Hello again,
I have already solved the problem using function module 'DYNP_VALUES_READ'.
Thanks, David.

Clear error message on F4 standard search help in webdynpro abap

Hi Gurus,
We have a check on the data entered by the user in our webdynpro producing a error message if the data are not correct. My problem is that this message is also diplayed in the search help afterwards when the user clicks on the search help. I know how to clear an error message but I can't find the event triggered by the F4 search help to put my code. The search help is a standard search help and thus I can't modify it.
All I want is to find the event triggered when the user clicks on the search help. The field is in an alv but the alv click or alv action are not triggered when the user clicks on the search help.
Thanks for your help in advance guys.

Yes. It is called a Freely Defined Value Help if you want to have complete control of the UI that is displayed in the dialog:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/47/9ef8cc9b5e3c5ce10000000a421937/frameset.htm

Calling a standard search help from MS Office

One of the companies I work for has integration with Microsoft Office so users can create SAP DMS (document management system for those who aren't familiar with it) entries directly from e.g. Microsoft Word. The integration solution is a custom .Net application.
In addition to the obvious integration to create the DMS info record and assign the document as an original the integration solution lets the user provide classification data. Some changes are now being planned, and one of them is challenging as a new characteristic (for the classification) will be used to store an organization unit. This is straightforward when the user is in the SAP GUI, as the standard search help can easily be displayed from custom code.
Being a technology optimist I was hoping that with the new fancy technologies SAP would have provided a way to use .NET integration to display a standard search help from the MS Office integration dialogue - but so far I have not been able to find any information supporting this hope. Luckily I am not the developer working with the integration dialogue, but unless the mentioned possibility exists it looks like we have to resort to passing all organization units to the interface so a hierarchy can be constructed and displayed to the user for selection.
Another alternative (I think) is to recreate the dialogue as a web dynpro screen, which will give us all the advantages of operating "inside" SAP. However, I am not sure if this is possible either. Can a web dynpro screen be called from an MS Office application (.Net), and can that web dynpro screen return values to the (external) calling application? In my simple view of the world this should be doable, if not otherwise it should at least be possibly by wrapping the screen in a function module that is exposed so the .Net application can call it - either by RFC or as a web service.
Microsoft Office version is 2003.
SAP release is ECC 6.0 (Netweaver 7.0).
I think this is the right forum for my question. My apologies if it isn't (and any guidance towards a more appropriate forum would then be appreciated).

Not solvable I suppose. There should be a way to close messages without marking them as answered.

Some questions about standard search help in WD4A

Hello all,
I use the SAP standard search help for a business partner number input field. It works fine, but I need to customize the result popup a bit. I have the following issues:
1. After the search I get a table with a list of all found business partners. The columns are not sortable. Can I change them to sortable (as in SAP GUI)?
2. How can I add another field/column to the result list (birth date)?
3. Per default 10 hits are shown on one page in this result table. Is it possible to show more hits at once?
Best regards and thanks for all help,
Matthias

Hi Matthias,
first of all let's say that the Search Help has been changed a lot in the different SP level.
Looking in a NW7.0 SP12 I can see that:
1. It's not possible
2. You have to change the Search Help definition in DDIC (/nSE11)
3. Via the Settings link in the TOP LEFT you can change the value (but in my system it is set to 500)
Keep in mind that WDA support a freely programmed Search Help where you can do everything you want...but it requires coding...
Sergio

Search Help - Restricting entries in standard search helps

Hi, is there any way to restrict entries in an SAP supplied search help? The search help in question is 'SSH_T007A', this search help also has a user exit 'F4_TAXCODE_USER_EXIT'. I'm not sure if the user exit is of any use or how to use it. Ideally what I need to do is to restrict the list of applicable tax codes to only those that we want our users to select. Does anyone have an idea of how to do this with a minimum of customization?
Thanks in advance,
Kevin May

Hi Seshatal,
     Thanks for the input, but this field does NOT have any ON VALUE REQUEST event associated with it ....
   as soon as F4 is hit, it goes to Function help_start ,so I don't think we can make any changes here as it is standard .
   I think including a standard search help will help....how to achieve this ?
Thanks,

KOST : Search Help Problem

Hello All,
we are doing ECC6 Upgrade, due to return to standard, custom elemetary search helps are missing in standard collective search help KOST.
I have added two custom elementary search helps to standard collective search help KOST.
now the issue is, selected possible values are displayed and then after choose any value it's not returned to screen field.(this issue is only with custom search help added but other standard search help are working fine)
i checked all, even import and export are selected correctly in my custom elementary search help.
Only the difference is search help exit available in ECC6 for KOST but not in 4.7.
Kindly let me know suggestion on this issue.
Thanks,
Munvar Basha.

Hi Max,
Thanks for your answer.
They are executing the search entering selection criteria. In this case they should not tget their personal list.
I already tried and created my own personal list, and I was able to execute the search properly.
Br.
Csaba

Standard search help need for application directories

Hi All,
I have a created ztable.I want to assign a search help to this Z table field.
I need a search help which contains the apllication directories.
Is there any standarda serch help avliable to assign the application directories to the Z field of ztable.
Thanks,

I don't think there is a standard search help available, but there is a function which provides a F4 dialog box to search app server directories... You can try creating your own search help with it.
PARAMETERS p_file TYPE dxfile-filename.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CALL FUNCTION 'F4_DXFILENAME_4_DYNP'
EXPORTING
      dynpfield_filename = 'P_FILE'
      dyname                    = sy-repid
      dynumb                    = sy-dynnr
      filetype                     = 'P'
      location                    = 'A'
      server                       = ' '.
filetype: 'P' represents Physical file name; 'L' represents Logical file name.
location: 'A' represents Application Server; 'P' represents Presentation server.
P_FILE is parameter name (in your case it can be scree field name)
dyname = report name
dynumb = scree number

Standard Search Help in Custom Search Help

I've created a Custom Search Help for Product Hierarchy. But when search help window appears, I want to put a standard search help of Product Hierarchy on Product Hierarchy field which is located on Resctricted section. Is that possible? Let me know if there's a way...
Thank you

hello ibnu,
it is not possible i attach a standard search help mara
no such feature available .

How to copy a standard search help to another field

Hi All,
I have a BSP screen in that for one input field i need to copy the standard search help for the Business Partner. Could any one guide me how to copy the standard search help for the business partner into the input field in the BSP screen.
Thanks In advance for the help...
Thanks,
SAP SAP

Hi,
the BP search is its own web client UI component. For the integration you could check any standard transaction UI component like the BT115H_SLSO, as those contain several partner fields.
Best Regards,
Michael

Premiere Pro CS5: please help problem with importing a file error output "there was an error decompressing audio or video"

please help problem with importing a file error output "there was an error decompressing audio or video"

this is related to what adobe program/version?

Why is there no standard search help for table-field T056U-VZSKZ?

Hi Experts,
A blessed day.
Table-Field T056U-VZSKZ (Control table for calculation of interest on arrears-Interest calculation indicator or account number) is being used to provide the entries for a screen-field of a standard transaction for Account Determination: Posting Specifications. However, this table-field T056U-VZSKZ does not have a standard search-help. I've looked for an OSS for this, but wasn't able to find one. Is there a reason why this T056U-VZSKZ does not have the standard search help when VZSKZ is it's key field?
Thanks.
Regards,
ianne

Hi Marco,
When you attach the search help make sure you also attach the export parameter of the search help to the name column. That is in the tab 'Further characteristics' we have to pass two value. The search help name should be typed in place of 'Parameters' and the export parameter of the search help should be typed in the place of 'Name'.
Please try this and post back the updations.
Thanking you,
Jerry

Passing input parameter to an standard search help

Hi all.
I have the following code into my Z report:
PARAMETERS:
p_bukrs TYPE t8jv-bukrs OBLIGATORY,
p_vname TYPE t8jv-vname OBLIGATORY MATCHCODE OBJECT h_t8jv.
The SHLP H_T8JV has the field BUKRS as an import parameter. When the user executes the SHLP (press F4), I would like for it to reflect the value indicated by the user into the selection parameter P_BUKRS.
How can I do this?
Regards.
Gregory.

I guess you want to allow F4 to both parameters p_bukrs and p_vname, and both values have to be passed to the search help forth and back?
I also guess that vname is the first parameter of this search help?
In that case, you must not use MATCHCODE OBJECT at all, because it will link only one field at a time.
Instead, you must find out a structure (or create it) that have these 2 fields, each having the H_T8JV search help assigned (with correct parameter assignment too), and the selection screen parameters must refer to this structure.

Process On Value Request with Search Help Problem

I have a screen with a field that has a custom search help attached to it. I am using Process On Value-Request which ultimately uses function module F4IF_FIELD_VALUE_REQUEST to return the selected value from the search help. The value is then moved to the screen field.
THE PROBLEM: If I enter a value in a field on the screen, then use the search help from a different field the first value I entered gets cleared. Here is a code sample. Any suggestions as to why this is happening?
NOTE: The values that get cleared are fields on the screen that I do not reference at all in user_command_2501.
*****SCREEN 2500 FLOW LOGIC*********
PROCESS BEFORE OUTPUT.
MODULE status_2500.
PROCESS AFTER INPUT.
MODULE user_command_2500.
PROCESS ON VALUE-REQUEST.
FIELD makt-matnr MODULE user_command_2501.
MODULE user_command_2501 INPUT.
ok_code = sy-ucomm.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
       EXPORTING
            searchhelp      = 'ZWS_ASSETMATR'
            fieldname       = ' '
            tabname         = ' '
       TABLES
            return_tab      = search_itab
       EXCEPTIONS
            no_values_found = 1.
MOVE search_itab-fieldval TO: makt-matnr.
REFRESH search_itab.
SELECT SINGLE maktg FROM makt INTO crea_description
    WHERE matnr = search_itab-fieldval.
MOVE 'I' TO scrn_attr_sw.
sy-ucomm = 'ENTER'.
LEAVE SCREEN.
CALL SCREEN 2500.
ENDMODULE.                 " user_command_2501 INPUT
Message was edited by: Jason DeLuca
Message was edited by: Jason DeLuca

Hi Jason
It seems you should first revise your code since your POV is not implemented so good.
Regards
*--Serdar <a href="https://www.sdn.sap.com:443http://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.sdn.businesscard.sdnbusinesscard?u=qbk%2bsag%2bjiw%3d">[ BC ]</a>

Standard search help problem with merchandise category

Similar Messages

Maybe you are looking for