Standard Table entries missing in E-RECRUIT System

Hi,
We are in the phase of E-Rec implementation. We have installed standalone E-recruit system (NW 7.4)
We did client copy with SAP_CUST profile from 000 to 300, but some of the table were not reflected which we copied again.
We run the report RHTTCP77 for tables t77rcf* and copied client dependent tables from 000 to overcome the issue for the missing tables in 300.
But, still we have an issue with VV_T77SK_RCF as all entries are not updated, what is the way fwd?
Shall we proceed with SAP_CUST or SAP_ALL during client copy if we need above entries?
Can anyone please suggest what way we will follow to overcome the issue of missing tables?
Regards,
Khushboo Sahu

Hi,
Please use SAP_ALL and for step wise instruction please check the below thread -
http://scn.sap.com/thread/121904

Similar Messages

EREC- Standard table entries missing

Hi Experts,
We are in the process of implementing SAP E-recruitment EHP5. System has been set up. We have also activated the following business functions
HCM_ERC_CI_1
HCM_ERC_CI_2
HCM_ERC_CI_3
HCM_ERC_CI_4
HCM_ERC_SES_1
HCM_MSS_ERC_CI_1
HCM_HIRE_INT_CI_1
HCM_ASR_CI_2
But i am not able to find any entries in any of the standard tables(t77rcf*). Say for e.g. i cannot find any standard activities in the table.
Is there anything else that needs to be done, so that all the standard entries are visible.
Do i need to copy all the tables from client 000??
Please guide me in rectifying this issue.
Regards,
Pradeep

Hi,
it depends on the settings for the client copy if customizing entries from client 000 are copied or not.
I general all entries in SAP customizing tables are examples and no "SAP standard". So in all of my projects I start from empty customizing tables for activities as I setup the system according to the customer requirements and do not care much for the SAP examples.
If you really want to have these sap examples as a starting point you can run report rhttcp77 for tables t77rcf* to copy the entries from client 000 to your working client.
kind regards
Roman

Table entries missed

Hi,
Some table entries were missed.
How can we get the details and any solution to get the table entries again?
Regards,
Chandu

Hi,
Are you trying to say that the records got Deleted???
If yes then, the basis team has to restore the SAP system to the point when the table entries were present.
The risk here is the programs and configuration done after that point will get deleted.
Regards,
Vimal.

How to transport standard table entries

Hi All,
I want to transport SAP standard tables records from one server to another server in append mode. It is actually required for upgradation purpose.
Can anybody please guide me in this regards ?
Thanks in advance!!

Hi Reddy,
Thanks for your suggestion! but one problem I don't have the Transport Entries submenu enabled for all the SAP standard tables. Is it table specific ?. Please let me know how to enable this sub menu or is there any other generic method to attach the records of any SAP standard table in a TR.
Thanks!

Standard table entries

hi all
i am having standard table J_1IPART2 . in this table i need to modify values of 4 fields with document number i.e with value of one field i need to modify values of 4 fields which already stored in database. can i have any ways to do it
can i write a simple modify program in se38 to modify the values in database. is it work? pls suggest me.
Kumar

Hi Kumar,
Yes you can write program to update the table directly and modify the entries for the specific document number, however this is not a recommended way as the database may become inconsistent with different entries maintained in different related tables.
So before updating the table entries make sure the values you are updating are maintained in only this table and not anywhere else for the respective document number.
regards.
Vikas
Do reward useful suggestions.

A standard table is missing in ABAP dictionary

We wane to use a standard program which uses a standard table(CCEE/FISISTGRD) .
but when trying to execute this pgm , itrs going into dump..
The error is CCEE/FISISTGRD doesnot exist in ABAP dictionary
Edited by: deepti Gandham on Apr 24, 2009 9:58 AM

Hi,
deepti Gandham,
I check with ECC 6.0 ,but your standard Table not there
List of the table,
/CCEE/FISI_DDVN    Slovenia VAT open period
/CCEE/FISI_SET       Seting for print programs
/CCEE/FISIFP_A       Forign Payments - account connection
/CCEE/FISIFP_B       Forign Payments in/out
/CCEE/FISIFP_C       Bank list
/CCEE/FISIFP_HAL   Podatki za HALCOM
/CCEE/FISIKOEF1    Coefficients for revaluation
/CCEE/FISIMT940     Bank statement - MT 940 - convert referenc
/CCEE/FISIOBR1      Povezava kupca z letno obr. mero za izraèu
/CCEE/FISISTGRD   Reasons for Reversal enabling to change ta
/CCEE/FISITAX        Convert Tax on sales
/CCEE/FISIZDV
Regards,
Ansari.

Table entries missing in table TJ05

Hi Experts,
I have search in SCN regarding below issue...but i havn't get any solution.
Recently we upgrade to ECC EHP5 from 4.7,
The values "ZIN1" in table "TJ05" is missing in ECC 6.0. This value was available in 4.7 .
How can Z1N1 value insert in the TJ05 table.
above reason the "Non-updation of status in QM notification".(its effecting to Quality module.)
need to be insert values through configuration or through a tcode in SPRO..
i can't use this thru utilities->Table Contents->create entries in se11.
I know that we can forcibly insert values while debugging
if code = 'SHOW'.
set titlebar 'TAB'
elseif code = 'EDIT'.
Please provide valuble suggestion.
Thanks and Regards,
Syfulla

- Check also if records are missing in table TJ03.
- The code start with a "Z" and should have been added by your company/customer (*), so may have been erased by the upgrade (you know/remember the warning message like "Do not make any changes (SAP entry)" ignored by press ENTER
Look at BS* transactions like BS12/BS13 or BS22/BS23.
Regards,
Raymond
(*) Not found on a 4.6c, a 4.70 and an Ecc6 Ehp4 systems..)

Standard Table entry after EA-FIN activation

Hi All
after the activation of the business function EA-FIN (mandatory for the RE-FX) my guess was that the system should automatically insert the standard entry on customizing table.
In my case it doesn't happen.
How can I resolve this problem?
TIA
Sarah
Edited by: Sarah Soldi on Sep 24, 2009 10:44 AM

Hi Sarah,
sample customizing entries are only delivered in the delivery client. This is usually client 000. You have to transport them manually in your customizing client.
There are two ways:
1. login to client 000 and go through the customizing views of RE-FX and put the entries in a transport request
2. login to customihzing client and go through the cusotmizing of RE-FX and compare it with client 000. There is a compare function in the customizing views: Utilities -> choose connection with client 000 -> mark the entries and copy them in your customizing client.
I would recommend you the second way because you can adjust the customizing during copying it AND the adjusted data will be automatically saved in a transport request.
Regards,
Franz

2011 New Form 941 Table entries missing

Greetings,
We have implemented note 1568184 but the new functionality appears in the existing 941 form. The note says: new forms are being released in the standard system - "The Form 941 Federal and Form 941-PR PDF layouts are being released in this Note, by means of the new forms HR_F_941_11 and HR_F941PR_11 respectively (available for release SAP ERP 6.0 and above). We are on 6.04 and the new entries are not in the tables V_T5UX7 or V_T51T5 as indicated in the note.
Has anyone else had this problem? Or have input as to why the new forms are not listed in the tables as specified after applying the SYST and ZIP files?
Thank you for your assistance.

Great article. Thanks for the info, you made it easy to understand. BTW, if anyone needs to fill out IRS Form 941, I found a blank form here Fillable Online Form 941 (Rev. January 2014) Fax Email Print - PDFfiller. This site also has some tutorials on how to fill it out and a few related forms that you might find useful.

Table entry missing: plz help

Hello friends
While doing migo in subcontrating scenario, I getting an error msg that :
Check Table 169P : Entry ATTS < company Code > does not exist.
Please help immedietely.
Full reward points
Thanks and regard
Inder

Hi for this error
goto SE11 and enter V_169p then click on display
then again click on contents icon then u wil get the company code list first u search ur comapny code if it exits pls do changes according to ur requirement.
if company code is not there click on chnage button and goto new entries enter ur comapny code as per as requirement.
and save it
then again do the trasaction
reward points if it helps.
thanks&regards
veera.

How to solve this "Prefix number: entry missing for system EC5 client 800"

Hi,
I am workflow learner, I am having theoretical knowledge on it.
Now, I started to practice practically in my IDES server.
I am getting an error message while I am trying to save my standard task with my object type and method and event (which were already created in SWO1).
My error message details.....
Prefix number: entry missing for system EC5 client 800
Message no. 5W023
Diagnosis
Tasks, rules, and workflow definitions require an ID that is unique throughout all systems and clients. In this way, you can ensure that you can transport these objects from one system into another at any time (without restrictions). From a technical point of view, the uniqueness of the ID is ensured by what is known as a "prefix number". You can define a separate prefix number for every system and every client in table T78NR.
System response
If a prefix number is not defined in the client in which you are currently working, it is not possible to maintain (maintenance terminates).
Even I tried to create on entry in the table T78NR, but as that is standard table, I am unable to make an entry.
Hope we have to configure the workflow, I am not having any Basis consultant with me. Can anyone help to cross this problem.
Thanks and Regards,
Surender Batlanki.
Edited by: Surender Batlanki on Oct 15, 2008 2:20 PM

HI Surender and Other SAP Work flow gurus
Surender, u said, that you got the solution.
As honestly speaking i am new to SAP Workflow. Can u please please guide me the instruction and document if any. I am practising in Test Server machine. I will be really happy that if u all GEMS helps me to get out of it.
in Prefix number OOW4, system is asking me to enter, the Prefix number, Interval start, Interval End, and Check Sum.
I entere the same 980 in prefix number, and i dont know what to enter the Interval start and interval end and check sum.
Also there is some msg coming when i tried to manage some values, " NO Intervals can be reserved for this prefix number" - MSg No: 5W179.
Please gurus help me.
Regard
Guru

E-Recruitment and EHS - tables are missing ECC 6.0

Hello All,
We have recently noticed that we have tables missing in our SAP HCM and our EHS(Employe Health and Safety) Development Box. I am attaching the list of tables for review by all. Can someone tell me, please, if they know what these tables are for and if they are part of a note or submodule running off main modules for E-Recruitment and EHS. I checked notes in OSS but cannot find the tables for the EHS or E-RC modules.
We cannot find these tables listed anywhere. We are using ECC 6.0 and the BB installlment was for N. America.
EH&S Tables
CCRCC_CHCK_ON - EHS: Online Checks for Regulation/Scenario/Scenario Category
CCRCC_DET - EHS: Data Determination Modules per Regulation/Scenario
CCRCC_DETDOCTYPE - EHS: Modules for Regulation/Scenario/Scenario Category
CCRCC_EXCHG - EHS: Data Transfer from and to EH&S
CCRCC_FILTER - EHS: Data Filtering
CCRCC_LIMITG - EHS: General Quantity Restriction
CCRCC_LIMITS - EHS: Relative Quantity Restriction
CCRCC_MON - EHS: Monitoring Settings
CCRCC_PERIOD - EHS: Period Definition
CCRCC_SCENTYPE - EHS: Scenario-to-Scenario-Category Assignment
ERECRUIT - PA-ER - E-Recruiting
T77RCF_INCL2FORM - Assignment of Text Element to Smart Form Template
T77RCF_WL - Worklist
T77RCF_WLA_IDXGR - Index Group for Worklists
T77RCF_WL_ACT_P - Action Profile of Worklists
T77RCF_WL_OUT_P - Output Profile
T77RCF_WL_SEL_P - Selection Profile for Worklists
T77RCF_WL_SEL_PV - Values for Selection Profiles in Worklists
Points awarded!!

Hello Brenda,
I cannot speak for the EHS stuff but the tables you mentioned for E-Recruiting are part of the functional enhancements for e-recruiting 600 delivered with e-recruiting servie pack 7.
E-recruiting delivered 2 service packs which implmented new functioons. These were the e-recruiting packs 5 and 7. Futere enhancements will be delivered with the standard EhP (enhancement package) szenario - first of them is EhP3 for e-recruiting awaylable today if i remémber the schedules correctly..
You are probably missing these tables as you do not have installed the packages yet - so check your sp level. I strongly recommend you to upgrade to the newest service pack 11 for e-recruiting especially if you use / plan to use the webdynpro candidate frontend. But also for other implementation szenarios the sps are very urgent.
For the table in detail:
T77RCF_INCL2FORM - is a tablke for the new letter / correspondence change functionality using a dedicated changable text area in the smartform whixh has the advantage towards the old solution that changed correspondence can be printed propperly.
All other tables are part of the so called dashboard functionality.
You can find additional information on these functional enhancements in the software download centered of the sapnet under "Installations and Upgrades" -> "SAP Application Components" -> "SAP ERP" -> "SAP ERP 2005" -> "Documentation".
Best Regards
Roman Weise

I am receiveing error while creating Z table: Entry in table TAORA missing

Hi Experts,
I am receiving "Entry in table TAORA missing" while creating Z table.
Please help
Edited by: N_niki on Jun 11, 2011 9:22 AM

Hi
1) Check for the DB System. The Table name in "Entry in table TAORA missing", meant to save the "DATA CLASS of the ORACLE application"., OR
2) check for the Data Class you Selected, on Creation of the Z Table, for which an Entry exists in the TAORA or the Available DATA CLASS in the TAORA Table to fix it.
Regards
Gopu

Lock entries standard table

Hi Experts,
Please help in finding which SAP Standard table can we find the lock entries(SM12 transaction).
Thanks!

Prerequisites
You have generated the demo data for the SQL Tutorial.
Log on to the database instance DEMODB as user MONA.
Examples
You can use the system table LOCKS to determine the following database information, among other things:
●     All locks that are currently held on table ROOM
SELECT lockmode, lockstate, rowidlength, rowidhex, rowid
FROM DOMAIN.LOCKS
    WHERE tablename = 'ROOM'
●     All locks that the current user holds in that database session on table ROOM
SELECT lockmode, lockstate, rowidlength, rowidhex, rowid
FROM DOMAIN.LOCKS, SYSINFO.SESSIONS
    WHERE tablename = 'ROOM'
      AND locks.session = sessions.sessionid
●     All locks that are currently held on the table with the hexadecimal internal identification 000000000000035D
SELECT lockmode, lockstate, rowidlength, rowidhex, rowid
FROM DOMAIN.LOCKS
    WHERE tableid = X'000000000000035D'
If the current user is the database administrator (DBA user) or the database system administrator (SYSDBA user), then all currently held locks are shown.
Users that belong to other user classes only see the locks held by that one user.
Definition
The system table LOCKS describes the current lock entries and entries for lock requests.
Structure
LOCKS
SESSION
FIXED(10)
ID of the database session
TRANSCOUNT
CHAR(20)
Transaction identification in the database session
PROCESS
FIXED(10)
Process identification in the database instance
USERNAME
CHAR(32)
Name of the user
DATE
DATE(10)
Creation date of the lock
TIME
TIME(8)
Creation time of the lock
TERMID
CHAR(18)
User terminal identification
LASTWRITE
CHAR(10)
Elapsed time since the last SQL statement for data manipulation
LOCKMODE
CHAR(14)
Type of lock (NULL value | SHARE | EXCLUSIVE)
LOCKSTATE
CHAR(10)
Status of lock
APPLPROCESS
FIXED(10)
Process identification on the client hardware
APPLNODE
CHAR(64)
Client hardware identification
SCHEMANAME
CHAR(32)
Name of the schema of the table
OWNER
CHAR(32)
Name of the owner of the table
TABLENAME
CHAR(32)
Name of the table
TABLEID
CHAR(8) BYTE
ID of the table
ROWIDLENGTH
FIXED(4)
Length of the key of the locked row
ROWIDHEX
CHAR(64) BYTE
Start of the key of the locked row in hexadecimal notation
ROWID
CHAR(128)
Start of the key of the locked row
http://dev.mysql.com/doc/maxdb/en/c4/812640632cec01e10000000a155106/content.htm

Error: Prefix number: entry missing for system REP client 113 Msg no 5W023

Hi, we're trying to study Workflow based on the manuals we downloaded online. Upon saving, we encountered the error: Error: Prefix number: entry missing for system REP client 113 Msg no 5W023.
Here's the diagnosis:
Diagnosis
Tasks, rules, and workflow definitions require an ID that is unique throughout all systems and clients. In this way, you can ensure that you can transport these objects from one system into another at any time (without restrictions). From a technical point of view, the uniqueness of the ID is ensured by what is known as a "prefix number". You can define a separate prefix number for every system and every client in table T78NR.
System Response
If a prefix number is not defined in the client in which you are currently working, it is not possible to maintain (maintenance terminates).
Procedure
Maintain table T78NR in Customizing, and create an entry for the system in question and the current client.
Hope somebody can help me understand what this is.. thanks so much and appreciate your help..
Thanks,
Angela Paula

Hi Angela,
Please check if the Prefix number is maintained in SWU3 t-code.
Go to Maintain Definition Environment -> Maintain Prefix Numbers and check if the prefix number is maintained.
Hope this helps!
Regards,
Saumya

Standard Table entries missing in E-RECRUIT System

Similar Messages

Maybe you are looking for