Standard selection

Hi
Iam using standard selection screen PNP in which payroll period is parameter in which we can enter only one payroll period,but i want selection screen to enter multiple periods?How can i change it>
Thanks in advance

Hi,
Try to find a screen exit for that particular screen and then change the screen.
Regards,
Lalit

Similar Messages

Add bottons on the application tool bar of the standard selection screen

Hi All,
I am having the standard selection screen in module pool programing. I wnat to add the bottons on the application tool bar of the standard selection screen.and hide the existing bottons (like std. execute and i bottons.)instead of these i want to give my won bottons like create and display.
pls help on this.

Hi Sridhar,
Try the Code below. It places two buttons on the selection-screen along with the execute button.
TABLES sscrfields.
PARAMETERS: p_carrid TYPE s_carr_id,
            p_cityfr TYPE s_from_cit.
SELECTION-SCREEN: FUNCTION KEY 1,
                  FUNCTION KEY 2.
INITIALIZATION.
sscrfields-functxt_01 = 'LH'.
sscrfields-functxt_02 = 'UA'.
AT SELECTION-SCREEN.
CASE sscrfields-ucomm.
      WHEN'FC01'.
      p_carrid = 'LH'.
      p_cityfr = 'Frankfurt'.
    WHEN 'FC02'.
      p_carrid = 'UA'.
      p_cityfr = 'Chicago'.
ENDCASE.
START-OF-SELECTION.
WRITE / 'START-OF-SELECTION'.
Just go to the table sscrfields to knoe the fields in it. I think this clears the issue.
Regards,
Swapna.

How to manage obligatory parameters on standard selection screen.

Hi all,
How could I ensure settings some fields-parameters as obligatory on standard selection screen-dynpro1000. I would like to manage this according choosen block. On standard dynpro 1000 I have two blocks for two different selections. Checkboxes ensure which block of selection parameters I want to use. When I check first checkbox I need to set parameters in first block as obligatory and reversely in second block.
Thanks. zd.

Another example...
report zrich_0003.
selection-screen begin of block b1 with frame .
parameters: p_check1 as checkbox user-command chk.
parameters: p_fielda type c modif id gp1.
parameters: p_fieldb type c modif id gp1.
parameters: p_fieldc type c modif id gp1.
selection-screen end of block b1.
selection-screen begin of block b2 with frame .
parameters: p_check2 as checkbox user-command chk.
parameters: p_fieldd type c modif id gp2.
parameters: p_fielde type c modif id gp2.
parameters: p_fieldf type c modif id gp2.
selection-screen end of block b2.
at selection-screen output.
if p_check1 = 'X'.
    loop at screen.
      if screen-group1 = 'GP1'.
        screen-required = '1'.
        modify screen.
      endif.
    endloop.
else.
    loop at screen.
      if screen-group1 = 'GP1'.
        screen-required = '0'.
        modify screen.
      endif.
    endloop.
endif.
if p_check2 = 'X'.
    loop at screen.
      if screen-group1 = 'GP2'.
        screen-required = '1'.
        modify screen.
      endif.
    endloop.
else.
    loop at screen.
      if screen-group1 = 'GP2'.
        screen-required = '0'.
        modify screen.
      endif.
    endloop.
endif.
Regards,
Rich Heilman

Button on standard selection screen

HI experts , can any budy tell me , that, can we put a button on the standard selection screen , means on screen no 1000, PLease suggest ur ans, i have a requirement to create a button on the first selection screen by selection the check box on the standard selection screen , a button should be appear on the standard selection screen.
THanks in advance,
Rahul

Hello,
What do you mean by "but ur second concept is wrong we can set our own pf-status then how can u say that set the status".
Read again what I wrote! I said that the solution for your problem is to create a PF status of your own and that one will substitute the STANDARD one. This is the reason for having to insert the Execute (F8) button on it. Otherwise, if you don't insert it, you wont be able to execute your report.
Also, plz reply if u know the exect ans? this is not nice to say, specialy when the answer is correct. I've inserted buttons in standard selections screen lot's of times.
Regards.
Valter Oliveira.

Standard selection screen

Hi all,
I have written a Z program using LDB PNP. Usually we get a standard selection screen where in we enter begda and endda. However I am getting a different type of standard screen for selection when I execute it with KEYDATE on it. What do I have to do get standard selection screen with start date and end date on it.
Cheers,

Thanks for the response.
The report category field is blank.

Including User selection criteria along with LDB standard selection screen

Hi
While creating a HR report, along with the standard selection screen, if the cusomer requires some more fields to be added, How to retrive the data from the DB?
Is it the way to retrive the data based on Standard selection criteria from the LDB and then filter it based on user criteria or any other way?
Please help me out in this regard.
Thank you.

Yes thats the way. You get the data based on Selection screen of LDB (You can select Report Catogory you wish to) once you get data, You can put CHECK statement to see the data against PXXXX type to the filter value from you custom field on selection screen.

How to disable a standard selection screen of LDB?

Hi Friends,
My requirement is to disable a standard selection screen of a standard LDB and use my own Selection screen instead.How to go about it?.
Prompt replies would be rewarded.
Regards,
Tamilarasan.

Hi Tamilarasan,
U can hide LDB field, in the following way.
1.In tables statement remove the table name for the fields
you done require.
2.You can modify the screen fields. LOOP AT SCREEN
3.In the program attributes you can choose the SAP defined
selection screen if provided.
Add can add new field, in the following way,
1.If it is Customer program then as normal way like
SELECTION-SCREEN: BEGIN OF BLOCK 1
SELECT-OPTIONS:
SELECTION-SCREEN END OF BLOCK 1.
2. Goto SE36 and modify the selection views by creating 'CUS'.
All LBD will not have dynamic selection. If you want you can copy to Z* version and add the following statement to have dynamic selction
"SELECTION-SCREEN DYNAMIC SELECTIONS FOR TABLE" XXXX
Regards,
Prabhu Rajesh.

LDB FMF + supress standard selection screen

Hi,
I had developped a specific report using the LDB FMF, but i want to supress the standard selection screen.
i want to use my only own specific selection screen.
How to do that ?
Best regards

Find the link below:
[http://help.sap.com/saphelp_46c/helpdata/en/9f/db9bed35c111d1829f0000e829fbfe/frameset.htm]

PCH ldb - hiding fields on standard selection screen

Hi,
I am using PCH ldb in my report. The standard selection screen which appears initially, does not show us the "object selection period" fields directly (it is hidden initially). It is displayed only after the "other period" button is clicked.
The requirement is that the "object selection period" fields should be displayed directly without requiring the user to click on the "other period" button.
When using PNP ldb, it is possible to create a report category and hence this can be achieved in PNP. But i am unable to find any solution for the same in PCH ldb.
Does anyone have some idea about implementing the same.

Hi Vikram,
There are no report categories for PCH.
If you enter some values in the dynpro variables it will jump there automatically.
REPORT zmf_pch.
TABLES: objec.
INITIALIZATION.
pchobeg = sy-datum.
pchoend = sy-datum.
GET objec.
Regards,
Michael

Button in standard selection screen...

hello All,
I am using PNP logical database and i have modified the standard selection screen for PNP.
But now there is a button that appears , although the rest is supressed as i wanted it to.
Our forums active contrubutor suresh datti has provided me a solution before to go to sytem then status and then click screen 100 then invisible the push button and activate and re-execute the program. The method seems to work fine. But surprisingly after some time the button appears again..
any idea..??
thanks,
Reena..

then try to remove the button from there.

How to change standard selection-screen fields

hi i am kishore.
i have requirement.
i have to change selection-screen label purchase order to purchase docuement in request for quatation.
pls suggest that how to change the standard selection screen field labels.

Hi.
This is possible.
Just try out this way.Heres is an example.
TABLES: pernr.
data: i_tab type standard table of RSSELTEXTS with header line.
initialization.
i_tab-name = 'PNPPERNR'.
i_tab-kind = 'S'.
i_tab-text = 'Employee ID'.
append i_tab.
CALL FUNCTION 'SELECTION_TEXTS_MODIFY'
EXPORTING
    program                           = 'ZESO_TEST'
tables
    seltexts                          = i_tab
EXCEPTIONS
PROGRAM_NOT_FOUND                 = 1
PROGRAM_CANNOT_BE_GENERATED       = 2
OTHERS                            = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Thanks and regards,
Maheshwari.V

Difference between standard selection screen and selection screen

hi guyz,
im asking this because in the table D010SINF there are two fields sdate and idate which has different dates in it for some programs and same dates for some..bit confused:(
thanks

hi BrightSide
standard Selection means
suppose if you are using parameters means system defaultly generate one screen under the Screen Number 1000
Selection Screen means you are creating a screen using
stament SElection-Screen begin of screen 100..
this is the difference whatever the screen other than '1000' is selection Screen, where as 1000 is Standard Selection Screen
Regards
Deva

Changing field label for standard select option

Hi All,
I need to change the label for one of the standard select option for the custom report category.
the field is PNPSTAT1 - original label is - Customer-Specific Status - which i need to change as per customer requirement.
Can anyone tell me the way i can do it so that it can be viewed with correct label not only on the selection screen but in further selections mode as well.
Regards,
Raunak

Dear Raunak,
If you have standard select option for standard selection screen:
create a implicit enhancement for any standard program and wrote the below code at the end of the program and it is working..
INITIALIZATION.
%_s_PNPSTAT1%_app_%-text = 'ANY LABEL'.
If you have custom report select option, go to above Ravikiran's procedure.
Best of luck.
Regards,
Abbas.

Skip standard select method in search help exit

Hi experts,
how to skip standard select method in search help exit? Currently I'm selecting my custom data with select statement in 'DISP' section, but still text: 'more than 500 results were found' is shown. I just want to skip/disable standard selection. Thank you.
BR
Paul

Hi check my weblog: https://wiki.sdn.sap.com/wiki/x/du0

Sample program to remove standard selection-options & replace user defined.

The standard selection-options are provided for the logical database. i need to supress the standard selection-options and include my own selection-options. I neeed a sample program how to do it.

Is this your custom program where you assigned the LDB in the attributes?
If so, you can do this in your AT SELECTION-SCREEN OUTPUT event.
LOOP AT SCREEN.
IF SCREEN-NAME = <LDB SELECTION-SCREEN FIELDNAME>.
SCREEN-ACTIVE = 0.
ENDIF.
ENDLOOP.
If your LDB selection parameters have a MODIF ID xyz option addition, then instead of the above SCREEN-NAME, you can replace it with SCREEN-GROUP1 and do the same thing.
Srinivas

Standard selection

Similar Messages

Maybe you are looking for