Standard table data lost during adjustment

Dear experts,
Greetings.,
I was trying to make changes in a domain of an append structure of a standard table and while adjusting the table..i lost the data from the table (which was standard table). Any suggestion how to retrive it back?
Please help
Regards
Sathya

Hi,
Just check with your BASIS team if there is any backup. Usually they take the backup in production server. In dev and test they don't take unless it is required. If there is no backup, i dont think you can get back the data as table adjustment happens at database level and not at data dictionary level.
Thanks,
Vinod.

Similar Messages

Recovering data lost during change of unit of time for Info structure S061.

Dear Sir,
I have changed the period unit from 'month' to 'week' through SPRO>Logistic Data Warehouse>Activate update.
Due to this the data of Info Structure S061 is lost and when MCI3 transaction is executed the message " No Data found"
message is shown.
Kindly guide me how to get back the past data in MCI3.
Thanks and Regards,
R N Sabat.
Edited by: rnsabat on May 25, 2011 11:01 AM

Hi,
A update period of day/week will not work for S061. Any structure with costs must be set to month or posting period. See note [180047|https://service.sap.com/sap/support/notes/180047].
If you want to make cost evaluations in the information system, only use the period unit 'month' or the posting period.
Once you adjust the customizing it will be necessary to rebuild the info-structure S061 with OLPM transaction. This works on the basis that a temporary version is created e.g. &(1
This temporary version must then be copied to the live version 000 using transaction OLIX.
-Paul

Retrieve deleted standard table data

HI,
I was debugging the transaction F110 for analysing a certain requirement and changed some data in debugging mode. Somehow program SAPF110R was triggered which deleted the table content of the following tables:
reguv
reguh
regup
regus
reguc
reguhh
regupo
regua
rfdt
If anybody has encountered such a situation before, please help me in retrieving the data.

Your only hope is for a system backup.
You could have the system backed up to another bit of hardware, and checkout the difference between the tables in the backup and the current status.

Inserting standard table data using ztable

Hi all,
           I have an issue like i have created "ztable" where i am taking few of the mara table fields.
but my problem is i m not getting data into these fields , so can anyone tell me wht shuld be done to get the data into my ztable which will contain all these fields.
<code>
tables : mara.
data : begin of itab occurs 0,
       matnr like mara-matnr,
       ersda like mara-ersda,
       ernam like mara-ernam,
       vpsta like mara-vpsta,
       mtart like mara-mtart,
       mbrsh like mara-mbrsh,
       matkl like mara-matkl,
       meins like mara-meins,
       end of itab.
data : wa like line of itab.
select matnr ersda ernam vpsta mtart mbrsh matkl meins from mara into corresponding fields of table itab .
what should be done , shuld i use INSERT INTO "ZTABLE FROM ITAB.
PLZZ SUGGEST.
Thanks,
karan

navneet its working now but ztable_12 where i am inserting data its not getting any data why?
below is my code.
<code>
tables : mara.
data : begin of itab occurs 0,
       matnr like mara-matnr,
       ersda like mara-ersda,
       ernam like mara-ernam,
       vpsta like mara-vpsta,
       mtart like mara-mtart,
       mbrsh like mara-mbrsh,
       matkl like mara-matkl,
       meins like mara-meins,
       end of itab.
data : wa like line of itab.
select matnr ersda ernam vpsta mtart mbrsh matkl meins from mara into corresponding fields of table itab .
append itab.
INSERT ztable_12 from table itab.
</code>
thnks karan

IPhone data lost during update using friend's pc.

Hello
My g/f has an iPhone 3G which she has used a lot for 18 months and had lots of saved texts and photo’s etc, but she is not very good at backups and has lost everything when upgrading from the original software, (about 2.6) to the current 4 something. Very unfortunately and unwisely, this was not even done on her own computer, but on a friend’s.
She has her own desktop pc and uses iTunes but hardly ever connects the phone and always declines to update when she does connect. She last connected about 6 months ago.
On New Years Eve we were at a friend’s house and a knowledgeable sounding guest offered to update her phone on her friend’s computer. They have their own iTunes account on it.
We connected the phone up and it started updating via the iTunes program and after one or two hours the software and firmware update completed. The sync options were then presented and as the knowledgeable person had by then gone home we thought “Well, we don’t want to sync with anything on this computer, we will disconnect and sync later on g/f’s home computer.” (We are still not quite sure what syncing is although g/f thinks she has synced before from home)
As you have guessed, the software upgraded fine but phone has been wiped of all data, pics, iTunes downloaded, texts, contacts, notes, calendars.
The obvious problem in this case is that we used someone else’s pc. I have located the mobilesync backup folder on g/f’s own pc and it is empty.
Is there any hope that we can retrieve anything from our friend’s pc which we updated on? Would a folder have been created separately on their pc for my g/f’s phone?
I was not watching the pc the whole time it was updating and did not see everything that happened, but what I have established is that when I plugged her phone to her pc yesterday I got the warning message saying that the phone has been synced to another computer, (presumably the friend’s) and all data on the phone will be erased if I sync on this one (her one).
What I don’t know is whether this warning message had come up on New Years Eve on the friend’s computer while updating, and whether it was ignored.
We have been back to our friends but they are getting a bit fed up with us, I think they will put up with us using their pc one more time so this time we will have to know what we are doing. I have an external HD so I could maybe copy the iTune files from their pc and work on them from home later?
With thanks

Well.... I guess based on the replies, I should consider that password manager info not being part of the backup is normal for all of us.
If not, maybe it's just one of these numerous glitches and bugs I have since I own a blackberry.

HT4623 Can I retrieve data lost during update?

Can I retrieve data tha was deleted during an update?

What data?
You should have made sure that everything was on your computer before any update.

Recover data lost during sync

My itouch data is now gone when I tried to sync my recent device downloads to my itunes library. Instead, the sync copied a blank library back to my itouch and wiped out all of my apps, photos and music. Is there any way to recover game files (without replaying everything) and / or the photos? Please help if you can!!

You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
You can get recent photos from PhotoStream if you turned it on.
iCloud: Photo Stream FAQ
If you have an iPod backup you can restore from the backup to get photos (not synced photos) and app data provided that if you restore via iTunes the apps are in the iTunes library .

Can i change or modify or insert the data in standard tables

hi gurus
can i change /modify/insert the data in standard tables
witout using module pools
plz send the progem lines also
it ll be very helpful to me
thank you
kals.

Hi Kalyan,
It is not advisable to update standard tables directly or through your own module pool programs also. The reasons are,
1. It is difficult to find out how many tables are updated through the transaction. if we leave one table also as Mr.Andrew said data integrity will be lost.
2. Authorization objects and profiles will be totally bypassed if data is inserted through custom programs.
3. Complete data validation is not possible. There are certain validations that are executed through code and appropriate errors and warnings are shown in the transactions. If we insert data directly to the tables anything can be inserted into the table field violating all the validations unless we have field level check constraints on the tables at database level.
4. User Exits and BADIs that are implemented for specific business requirements and checks will not function on the data.
5. Update & Transaction locks will not work properly.
Due to above reasons, definitely you should avoid updating standard tables directly.
There are many tools such as LSMW Recordings, BDCs, BAPIs, IDOCs, Upload Interfaces available in SAP through which bulk data can be updated without using relevant transactions.
You can collect data from end users in text or excel sheets or through custom programs in required format and upload at once through above mentioned tools.
Regards,
Hema

Can we insert data directly in standard table

hi
how can we insert data in standard table directly.
pls reply urgently.

Hi sapna yes u can insert data to the SAP tables, as shown below...
use the table mara in the place of m
REPORT ZTEST_INSERT.
TABLES: <m>.
DATA: wa_m TYPE <m>.
wa_m-ernam = 'ZTEST'.
insert into <m> VALUES wa_m.
if sy-subrc = 0.
WRITE / 'Records inserted Successfully'.
ENDIF.
reward if usefull,
Vishnu. R
Edited by: vishnu ramanathan on Sep 18, 2008 2:17 PM

Can we enter data in any standard table directly through custom form??

Dear All,
Can we enter data in any standard table directly through custom form??
I have create custom form in R.12. I want to insert data in quality standard table directly through custom form. Need experts guideline.
Awaiting regards,

Hi,
Can we enter data in any standard table directly through custom form??
I have create custom form in R.12. I want to insert data in quality standard table directly through custom form. Need experts guideline.
Awaiting regards,
I would not recommend touching the standard tables at all unless you are being guided by the SR. For a record to be in the standard table it should go through series of validations based on the what operation you are performing and some times datas are dependent upon the other tables, and also some times the same records are hit to so many other tables simultaneously.
Therefore I would not recommend this brother.
Thanks &
Best Regards,

How to Fetch Data From Standard Table MARA and Display using BOPF ?

Hello All,
In BOPF creation of Quey to a node fetches data from the Data Base Table attached to that Node,
But in my requirement I have to fetch data Present in a Standard table and Display it in the FPM List Using FBI.
** Can we Fetch the data From Standard Table and fill the Node in BOPF, Is this possible as the standard Table do not contain KEY field which BOPF uses for Data Fetching ?
Kindly share your Idea's .
Thanks in Adv.

Hi Dhivya,
Thanks For your Response.
In my Requirement I want to make ROOT Node as Transient Node.
When I create a Sub Node to a Root Node, I am able to get this option to make this sub node as a Transient Node .
By selecting 'Standard<-->Extended' option in the Menu item 'GoTo' I am able to get this Transient Node check box field for the Sub Nodes.
I want to make a ROOT Node as a Transient Node.
(Which Version you are using, and which transaction you are using to create BO . we are using BOBX Transaction, Version Ehp 6 )
Kindly Guide me .
Thanks,
Kranthi Kumar.

Export to excel iview table data of a standard application with out BAPI

Hi All,
I am Editing Standard Application. In that i need to add a button, on clicking that the data present in that iview table to be exported to excel.
The table contains editable & non editable fields. The context attributes are under in different nodes. OADP is used to get all the attribute values of the table.
We have faced problems in identifying OADP attributes. Because of this, we have used seperate BAPI to group all the attributes of the table. By using this BAPI, We are successful in exporting the table data to excel
Could you please provide a solution to export the table data to excel from iview directly with out going to BAPI.
Thanks,

Hi Challa,
We have a similar requirement and are not able to find the node or attributes of the planning table.
Can you let us know how you went about doing this? Which are the nodes or attributes? Any help is appreciated..
Thanks & Regards,
Malita Fernandes

UPLOADING DATA IN A NON STANDARD TABLE

I have a non standard table.I want to upload data in that table using SCAT.So,how Test case can be created for uploading the data in that table?
Edited by: Debasish Behera on Mar 17, 2008 1:02 PM

As it is a Z table yiu can directly uploda data by an ABAP program. Read the data from a flat file and simply insert into that table.

Loading data from SAP BW standard table to master data text

Hi,
Can anyone please tell me the steps to load data from SAP BW standard table to master data text?
How should the data source be created?
Thanks in advance.

Hi aparajith,
Have you loaded the master data attr ?
ECC Steps
then load the attr text
create the ztable using standard table using generic data source using table function.
there you can select the which field you required
check the data in RSA3
BI STEPS: -
check the source system connection.
replicate the data source
create of find the master data object for text (including attr)
map the transformation
run the info package
create the DTP.
check the data in target object.
Thanks,
Phani.

Filling Standard table with Data

Hi All,
how to configure a table for updating with data.
I am working with Migo Movements & I want those movements data to be updated in MARI Table.
Is it Possible to configure the standard table for updating with data?
Thanks & Regards,
Ravi S

Hi,
Thanks for Your Reply.
Actually I'm interested to know how the Migo TCode is configured so that MARI Table gets Updated.AS of Now it is Empty & when ever the Next transactions are done in Migo,the Mari Table Needs to be Updated.
Thanks & Regards,
Ravi S

Standard table data lost during adjustment

Similar Messages

Maybe you are looking for