Standard tcode for (mass) data change of internal orders or ... ??

Hi!
I really need some info if there by any chance SAP has standard transaction for mass data change of internal orders (more particular, distribution rules in settlement rule section, which can be found in <b>KO02 transaction</b>  ).
I am trying to change distribution rules for settlement receivers in <b>settlement rule section</b>, that is finish past distribution rules by filling TO PERIOD and TO FISCAL YEAR fields on the right of each rule, and then entering new rules (which i get from external source -flat file, ms excel, csv...).
If i wanted to import data in SAP i guess i would have to develop a Batch Input. But that would take me some time to develop because it is pretty complicated.
I found tcode KO08 but i do not really know how to use it. Maybe there is another tcode that i am not aware of?
I would appreciate any suggestions!
Thnx, UK

Hi Srilakshimi,
If you are familiar with MASS transaction, then you can modify User Responsible field for Internal Orders from transaction KOK2.
As first step you must create a selection variant in order to define which orders you want to modify. Once selection variant was created, excute transaction with it and you'll get a screen similar to MASS transaction. Select the field you want and massively replace it. Do not forget to save.
Best Regards!
Mgitur

Similar Messages

  • Report for basic dates change in maintenance order

    Dear friends,
    Client requirement is to see the orders for which basic dates have been changed. The scenario is when preventive maintenance is done , if the work cannot be done on the date(basic date in maintenanc eorder), the basic date is changed for a convenient time. They want to have a report showing all the ordres for which the basic dates have been changed and the changed dates detail( ie. initial basic date, changed basic dates).
    best regds
    Arun

    Once you get the Change Document header data from CDHDR you will then need to get the change details from CDPOS.
    Have a look at program RSSCD200 via TCode SE38.
    There may well be a suitable function module for this...
    PeteA

  • Is there ant standard tcode for list of vendors, suppliers in ECC 6.0

    can any body tell me is there ant standard tcode for list of vendors, suppliers in ECC 6.0

    Hi
    The standard Tcode for list of vendors is S_ALR_87012086 - Vendor List .
    Check whether it is helpful to you or not.
    Plz assign points if it is helpful.
    Regards
    Tapan

  • Value Mapping Replication for Mass Data - Performance Issues

    Hi All,
    We are looking into Value Mapping Replication for Mass Data. We have done this for less number of fields.
    Now we might have to have 15,000 records in the cache for the Value Mapping. I am not sure how this would effect the Java Cache and Java Engine as a whole.
    There might be a situation where we will have to leave the 15K records in the cache table on Java Engine...
    Are there any parameters that we can look into just to see how this hits the performance.
    Any links/ guidance in the right direction might help me..
    reg

    Naveen,
    Check jins reply in this thread (they have done with API and without API using graphical but still some issues):
    Value mapping performance using LookUp API
    ---Satish

  • Anyone worked on Value Mapping Replication for Mass Data

    hi all,
    Is there any one who worked on <b>Value Mapping Replication for Mass Data</b> stuff.
    What is this?
    The on page 139 of the doc below tells about registereing
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/627d1cbc-0601-0010-aea2-c275521673f2
    Can any one explain guide me in that direction.
    reg,

    Naveen,
    Have a look at the weblog /people/sreekanth.babu2/blog/2005/02/23/value-mapping-replication
    Refer the below discussion too
    Re: How to edit roles for specific tasks in IR & ID?
    Best regards,
    raj.
    Message was edited by:
            Raj

  • What is the Tcode for GL account changes overview

    Can anyone tell me the Tcode for GL account changes overview?
    Thanks

    try this one
    OBYG OBYE
    OGOO
    SRY IGNORE THIS ONE
    Edited by: Sikindar on Feb 13, 2008 9:43 PM

  • Options for auditing data changes

    Hi Friends,
    I thought I will get some inputs on my following implementation. The requirement is to audit some data changes with in the system.( Oracle 10.2 on RHEL 4.7 )
    The audit is required in a sense that, the before images of data and information of who changed the data is required. I have looked at options like Oracle Auditing,FGA and so. But this cannot give me audit for the data changes,when and who changed.
    The first thing that comes into my mind are using triggers . Another option is using log miner. I have successfully tested it out with both of these approaches. The environment is like
    1 ) For some critical tables for which audit is required triggers were written ( ours is an OLTP application )
    2 ) For some non critical tables, log miner which was called by a stored procedure which runs at certain periods is used.
    3 ) audit data is stored in a different schema , with same table names as in base schema.
    I would like to know your thoughts on this.
    Thank You,
    SSN

    The delay with log miner is acceptable with some less critical audit tables and as you said, tirggers can be implemented for some critical tables.
    One bottleneck with using logminer is that it depends on the availability of archived redo logs, the backup mechanism if any implemented should make sure that, no archive logs are removed from the locations specified for the audit program. The backup mechanism should ensure that all archived logs are processed by periodically running audit program which uses log miner.
    Wondering if there is any other recommended approach for this.
    Thanks
    SSN

  • Tcode for mass closure of all the IO's

    Hi Expert
    Please let me tcode for mass closure of all the IO's instead of using tcode KO02 for individual IO.
    REgards
    Sachin

    Hi,
    you can use the transaction KOK4.
    Regards,
    Greta

  • Any BAPI available for mass creation/change/delete for dependency net

    Hi guys,
    Any BAPI available for mass creation/change/delete for constraints in dependency net. I mean any uploading option in mass for creation, change and delete.
    Regds
    Regds

    Hi,
    Check if the below FM's meet your need:
    CAMA_CNET_CONSTRAINT_MAINTAIN
    CAMA_CONSTRAINT_NET_MAINTAIN
    CAMA_DEPENDENCY_MAINTAIN
    Regards,
    Vivek

  • How to change the internal order type when it has been created?

    There is an internal order, when it being created, the user chose the incorrect order type and save it. but the internal order number is useful. so we just want to change the order type or delete the order to release the number.  so can you give me some solutions to solve it. I can not find the way neither change the order type nor delete it.  thanks very much.

    You are unable to change the internal order type once an internal order has been created, however you can delete the IO if there haven't been any postings made.
    In change mode (tcode KO02), go into the internal order.  Go into the following menu:  Edit > Deletion Flag > Set.    Before you exit the IO, save the master record.
    Depending upon your archiving settings, you should then be able to select the menu path:  Edit > Set Deletion Indicator.
    If the IO isn't deleted, you can "clobber" it by going into the IMG and deleting the IO using the function "Delete Test Data".  This should only be done by a technical person to ensure that a mass-delete doesn't occur.
    Please note that if the IO was an internally assigned number, you might just want to block it and re-use it later.
    Hope this helps.
    Kylie

  • SAP Note for XD99 : Data changed but Output screen show error message

    This is regarding the XD99.. Mass data update.
    I am looking for SAP Note to fix it. Here data is changed KNA1-Name1 but output shows the Error message..
    Is there any Sap Note for this.
    Edited by: Mukesh Mahajan on Dec 9, 2010 2:45 PM
    Edited by: Mukesh Mahajan on Dec 9, 2010 2:47 PM
    Moderator message: please have a look in the Service Marketplace yourself.
    Edited by: Thomas Zloch on Dec 9, 2010 2:58 PM

    Hi there, gwinslo. You have come to the right place.
    From what I have been reading from other posts on this forum, the issue may
    be caused by the clear history settings.
    Press the '''<Alt>''' or '''<F10>''' key to bring up the tool bar. Then '''Tools > Options > Privacy'''.
    The button next to '''History''', select '''Use Custom Settings'''.
    At the bottom of the page, turn on '''Clear History When Firefox Closes.'''
    At the far right, press the '''Settings''' button. Turn on ONLY '''Cache''' and
    '''Form And Search History''' leaving the others off.
    '''https://support.mozilla.org/questions/997866?esab=a&s=&r=1&as=s''' {web link}
    This is not a cure but will make it easier if Firefox locks up.

  • Open Transactions in ECC for Master Data changes in MDM

    Hi All,
    I have a basic Design question on how to handle the impact of Data changes in MDM for any open transactions with that Master object. For eg if we have a Material set up in MDM and in ECC and there are open Purchase Orders for that Material, now if the Base Unit of Measure is changed in MDM and gets harmonized to ECC(After Workflow approval of the Change) how will it impact the PO attached to the material . Can we do any configuration in ECC that will restrict any Open PO s not to take the new changed value and any new POs taking up the new Base Unit of Measure , or can we set up an alert/notification that will trigger for a PO whenever any Master Data is changed and the PO takes the new changed value on the fly . What will be the best approach from a solution point of view .
    Thanks ,
    Prabuddha

    Hi Prabuddha,
    In ECC if a change happens to a master data not all the changes are reflected automatically in the open documents like open PO or open Sales order. Some fields values have to be redetermined for eg: "pricing procedure", some of them needs to be changed manually for eg: "Description". Moreover specific to your eg of Base unit of measure, this is a sensitive field and has lot of impact on the process so there for changing such fields it is necessary to close all the open documents against the Master data record in consideration. This fact is regardless whether the change happens through an IDoc or directly by MM02/XK02/XD02
    Prabudha, Please revert if you have further questions.
    Best Regards
    P T Manoj
    Edited by: PT MANOJ on Sep 2, 2011 10:25 PM

  • Reporting: Table / Tcode for Payment Terms change history in posted documents

    Hi everyone,
    First of all, thanks in advance for your help on this one.
    Please let me know the Table name where we can see the previous Payment Terms and revised payment terms of documents in a specific company code.
    For example: if a document had payment terms 45 and they were modified to 00 or 15.
    Or is there any transaction code to track Payment Terms changes accounting documents? Where I can select company code and build a report based on this field alone, during a specific timeframe (Q1 2014 or Q2 2014.
    Thanks again and best regards,
    Christian.

    Hi Christian,
    You can use standard reports to veiew the changes in doucments e.g.:
    FB04 - Document Changes
    S_ALR_87012293 - Display of Changed Documents
    FB04
    S_ALR_87012293:
    Regards
    Javed

  • Table for table data changes log

    Hello,
    The data in the table T016 was updated with new records.
    I want to know the log for the table data changes. In the table's technical settings the check box "Log data changes" was checked and Delivery Class is 'C'.
    I tried with SCU3 transaction, but it is saying no log for the table.
    And also i checked the tables DBTABLOG,DBTABPRT. But there are no records available.
    Regards,
    Ravi.

    Look at this link below
    http://www.mariewagener.de/Note.September.2007
    usually system parameter rec/client should be enabled to store table changes - this is the reason you can't see table changes in dbtablog table.

  • RDA for Transactional Data Changes (But needs to load as Master Data to IO)

    Hi,
        I would like to use RDA to load Data changes into IO (Not for DSO).
    I tried using this, i can able to load data into PSA. But, from PSA to IO, No datapackage is getting transfered. i.e. Transfered records = 0.
    We considered several options i.e. remote cubes etc. We need to implement RDA.
    Note: I have gone through the Documentation on RDA. Which SAP mentioned, RDA won't support for Master Data if we have aggregates. We don't have any Aggregates build on my cubes.
    Thanks in advacne!!!
    Nagesh Ganisetti.

    RDA DTP is used for supplying data to the Data Store Objects but not to the Master data infoobjects...
    Please follow the links to get to know more on this..
    http://help.sap.com/saphelp_nw2004s/helpdata/en/42/f98e07cc483255e10000000a1553f7/frameset.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/42/fa50e40f501a77e10000000a422035/content.htm
    thanks
    hope this helps..

Maybe you are looking for