Standard Status bar

Hi guys,
There are four field in the standard Status Bar :
The first status field displays the system ID and the client number.
The second status field displays the server to which you are connected.
The third status field specifies your data entry mode.
The fourth is empty.
Is there a way to custom this four fields ? For example to remplace the server name by the compagny name which is clearly for users or to put a icon (green, yellow, red) to see immediatly in which system we are (dev,qua,prod).
thanks.
Jerome.

To my knowledge, this can not be modified easily. Of course anything can be modified, but how deep to you want to go? You can see that this information, is a part of the SAPgui itself, hence you would probably have to do a lot of hacking at the SAPgui level, which I doubt that you want to go into.
Regards,
Rich Heilman

Similar Messages

IPod Touch Graphics Weirdness - Status Bar mirrored at bottom of screen!!!

Okay, this is VERY weird and I have no idea what's going on - This morning when I woke up, I grabbed my trusty iPod Touch (4th Gen, 32GB with iOS 5) to check my calendar and noticed that the Status Bar (if I'm calling it the right thing - the white bar at the very top of the screen that shows the time, battery charge, WiFi signal,etc) was not only at the top - but also at the BOTTOM of the screen too!
The mirrored Status Bar has the correct time and battery life as the top and the time updates just as it should. I can also see the lock icon when I first turn it on. However, to the extreme left the bottom bar is sort of "washed out" and is so white that I can't make out the word "iPod" that shows on the top bar. In fact, it's also sort of translucent as I can see the dock, icon name and part of my wallpaper behind/thru it! I also just realized something else weird - if I pull down the Notifications panel, I can see the notification panel sort of "scrolling" thru the bottom Status Bar!!! I hope I'm explaining this well enough - but it's like..I dunno, like the ideo memory for the top of the screen is being mirrored over the bottom of the screen too - I can see what should be there as well, it;s like it's overlayed or something. The Notification panel is especially weird since it totally obsured the top status bar as it's being pulled down - and this is exactly what the bottom status bar area shows me - what's in the section in the top bar is prescisely what is showing in the bottom bar section!!!!
It stays displayed along the bottom no matter what app I'm in, even a full screen video, game, lock screen, etc; nor does it disappear when rotating to landscape mode - it still stays in the exact same place (tho in landscape it's now on the right side as it were). I have soft reset, synched, etc but it wil not go away. As I said, I deleted all recently installed packages, but I didn't install anything the night before (remember I just found it this way this morning) - i.e. I wasn't doing anything weird or experimental or anything remotely like that with my beloved little iPod (never JailBroken it or any of that stuff - am happy as it is and never been tempted to do anything like that to it). I also have never used any of the AV Out cables or whatever they are called that allow you to mirror an iPod screen on a TV or monitor or whatever - never used anything but the sync cable (now at my sisters), my Belkin charge auto charge cable, and that's it (I'm mentioning all this since I see other people asking this sort of thing for other problems when I was trying to find anyone else experiencing/ed this issue).
I have not tried a factory restore yet, and wanted to post here before I go that route to see if this is maybe something Apple has seen before and can offer a quick and easy fix. Otherwise I'm guessing a hard/factory reset is the only way to go - I'm a bit worried about this since (of course) my sync cable is no longer here - gave it to my sister the last time she was in town and have just been using my charge cable (no sync capabilities, just power) since I don't really need it with iOS5's wonderful WiFi Sync. I do use iCloud - but if I hard reset/factory reset, will iCloud restore the synching info so I can sync all my apps and music & videos back via iTunes from my Laptop, or will I need to buy another sync cable? IF factory reset is the only way, please let me know (anyone that knows!) what I'm in for in regards to restoring from iCloud if anyone here is experienced with that. I know my non-iTunes music and videos are not backed up in the Cloud, but as long as it restores the ability to sync wirelessly with iTunes on my Laptop that's fine. Asuming, of course, that a factory reset will even fix this Status Bar oddity - I'm really afraid it means my little iPod's internal board is going fry-happy or something awful like that. :-(
I tried taking some screen snapshots (home + power off) to post, however the camera roll just displays a standard beautiful looking screen, no double bar - not sure what that indicates. However after some fiddling and emailng to myself, I do have a couple pics posted below. I apologize for the lack of quality - I took them - and don't laugh - with my Android Phone (yes, I have every intention of upgrading to an iPhone 4S as soon as I can - having a bit of enforced financial conservatism going on at the present unfortunately - which is one of the main reasons I'm so worried my beloved iPod Touch 4 is having issues as it's either very close to warranty expriration and can't afford another right now, and really don't want to have to rely on my Android Phone for everything I do on my iPod Touch - there truly is no comparison!).
If anyone has any ideas or has seen something similar please let me know! I did search the Apple forums prior to posting this, and even googled the web but could find nothing like this ever happening to anyone else. I absolutely love my iPod Touch and would be uterly lost without it, so I'm hoping with all my might that this isn't some sign of a bad board or something in my beloved little beautiful iPod Touch!
Thanks in advance for any assistance, suggestions, etc!!!
NewtonDKC
Message was edited by: NewtonDKC (embarrassing spelling errors corrected and a couple additional discoveries added!) :-)

I understand the various methods - I was just worried because I've never restored via iCloud - from the limited experience I've had thus far, I'm impressed! But of course if Apple does it, it's going to be the best experience possible! :-)
And as you may have guessed from my now having iCloud restore experience, it is due to me going ahead and trying a reset to factory settings/wiping it clean. And unfortunately - the bottom bar is STILL THERE! <much argghhing! and %^$#@*&^%$'ing loudly>
I did try wiping it a couple of times, but no joy. At this point, I'm guessing this means there's something majorly wrong with the graphics subsystem and/or main board? It's not a screen issue as it's working fine - in fact it's working double-time displaying two things at once - dimensional transcendentalists take note! <grin>
So unless anyone else has some fantastically bright ideas, I'm guessing this means I need to call Apple next? I'm guessing one of these pages has the appropriate contact info - I'm just not at all looking forward to being without my favorite gadget in the history of gadgetdom (and as you can tell from my username, I've been a fan of Apple Gadgets for quite awhile now!).
Anyone know if Apple offers any advanced replacement options? Or if there's anyway to tell if my Touch is stil under warranty? I can't remember the exact purchase date but probably coming up very soon - have they been out a year? Sorry if thee questions are silly, as I said, I'm a newbie to Apple Support - first Apple product I've ever owned that broke!
Thanks for any info for anyone coming in late to the fun, and/or for any tips on who/what to call and ask about.
Wish me luck! :-0
Newt

DROID RAZR issues with status bar - Winamp

When i pull the status bar all the way down it is really hard to get it to stay locked. It just keeps flying back up to its normal position. Winamp is also borked

If your Having Issue Linking too Winamp an other Stuff with it you might Give this A Look an see if can Help Ya:
You need to install both the Winamp for Android and the latest Winamp Media Player for your PC.
Step 1::
On your Android device, download Winamp for Android.
Step 2:
When you initially launch the application you'll see a "Winamp Help" screen. Click on the "Wi-Fi Sync" button and following the onscreen instructions. If you don't see the Winamp Help screen, simply launch Winamp and from the Home screen press the Menu button (hard button), go to "Settings" and "Enable wireless sync".
Step 3:
Make sure your PC and Android phone are on the same Wi-Fi network.
Step 4:
From your PC, download & install Winamp Standard (free) or Winamp Pro (premium). Version 5.6 or later is required. Please note that Wi-Fi sync with Winamp for Android will not work with "Winamp Lite". After launching Winamp you will be prompted to "Add Media to Library" or "Import from iTunes".
Step 5:
From the Media Library tab, select "Devices" in the navigation panel (left-hand side of screen).
Step 6:
Your Android device should now be visible in the "Discovered" area of the "Devices" view. If not, click the "Discover" button. You'll also want to be sure that your device is not in sleep mode.
The "Discovered" view only indicates available devices. To sync with your device, you will first have to attach it.
Step 7:
To attach a device, double click on your device icon (or single click on the attach overlay button). This will send a pairing notification to your device.
Step 8:
After clicking "Attach", a notification will be sent from the Winamp Media Player to your Android device asking you if you would like to allow Wi-Fi pairing. Click allow.
Step 9:
Once you have selected "Allow", you should now see your device in the "Attached" area of the "Devices" view. Additionally, you will see your device name appear under the "Devices" node in navigation panel.
(Note: You only have to pair your phone once. After initial pairing, your device should automatically appear in the attached state. You may be prompted to pair again after upgrading to a newer version of Winamp for Android).
At this point your Wi-Fi set-up is complete and you are ready for wireless syncing.
Step 10:
Once your device is "Attached", mouse over the device icon and click on the "Sync" overlay button. Alternatively, you can manually drag and drop files in your "Audio" library to your device (pictured below).
You also have the option of setting up your Preferences by right-clicking on your device or by going to Options >> Preferences >> Portables >> [Device Name]. Learn more about sync preferences and settings.

Standard menu bar and title bar

Hi to all
I am developing a module pool program in which I have defined set pf status in PBO event.
But while running the program that standard tool bar not working.
Plz guide me....
Thanks & Regards
Anubhav

hi anubhav gupta,
PBO---
        after defining set pf status in PBO event,double click on the name of the status u have given.
   u will enter into the new screen which consists of menu bar
                                                                           application tool bar
                                                                           function keys.
open the function keys,u will have the options there,for example write exit on one of the icon and double click on that,function attributes window will open,and give thefunction code as 'exit',function type as 'E',
PAI----
    crate a PAI module,in that write the following code
MODULE cancel_0102 INPUT.
CLEAR ok_code.
ok_code = sy-ucomm.
CASE ok_code.
    WHEN 'BACK' OR 'CANCEL'.
      SET SCREEN 100.
      LEAVE SCREEN.
    WHEN 'EXIT'.
      LEAVE PROGRAM.
ENDCASE.
ENDMODULE.                 " cancel_0102 INPUt
i think this solves ur problem.

OS X does not boot, a status bar is displayed

The system starts booting and the standard grey screen appears. In addition, a status bar is displayed below the spinning circle. It disappears after going to 100%, but nothing changes. The system hangs at the grey screen.
I have recently installed Windows with a trial of MacDrive. I have not used my OS X for a couple of days.
I had installed and then disabled Mac FUSE, however there might have been a couple successful boot sequences afterwards.
I tried starting system from a Mac OS Install DVD. Disk utility found errors and failed to repair them. I could format the drive, but this is terribly time consuming....

Thank you for the contribution. Sadly, the cmd + v did not work- I tried a couple of times without any result.
I have decided to reinstall the OS after all attempts to repair the disk failed. However, it is not that simple. The partition does not show up at the "Where do you want to install Mac OS X to" menu. Furthermore, erase fails as well- the Disk Utility appears to be unable to mount the disk. The bar is basically stuck at approx 3/4 for 15 minutes now....
Restarting and retrying failed.

Standard tool bar for custom Dialog program

Hi,
I need to have a standard tool bar functionality like (Search & Print) for my screen 9000. Could you please let me know how can i get it. And i have a ALV in that screen, if i print the data will all the lines will be printed or only displayed lines will be printed, could you please let me know how to get all the lines of ALV. Basically i have some fields & ALV... everything should be printed out.
Thanks

my question is when you create a custom screen like 9000, pf-status also need to created. If i need to printing functionality what needs to be done. If i need all the standard functions in my custom screen...what i need to do.
In that custom screen i have normal fields and one ALV. if i have print button in the standard tool bar and if i use it will it print all the lines of alv along with other fields. {please note that i am not talking about the alv print icon, i am talking about that standard tool bar print icon}.
Thanks

Deactivate the status bar message ?

Hi,
I want to Deactivate the Status bar message "Budget check.." which is coming while executing the BAPI BAPI_NETWORK_MAINTAIN in Tcode SE37. The output is correct but I just want to deactivate the standard messsge.
Regards,
deepthi.

We get this Error in FM CO_ZF_PROJECT_BUDGET_CHECK in perform PERFORM send_gui(saplcozf) USING text-bck.
I was unable to deactivate this Message.

Using the Default standard Tool-bar with a new screen.

I created a screen with a table put would like the gui-status of the screen to be the same as that of a normal selection screen with all the functions. Is this possible and how do i go about it. Please help

hi ,
you can see the gui status of the any standard tool bar and copy the sane ..
but you need to add custom code in you zprogram for their functionality..
prabhudas

Wifi status bar says No service

Hello there,
I have a wireless connection at home that works fine with both my imac and my laptop. I'm trying to use the same wifi connection for my ipad- however ever since i got the ipad it's not able to recognize any wifi sygnal. There is "no service" on the status bar (top left corner) at all times. I tried reseting network settings already. I bought the ipad in the U.S. and brought it back to UK. Does that have anything to do with it ? Please advise.

Wi-fi is uses a universal standard and is the same for all devices regardless of country of origin.
I take you have turned the wi-fi on in Settings -> Wi-Fi and let the iPad scan for available connections. Then chosen your home network. When you do this what happens ? Does it ask for a key/password ?

Check status bar message type

Hi All,
Are there any function module or method that could use to check what message type (I,S etc) are prompting on the status bar?
Thanks.

Hi,
If i understand you requirement correctly, you have made some customization to a standard program's PBO/PAI. This customization updates some Z Tables. Now the flow is such that your customization executes before Standard program has completed its validations and there is a possibility that an error might be thrown later in the program validation and in such cases you do not want your changes to be committed to the Z tables.
If my understanding is correct, i can think of below solutions.
1) Since you are customizing the standard code, look for a EXIT/BADI which get triggered on SAVE and add your code here.
If you have tried this already and didn't find a suitable enhancement, then try with the below solution.
Create an FM with the processing type as an "Update Module" (attribute tab of the FM in SE37), and pass the data that needs updated in the Z table to this FM, inside this FM you can have your custom validations and code to update the Z table.
Now call this FM "CALL "FM" IN UPDATE TASK" in the PBO/PAI of your customization.
With this what you will achieve is that, the update modules will be called only if the original transaction was committed successfully.
Regards,
Chen
Edited by: Chen K V on Jun 3, 2011 12:59 PM

HT1695 what does hsdpa indicates on the status bar on my IPhone 4s?

what does hsdpa indicates on the status bar on my IPhone 4s?

It's a type of cellular network that is supported by the iPhone.
High-Speed Downlink Packet Access (HSDPA) is an enhanced 3G (third generation) mobile telephony communications protocol in the High-Speed Packet Access (HSPA) family, also dubbed 3.5G, 3G+ or turbo 3G, which allows networks based on Universal Mobile Telecommunications System (UMTS) to have higher data transfer speeds and capacity. Current HSDPA deployments support down-link speeds of up to 42 Mbit/s. Further speed increases are available with HSPA+, which provides speeds of up to 337 Mbit/s with Release 11 of the 3GPP standards.[1]
(from Wikipedia - http://en.wikipedia.org/wiki/High-Speed_Downlink_Packet_Access)

How can I customize my status bar to change the color?

Hello:
How can I customize my status bar to change the color?
Thanks

On which phone model? Either way, modifying the notification bar text color usually isn't something you can do with a standard stock phone.

Creating button in standard tool bar

Hi gurus,
I hve to create button in standard tool bar along with the existing icons and buttons, plz help
how to suppres the fields other than screen table methods?
reward asure
with regards,
thambe

hi,
if u using ALV then go to SE41.
Give SAPLKKBL as program name and STANDARD_FULLSCREEN as status....
now click on Copy Status and in that give ur program and status name into To.....
now in REUSE_ALV_GRID_DISPLAY
FORM display_list.
g_f_repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_callback_program       = g_f_repid
      i_callback_user_command = 'USER_COMMAND'
      i_callback_pf_status_set = 'SET_STAT'
      it_fieldcat              = g_t_fieldcat[]
      it_events                = g_t_events[]
    TABLES
      t_outtab                 = g_t_itab
    EXCEPTIONS
      program_error            = 1
      OTHERS                   = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " display_list
FORM set_stat USING rt_extab TYPE slis_t_extab.
SET PF-STATUS 'ZSTAT' EXCLUDING rt_extab.
ENDFORM.                    "set_stat
here my status name is ZSTAT which i gave in SE41...
and in user_command form...
FORM user_command USING u_comm LIKE sy-ucomm selfield TYPE slis_selfield.
CASE u_comm.
    WHEN 'DET'.
    ........ur logic.........
ENDCASE.
ENDFORM.                    "user_command
reward if usefull...

How to add a standard tool bar in alv

H i
i am developing a custom report in Alv interactive report for to dispaly MRP information.
Can you sejjest me how to add a standard tool bar in alv.
i displayed one final alv grid display there i have to add standard tool bar and application tool bar.
Thanks,
Rams
Edited by: Ramsoft on Oct 27, 2010 12:09 PM

Hi,
Give the PF ststus name in the PF status parameter of ALV FM
I_CALLBACK_PF_STATUS_SET = ' PF_STATUS'. " this parameter of ALV FM
FORM pf_status USING pt_extab TYPE slis_t_extab.
SET PF-STATUS 'MAIN' .
ENDFORM. "pf_status
Then create a main PF status by double clicking on it , after this goto EXTRA in menu
EXTRA>ADJUST TEMPLATE> then give program - SAPLSLVC and status - STANDARD this will give u standard toolbar of ALV ,
THen add what ever button you require in application toolbar
Regards,
Madhukar Shetty

How standard tool bar will work ?

Hi,
In my Customize dialog program, How Can I use the standard Tool bar......
Can anybody suggest me...
Thanks
kumar

Hi,
Inside the module in the PBO the following statement will be there by default.
module status_9000 output.
*set pf-status 'STATUS'. set titlebar 'Budget Material Values'*.
endmodule. " STATUS_9000 OUTPUT
You need to enable each of the standard tool bar options available for the user by writing Function code and utilizing the corresponding ICON by using the assigned Functioncode to handle the subsequent process after clicking the ICON.
Regards,
Murthy.

Standard Status bar

Similar Messages

Maybe you are looking for