Standard temperatures of iMac A1418

Hello!
Can you show me standard temperatures of iMac A1418?
Thanks!

CLICKY CLICK---> http://support.apple.com/kb/HT1758 How to identify iMac models

Similar Messages

  • Problem  High running Temperature  Specification iMac 27 inch  Mac OS X  Includes Software Snow Leopard upgraded to Mountain Lion  OS X 10.8.03 (1278) 251 GB Flash Drive 2 TB  Sata disk Processor 3.4 Ghz Intel Core I7 Memory 16 GB 1333 MHz DDR3  Graphics

    Problem
    High running Temperature
    Specification
    iMac 27 inch
    Mac OS X  Includes Software Snow Leopard upgraded to Mountain Lion  OS X 10.8.03 (1278)
    251 GB Flash Drive
    2 TB  Sata disk
    Processor 3.4 Ghz Intel Core I7
    Memory 16 GB 1333 MHz DDR3
    Graphics AMD Radeon HD 6970 2048 MB
    Video: Software Final Cut Pro X  10.0.8
    I use the imac mainly for editing Video which when doing so it has reached temperatures of near to 60° C which causes the program to become unstable and needs to be cooled down to operate correctly.
    An Apple technician (by phone) advised me to download an smcfancontrol.  This allows each individual fan to increase speed and also advises the current temperature at °C.  The smcfancontrol has been downloaded but this has not resolved the problem.  By increasing the speed of the fan more heat is generated and creates additional noise. 
    I have since taken the iMac to an Apple Store for examination as suggested by APPLECARE when the fans were found to be working correctly.  An Apple Store technician carried out a test, but not whilst working under the pressure of FINAL CUT PRO when the iMac generates a high temperature.
    The Temperature Specification  for this model is
    Operating Temperature 20 °c to 35°C
    Storage Temp.47°c
    Clearly the temperature my iMac  is operating at is excessive and could cause the computer to break down prematurely.  Has anyone experienced this problem.
    Frank Howell

    When was the last time you cleaned/vacuumed out all of your iMac's vents, slots and ports.
    You need to do this with the iMac powered down, disconnected from power and everything disconnected.
    Lay your iMac, screen down, on a soft surface, like a heavy towel. Use a small electronics vac, or portable or full size vac with hose and a crevice tool attachment and carefully and slowly vacuum every vent, slot and port on your iMac.
    Then reconnect everything up, power up and download and install iStat Pro. Start working, then report the temps of your iMac after this has been done.
    When using SMCFan Control, it is important not to run the fans at too high an RPM. This doesn't generate heat on its own, but will suck in more dust, lint and dirt into your iMac, and that will be the cause of additonal increases in heat.
    I run my fans in the range of 1400-1600 RPMs. You can go as high as 1800 RPMs but it is important to keep the RPM range below either 1800 or below 2000 RPMs.
    I, also, run a very small desktop fan pointed toward the upper back of my iMac to keep temps down even further.

  • Hi Just got a iMac A1418.21.5 I am looking for some advice on what Final Cut pro would work well with it? many thanks

    Hi Just got a iMac A1418.21.5 I am looking for some advice on what Final Cut Pro  series would work well with this set up ? regards

    How much Ram? Final Cut Pro X is the only version curently developed and is available on the App Store.

  • Fan Speeds and Temperatures 24" iMac 2.8GHz

    What are the default fan speeds for a 24" iMac 2.8 GHz?
    Also, what are the 'normal' temperatures for this computer?

    The default iMac profile is the best for general use. For calibration get a Spyder 3 Pro: http://spyder.datacolor.com/product-mc-s3pro.php
    George

  • Standard or customise imac

    i am thinking of getting the imac 27" and wondered would it be better to customise it or keep the standard spec.
    standard at the moment is:
    3.4GHz Quad-core Intel Core i5, Turbo Boost up to 3.8GHz
    8GB 1600MHz DDR3 SDRAM - 2X4GB
    1TB Serial ATA Drive @ 7200 rpm
    NVIDIA GeForce GTX 775M 2GB GDDR5
    i use my computer for internet, email, music, watching videos including 1080p, photos including basic editing etc.
    will i notice a difference upgrading to i7 3.5ghz and 1tb fusion drive or would it be pointless.
    my current pc is:
    asus m4a87td
    amd 6 core 1055t 2.8
    4gb ddr3 1300
    geforce gtx 460
    1tb HDD and 256gb SSD
    23" samsung lcd monitor (HDMI)
    windows 8.1

    IMO, the standard should meet your needs. You're not doing any heavy movie or music editing or composing.
    iMac refurb (27-inch Mid 2011), OS X Mavericks (10.9.4), SL & ML, G4 450 MP w/Leopard, 9.2.2

  • Normal operating temperature for imac

    I have just downloaded "temperature monitor" and it indicates the CPU is at 46c. At times the cooling fan will kick in at 26c yet currently at 46c it is not running.

    Mine is about the same as yours.  You can see the "idle" speeds of my fans.  iMac i7.
    Regards
    Edit:  At these speeds the sound of the fan is not noticeable.  Just a little airflow coming out the vent.

  • Standard software with iMac?

    My Imac has changed for a new one, with this new one there are 2 dvd's in the package, OS X install dvd and applications install dvd.
    Why not in the first delivery and wich dvd's are standard deliveredwith a new Imac??

    You should get the install and applications disc. That's all.

  • How do I install CS6:Design Standard onto my iMac? I already had it on my MacBook Pro and should get 2 downloads with the student version?

    I bought the student version of CS6 Design standard 3 years ago and installed it on my MacBook Pro. I now just purchased an iMac and would like to download it onto this as well. I should be able to download it onto two computers from what I understand, but when I insert the disk for download, there is no install.app on the disk any longer. I only see set-up.exe (which is for windows). How can I get the programs downloaded onto my iMac?

    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  5.6| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • Average Temperatures for iMac

    What is an average temperature for an iMac (or computer in general) to be running at? How hot is too hot? I have a Temperature Monitor program and want to know when I should let my computer cool before damaging.

    Eric Ross wrote:
    Don't worry about the temperature, the system has some build in monitors that manage the fans to cool the system down if it get to hot, and it will shut down before it get hot enough to do any damage.  
    Eric, I wouldn't be so complacent. Overheating, well under the thermal shutdown threshold, long term, can do significant hardware damage. And the fans are not programmed to ramp up quickly enough. Apple prefers quiet fans for a better "listening experience." That is why many of us use smcFan Control.
    With smcFan, I recommend creating four or five different settings above the defaults, each in increments of about 15-20%, up to about 2K rpm. I try to run smcFan conservatively at the minimum setting needed to keep things reasonably cool. You don't want to burn up the fan motors.
    I also run a small fan at the back of the computer aimed at the hottest section, the upper left corner as you face the screen. This will help dissipate a good deal of the heat at the aluminum back, which is meant to act as a large heat sink.
    partyboy: why don't you just post your temps.
    Here are some "normal" summer time temps. (I have smcFan set to my second lowest setting, here.) The ambient temp shown is completely out of whack. The room was probably in the low to mid eighties, Fahrenheit.
    I wouldn't like to run a drive for long periods in the mid fifties, or the power supply (Board Proximity) in the mid 60s.
    The temps will vary considerably according to what you are doing. If you are running a game, expect much higher temps, overall.

  • Normal Temperatures for iMac 27"

    My iMac 27" quad-core i5 seems hot. 
    I'm using Temperature Monitor
    http://www.bresink.de/osx/0TemperatureMonitor/download.php5
    What temperature range(s) are normal for this computer?
    Thank you for your help.
      - nello

    What temps are you getting?
    Closest I can find is this...
    http://www.intelmactemp.com/list?v_model=95&v_cpufreq=&v_memory=&v_hddsize=&v_hd drpm=&v_serial=&v_macosxver=&v_ambient_1=&v_ambient_2=&v_idleoem_1=&v_idleoem_2= &v_loadoem_1=&v_loadoem_2=&v_hddtemp_1=&v_hddtemp_2=&v_whine=&v_moo=&v_postedby=

  • Temperature of imac '24 too high ?

    http://img501.imageshack.us/img501/9958/picture3pk4.png
    is this a normal temperature for my imac? im a bit concerned because this..
    Thanks

    Ricardo, Your temps look pretty good except for the Hard drive. By no means do you want your hard drive to run at it's maximum operating temperature all the time like that. What is your Ambient temperature? There are three internal fans in your iMac and they can be adjusted individually. One for the CPU, one for the Hard drive, and one for the Optical Drive. To adjust the fans download and install SMCFanControl:
    http://www.versiontracker.com/dyn/moreinfo/macosx/31029
    I've increased my fans several hundred rpms and they are still barely audible. Your default fan speeds I believe are ODD:700, HDD:1200, and CPU:1200. A few tips, the CPU fan provides cooling for the CPU, GPU, and Power Supply. It would be good if you can get your Power Supply under 60C and you want the hard drive under 50C if possible. You might try setting them like this:
    ODD: 1000-1100
    HDD: 1700-1800
    CPU: 1500-1600
    Examples:
    http://ftp.georgetek.com/George/Temps_Current.png
    http://ftp.georgetek.com/George/SMCFanControl.png
    George

  • Normal temperature of iMac?

    Greetings. My name is Matt Furillo (obviously), and I almost got an eMac until I decided "what the heck" -- and got this beautiful SuperDrive 17 inch iMac.
    Things are strange, albeit in a wonderful way -- I'm so used to the unnecessarily complex ways of the PC world that the change is sometimes overwhelming. I'm slowly getting used to using a one button mouse, and the task bar at the top still has me taking double looks once in awhile.
    Everything is great, and the only thing that has happened so far that has been questionable is a non-responding DVD Player. I forced quit and re-opened it, and it seemed to work fine.
    Now, onto the real reason for this post: I downloaded a widget called "CPU Heat." Should I be worried that my iMac's current temperature is 175 degrees Farenheight (sp.)? Is that normal?
    My fan is often always on, even when I just have Safari and AIM open. That worries me a bit too.
    Hopefully, I'm just a new overreacting user. ^_^
    Thanks in advance for any possible help,
    Matt Furillo

    hey matt,
    -first off i'd get a 2 button mouse, my BENQ kicks as*
    -fans are always on, exept when off or in sleep mode,
    -i use "X Resource Graph", tells temp + fan speeds and heaps more (free + accurate) can get it from 'versiontracker.com'
    -if your temp gets to high, the imac will shutdown to not hurt anything.

  • PH 7 suite updating to CS2 standard and getting imac intel core duo

    I really love my Adobe programs. I am going to get an new Intel imac 20" and was wondering if I should update my Photshop 7 to CS2 (standard) or get a full version of CS2 to install on the new mac. I have seen some problems with the programs from old to new imacs. Would the update be necessary?
    G4 1ghz   Mac OS X (10.3.9)  

    I would wait until next year to upgrade. The Universal binary that comes out next year will be the upgrade from CS2 to CS3 or whatever Adobe ends up calling it, especially if it integrates the former Macromedia products into the suite. It will definitely be an update that you will have to buy.
    You will need to check with Adobe on what this upgrade will cost you. You are currently to upgrades behind, so the next one will make three. You may have to pay full price.

  • Highest temperature for imac

    we had pretty warm days this summer and my computer room was burning the mac was hotter than ever so i decided to put an external fan/ventilator at the back approx. 50 cm away so it could cool down the mac which is the highest temperature that an imac can stand and perform without risking any damage ? not only the environmental temperature but also the imac's internal one

    based on your hardware specs it sounds like you have an iMac Late 2006
    http://support.apple.com/kb/Sp28
    "Electrical and environmental requirements
    Meets ENERGY STAR requirements
    Line voltage: 100-240V AC
    Frequency: 50Hz to 60Hz, single phase
    Maximum continuous power: 180W (17- and 20-inch models); 220W (24-inch model)
    Operating temperature: 50° to 95° F (10° to 35° C)
    Storage temperature: -40° to 185° F (-40° to 85° C)
    Relative humidity: 5% to 95% noncondensing
    Maximum altitude: 10,000 feet"
    Operating temperature: 50° to 95° F (10° to 35° C)<---

  • Storage temperature for iMac??

    Need advise please!!
    I have a iMac G5(Ambient Light Sensor). I bought it in spring 2005 and it's the one that does NOT have the built-in web cam. I checked Apple's support and found it listed in the specs pages BUT my model doesn't show Operating or Storage temps. The model BEFORE it, iMac G5, and the model AFTER it, iMac G5 (iSight) both show:
    Operating temperature: 50° to 95° F (10° to 35° C)
    Storage temperature: -40° to 185° F (-40° to 85° C)
    I want to store the thing in temps down to 40 below. Will I ruin the LCD or should I assume the temps listed in the other models also apply to mine?

    It is a safe assumption that the temps listed for the other two models will apply to yours as well.
    Just out of curiosity, where will you encounter -40 temps?

Maybe you are looking for