Standard TCodes to Display Archived Contract Account and BP

Hi All,
I am trying to dislay Contract account and/or BP, tried in CAA3, CAA2 etc, but it does not give any option to call from archive.
Anyone has come across this situation or has the knowledge please share.
Thanks
MS

This was already answered in this discussion.Correct Answer by Amlan Banerjee on Dec 3, 2013 9:48 PM
Check out the discussion 'Viewing archived contract account transactions' in SCN.
Viewing archived contract account transactions
You can use the same transaction Code FPL9 for viewing the archived CA's transactions.
However, in the FPL9 screen you will find a With Archive Check box under Further Selections tab.
You need to tick the check box and give the date in the Since column.
Hope it helps..
Thanks,
Amlan

Similar Messages

Relationship Between BP, Contract, Contract Account and industry

Hi,
Anybody can send the relatonship diagram between BP,Contract, Contract Account, and Industry , with Relation ship fields,
Regards,
Sivakumar.

Can u send me your mail id, So that i can mail u.
These relation is your business specific.....
If u want i can send you.......
Regards,
Shiv

Archive contract accounts in IS-U/CCS

Hi,
I'm trying to archive contract accounts in IS-U but it does not work yet.
Does someone have all the steps to accomplish this?
Thank you in advance for your help.
Jérôme

Thank you.

Contract Account and Device Location

Hi Everyone,
How to figure out the attaced Devices and Device Location
for a particular Contract Account.
My requirement is:
If there is commercial customer with multiple devices which contains multiple meters... i need to collect the daily meter reads of the all the meters on each day in a report and display it with the following.
Contract Account meter number consumption date
2100000003445     100000452       100           15.06.2008
2100000003445     100000452       100           16.06.2008
2100000003445     100000452       100           17.06.2008
2100000003445     100000452       100           18.06.2008
2100000003445     100000452       100           19.06.2008
Regards,
Vinay

Hi,
The FM to collect the MR by Contract his BAPI_MTRREADDOC_GETLIST.
Hope it helps,
AAL!

DUNNING- Contract Account and Leading Contract Account

in table FKKAMKO we are finding that contract account (VKONTO) and leading contract account number (VKNT1) is different
though the collection step is trigerred. further print date (MDRKD) is blank for these. We are dunning and grouping at contract account level and we have duning item grouping enhacement at event 317
what will be the reason behind this and how to solve it? whether its due to enhacement at 317? We tried but not able to find solution for the same.

Hi Vinod,
There are two settings you need to maintain for grouping in collections
(a) SPRO->Financial Accounting (New)->Contract Accounts Receivable and Payable->Organizational Units->Set Up Company Codes for Contract Accounts Receivable and Payable
In here, you have to maintain, whether the master data grouping will happen at Contract account or contract level.
No assignment means that open items do not participate in Collections Management
(b) SPRO->Financial Accounting (New)->Contract Accounts Receivable and Payable->Business Transactions->Dunning->Dunning by Collection Strategy->Master Data Grouping
If you maintain these two settings , you do not to customise for grouping the items in event 317.
Moreover, you can also check transaction FPCG, whether grouping is maintained or not for a contract account.
Is there any other specific reason for customization at event 317?.
Thanks,
Amlan

Archived POP account and email is gone

I archived a bunch of emails in a netzero account (POP) and now I can't find them. I was assuming that an "archive" folder would appear somewhere. It did not. When I tried it in my gmail account, it worked fine, but no luck with the netzero account.
If it's supposed to be on netzero's servers, that is of little use to me, as I have that set up to delete messages after they download to my computer. I did check; they are not on netzero's server either.
Any thoughts or help? Is there an undo? Should I be looking for the archive folder in finder, or should it appear in my mail someplace?
Thanks in advance.

Sorry, at moment there is no way to create a folder in a POP account. I know, bummer. I hope they add it at sometime.
Best way to store on phone for long term is to forward it to yourself thus it gets put in SENT items (which is fully stored on phone as opposed to just headers). It is how I keep some documents (like my resume) ready to send at any time.

How to set up start and end dates for validity of contract account in FICAx

Hi,
Can anyone tell me where can I set up the validitiy period for the contract account in FICA. In contract creation, I could just see the contract validity start date. I also need to know the validity end date. Please let me know the solution asap.
Points will be awarded for all the useful answers.
Thanks
Santosh

Yes, you're right, you would then need to develop a lot of user exits to prevent the re-use of the contract account after the validity date.
I'm think in a strange solution, it could work but you'll need to test it. if a contract account is marked for deletion (Field FKKVKP-LOEVM equal to 'X') no further action can be made over it, When you create you contract account you can schedule a change using as validity date (Field BUS000FLDS-VALDT ins the change contract account screen) to the end date of you contract account and set this deletion flag. then you run FPP2A to activate the schedule changes, before you get to the end date the flag is not set, when you get to the end date FPP2A will activate the flag and the contract account becomes not usefull.
If you do this, you have be careful because all the postings to the contract account won't be possible, it means that if there are payment to be made, interests to be calculated, etc... nothing will be posted.
Cheers,

Does Business Partner have one Contract Account per premise ?

Hi,
Business Master Data
a) Business partner
b) Contract Account
c) Contract
Technical Master Data
a)Connection Object
b)Premise
c)Installation.
Relations:
One Business Partner will have multiple Contract Accounts
One Contract Account will have multiple Contracts( ex: Gas contract or Electricity contract or water contract)
One Contract will have one installation
One Connection Object will have multiple Premises.
One Premise will have will have multiple installations
Question:
Is it like one Contract Account can link to only one premise? Or does it depend on Company data model?
One Business partner has 2 properties at 2 different premises. And 2 contract at these 2 premises.
To manage this situation, Does BP need 2 different CA or only CA can have these 2 contract with different premises?
Thanks in advance.
Regards,
Murtuza

Murtuza:
The cardinality is as follows:
1 BP : n CA
1 CA : n Contracts
1 Contract : 1 Installation
1 Connection object : n Premises
1 Premise : n Installations
So a Bp can have 1 or several contract accounts, and an account can have 1 or more contracts, and the contracts for an account can be for any service locations - they are not limited [standard system behavior] to a specific location. Client data model and business rules may determine differently.
regards,
bill.

Creating Contract Account "With Sample" at migration with emigall?

Hi!
Is it possible to define a "With Sample" type of a creation of Contract Account (and Contract Object) as it is possible at manual creation/posting? I was looking for a standard field and haven't find it.
Thanks for your help!
Best regards,
Peter

Theres a button "Create with Sample" in manual posting of ContractAccout: [screen-shoot|http://www.shrani.si/f/r/S7/4SYcJ9N4/cac.jpg]
...and also at ContractObject.
Thanks for help.
Best regards,
Peter

No-determination of Contract account in sales order

Hi All,
I have created a Business Partner and created a contract account for the same, but while creating sales order for the same BP, system is asking for contract account, and not allowing me to enter the same in line item,
giving an error message and exit from the screen.
help will be appriciated,
thanks in advance,
Kapoor N

Hi Dewang,
I have Copied the message pls check,
I have assigned 3 Conract accounts to this business partner but system shows me a warning message, "no contract account found" when i goto item--> Billing Document tab at that time system gives me the below mentioned error.
thanks for your help in advance,
Kapoor
Contract does not exist
Message no. E9011
Diagnosis
You have specified a record that does not exist in the database.
System Response
If you created the specified record in a previous workstep, the update process is not yet completed. Or, the process may have been canceled.
Procedure
In the case of an update process still being carried out, wait until the update of the desired record is completed.
In the case of a canceled update process, determine the reason for termination.
It is also possible that you have entered data incorrectly. Check your entry.

Contract account as Business Agreement not updated till baug_main reloaded

Contract Acount is replicated as business agreement only after i re-load the baug_main object. I have to re-load this object each time i create a contract account and want to see in as business agreement in CRM.
Does Anyone know a way around this problem.
I will very grateful for any help or clue.
Regards,
Nasreen

Hi,
Please do the configuration at the below place.
Your problem will be solved.
IMG>Financial Accounting>Contract Account>Integration>Customer Relationship Management>Business Agreement>Determine Template for Contract Account Replication.
Warm regards,
Rahul

Connecting Utility Customer E-Services with contract account

Hello,
We installed UCES 6.0.
Today we use partners (BUS1006) as objtype_0 to connect different user.
Does anybody know if it's possible to use contract account (ISUACCOUNT ?) to connect a user for one of his contract account and not all of them ?
Regards,
Bruno

Bruno,
to link a contract directly to a user account, you put "CA_VREF_GP" in the objtype field and BP#(10) + C#(20) in the objkey field.
Let me knwo if that works for you too.
Thanks,
Yonghua

Tcode for displaying the changes made to sales order

hi,
i want to know is dere any tcode which displays how many times and by whom and what are the changes made to sales order.

hiii
use VA03 for display..
also refer to following link
Regarding 'display of changes in the sales order'.
regards
twinkal

More than one contract for the same contract account

Hello experts,
As you know, the same contract account could has more than one utility contract.
I want - by customizing - prevent users from creating new move in ( new utility contract ) for a contract account that has a contract.
I don't want to do this functionality by user exits. Do you know how can I do this by customizing ( spro )?
I am appreciating any help.
Thanks...
Hussam.

This depends on which transaction you are using for move-in. The only control you can have on this is by configuring your Master Data Template to always use a New Contract Account being created during move-in. If you are using CRM front end for doing move-in, you could by default check the option for create new contract account and lock that field from being edited.

Require FM for setting lock on contract Account

Hi,
Please let me know Function module.
I want to maintain on intrest lock as X on contract account and dunning lock as 'X' under Tab Dunning.
Thanks,
Sam

Hi Tamas,
I think you will need to save it and look into event 1800 which you can use to create the locks.
regards,
David

Standard TCodes to Display Archived Contract Account and BP

Similar Messages

Maybe you are looking for