Standard text printed only on one line

Hi experts,
I have a standard text in several lines:
Line 1
Line 2
Line 3
but in the pdf form it's printing in the same line:
Line 1 Line 2 Line 3...
Any suggestions ?
/Kiehn

Hello!
1) When you say you have Standard text is several line that does not mean, that system have is in several lines.
I don't know if you are aware or not, but while SAP system always stores long texts in 70 (or about so) char segments the fact that they are printed on one or several lines is controlled solely by formatting column that precedes each line in TLINES table. So, does your text has line breaks or new paragraph marks before those lines?
2) If everything in above is correct, than maybe you have to check the format you use to transfer text from SAP to Adobe (in interface/context). Please, recheck what is stated [here at SAP Library|http://help.sap.com/saphelp_nw70/helpdata/en/04/ecfab99fc345f8826490df387aaf82/frameset.htm]. All this together with correct format for field (Rich text or Plain text) plus (as stated by poster above) "Allow multiple lines" and "Expand to Fit" (vertically) formatting should do the trick.
Regards,
Petr Perstnev

Similar Messages

How do I get my printer to print only on one side of the paper?

I want to print only on one side of the papger. But machine prints out on both sides. When I remove the duplexer at back of machine, the paper flies out the back and printing error says no paper. I'm going nuts. I am a writer and can only submit material on one side of the paper. I just got this machine and hate that it has no manual and the manual on line is beyond me. I need simple easy to understand instructions for my simple brain. thanks

Hi,
Follow these steps to disable two sided printing:
Open the file you would like to print. From the File menu select Print. The Print window appears.
NOTE: The Print window might be minimized. Click the Show Details button to see all available settings.
Click the settings drop down, it will usually appear as the name of the program (e.g. TextEdit)
Will appear as Copies & Pages within Microsoft Office applications.
Select Layout from the drop-down menu.
Set the Two-Sided option as Off.
You may save the settings as a preset by clicking Presets > Save Current Settings as Preset...
By doing so and completing the print job these settings will remain default till another preset will be used in the future.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Standard text printing missing on Smartform

Hi All,
I am using standard text in Smartform.
Standard text contains 'terms and conditions' hence it's used for printing in second page.
For printing standard text one window other than Main window has been created in second page.
Now when I am taking print preview of smartform only two pages are visible and on second page complete standard text is not displayed. As standard text is of two pages then rest missing text should come on third page as a continuity.
But missing standard text is not getting diplayed.
Any suggestion what shall we do to print complete standard text.
Regards,
Amit
Edited by: Amit Singh on Nov 25, 2010 11:38 AM
Edited by: Amit Singh on Nov 25, 2010 11:39 AM
Edited by: Amit Singh on Nov 25, 2010 11:39 AM

I tried to use the 2nd option provided by you but still this prolem is not resolved.
Missing Standard text is not going in a new page.
I tried to expand the window size and now entire text is coming in a single page. But by this way page window is not same as in a first page.
Is there any otherway to print the rest missing text in next page of the smartform.
Regards,
Amit

Sapscript Standard Text Printing - Format Problem

Heros,
I wanted to print one standard text(Basic Text of Process order) in sapscript.I am using the INCLUDE command instead of Read_text FM , so that I can keep the Paragraphs of that text intact.But I am falling short of two requirements of my client.
1. He has highlighted Some words of the text and underlined some of the text. He wants that character format intact in spascript.How can I do that?
2. The script initaly was using Read_Text and was storing the value in a variable wa_line and was printing in script as
[LI ] DESCRIPTION: &wa_line&
so it was printing like
DESCRIPTION: fasfoihfaishfiahfiafhfihfahfiashfiahfahfiafiasfihahfisahfafasi
But now I am using INCLUDE command as follows
[LI] DESCRIPTION:
[: /] INCLUDE OBJECT BLAH BLAH
So it is printing like
DESCRIPTION:
fasfoihf
aishfiahfiafhfihfa
hfiashfiahfa
hfiafiasfihahfisahfafasi
I want to get them in same line.
I mean
DESCRIPTION: fasfoihf
aishfiahfiafhfihfa
hfiashfiahfa
hfiafiasfihahfisahfafasi
Is that possible?
Reward Point Guranteed.

Hi Anid,
When you are creating your standard text the default value in the tag column is *. If you change this value to = (Extended line) the display of standard text will start in the same line as the previous value (in your case it will display the standard text in the same line as DESCRIPTION:).
Hope this solves your problem!
Regards,
Saurabh

When i reply to a group text it only shows one recipient and says "failed to send"

I receive a text from a group thread I've been in for ears, when I open the text and respond, it only shows one of the members in the "to" line and then wont let me send any messages. any ideas? Also, if I'm typing a text and I get another text the whole keyboard locks and goes black until the text notification goes away. is this supposed to happen?

Yes, that is correct.

Header Details to be Printed only for the line item details.

Hi All,
I have the following requirement.
I have Page1 with the Logo, Header Window, Vendor Window, Send Invoice To, Delivere Invoice To and Main Window. Main Window Starts from the middle of the page. In the Page2 i have Logo, Header window and Main Window. In the Page3 i have only Main Window.
In the Footer of the Main Window i have Placed the Terms and conditions which should always be Printed in the New Page. So in the footer i have given a command "Go to New Page " and given the page as Page3.
The requirement is Logo,and Header Window should appear only for the Line items and not for the Terms and conditions.
For the Page1 i have given the Next Page as Page2. Suppose if there is only one line item then it Prints in the first Page itslef and the control flows to the Page2 and since in the page2 i have given the condition for the Logo and header window to print only if line item is more than 1 and since Main Window is starting from the middle there is a blank Space appearing in the start of the page.
The command i have given in the footer to trigger new page that is page3 is not getting triggered. If there are more than one line item then its printing the logo and header window and so there is no blank space appearing and it is working fine.
Please let me know how to avoid this blank space and move my main window to the start of the Page if there is only one line item.
Thank you.

Dear Vasudha,
I am a little bit confused regarding your query,
"In the Footer of the Main Window i have Placed the Terms and conditions which should always be Printed in the New Page. So in the footer i have given a command "Go to New Page " and given the page as Page3. "
When you say footer of main window does it mean , that you are using a table inside your main window and the command node your have inserted is in the footer of the table ?.I hope it is, because my suggestion is based on this assumption.
Well my suggestion for your issue is,
1.I hope you are aware we can trigger a next page in two ways, one by setting the next page static attribute & second using the command node which you have used.In your case you will have to use a combination of both.
2.I feel your First page design is ok. Set its static next page attribute to PAGE2. Similarly set the static next page attribute for PAGE2 as PAGE2 itself. This should take care of your table which you have placed in the main window. If the table contains only one lineitem it will get over in the first page itself. If the lineitems are more in the table, it will automatically triggerPAGE2 (since static next page attribute for PAGE1 is PAGE2) and the remaining line items will be displayed. Now no matter how many lineitems you have ,PAGE2 will be triggered repeatedly(since static next page for PAGE2 is PAGE2 itself) until the entire data in your table is displayed.
In this way your requirement of printing the logo and header windows for the data lineitems only will be fulfilled.
3.Now the last catch in your case is the printing of PAGE3(The terms and condition page) on an entirely new blank page.
In the footer section of the table which you have used, use a command node set to PAGE3. After the command node and under the same footer section now insert your terms and condition lineitem.
Also Check the "at End of table" checkbox and uncheck " AT PAGE BREAK" under OUTPUT OPTIONS tab for the footer section.
So now this footer section will be triggered only once after all the data in the table is displayed
4. So now if there is only one lineitem, before the default second page is triggered the command node will trigger the PAGE3 and the terms and condition will be displayed.Else if there are more lineitems the page2 will be triggered again and again and finally when all the lineitems are over, the footer of the table will get triggered. So the command node will take you to the PAGE3 wherin the terms and condition will only be displayed.
Hope this helps.
Regards,
Riju

Standard Text printing in SAP Scripts

Hi All,
Iam printing data from Standard Text it is printing
but i need like
                        Bank            ICICI
but the below is giving
                       Bank
ICICI
AS    ,,,,,,,,,,,,,,Bank,,,,,,,,
/:       INCLUDE &V_ACC& OBJECT TEXT ID ST LANGUAGE EN
Can you please tel me how to do

Hi,
    How your are creating the Standard text V_ACC in transaction SO10? create it with Contineous text, defailt will be as Command line(/:), thats why all the Standard texts will be printed on New line.
Tcode : SO10
Text Name :- V_ACC
Text Id      :- TEXT
Language:- EN
The text should be
ICICI                       "For Continues text paragraph format will be blank
not as below
/: ICICI                       "For New line text paragraph format will be /:
Now call the standard text in your Sapscript
AS    ,,,,,,,,,,,,,,Bank,,,,,,,,
/:       INCLUDE V_ACC OBJECT TEXT ID ST
Just check the tab spaces after Bank statement, if it is more Included text will be in next line.
Regards
Bala Krishna

Standard text printing in sapscripts in EN & DE Language....

HI All,
My requirement was very simple....
I have some 6-7 Layouts......
i want to replace some hard coded text with some other text in those layout when the layout language is DE .the text will be in german...
for all remaining langauges of the layout i want the text to be displayed in EN.
can i use Standard Text or mormal hard coding will do aa....How....can any one help me out with sample coding or navigation....
Thanks
Ganesh

Hi Kalandar,
The above solution was not working......I'll explain my problem clearly once again.
1. I have 6 layout to be changed in language DE
In the main window with tax text element i have some hard code in german language...that has to be replaced with some other sentence in german only(i have both the Sentences with me)
2. For the same 6 layouts to be changed in other languages(except DE)
same window ,same text element ,same hard code,but in English i have that to be replace with some other english sentence.
Simple to say in those 6 layouts if layout lang is DE then german sentence ,if lang other then DE...English sentence
Please check the possibility to use standard texts for this texts. Do u have to make any changes to program as well...
Plz help me out regarding this ...very important
Thanks
Ganesh

(Sub)Titles can only be one line?

I'm trying to add subtitles to a part of a video where somebody is speaking a foreign language, but the titles box in the movie pane only seems to allow one line of text at a time. Can this box's size be adjusted to fit two or three more lines of text in it? Otherwise I would be forced to make the subtitles smaller, and harder to see.
Cheers!

Hi
From text tools I select "Lower Third" (second first row) and it gives me two
lines.
By using a smaller font and NO Serif (as in Times) but eg Ariel (SanSerif) one
can squees in rather much text. Then adjusting the length of this to suit "say"
(spoken words). To cont. by next two lines one might need to do this by adding
more text to to next video-clip then move it back to where first one ends.
Rather tricky to do - alt. is to make a cut in the video-clip for next text lines to orient
too. May be an easier way to go. This cut will not be visibly only work as guide to
the text tool.
Third line - I didn't make this.
If You only get one - then trashing iMovie pref file might help it to get back on track.
Yours Bengt W

Utility to send text file over GPIB, one line at a time?

We are developing instrumentation that receives data and commmands over GPIB as plain text, and returns them as well. I'd like to create GPIB "batch" files and send them over the bus, one line at a time, so I can debug the instruments' behavior. I'd also like to be able to read back responses, one line at a time.
Is there such a utility? I've got our programmer working on something like this, but I'd hate to have him re-invent an existing wheel.
Thanks!

Apart from NI-SPY, I have not heard of such a utility. This may be simple to implement using proper termination. If the instrument is capable of sending line feeds or carriage return, you should be able to easily create a document. Also, using IBWRTF, you could write the ASCII file (containing the termination characters) to the bus. Depending on how you have your timeouts specified, this may be ideal.
Alternately, if you read a static amount of data, you could IBRD chunks of data. the result may need editing for broken words at the end of a line but would achieve such a result.
Ryan Mosley
National Instruments, Applications Engineer
http://www.ni.com/exchange

Ios7 messages how do you only delete one line not whole message

IOs7 messages how do you only delete only one line not whole message

Open your message conversation.
Tap and hold on one of the message bubbles until you see "Copy...More".
Tap on More and you should see a circle to the left of each message in your conversation with a checkmark next to the one that you originally tapped on.
Check each message bubble that you want to delete; then tap the Trash can in the bottom left corner of your screen.

Pretty Printer ONLY for selected lines in ABAP editor?

Hi,
I have done SETTINGS(Menu----Utilities) in PRETTY PRINTER in my ABAP editor that, all KEY WORDS shuld b in UPPER CASE.
Say, I hv written code(in raw format, not yet pressed the PRETTY PRITER) like below,
ABAP Code Line_1
ABAP Code Line_2
ABAP Code Line_3
ABAP Code Line_4
ABAP Code Line_5
I want to hv pretty printer format for Line 3 and Line 5 ONLY!! I do not want to hv it for other lines, so, I high lighted(selected) those lines (3 and 5) and pressed pretty printer, but, am getting the pretty printer format for all the rest of the code as a single shot!!
So, pls. let me know that, How I can get the pretty printer format ONLY for the lines, for which I wished(selected by high lighting)?
And also let me know, How Can I do automatic(not manually) indentation for my code as a part of pretty printer? Actually, I tried but, am not getting even though I checled the check box intendation in SETTINGS!!
Thank you

Hi ,
Preety printer will work on all the code that is avaliable in window,
In case. if you want to do partial , copy your code in seperate window and do Pretty Printer for it.
Refer http://help.sap.com/saphelp_nw04/helpdata/en/d1/801ad6454211d189710000e8322d00/frameset.htm for other queries.
Edited by: Harsh Bhalla on Nov 27, 2009 9:17 AM

Title/text effects just for one line?

Hi!
As far as I understood do the PE11 title/text effects work just for one line of text.
(1) How can I produce more lines text-effects with PE11 (and more complex, like 3D-animations)?
(2) If this is not possible, do you know any free/beginners software for doing that?
I look forward to reading your answers!
Best wishes,
Ronald

Ronald,
You are most welcome.
I am not sure what the limitation to one line of text is related to - the program coding? The animation algorithms? However, with a bit of planning, there are several ways around that limitation, but it throws people, when they first encounter it.
This article also has some tips on using Titler in Premiere (both Pro and Elements), and I have added some Adobe TV tutorials. Note: they are done in PrPro, so the interfaces will look differently, plus PrPro's Titler has some additional functions, that are not yet in PrE. Still, the basics are all the same, and I think that with a bit of interpolation, even the PrPro tutorials will be useful: http://forums.adobe.com/thread/1131177
Good luck, and happy titling,
Hunt

JButton text on more then one line

Hi everybody!
I would to like if it is possible for a JButton to have a text on more than 1 line! I wanna do something like:
JButton muButton = new JButton("MY" + "\n" + "BUTTON");
Thanks!

Hello Deepak,
you have to use HTML-tags:
new JButton("<html>Zeile 1 Zeile 2</html>");
Bye
J�rg

Deskjet 5525 printing random characters, one line per page when printing both sides of page

Hi. I have a deskjet 5525 wireless all in one printer.
I have installed all of the necessary hardware and have updated it. We have two computers running windows 7, 64 bit. I have not been able to update the firmware on the printer because the HP Device Updater program that does it cannot communicate with the printer via usb cable or wireless on two different computers I have tried.
When trying to print two sided documents, it will print ok for about two pages, but then, it will start printing on line per page of random characters, blurred lines of text, gargabe basically.
This is the second printer as the vendor replace the first one with the same problem. You would say, oh a software problem, but I have reinstalled the HP Deskjet 5520 series SW a couple of times, reinstalled the printer, but the problem continues.
An old HP deskjet 3845 worked for us pretty well on the same computers.
Please help.

Hi Onemangosta,
I would like to help with the garbled text you are experiencing. I have found a great document for you to use and I can also help you with the firmware update.
Troubleshoot text that might be gibberish, nonsense, or look garbled or scrambled
In order to update the firmware on your printer ensure the printer is on the wireless network and touch the Web Services icon (this icon is the 1st of the 4 that run across the top of the front panel - looks like 2 little cell phones). Scroll through the Web Services menu, find and select Product Updates, select Check for Product Updates.
If the printer is already up to date the front panel will say so, if it is not, the download and install will begin. It is possible you were unable to do the update form the computer because the printer does not need an update. The HP Device Updater will only see a printer that requires the update.
Hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Standard text printed only on one line

Similar Messages

Maybe you are looking for