Standard Table entry after EA-FIN activation

Hi All
after the activation of the business function EA-FIN (mandatory for the RE-FX) my guess was that the system should automatically insert the standard entry on customizing table.
In my case it doesn't happen.
How can I resolve this problem?
TIA
Sarah
Edited by: Sarah Soldi on Sep 24, 2009 10:44 AM

Hi Sarah,
sample customizing entries are only delivered in the delivery client. This is usually client 000. You have to transport them manually in your customizing client.
There are two ways:
1. login to client 000 and go through the customizing views of RE-FX and put the entries in a transport request
2. login to customihzing client and go through the cusotmizing of RE-FX and compare it with client 000. There is a compare function in the customizing views: Utilities -> choose connection with client 000 -> mark the entries and copy them in your customizing client.
I would recommend you the second way because you can adjust the customizing during copying it AND the adjusted data will be automatically saved in a transport request.
Regards,
Franz

Similar Messages

EREC- Standard table entries missing

Hi Experts,
We are in the process of implementing SAP E-recruitment EHP5. System has been set up. We have also activated the following business functions
HCM_ERC_CI_1
HCM_ERC_CI_2
HCM_ERC_CI_3
HCM_ERC_CI_4
HCM_ERC_SES_1
HCM_MSS_ERC_CI_1
HCM_HIRE_INT_CI_1
HCM_ASR_CI_2
But i am not able to find any entries in any of the standard tables(t77rcf*). Say for e.g. i cannot find any standard activities in the table.
Is there anything else that needs to be done, so that all the standard entries are visible.
Do i need to copy all the tables from client 000??
Please guide me in rectifying this issue.
Regards,
Pradeep

Hi,
it depends on the settings for the client copy if customizing entries from client 000 are copied or not.
I general all entries in SAP customizing tables are examples and no "SAP standard". So in all of my projects I start from empty customizing tables for activities as I setup the system according to the customer requirements and do not care much for the SAP examples.
If you really want to have these sap examples as a starting point you can run report rhttcp77 for tables t77rcf* to copy the entries from client 000 to your working client.
kind regards
Roman

How to transport standard table entries

Hi All,
I want to transport SAP standard tables records from one server to another server in append mode. It is actually required for upgradation purpose.
Can anybody please guide me in this regards ?
Thanks in advance!!

Hi Reddy,
Thanks for your suggestion! but one problem I don't have the Transport Entries submenu enabled for all the SAP standard tables. Is it table specific ?. Please let me know how to enable this sub menu or is there any other generic method to attach the records of any SAP standard table in a TR.
Thanks!

Standard table entries

hi all
i am having standard table J_1IPART2 . in this table i need to modify values of 4 fields with document number i.e with value of one field i need to modify values of 4 fields which already stored in database. can i have any ways to do it
can i write a simple modify program in se38 to modify the values in database. is it work? pls suggest me.
Kumar

Hi Kumar,
Yes you can write program to update the table directly and modify the entries for the specific document number, however this is not a recommended way as the database may become inconsistent with different entries maintained in different related tables.
So before updating the table entries make sure the values you are updating are maintained in only this table and not anywhere else for the respective document number.
regards.
Vikas
<b>Do reward useful suggestions.</b>

How to see the table entries after creating the tansaction XD01

I creat customer initial screen through Transaction XD01.
After creating customer initial screen how can i see the yable entries.

Hi,
The customer entries are stored in table KNA1.
Regards,
Himanshu

Standard Table entries missing in E-RECRUIT System

Hi,
We are in the phase of E-Rec implementation. We have installed standalone E-recruit system (NW 7.4)
We did client copy with SAP_CUST profile from 000 to 300, but some of the table were not reflected which we copied again.
We run the report RHTTCP77 for tables t77rcf* and copied client dependent tables from 000 to overcome the issue for the missing tables in 300.
But, still we have an issue with VV_T77SK_RCF as all entries are not updated, what is the way fwd?
Shall we proceed with SAP_CUST or SAP_ALL during client copy if we need above entries?
Can anyone please suggest what way we will follow to overcome the issue of missing tables?
Regards,
Khushboo Sahu

Hi,
Please use SAP_ALL and for step wise instruction please check the below thread -
http://scn.sap.com/thread/121904

Unlock custom table entries after user exits using /n

Hello,
I want to lock a record in a custom table at the beginning when users execute a transaction. Users do various activities and save the change then the lock can be released. My issue here is after I lock when the user execute the transaction, if the user does not save or come out using exit keys, for example press /n or just close the session, I need to still unlock the record. Could any one pls suggest what is the best approach. How does sap handles when we use VA02 and just close the session?
Many thanks
Ramesh

Ramesh,
You need to check for the other actions besides save. Perform the same unlock for other action as you currently do for a save.
If SAVE.
unlock.
Else
unlock
endif.
Bruce

Transporting table entries present in standard SAP R/3 table u201CTMCEXCFZu201D.

Hi All,
We have a requirement where in we need to capture a table entry in transport request in R/3.
The table "TMCEXCFZ" is a standard SAP R/3 table.
The" transport entries" option under the "table entry" in menu bar is disabled in our case.
Is there an alternative way to capture the table entries in the transport request?
Thanks for your help in advance.
Thanks and Regards
Arun Ail

Hi Arun
Try to go to object changeability in the table....assign the table in a package.....then try to save this...it should ask for a transport...
Hope this helps
Cheers
Chanda

Triggering event when entries inserted in standard table

Hi Experts,
I've a requirement to trigger an custom event when entries created in table TOA01 table. We can do this for Z-tables by through options available in table maintenance generator screen. But, in my case its standard table, so i cant change the table. And I dont want to use change document objects. Can you please let me know is there any other method to achieve this.
Thanks in Advance,
Siva Sankar.

Have you checked that if there is a standard event triggered when an entry is done to this table? I think that there might be. If an event is triggered, you can for example create a check function module, and trigger your own event from there.
Regards,
Karri

Short dumop in J2I5 (provide duplicate entry in Standard table)

Hello Expert ,
                          We have a problem in T.Code J2I5 ( Excise Register Extraction) input entry is lelect Excise group 20 . and a date   from 04.08.09 onwards. and select the register RG23D . it shows the run time error ( Eg The ABAP/4 Open SQL array insert results in duplicate database record ) . but in the standard Tcode is there possible to provide duplicate entry in Standard table
Thaks & regards
Aditya Kr Tripathi

Runtime Errors         SAPSQL_ARRAY_INSERT_DUPREC
Except.                CX_SY_OPEN_SQL_DB
Date and Time          29.01.2010 10:57:09
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
problem occurs in this code :
   assign I_RG23D_TAB-I_RG23D_TYP to <x_rg23dtyp> casting.
   <x_extrctdata> = <x_rg23dtyp>.
    class CL_ABAP_CONTAINER_UTILITIES definition load.
    call method CL_ABAP_CONTAINER_UTILITIES=>FILL_CONTAINER_C
      EXPORTING
        IM_VALUE               = i_rg23d_tab-i_rg23d_typ
      IMPORTING
        EX_CONTAINER           = i_report_tab-extrctdata
      EXCEPTIONS
        ILLEGAL_PARAMETER_TYPE = 1
        others                 = 2.
   I_REPORT_TAB-EXTRCTDATA = I_RG23D_TAB-I_RG23D_TYP.
    COMPUTE I_REPORT_TAB-EXTRCTLNGT = STRLEN( I_REPORT_TAB-EXTRCTDATA ).
    APPEND I_REPORT_TAB.
ENDLOOP.
IF M_EXTRACTED = 'X'.
    LOOP AT I_RG23D_KEY.
      DELETE
      FROM J_2IEXTRCT
      WHERE BUDAT    = I_RG23D_KEY-BUDAT
      AND   SERIALNO = I_RG23D_KEY-SERIALNO
      AND   REGISTER = I_RG23D_KEY-REGISTER
      AND   EXGRP    = I_RG23D_KEY-EXGRP.
    ENDLOOP.
ENDIF.
Control table check here for data Extraction
INSERT J_2IEXTRCT FROM TABLE I_REPORT_TAB.
If the insertion of the extract table is successfull then the table
for Extraction is Inserted
IF SY-SUBRC EQ 0.
    PERFORM FILL_EXTDT USING C_RG23D M_EXTRACTED.
ENDIF.
ENDFORM.                                                    " RG23D
*&      Form RG23CPART1
Purpose : RG23C Part I extraction logic
FORM RG23CPART1.
DATA: $PART1      TYPE PART1_TYP,
        $LINCNT     LIKE SY-LINCT,
        M_EXTRACTED VALUE '',
        $RC         LIKE SY-SUBRC.
*********************************************************************************************8

Lock entries standard table

Hi Experts,
Please help in finding which SAP Standard table can we find the lock entries(SM12 transaction).
Thanks!

Prerequisites
You have generated the demo data for the SQL Tutorial.
Log on to the database instance DEMODB as user MONA.
Examples
You can use the system table LOCKS to determine the following database information, among other things:
●     All locks that are currently held on table ROOM
SELECT lockmode, lockstate, rowidlength, rowidhex, rowid
FROM DOMAIN.LOCKS
    WHERE tablename = 'ROOM'
●     All locks that the current user holds in that database session on table ROOM
SELECT lockmode, lockstate, rowidlength, rowidhex, rowid
FROM DOMAIN.LOCKS, SYSINFO.SESSIONS
    WHERE tablename = 'ROOM'
      AND locks.session = sessions.sessionid
●     All locks that are currently held on the table with the hexadecimal internal identification 000000000000035D
SELECT lockmode, lockstate, rowidlength, rowidhex, rowid
FROM DOMAIN.LOCKS
    WHERE tableid = X'000000000000035D'
If the current user is the database administrator (DBA user) or the database system administrator (SYSDBA user), then all currently held locks are shown.
Users that belong to other user classes only see the locks held by that one user.
Definition
The system table LOCKS describes the current lock entries and entries for lock requests.
Structure
LOCKS
SESSION
FIXED(10)
ID of the database session
TRANSCOUNT
CHAR(20)
Transaction identification in the database session
PROCESS
FIXED(10)
Process identification in the database instance
USERNAME
CHAR(32)
Name of the user
DATE
DATE(10)
Creation date of the lock
TIME
TIME(8)
Creation time of the lock
TERMID
CHAR(18)
User terminal identification
LASTWRITE
CHAR(10)
Elapsed time since the last SQL statement for data manipulation
LOCKMODE
CHAR(14)
Type of lock (NULL value | SHARE | EXCLUSIVE)
LOCKSTATE
CHAR(10)
Status of lock
APPLPROCESS
FIXED(10)
Process identification on the client hardware
APPLNODE
CHAR(64)
Client hardware identification
SCHEMANAME
CHAR(32)
Name of the schema of the table
OWNER
CHAR(32)
Name of the owner of the table
TABLENAME
CHAR(32)
Name of the table
TABLEID
CHAR(8) BYTE
ID of the table
ROWIDLENGTH
FIXED(4)
Length of the key of the locked row
ROWIDHEX
CHAR(64) BYTE
Start of the key of the locked row in hexadecimal notation
ROWID
CHAR(128)
Start of the key of the locked row
http://dev.mysql.com/doc/maxdb/en/c4/812640632cec01e10000000a155106/content.htm

How i can keep my code after %dba standard table in sap query

hi expert,
how i can keep my code after %dba standard table in sap query..
add 1 to %count-VBRP.
%linr-VBRP = '01'.
extract %fg01.
%linr-VBRP = '02'.
extract %fg02.
%linr-VBRP = '04'.
extract %fg04.
%linr-VBRP = '05'.
extract %fg05.
%ext-VBRP05 = 'X'.
extract %fgwrVBRP05.
endselect.
i want keep my code after filling the standard table generated by sap abap query
Thanks & regards
Sajad Ahmad

Hi,
the above code is excuted succesfully, but if i have
return "Navigation" ;
it is not working
any idea why??????????

Add entries to standard table

Hey guys,
how can i add entries to a standard table (generic table)?
I have a function modul which has an export table of standard table and i'd to add some entries to this table. How can i do that? i don't know the table line type.
thx,
Wei-Ming

Hi Wei-Ming,
I was not sure what you were asking at the very first question, but it was clear for me at your 2nd post (but it seems it was not obvious for the other persons).
You must use field symbols or data references to manipulate the generic complex data objects (structure or internal table).
For example:
FIELD-SYMBOLS <ls_line> TYPE ANY.
FIELD-SYMBOLS <l_field> TYPE ANY.
APPEND INITIAL LINE TO et_test ASSIGNING <ls_line>.
ASSIGN COMPONENT 1 OF STRUCTURE <ls_line> TO <l_field>.
or
DATA dref TYPE REF TO DATA.
CREATE DATA dref LIKE LINE OF et_test.
ASSIGN dref->* TO <ls_line>. "dereferencing data reference
I let you search the forum and the ABAP documentation for more information.
BR
Sandra

Activating change documents for standard tables

Hi all,
Can someone please tell me how I can activate change documents for a standard table.
I created a change document object in SCDO and included the standard table I am working with. This table does not have "LOG DATA CHANGES' enabled in its technical settings. I checked the data element of the field I am interested in and it has "Change Document" enabled.
Is there any way to activate change documents for a std table without writing code to create change documents?
Thanks.

Hi,
Check this transaction SCU3, this is to activate the change logs for the tables.
Regards,
Satish

Extention set EA-FIN activated rules out the use of FEBA transaction

Hi all,
When Extension set EA-FIN is activated you can no longer call up the standard Bank Statement Processing (FEBA), instead FEBAN is called.
Does anybody know a way to still call FEBA after EA-FIN is activated or provide some insight into why FEBA does now call FEBAN.
Cheers,
Gudmundur

Hi Gudmundur,
After eytension has been switched on, the coding of FEBA executes in a different way. Coding has obviously been prepared to do so since Rel 4.7. It checks for the activated extension and jumps to FEBAN. That's it, you do not even get a message about that ...
There is one message you can switch on, to force FEBA to still be FEBA even though extension has been activated:
Maintain table views for messages: SM30
View: V_T100C
Application Area: NEW_FEBA
Message 001 for FEBA instead of FEBAN
Message 002 for FLB1 instead of FEBAN
FEBA will stay FEBA but issue an information to the user. That's it. If you want to, you can certainly start FEBAN at any time you want to ...
Kind regards,
Hartmut
PS: As far as I saw, this has not been in the Release Notes for EA-FIN. Found it by debugging FEBA ...

Standard Table entry after EA-FIN activation

Similar Messages

Maybe you are looking for