Standard test key in operation overview in routing

Iam not able to see standard text key in operation overview in routing beside control key column. Any setting for it .

hi,
   I dont think that that the STK is dispalayed in the operation overview.
so first ensure that the STK is defined in the WORK centre basic data view. Then goback to the operation view of u r routing.
Double click on the operation ,then u will find in the OPERATION details view that u r STK is diplayed just below your CONTROL key.
GURUS pls correct me if i am wrong,
PLs update on this
THNX
HKR

Similar Messages

  • Default Standard Text Key or Standard Text to first Operation of Order

    I would like to have a standard text key or standard text defaulted for the first operation of an order created via IW31 of certain order type.
    For example we have an order type called CORR for corrective orders.  When ever there is a break fix, the user would create a CORR order via IW31.  When this order type is used I want the first operation to have a predefined Standard text key defaulted.  In this case we was our first operation to have a safety message and precautions listed.
    This would work similar to a planned order that calls from a task list and has text in the task list.
    I did some review and testing of the "Assign Standard Texts for Short Messages to Order Types", but as I understand it, this only works for sending message and not including text on the operation.
    Is what I want to do possible?  Or would it make more sense to use an exit like IWO10020, Maintenance order: Automatically include task list .  I guess I could create a general task list and use that in this exit for all CORR order types.
    Edited by: Darrell Dorsey on May 25, 2010 10:26 AM
    Edited by: Darrell Dorsey on May 25, 2010 10:30 AM

    For the scenario that you are referring to, i believe this would be the option that would be flexible. Yes, you will have to little bit of custom development for this  and i don't see any standard functionality to default the standard text on the first operation for specific order types. You should be able to attach a task list where its planning plant differs with that of the Order plant.
    There are much more simpler options available, if you are open to using a  different work center(You could default the Standard text key on the work center), if you are open to create a separate transaction for this order type (you could default the Standard text by creating a transaction variant through SHDO), If you are using GuiXT widely in your organization you could write a small simple script to default the Standard text for this order type.
    Regards
    Narasimhan

  • Operation Overview-Standard Values Rounding

    In production order operation overview screen, the standard values (setup time & Processing time duration) are rounding up and displaying with one decimal place. Where as in routing the same standard values are displaying with 3 decimal places.
    Is there any config setting (or screen exit) for to display setuptime duration in CO02/CO03 operation overview screen with more than one decimal places?

    Saiful,
    Execute T code CUNI.
    Select 'Time' & click on 'Unit of measurement'.
    In the next screen, select the desirder UOM. Click on details.
    Under 'Display' put 3 for 'Decimal places'.
    And under conversion put 6 for 'Decimal places rounding'. Save.
    It will solve your problem.
    Hope this helps you.
    SmanS

  • Standard test error in the task list operations

    Hi Friends,
    We made a Z program in such a way that Task list operation long text through standard text key (CA10) will get updated automatically for
    those associated operations, but the problem we never observed that program is overwriting the
    standard text key entries on the operations while updating the long text, and unfortunately
    it went to the production environment and it has been keep on executing the
    program for last 3 months and suddenly we came to know that there is bug in the
    code.
    My main intention is how to trace till now how many reports
    got corrupted and how to restore back those records which were effected in PRD environment.
    Regards,
    Srinika

    Greetings Srinika,
    I assume that the Z-program enters the Task List and re-enters the Standard Text Key KTSCH, does it call the standard transaction IA12? Maybe a good place to start is to see whether the Change Documents had been saved. Does the Z-program run as batch, as a particular user?
    Query the table CDHDR on the object PLAN, then based on the Object & Document numbers query CDPOS. You can get the Task List & Operations from CDPOS field TABKEY.

  • How to get F4 help for Standard Text Key of a operation based on Order type

    Hi Experts,
      How to get F4 help for Standard Text Key (STK) of a operation based on Order type entered in selection screen. The F4 help should give the STK of related order type. At the same time the F4 help for Task Types based on Notification type. How to acheive the above two. Please provide the table names or any search help name if exists or Function modules...
    Thanks in Advance.
    Regads,
    Bujji

    Hi Guys,
       Any help on this...
    Regards,
    Bujji
    Edited by: Bujji on Dec 22, 2008 12:42 PM
    Edited by: Bujji on Jan 5, 2009 2:00 PM

  • How to use Standard Text Key in maintenance order header long text?

    Dear All,
    I have created a standard text key using transaction CA10 and I want to use this in maintenance order header long text. Is there any way to select any standard text key in maintenance order header long text?
    Regards & Thanks,
    Saif

    Hi
    To use standard texts, perform the following six steps:
    Select the maintenance order and access the operation overview screen using Goto -->Operation overview.
    You can enter standard text keys in this screen or in a detail screen for the relevant operation.
    Enter a standard text key in the appropriate field and press ENTER .
    If the text is longer that the short text line available, the field Text is selected for that operation.
    Check the long text and edit it if necessary. To do this, select the operation and choose Operation--> Long text.
    The system branches to the text editor screen. If you also entered a short text for the operation and specified that this should not be overwritten by the standard text, you will see the short text displayed in the first line of the editor. The following lines contain the standard text.
    Check the standard text and change it if necessary.
    Save the final version of the text and return to the previous screen with Goto--> Back.
    Save the maintenance order.
    Standard texts are created for your system by your system administrator using the Customizing function.
    Regards
    Makarand Gurjar

  • Changes to the Standard Text Key in a PM order

    Hi all,
    Is there a better way to track changes to the Standard Text Key in a PM order? When I change the Standard Text Key in the Operations tab (t-code IW32) and I access the change log (menu: Extras > Other documents > Changes) I only see that the language key has been changed. I don’t see the actual Standard Text Key value. Any ideas?
    Thanks in advance for your help.
    Adriana

    Hi
    To use standard texts, perform the following six steps:
    Select the maintenance order and access the operation overview screen using Goto -->Operation overview.
    You can enter standard text keys in this screen or in a detail screen for the relevant operation.
    Enter a standard text key in the appropriate field and press ENTER .
    If the text is longer that the short text line available, the field Text is selected for that operation.
    Check the long text and edit it if necessary. To do this, select the operation and choose Operation--> Long text.
    The system branches to the text editor screen. If you also entered a short text for the operation and specified that this should not be overwritten by the standard text, you will see the short text displayed in the first line of the editor. The following lines contain the standard text.
    Check the standard text and change it if necessary.
    Save the final version of the text and return to the previous screen with Goto--> Back.
    Save the maintenance order.
    Standard texts are created for your system by your system administrator using the Customizing function.
    Regards
    Makarand Gurjar

  • Add columns to CO02-Operations Overview

    Hi Gurus
    I'm trying to add couple of columns to the Operations Overview display layout in CO02 Transaction. Can someone please let me know how this is done?
    Thanks in advance
    Deepak

    HI Brahmankar
    Thank you for the reply.
    But in OPM2 it is about adding fields in CO02-Tab pages. My issue is with inserting Columns in the Operation Overview screen of Production Orders. I wish to display the "Start-Time" column and "Standard Text Key" columns that are not appearing. I wish to know what chnges have prompted them to get hidden as they get displayed in the standard SAP System.
    Regards
    Deepak Prasanna S

  • Reg : User Exit for IA05 - Operation Overview

    Hi Team,
    I have a requirement in IA05 in the operation overview we have a field called Std Text field(PLPOD-KTSCH) , Where the user gives the text field in the screen,
    So based on the text key i need to populate  work,duration, in the same screen as attached
    How can i achieve this i mean exit/badi??
    i am trying but i am not getting a suitable one.
    Please help he to crack this.
    Thanks!
    Karthik.S

    EXIT_SAPLCPDA_001 -Customer-Enhancements for Tasklists
    EXIT_SAPLCPDA_002 -Customer-Enhancements for Tasklists
    EXIT_SAPLCPDO_001 -PS: User fields
    EXIT_SAPLCPDO_002 -PS: Customer specific fields in process
    EXIT_SAPLCPDO_003 -PS: Customer specific fields in process
    EXIT_SAPLCPDO_004 -Test units of measure for reference operation set

  • Addition of two more column in Operation overview of inspeciton plan

    Dear Experts,
    I want to add two more additional column in operation overview of Inspeciton plan.
    Please suggest & how it has to be achieved.
    Thanks in advance.

    Did you try the user-defined fields? If no..
    1) Define user fields at configuration
    SPRO > Quality Management > Quality Planning > Inspection Planning > Operation > Define User Fields
    2) Input the user field key in operation then the user fields will be activated
    Regards
    Luke

  • Standard Text Key in order

    Hi
       I created std text key in CA10        
      How to configure in "Assign standard texts for short messages to order types" ?
    Alagesan

    The standard text key created by using CA10 will reflect against maintenance order in operation tab when selected from standard text key field in maintenance order operation tab.
    For the above said function no configuration is required. what every standard text key is selected for first operation, is copied automatically in maintenance order short message (provided that short message is not given by user different then first operation).
    Hope this reply helps you.

  • Keyboard "use F-keys as standard function keys" setting gets reset on system restart

    Hi all,
    I have set in system preferences -> keyboard to "use f1, f2 etc. keys as standard function keys" or rather I want to keep this setting set but unfortunately this gets reset on each restart-
    I'm wondering what happened, this used to work initially with Lion. I may have set somewhere something that resets this on each start but I have no clue what that might be.
    Machine iMac mid 2011, keyboard Apple alu keyboard with cable (pre-Lion layout).

    Thanks BDAqua...sure looked like the function had disappeared over time and appreciate the confirmaion. Hard to understand why a function like that would be taken away. The program I run uses function keys f3,f7,f11 and f23(shifted f11) and I have all working okay by turning them off in keyboard and mouse menus. The f23 is causing issued in that when I use shifted f11 the screen scrolls upward instead of passing along the f23 function. Looks like I will have to work around this since the operating system will not allow the function keys to just work "standard"...thanks by the way for the welcome...!!

  • Standard Text Key

    Hello All
    Kindly suggest, is there any posibility to attach STANDARD TXT KEY (CA10) in maintenance plan some where, Its already there in maintenance work order,
    but i want the same thing i preventive one, so that no need to go fill same manuallly.
    Regards
    kapil

    Hi
    use the standard text key in task lists operation. it can be copied to preventive orders.
    Regards
    Seenu

  • Mass change for QM at operation level in routing

    Dear Experts,
    I have to carry out mass change for Quality Management at operation level in routing. The steps that I am carrying out for an individual record are as follows.
    1.     CA02
    2.     Inspection point 100 is maintained at header level
    3.     Go to operation level
    4.     At operation level work center and control key have been maintained
    5.     Double click on operation
    6.     When I scroll down here I go to Quality Management: Inspection Points view.
    7.     There by default in Insp.pointCompletion system shows the option as u201CQuantity, valuation (production) and radio button selected default indicates u201CQty-relatedu201D
    8.     I want to change these options as only u201CValuationu201D and u201CNo relationu201D respectively
    My queries are,
    1.     Is there any T-code available to carry out these changes in mass?
    2.     Is it possible to do this without any Z development?
    I am doubtful about using LSMW here. I would be highly grateful to you if someone can help me step by step.
    Thanking you,
    Anand Rao

    Hi Sujit,
    Thanks for your reply!
    I tried CWBQM. Unfortunately could not succeed. I think may not be feasible through CWBQM.
    But I came across T-Code CEWB . There I opted "SAP_OPERATION" as working area and it worked. Its quite useful T-Code.
    Thanks again for your input.
    Regards,
    Anand Rao

  • "Use all F1, F2, etc. keys as standard function keys" checkbox missing in System Preferences/Keyboard since upgrade to OS X 10.9.5

    Since the last update to OS X 10.9.5, I no longer have a checkbox to use all F keys as standard function keys.  I've looked for any other possible solutions but can find none.  I have the 2007 aluminum keyboard (three batteries) with the latest firmware upgrade.
    Thanks.

    Thanks BDAqua...sure looked like the function had disappeared over time and appreciate the confirmaion. Hard to understand why a function like that would be taken away. The program I run uses function keys f3,f7,f11 and f23(shifted f11) and I have all working okay by turning them off in keyboard and mouse menus. The f23 is causing issued in that when I use shifted f11 the screen scrolls upward instead of passing along the f23 function. Looks like I will have to work around this since the operating system will not allow the function keys to just work "standard"...thanks by the way for the welcome...!!

Maybe you are looking for